The process of mixing clay, water and other ingredients to make brick is known as (A) Kneading (B) Moulding (C) Pugging (D) Drying

The process of mixing clay, water and other ingredients to make brick is known as
(A) Kneading
(B) Moulding
(C) Pugging
(D) Drying
by

1 Answer

Answer :

Answer: Option A
by

Related questions

Pug mill is used for (A) Preparation of clay (B) Moulding of clay (C) Drying of bricks (D) Burning of bric

Description : Pug mill is used for (A) Preparation of clay (B) Moulding of clay (C) Drying of bricks (D) Burning of bricks

Last Answer : Answer: Option A

The harmonious mixing of the clay ingredients, is known as (A) Weathering (B) Blending (C) Tempering (D) None of these

Description : The harmonious mixing of the clay ingredients, is known as (A) Weathering (B) Blending (C) Tempering (D) None of these

Last Answer : Answer: Option B

A pug mill is used for (A) Softening brick earth (B) Moulding brick earth (C) Tempering brick earth (D) Providing brick earth

Description : A pug mill is used for (A) Softening brick earth (B) Moulding brick earth (C) Tempering brick earth (D) Providing brick earth

Last Answer : Answer: Option C

The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known (A) Grading (B) Curing (C) Mixing (D) Batching

Description : The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known (A) Grading (B) Curing (C) Mixing (D) Batching

Last Answer : (D) Batching

The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known as [ A ] Curing [ B ] Mixing [ C ] Grading [ D ] Batching

Description : The process of proper and accurate measurement of concrete ingredients for uniformity of proportion, is known as [ A ] Curing [ B ] Mixing [ C ] Grading [ D ] Batching

Last Answer : [ D ] Batching

Mixing of plastic solids is generally facilitated by (A) Dispersion (B) Mastication (C) Kneading (D) None of these

Description : Mixing of plastic solids is generally facilitated by (A) Dispersion (B) Mastication (C) Kneading (D) None of these

Last Answer : (C) Kneading

Mixing mechanism employed in a pan mixer is by (A) Mulling (B) Kneading (C) Dispersion (D) None of these

Description : Mixing mechanism employed in a pan mixer is by (A) Mulling (B) Kneading (C) Dispersion (D) None of these

Last Answer : (A) Mulling

A pug mill is used for a) Softening brick earth b) Moulding brick earth c) Tempering brick earth* d) Compacting brick earth

Description : A pug mill is used for a) Softening brick earth b) Moulding brick earth c) Tempering brick earth* d) Compacting brick earth

Last Answer : c) Tempering brick earth*

Carbonisation of coal consists of  A. drying and crushing the coal to a fine powder  B. moulding the finely ground coal under pressure with or without a binding material  C. heating the wood with a limited supply of air to temperature not less than 280°C  D. none of the above

Description : Carbonisation of coal consists of  A. drying and crushing the coal to a fine powder  B. moulding the finely ground coal under pressure with or without a binding material  C. heating the wood with a limited supply of air to temperature not less than 280°C  D. none of the above

Last Answer : Answer: D

Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating process (C) The plastic articles made by placing raw material in the desired moulds, is known as moulding process (D) All the above

Description : Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating ... placing raw material in the desired moulds, is known as moulding process (D) All the above

Last Answer : Answer: Option D

Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Description : Pick up the constituent of good brick earth whose excess causes the raw bricks shrink and warp during drying and burning, from the following: (A) Alumina (B) Lime (C) Iron-oxide (D) Magnesia

Last Answer : Answer: Option A

Excess of alumina in brick earth makes the brick (A) Impermeable (B) Brittle and weak (C) To lose cohesion (D) To crack and warp on drying

Description : Excess of alumina in brick earth makes the brick (A) Impermeable (B) Brittle and weak (C) To lose cohesion (D) To crack and warp on drying

Last Answer : Answer: Option D

Which of the following ingredients of the brick earth enables the brick to retain its shape? (A) Alumina (B) Silica (C) Iron (D) Magnesia

Description : Which of the following ingredients of the brick earth enables the brick to retain its shape? (A) Alumina (B) Silica (C) Iron (D) Magnesia

Last Answer : Answer: Option B

Clay and silt content in a good brick earth must be at least (A) 50 % (B) 40 % (C) 30 % (D) 25 %

Description : Clay and silt content in a good brick earth must be at least (A) 50 % (B) 40 % (C) 30 % (D) 25 %

Last Answer : Answer: Option A

The basic action involved in sheep foot rolling is (A) Kneading (B) Pressing (C) Tamping (D) Vibration

Description : The basic action involved in sheep foot rolling is (A) Kneading (B) Pressing (C) Tamping (D) Vibration

Last Answer : (A) Kneading

Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Description : Coke oven gas after passing through return electrostatic tar precipitator (RETP) is used for the (A) Hot scarfing of steel slabs (B) Mixing with blast furnace gas (C) Coke oven battery heating (D) Steel ladle drying

Last Answer : (C) Coke oven battery heating

Explain the following unit operations: (i) Mixing (ii) Drying (iii) Evaporation (iv) Absorption.

Description : Explain the following unit operations: (i) Mixing (ii) Drying (iii) Evaporation (iv) Absorption.

Last Answer : i)Mixing: Mixing is carried out for producing simple mixtures, accomplishing dispersions and promoting chemical reactions. It is a process in which two separate materials such as two different ... ammonia mixture by water 2) Removal of hydrogen sulfide from naturally occurring hydrocarbon gases.

Which of the following ingredients of Brick earth enables the brick to retain its shape a) Alumina b) Silica* c) Iron d) Magnesia

Description : Which of the following ingredients of Brick earth enables the brick to retain its shape a) Alumina b) Silica* c) Iron d) Magnesia

Last Answer : b) Silica*

Which of the following clay mixing devices is vacuum operated for deairation of clay? (A) Banbury mixer (B) Pug mill (C) Muller-mixer (D) None of these

Description : Which of the following clay mixing devices is vacuum operated for deairation of clay? (A) Banbury mixer (B) Pug mill (C) Muller-mixer (D) None of these

Last Answer : (B) Pug mill

Explain the manufacturing of burnt clay brick.

Description : Explain the manufacturing of burnt clay brick.

Last Answer : Manufacturing of Burnt Clay Brick consists of a) Preparation of clay. B) Moulding c) Drying d) Burning. a) Preparation of Clay: Unsoiling of clay consists of removal or vegetations and ... the bricks are stacked without any fuel and burnt from fire places and produces better quality of bricks.

PROBLEM FA sample of soft saturated clay weighs 350 grams and has a volume of 205cc. After oven drying, the soil weighs 225 grams. Calculate the values of saturated unit weight, void ratio, porosity and specific gravity?

Description : PROBLEM FA sample of soft saturated clay weighs 350 grams and has a volume of 205cc. After oven drying, the soil weighs 225 grams. Calculate the values of saturated unit weight, void ratio, porosity and specific gravity?

Last Answer : {

__________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Description : __________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Last Answer : (C) Injection

Production of a hollow product by inflation of a tube or parison is called the __________ process. (A) Blow moulding (B) Calendaring (C) Extrusion (D) Injection

Description : Production of a hollow product by inflation of a tube or parison is called the __________ process. (A) Blow moulding (B) Calendaring (C) Extrusion (D) Injection

Last Answer : (A) Blow moulding

Uniform ramming of sand in green sand moulding process leads to (A) Reduced chance of gas porosity (B) Greater dimensional stability of the casting (C) Uniform flow of molten metal into the mould cavity (D) Less sand expansion type of casting defect

Description : Uniform ramming of sand in green sand moulding process leads to (A) Reduced chance of gas porosity (B) Greater dimensional stability of the casting (C) Uniform flow of molten metal into the mould cavity (D) Less sand expansion type of casting defect

Last Answer : Option B

A tip for kneading, please?

Description : A tip for kneading, please?

Last Answer : Each cycle (or “knead”, as you say) involves pushing the dough out with the heel of the hand, then folding it back onto itself, then doing the ¼ turn.

Why does my kitty fall asleep while kneading?

Description : Why does my kitty fall asleep while kneading?

Last Answer : it’s like when humans get a massage, they close their eyes but aren’t necessarily asleep. my babies do this too. i think they just are enjoying themselves.

Do you think it's too late to start kneading at the age of 40?

Description : I want to start looking at it somehow.

Last Answer : I don't think it's too late! You can still have 10-15 good years in the sport and you don’t have to stop after that. :) 

Kneading brooms in a home bakery

Description : What is it like when the dough is mixed, then the whisks are taken out, or is it baked with them and then taken out of the finished bread?

Last Answer : Both are possible. If you have the time (and taste), you take care of the mixing and take out the "hooks" before baking. If you don't have time or you don't want to, you'll take them out of the loaf.

Why do cats like kneading and licking people?

Description : Why do cats like kneading and licking people?

Last Answer : because they like the people they like each other

The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option B

The portion of a brick cut to form angles other than right angles in plan, is known as (A) Queen closer (B) King closer (C) Closer (D) Squint brick

Description : The portion of a brick cut to form angles other than right angles in plan, is known as (A) Queen closer (B) King closer (C) Closer (D) Squint brick

Last Answer : Answer: Option D

Which of the manufacturing processes is/are required to make a typical stainless steel spoon out of sheet metal? A. Casting B. Forming C. Brazing D. Blow moulding

Description : Which of the manufacturing processes is/are required to make a typical stainless steel spoon out of sheet metal? A. Casting B. Forming C. Brazing D. Blow moulding

Last Answer : Forming

The process of mixing, transporting, placing and compacting concrete using Ordinary Port land Cement should not take more than (A) 30 minutes (B) 40 minutes (C) 60 minutes (D) 90 minutes

Description : The process of mixing, transporting, placing and compacting concrete using Ordinary Port land Cement should not take more than (A) 30 minutes (B) 40 minutes (C) 60 minutes (D) 90 minutes

Last Answer : Answer: Option A

The process of mixing, transporting, placing and compacting the cement, concrete should not take more than. (a) 30 minutes (b) 60minutes (c) 90 minutes (d) 120mm

Description : The process of mixing, transporting, placing and compacting the cement, concrete should not take more than. (a) 30 minutes (b) 60minutes (c) 90 minutes (d) 120mm

Last Answer : (a) 30 minutes

__________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion

Description : __________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion

Last Answer : (C) Transfer

Paper like thin plastic articles can be produced by (A) Blow moulding (B) Vacuum thermo forming (C) Injection moulding (D) None of these

Description : Paper like thin plastic articles can be produced by (A) Blow moulding (B) Vacuum thermo forming (C) Injection moulding (D) None of these

Last Answer : (B) Vacuum thermo forming

Plastic articles are normally produced by __________ moulding. (A) Green sand (B) Injection (C) Shell (D) Dry sand

Description : Plastic articles are normally produced by __________ moulding. (A) Green sand (B) Injection (C) Shell (D) Dry sand

Last Answer : (B) Injection

Plastic tubes & pipes are generally made by __________ moulding. (A) Injection (B) Transfer (C) Extrusion (D) Compression

Description : Plastic tubes & pipes are generally made by __________ moulding. (A) Injection (B) Transfer (C) Extrusion (D) Compression

Last Answer : (C) Extrusion

Tyres are made by (A) Injection moulding (B) Extrusion (C) Rotational moulding (D) Compression moulding

Description : Tyres are made by (A) Injection moulding (B) Extrusion (C) Rotational moulding (D) Compression moulding

Last Answer : (C) Rotational moulding

Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The passage between the nozzle and the __________ is called 'sprue' in case of injection moulding. (A) Runner (B) Cylinder (C) Mold (D) None of these

Description : The passage between the nozzle and the __________ is called 'sprue' in case of injection moulding. (A) Runner (B) Cylinder (C) Mold (D) None of these

Last Answer : (A) Runner

A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Description : A jet engine turbine blade is normally manufactured by (A) Forging (B) Shell moulding (C) Investment casting (D) Pressure die casting

Last Answer : (C) Investment casting

What is moulding?

Description : What is moulding? 

Last Answer : Moulding is the process of giving required shape & size to the plastic material (like concrete / clay) till it harden by external surface support. 

Properties of moulding sand are

Description : Properties of moulding sand are

Last Answer : Properties of moulding sand are: i) Cohesiveness or (strength) of sand,  ii) Permeability (Porosity) iii) Plasticity  iv) Thermal Stability v) Refractoriness  vi) Flow ability, vii) ... be reusable and should produce good casting surface. x) It should be bad conductor of heat.

Explain any four properties of Moulding sand.

Description : Explain any four properties of Moulding sand. 

Last Answer : 1. Porosity: Molten metal always contain a certain amount of dissolved gases, which are evolved when the metal freezes the molten metal coming in contact with the moist sand , generates steam or ... to the casting. Refractoriness is measured by the sinter point of the sand rather than its melting

Pick up the correct statement from the following: (A) Alexander Parkes, a Scottish chemist prepared a hard material by mixing camphor and alcohol with nitro cellulose and called it, as Parkesite (B) Dr. L. Bakeland, a Belgian scientist prepared a product known as Bakelite (C) Pollark, an Austrian scientist prepared a substance from urea and formaldehyde and called it Plastic (D) All the above

Description : Pick up the correct statement from the following: (A) Alexander Parkes, a Scottish chemist prepared a hard material by mixing camphor and alcohol with nitro cellulose and called it, as Parkesite ... prepared a substance from urea and formaldehyde and called it Plastic (D) All the above

Last Answer : Answer: Option D

The portion of the brick cut across its width and having its length equal to that of a full brick, is known as (A) Closer (B) Queen closer (C) King closer (D) Prince closer

Description : The portion of the brick cut across its width and having its length equal to that of a full brick, is known as (A) Closer (B) Queen closer (C) King closer (D) Prince closer

Last Answer : Answer: Option B

In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as (A) English bond (B) Double Flemish bond (C) Zigzag bond (D) Single Flemish bond

Description : In brick masonry the bond produced by laying alternate headers and stretchers in each course is known as (A) English bond (B) Double Flemish bond (C) Zigzag bond (D) Single Flemish bond

Last Answer : Answer: Option B

The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Description : The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as (A) Trowelling (B) Laying (C) Grouting (D) Placing

Last Answer : Answer: Option B

The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the

Description : The brick laid with its length parallel to the face of a wall, is a known as (A) Header (B) Stretcher (C) Closer (D) None of the

Last Answer : Answer: Option B