Absorbed moisture contents affect the dielectric strength________.

Absorbed moisture contents affect the dielectric strength________.
by

3 Answers

Answer :

Absorbed moisture contents affect the dielectric strength indirectly

by

Answer :

Indirectly
by

Answer :

indirectly 
by

Related questions

Compared to older tetracyclines, doxycycline produces a lower incidence of superinfection diarrhoea because (a) It is completely absorbed in the small intestines so that drug concentration in the colonic contents is low (b) It is inactivated by the gut microflora (c) It is not active against the microbes of the normal gut flora (d) It is a potent tetracycline and inhibits the superinfection causing microbes as well

Description : Compared to older tetracyclines, doxycycline produces a lower incidence of superinfection diarrhoea because (a) It is completely absorbed in the small intestines so that drug concentration in the colonic ... (d) It is a potent tetracycline and inhibits the superinfection causing microbes as well

Last Answer : Ans: A

Compared to older tetracyclines, doxycycline produces a lower incidence of superinfection diarrhoea because: A. It is completely absorbed in the small intestines so that drug concentration in the colonic contents is low B. It is inactivated by the gut microflora C. It is not active against the microbes of the normal gut flora D. It is a potent tetracycline and inhibits

Description : Compared to older tetracyclines, doxycycline produces a lower incidence of superinfection diarrhoea because: A. It is completely absorbed in the small intestines so that drug concentration in the colonic contents ... the microbes of the normal gut flora D. It is a potent tetracycline and inhibits

Last Answer : A. It is completely absorbed in the small intestines so that drug concentration in the colonic contents is low

The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Description : The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Last Answer : (B) T

Researchers describe seed moisture contents in terms of : a. Dry weight b. Wet weight c. Percent weight d. a & b

Description : Researchers describe seed moisture contents in terms of : a. Dry weight b. Wet weight c. Percent weight d. a & b

Last Answer : a & b

Bulking of sand is caused due to (A) Surface moisture (B) Air voids (C) Viscosity (D) Clay contents

Description : Bulking of sand is caused due to (A) Surface moisture (B) Air voids (C) Viscosity (D) Clay contents

Last Answer : Answer: Option A

The strength of durability of concrete depends upon. (a) Size of aggregates (b) Grading of aggregates (c) Moisture contents of aggregates (d) All of these.

Description : The strength of durability of concrete depends upon. (a) Size of aggregates (b) Grading of aggregates (c) Moisture contents of aggregates (d) All of these.

Last Answer : (d) All of these.

Moisture absorbed in the windings or condensed on the surface of electrical machinery insulation ________. A. is good for long term preserving since most insulation is organic and contains some amount B. lowers the insulation value and is a common cause of fault grounds in idle machines C. will enhance insulation resistance only if it is fresh water and contains no salt D. reduces the amount of current supplied or drawn by the machine so horsepower is limited

Description : Moisture absorbed in the windings or condensed on the surface of electrical machinery insulation ________. A. is good for long term preserving since most insulation is organic and contains some amount B. ... D. reduces the amount of current supplied or drawn by the machine so horsepower is limited

Last Answer : Answer: B

The initial basin recharge is equal to (A) Interception (B) Depression storage (C) Rain absorbed by the moisture deficiency (D) All the above

Description : The initial basin recharge is equal to (A) Interception (B) Depression storage (C) Rain absorbed by the moisture deficiency (D) All the above

Last Answer : Answer: Option D

The cement becomes useless if its absorbed moisture content exceeds (A) 1 % (B) 2 % (C) 3 % (D) 5 %

Description : The cement becomes useless if its absorbed moisture content exceeds (A) 1 % (B) 2 % (C) 3 % (D) 5 %

Last Answer : Answer: Option D

The cement becomes useless if its absorbed moisture content exceeds [ A ] 1% [ B ] 2% [ C ] 3% [ D ] 5%

Description : The cement becomes useless if its absorbed moisture content exceeds [ A ] 1% [ B ] 2% [ C ] 3% [ D ] 5%

Last Answer : [ D ] 5%

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

How the moisture content of the aggregates obtainable at site affect the water content ratio specified?

Description : How the moisture content of the aggregates obtainable at site affect the water content ratio specified?

Last Answer : Obviously, if the aggregates are in a surface wet condition, meaning the moisture content is greater than the absorption, that surface water increases the water-to-cement ratio and affects strength and durability.

Occurrence of 'case hardening' during drying of a high moisture solid cake __________ the drying rate. (A) Increases (B) Decreases (C) Does not affect

Description : Occurrence of 'case hardening' during drying of a high moisture solid cake __________ the drying rate. (A) Increases (B) Decreases (C) Does not affect

Last Answer : (B) Decreases

Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the flooding velocity, generally (C) 'Elution' means the desorption of the adsorbed solute by a solvent (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Which of the following factors does not affect the nitrification ? (A) Air (B) Seed (C) Temperature (D) Moisture

Description : Which of the following factors does not affect the nitrification ? (A) Air (B) Seed (C) Temperature (D) Moisture

Last Answer : (B) Seed

State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials.

Description : State failure phenomena observed in insulating material. State four reasons for failure of gaseous and solid dielectric materials. 

Last Answer : Failure phenomena in insulating material means the dielectric property fails :  The dielectric failure mean the dielectric strength of insulating material reduces due to high voltages or high ... 6. Due to poor maintenance of insulating material there may be possibility dielectric failure 

Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Description : Write one application for the give dielectric material. (i) Polyvinyl Carbide(PVC) (ii) Glass (iii) Mica (iv) Cotton and Silk

Last Answer : (i) Polyvinyl Carbide(PVC):it is used in insulation of wires and cables in domestic wiring as well as in aircraft and factory wiring (any one)  (ii) Glass: 1) Alkaline glasses are used for ... with wax or varnishes are used in windings of magnet coils and small medium sized mechanics (any one) 

State any four dielectric materials.

Description : State any four dielectric materials.

Last Answer : Ceramics, distilled water, paper, mica, polyethylene, and glass. Metal oxides

Define breakdown voltage and dielectric strength of a capacitor.

Description : Define breakdown voltage and dielectric strength of a capacitor.

Last Answer : Breakdown Voltage: The voltage at which the dielectric material breaks down (Starts conducting or is no longer remains as an insulator) for a specified thickness, is called its breakdown ... without breaking down (without losing its dielectric property) is called its dielectric strength. 

Define : (i) Dielectric strength (ii) Breakdown voltage

Description : Define : (i) Dielectric strength (ii) Breakdown voltage

Last Answer : (i) Dielectric strength: The voltage which a dielectric material can withstand without breaking down (without losing its dielectric property) is called its dielectric strength. It is represented by kV/mm ... or is no longer an insulator) for a specified thickness, is its breakdown voltage. 

What is dielectric strength of an insulating material? What is its unit?

Description : What is dielectric strength of an insulating material? What is its unit?

Last Answer : Dielectric Strength: The dielectric strength of an insulating material is the maximum voltage which the insulating medium can withstand without breakdown. Unit is volts per millimeter (V/mm), or kV/mm or kV/cm

Define dielectric strength for a capacitor.

Description : Define dielectric strength for a capacitor.

Last Answer : Ans: Di-electric Strength for a capacitor: The voltage which a dielectric material can withstand without breaking down (without losing its dielectric property) is called as dielectric strength.

The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to

Description : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to   (A) Polarization (B) Conductivity (C) Structural homogeneties (D) Ionization

Last Answer : The presence of alkali oxides in alumino silicate ceramics is likely to result in dielectric breakdown due to Conductivity 

For an insulating material, dielectric strength and dielectric loss should be respectively

Description : For an insulating material, dielectric strength and dielectric loss should be respectively   (A) high and high (B) low and high (C) high and low (D) low and low.

Last Answer : For an insulating material, dielectric strength and dielectric loss should be respectively  high and low 

The dielectric strength of impregnated papers is about

Description : The dielectric strength of impregnated papers is about   (a) 20 kV/mm (b) 30 kV/mm (c) 15 kV/mm (d) 5 kV/mm 

Last Answer : The dielectric strength of impregnated papers is about 30 kV/mm

The power factor of dielectric :

Description : The power factor of dielectric :  (A) is a function of temperature of the dielectric only (B) depends only on voltage stress to which the dielectric is stressed (C) always constant (D) both (A) and (B)

Last Answer : The power factor of dielectric :  (A) is a function of temperature of the dielectric only (B) depends only on voltage stress to which the dielectric is stressed (C) always constant (D) both (A) and (B)

With the help of which bridge are the capacitance and dielectric loss of a capacitor generally measured ?

Description : With the help of which bridge are the capacitance and dielectric loss of a capacitor generally measured ?

Last Answer : With the help of Schering bridge are the capacitance and dielectric loss of a capacitor generally measured.

The imaginary part of dielectric constant determines

Description : The imaginary part of dielectric constant determines (a) Component of current which is in phase with the applied field (b) Component of energy absorbed per m3 (c) Amount of applied field (d) Component of voltage which is in phase with the applied field

Last Answer : The imaginary part of dielectric constant determines Component of current which is in phase with the applied field

The depth of penetration of a wave in a lossy dielectric medium increases with

Description : The depth of penetration of a wave in a lossy dielectric medium increases with 

Last Answer : The depth of penetration of a wave in a lossy dielectric medium increases with Increasing wavelength

The measurement of dielectric loss and power factor is done using...

Description : The measurement of dielectric loss and power factor is done using  (A) Weins Bridge (B) Hays Bridge (C) Schering Bridge (D) Wheat Stone Bridge 

Last Answer : C Schering brigde

For making capacitors, it is better to select a dielectric having_________.

Description : For making capacitors, it is better to select a dielectric having_________.

Last Answer : For making capacitors, it is better to select a dielectric having high permittivity.

Voltage applied across a ceramic dielectric produces an electrostatic...

Description : Voltage applied across a ceramic dielectric produces an electrostatic field 100 times greater than in air. The dielectric constant? of the ceramic equals________. 

Last Answer : Voltage applied across a ceramic dielectric produces an electrostatic field 100 times greater than in air. The dielectric constant? of the ceramic equals 100.

Not all dielectric dielectric , but why not all dielectric dielectric ?

Description : Not all dielectric dielectric , but why not all dielectric dielectric ?

Last Answer : The substances in which electrons can move freely are called conductive. Again, substances through which electrons cannot move freely are called non-conductive. Non-conductive substances that are polarized ... . So not all die-electric non-conductive but not all non-conductive die-electric.

A dielectric slab of thickness `d` is inserted in a parallel plate capacitor whose negative plate is at `x = 0` and positive plate is at `x = 3d`. The

Description : A dielectric slab of thickness `d` is inserted in a parallel plate capacitor whose negative plate is at `x = 0` and positive plate is at `x = 3d`. The

Last Answer : A dielectric slab of thickness `d` is inserted in a parallel plate capacitor whose negative plate ... at fist, then decreases and again increase.

Identical dielectric slabs are inserted into two identical capacitors `A` and `B`. These capacitors and a battery are connected as shown in figure. No

Description : Identical dielectric slabs are inserted into two identical capacitors `A` and `B`. These capacitors and a battery are connected as shown in figure. No

Last Answer : Identical dielectric slabs are inserted into two identical capacitors `A` and `B`. These capacitors ... , which fully appears as heat in the circuit

What is the dependence of mechanical force per unit area of charged conductor on the surface charge density and the dielectric constant of the medium

Description : What is the dependence of mechanical force per unit area of charged conductor on the surface charge density and the dielectric constant of the medium

Last Answer : What is the dependence of mechanical force per unit area of charged conductor on the surface charge density and the dielectric constant of the medium

Why is the dielectric strength of vacuum infinite?

Description : Why is the dielectric strength of vacuum infinite?

Last Answer : The dielectric strength of vacuum is infinite because there isno molecule in the vacuum.

Emulsifier protection is associated with: a) Grounding protection b) Dielectric strength protection of cables and conductors c) Lightning protection d) Fire protection

Description : Emulsifier protection is associated with: a) Grounding protection b) Dielectric strength protection of cables and conductors c) Lightning protection d) Fire protection

Last Answer : Ans: D

_________is a form of non-volatile storage that operates by changing the resistance of a specially formulated solid dielectric material. A. VRAM B. WRAM C. MRAM D. RRAM

Description : _________is a form of non-volatile storage that operates by changing the resistance of a specially formulated solid dielectric material. A. VRAM B. WRAM C. MRAM D. RRAM

Last Answer : D. RRAM Resistive RAM

The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength of the insulation B. the paint dust is composed of abrasive and semi-conducting materials which impair insulation C. paint dust buildup has a tendency to cause corrosion D. phase windings frequently become isolated from each other due to dust interference at the terminals

Description : The removal of paint from electrical equipment, such as generators, should be cautiously undertaken because ____________. A. the mechanical shock of paint removal lessens the dielectric strength ... phase windings frequently become isolated from each other due to dust interference at the terminals

Last Answer : Answer: B

Which of the listed conditions could indicate the need for cleaning electrical insulation? A. Low ambient temperature B. Low operating temperature C. High dielectric strength D. Low megger readings

Description : Which of the listed conditions could indicate the need for cleaning electrical insulation? A. Low ambient temperature B. Low operating temperature C. High dielectric strength D. Low megger readings

Last Answer : Answer: D

The 'dielectric constant' of dry air or a vacuum is _______. A. 1 B. 10 C. 100 D. 1000

Description : The 'dielectric constant' of dry air or a vacuum is _______. A. 1 B. 10 C. 100 D. 1000

Last Answer : Answer: A

The 'dielectric constant' is a numerical value indicating the effectiveness of a dielectric material in comparison to that of a standard, which is _______________. A. paper or cloth B. glass or mica C. plastic or Teflon D. dry air or a vacuum

Description : The 'dielectric constant' is a numerical value indicating the effectiveness of a dielectric material in comparison to that of a standard, which is _______________. A. paper or cloth B. glass or mica C. plastic or Teflon D. dry air or a vacuum

Last Answer : Answer: D

When a megohmmeter is used to test the insulation of a large motor, the initial dip of the pointer toward 'zero' is caused by ____________. A. good insulation B. the capacitance of the windings C. the leakage of the current along the surface of dirty insulation D. the dielectric-absorption effect of the insulation

Description : When a megohmmeter is used to test the insulation of a large motor, the initial dip of the pointer toward 'zero' is caused by ____________. A. good insulation B. the capacitance of the ... of the current along the surface of dirty insulation D. the dielectric-absorption effect of the insulation

Last Answer : Answer: B

The dielectric strength of a vacuum or dry air is approximately ________________. A. 450 volts/inch B. 1000 volts/inch C. 20-kv/inch D. 50-kv/inch

Description : The dielectric strength of a vacuum or dry air is approximately ________________. A. 450 volts/inch B. 1000 volts/inch C. 20-kv/inch D. 50-kv/inch

Last Answer : Answer: C

A 'dielectric' is a/an ________________. A. electrical insulator B. current flow C. good conductor D. semiconductor material

Description : A 'dielectric' is a/an ________________. A. electrical insulator B. current flow C. good conductor D. semiconductor material

Last Answer : Answer: A

A megohmmeter is used to measure _____________. A. voltage B. dielectric strength C. current D. power

Description : A megohmmeter is used to measure _____________. A. voltage B. dielectric strength C. current D. power

Last Answer : Answer: B

When using a megohmmeter to test the dielectric strength of wire insulation, a continuous series of slight downscale kicks by the pointer is result of ____________. A. good insulation B. the leakage of current along the surface of dirty insulation C. the capacitance of the windings D. the dielectric-absorption effect of the insulation

Description : When using a megohmmeter to test the dielectric strength of wire insulation, a continuous series of slight downscale kicks by the pointer is result of ____________. A. good insulation B. the ... dirty insulation C. the capacitance of the windings D. the dielectric-absorption effect of the insulation

Last Answer : Answer: B

When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of current along the surface of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Description : When a megohmmeter is used to test the dielectric strength of wire insulation, the initial dip of the pointer toward 'zero' is caused by _____________. A. good insulation B. the leakage of ... of dirty insulation C. the capacitance of the circuit D. the dielectric absorption effect of the insulation

Last Answer : Answer: C