Enlarged head of a supporting column of a flat slab is technically known as
(A) Supporting end of the column
(B) Top of the column
(C) Capital
(D) Drop panel

1 Answer

Answer :

Answer: Option C

Related questions

Description : Thickened part of a flat slab over its supporting column, is technically known as (A) Drop panel (B) Capital (C) Column head (D) None of these

Last Answer : Answer: Option A

Description : Critical section for shear in case of flat slabs is at a distance of (A) Effective depth of slab from periphery of column/drop panel (B) d/2 from periphery of column/capital/ drop panel (C) At the drop panel of slab (D) At the periphery of column

Last Answer : Answer: Option B

Description : If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span ... (L + 2D/3)² (C) WL/10 (L - 2D/3)² (D) WL/12 (L - D/3)²

Last Answer : Answer: Option C

Description : The effective width of a column strip of a flat slab, is (A) One-fourth the width of the panel (B) Half the width of the panel (C) Radius of the column (D) Diameter of the column

Last Answer : Answer: Option B

Description : If the size of panel in a flat slab is 6 m × 6 m, then as per Indian Standard Code, the widths of column strip and middle strip are (A) 3.0 m and 1.5 m (B) 1.5 m and 3.0 m (C) 3.0 m and 3.0 m (D) 1.5 m and 1.5 m

Last Answer : Answer: Option C

Description : The diameter of the column head support a flat slab, is generally kept (A) 0.25 times the span length (B) 0.25 times the diameter of the column (C) 4.0 cm larger than the diameter of the column (D) 5.0 cm larger than the diameter of the column

Last Answer : Option A

Description : A reinforcing slab, build monolithically with the supporting columns and is reinforced in two or more directions, without any provision of beams is called a (a) Two way slab (b) Flat slab (c) Continus slab (d) Cireulashion

Last Answer : (b) Flat slab

Description : The minimum thickness of a flat slab is taken (A) L/32 for end panels without drops (B) L/36 for end panels without drops (C) L/36 for interior panels without drop (D) All the above

Last Answer : Answer: Option D

Description : The moments developed in the slab are influenced by the following factors i.Short span ii.Long span iii.Type of supporting edge. iv.Magnitude and type of load on slab [ A ] i, iii and iv [ B ] ii ,iii and iv [ C ] i and iii [ D ] i, ii , iii and iv

Last Answer : [ D ] i, ii , iii and iv

Description : Pick up the correct statement from the following: (A) A combined footing is so proportioned that centre of gravity of supporting area coincides with centre of gravity of two column loads (B) A ... in shape (C) Trapezoidal shaped footings may be provided under any loading (D) All the above

Last Answer : Answer: Option D

Description : The vertical posts placed at the top and bottom ends of a flight supporting the hand rail are known as (A) Balusters (B) Newel posts (C) Balustrades (D) Railings

Last Answer : Answer: Option B

Description : A flat slab is supported (A) On beams (B) On columns (C) On beams and columns (D) On columns monolithically built with slab

Last Answer : Answer: Option D

Description : Reinforced concrete slab supported only on columns is said to be [ A ] Rigid slab [ B ] Flat slab [ C ] Both(a) and (b) [ D ] None of the above.

Last Answer : [ B ] Flat slab

Description : Bottom bars under the columns are extended into the interior of the footing slab to a distance greater than (A) 42 diameters from the centre of the column (B) 42 diameters from the inner edge of ... ) 42 diameters from the outer edge of the column (D) 24 diameters from the centre of the column

Last Answer : Answer: Option C

Description : Minimum clear cover (in mm) to the main steel bars in slab, beam, column and footing respectively, are (a) 10, 15, 20 and 25 (b) 15, 25, 40 and 75 (c ) 20, 25, 30 and 40 (d) 20, 35, 40 and 75

Last Answer : (b) 15, 25, 40 and 75

Description : At the socket and spigot joint, (A) Enlarged end of the pipe is called socket (B) Normal end of the pipe is called spigot (C) Spigot is fitted into the socket (D) All the above

Last Answer : (D) All the above

Description : In case the factor of safety against sliding is less than 1.5, a portion of slab is constructed downwards at the end of the heel slab, which is known as (A) A key (B) A cut-off wall (C) A rib (D) All the above

Last Answer : Answer: Option D

Description : Which of the following is/are correct about the Rann of Kachchh ? 1. It is a flat saline marsh land 2. It is in Rajasthan 3. It is the home of the Indian Wild Ass 4. It is a unique land formation supporting several singular species of ... 1, 2 and 3 (b) 2, 3 and 4 (c) 1, 3 and 4 (d) 1, 2, 3 and 4

Last Answer : Ans: (c)

Description : Inside the distillation column, the (A) Driving force for the vapour flow is the pressure drop (B) Liquids are not always at their bubble points (C) Pressure increases gradually from bottom to the top of the column (D) None of these

Last Answer : (A) Driving force for the vapour flow is the pressure drop

Description : In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for ... bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Last Answer : (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

Description : Pick up the incorrect statement from the following: (A) In the stem of a retaining wall, reinforcement is provided near the earth side (B) In the toe slab of a retaining wall, reinforcement is ... slab of a retaining wall, reinforcement is provided at the top of the slab (D) None of these

Last Answer : Answer: Option D

Description : In cement concrete pavements, tensile stress is due to: (A) Bending or deflection under wheel loads (B) Difference in temperature of the top and bottom of pavement (C) Contraction of slab during falling temperature (D) All the above

Last Answer : Answer: Option D

Description : The reinforcement in a continuous slab is provided (a) At the top of the slab portion over the intermediate supports. (b) At the bottom of the slab portion over the intermediate supports. (c) All the middle of the slab portion over the intermediate supports (d) All the above

Last Answer : (a) At the top of the slab portion over the intermediate supports.

Description : What's the difference between wide screen and flat panel HDTVs?

Last Answer : I don’t think there’s a distinction between those two. They are independent. All LDC TVs are flat screen. Most are wide screen too. One has nothing to do with the other.

Description : Where can I get a flat panel TV on the Cheap?

Last Answer : answer:www.craigslist.com --though you want to do some research on exact models to make sure you're not getting ripped off. I work at Micro Center you can find pretty cheap TV's there too .42 in for ... -rate the difference on the warranty and they can keep it. If you need any more help let me know.

Description : What are 2 things you should use to clean a flat panel LCD screen?

Last Answer : A soft, slightly damp cloth is really all you need. Screensrarely get to the stage where you need to use cleaningproducts.

Description : Can I trust my flat panel TV to show 1080p if its date of manufacture is within the past two years?

Last Answer : If you want a 1080p tv you have to buy one which is capable of it. These have been made for several years, but just because a tv is new has no bearing on it's specifications.

Description : What is the typical cost for a flat panel tv that is between 32 and 52 inches?

Last Answer : Searches in the internet show that the cost of a 32 inches flat panel tv can be in the range of $350-750; however, there are good models 32" flat panel TVs of popular brands available at around $450; ... however, you should be able to get a good brand of typical 52" flat panel TV at around $1200.

Description : How much does it cost to repair a flat panel television?

Last Answer : The cost of repair for a flat panel television varies by company. The cost also depends on the problems that are found on the television and the parts required for repair. The cost to replair a flat ... on what parts you need replaced. It also depends on who is fixing it and their repair rates.

Description : Is a flat panel television better than a big screen?

Last Answer : A flat panel television and a big screen television are not necessarily mutually exclusive. You can have a flat panel big screen television, which is the best television of all.

Description : Will the Dynex Coaxial-to-RCA Connector Adapter work with my 32" RCA Flat Panel TV?

Last Answer : Yes, absolutely. Any television with RCA style inputs can be used with this adapter, including LCD's, Plasma, projections, and even CRT.

Description : Sony Bravia V-Series KDL-40V5100 40 in. 1080p LCD Flat Panel HDTV compatible with a Mac TV?

Last Answer : Assuming you mean an Apple Mac TV, Apple does not make televisions. Otherwise are you looking for Apple TV compatibility, or a Mac TV tuner?

Description : Where can I find flat panel TV reviews?

Last Answer : Reviews for flat panel television sets can be found in a number of places. One great place to check would be consumer websites such as Amazon or Best Buy. You can also try services like Consumer Reports.

Description : A Flat-Panel LCD is the Best Computer Monitor ?

Last Answer : When looking for the best computer monitor, choose a flat-panel LCD (liquid crystal display) computer monitor. It will offer better performance when running in its native resolution and will provide faster ... of desk space. This makes it a good choice when searching for the best computer monitor.

Description : Is it more useful to place a flat panel TV on a stand or hang it on the wall?

Last Answer : It is more useful to use a stand for a flat screen TV. If a flat screen is hung up you will have to go through the trouble of mounting it and possibly damaging the wall opposed to just sitting it on a table or stand.

Description : A ___________________ monitor looks like a television and are normally used with non-portable computer systems. a) CRT b) LCD c) LED d) Flat Panel Monitors

Last Answer : Answer: a Explanation: A CRT (or the Cathode Ray Tube) Monitor looks like a television ideally. The flat panel monitors are thinner and lighter in comparison

Description : Which of the following monitor types most closely resembles a television: a) flat panel b) cathode ray tube c) e - book reader d) data projector e) None of The Above

Last Answer : b) cathode ray tube

Description : Flat panel displays are designed to reduce what problem of a crt display?

Last Answer : Reduce the depth of the crt display caused by the length of the tube.

Description : For a continuous floor slab supported on beams, the ratio of end span length and intermediate span length, is (A) 0.6 (B) 0.7 (C) 0.8 (D) 0.9

Last Answer : Answer: Option D

Description : If the length of an intermediate span of a continuous slab is 5m, the length of the end span is kept (A) 4.5 m (B) 4.0 m (C) 3.5 m (D) 3.0 m

Last Answer : Answer: Option A

Description : The floor slab of a building is supported on reinforced cement floor beams. The ratio of the end and intermediate spans is kept (A) 0.7 (B) 0.8 (C) 0.9 (D) 0.6

Last Answer : Answer: Option C

Description : The floor slab of a building is supported on reinforced cement floor beams. The ratio of the end and intermediate span is kept. (a) 0.7 (b) 0.8 (c) 0.9 (d) 0.6

Last Answer : (c) 0.9

Description : When a slab is continuous over several spans, negative (i.e. hogging ) bending moment is induced over the (a) End supports (b) Intermediate supports (c) Both (a) & (b) (d) Non of the

Last Answer : (b) Intermediate supports

Description : Which of the following is not a characteristic feature of yield lines? [ A ] Yield lines end at a slab boundary [ B ] Yield lines are of parabolical shape [ C ] Axes of rotation generally lie along the lines of supports [ D ] None of the above.

Last Answer : [ B ] Yield lines are of parabolical shape

Description : State the requirement of good form work and state the stripping time of form work as per IS 456-2000. i) Slab ii) Beam iii) Column with labelling on sketch.

Last Answer : Requirement of good form work: 1. It should be strong enough to resist the weight of concrete, workers and machinery. 2. It should be economical compared to total cost of construction. 3. It should be possible ... arch of span more than 6m - 21 days iii) Column: Vertical formwork - 16 to 24 hours

Description : The additional piles which are driven to increase the capacity of supporting loads on vertical piles, are known (A) Construction piles (B) Raking piles (C) Eccentric piles (D) Sinking piles

Last Answer : Answer: Option B

Description : The arrangement of supporting an existing structure by providing supports underneath, is known as (A) Shoring (B) Underpinning (C) Jacking (D) Piling

Last Answer : Answer: Option B

Description : A magician, had a water glass that was filled to the top. Holding the glass above his head he let it drop to the carpet without spilling a single drop of water. How could he manage to drop the glass from a height of six feet and not spill any water? -Riddles

Last Answer : The glass was filled, but not with water.

Description : Lack of access to financial services is technically known as ______ A. Financial Instability B. Financial Stability C. Financial Inclusion D. Financial Exclusion E. Poverty

Last Answer : D. Financial Exclusion Explanation: Financial exclusion can be defined as the unavailability of banking services to people with low or non income. It is believed to be one factor preventing poor people leave out poverty.