What Is Car (causal Analysis And Resolution)?

What Is Car (causal Analysis And Resolution)?
by

1 Answer

Answer :

Casual Analysis and Resolution is the process of analyzing
 defects, problems and good practices/positive triggers in a project.
 Root cause of the same.
 Identity the respective corrective and preventive actions.
 Tracking these tasks to closure.
The identification of the root causes scientifically and carrying out their corrective and preventive actions is the advantage of CAR. At the initial stage, all phase and at the end stage of the project, the CAR is needed to be performed on a monthly basis. CAR can be done by using ‘fishbone’ diagram.
by

Related questions

What Is Dar (decision Analysis And Resolution)?

Description : What Is Dar (decision Analysis And Resolution)?

Last Answer : To analyze possible decisions by using a formal evaluation process which identifies the alternatives against established criteria is done by the DAR. For example a project is to use a third party ... using three to four tools. In this process certain alternatives are available in case of problems.

Which one of the following best describes users? a. Providers of both strategic and tactical direction to the project. b. Those intended to receive benefits or operate outputs. c. Facilitators of an appropriate issue resolution procedure. d. Those providing full-time commitment to the project.

Description : Which one of the following best describes users? a. Providers of both strategic and tactical direction to the project. b. Those intended to receive benefits or operate outputs. c. Facilitators of an appropriate issue resolution procedure. d. Those providing full-time commitment to the project.

Last Answer : b. Those intended to receive benefits or operate outputs.

Which conflict resolution technique do project managers use most often? A. Smoothing B. Norming C. Confronting D. Forcing

Description : Which conflict resolution technique do project managers use most often?  A. Smoothing B. Norming C. Confronting D. Forcing

Last Answer : C. Confronting

Which one of the following best describes users? a. Providers of both strategic and tactical direction to the project. b. Those intended to receive benefits or operate outputs. c. Facilitators of an appropriate issue resolution procedure. d. Those providing full-time commitment to the project.

Description : Which one of the following best describes users?  a. Providers of both strategic and tactical direction to the project.  b. Those intended to receive benefits or operate outputs.  c. ... of an appropriate issue resolution procedure.  d. Those providing full-time commitment to the project.

Last Answer : b. Those intended to receive benefits or operate outputs.

Following are the phases of Project Management Life Cycle. Arrange them in correct order 1. Design, 2. Marketing, 3. Analysis and evaluation, 4. Inspection, testing and delivery (A) 3-2-1-4 (B) 1-2-3-4 (C) 2-3-1-4 (D) 4-3-2-1

Description : Following are the phases of Project Management Life Cycle. Arrange them in correct order 1. Design, 2. Marketing, 3. Analysis and evaluation, 4. Inspection, testing and delivery (A) 3-2-1-4 (B) 1-2-3-4 (C) 2-3-1-4 (D) 4-3-2-1

Last Answer : (A) 3-2-1-4

Which one of the following statements best describes the use of an issue log? a. A summary of all possible alternative resolutions of an issue. b. A summary of all the project issues, their analysis and status. c. A tool to ensure that a process is in place for capturing all issues. d. A tool to ensure that the issue management process is adhered to.

Description : Which one of the following statements best describes the use of an issue log? a. A summary of all possible alternative resolutions of an issue. b. A summary of all the project issues, their ... for capturing all issues. d. A tool to ensure that the issue management process is adhered to.

Last Answer : b. A summary of all the project issues, their analysis and status.

During which stage of Risk planning are risks prioritized based on probability and impact? a. Identify Risks b. Plan Risk responses c. Perform Qualitative risk analysis d. Perform Quantitative risk analysis

Description : During which stage of Risk planning are risks prioritized based on probability and impact? a. Identify Risks b. Plan Risk responses c. Perform Qualitative risk analysis d. Perform Quantitative risk analysis

Last Answer : c. Perform Qualitative risk analysis

Root Cause Analysis relates to: A. Process Analysis B. Quality Audits C. Quality Control Measurements D. Performance Measurements

Description :  Root Cause Analysis relates to: A. Process Analysis B. Quality Audits C. Quality Control Measurements D. Performance Measurements

Last Answer : A. Process Analysis

Process Analysis is a function of: A. Performance AnalysisD. Quality Improvement Plan B. Quality Metrics C. Process Improvement Plan

Description : Process Analysis is a function of: A. Performance Analysis B. Quality Metrics C. Process Improvement Plan D. Quality Improvement Plan

Last Answer : C. Process Improvement Plan

Identify the sub-process of process improvement a) Process introduction b) Process analysis c) De-processification d) Process distribution

Description : Identify the sub-process of process improvement a) Process introduction b) Process analysis c) De-processification d) Process distribution

Last Answer : b) Process analysis

Which of the following activity is undertaken immediately after feasibility study and before the requirement analysis and specification phase? A. Project Planning B. Project Monitoring C. Project Control D. Project Scheduling

Description : Which of the following activity is undertaken immediately after feasibility study and before  the requirement analysis and specification phase? A. Project Planning B. Project Monitoring C. Project Control D. Project Scheduling

Last Answer : A. Project Planning

Identify the sub-process of process improvement a) Process introduction b) Process analysis c) De-processification d) Process distribution

Description : Identify the sub-process of process improvement a) Process introduction b) Process analysis c) De-processification d) Process distribution

Last Answer : b) Process analysis

A(n) _ is a review of the quality plan, procedures, data collection, and analysis by an outside group. Select one: a. scope document b. project appraisal c. cost performance index d. analogous estimate e. quality audit

Description : A(n) _ is a review of the quality plan, procedures, data collection, and analysis by  an outside group. Select one: a. scope document b. project appraisal c. cost performance index d. analogous estimate e. quality audit

Last Answer : e. quality audit

According to the PMBOK guide which of the following sta. Reserve analysis always plans contingency reserves for unexpected project scope and project costs, which are part of your project budget. b. Reserves should not be included in the project budget. c. If you only have limited resources, you may completely ignore reserve analysis when you try to determine your project budget. d. Planning contingency reserves for a project is not practical. e. Contingency reserves have never been a concern when planning a project budget.atements is right in terms of using reserve analysis to determine a project budget ?

Description : According to the PMBOK guide which of the following statements is right in terms  of using reserve analysis to determine a project budget ? a. Reserve analysis always plans contingency reserves ... not practical. e. Contingency reserves have never been a concern when planning a project budget.

Last Answer : . Reserve analysis always plans contingency reserves for unexpected project scope and  project costs, which are part of your project budget.

Petri is working for Nokia in Finland. He has completed 10 months of his 12-month project, budgeted at $800,000. His earned value analysis shows that variance at completion is $75,000. What is the estimate at completion value for this project? Select one: a. 725,000 b. -725,000 c. -$875,000 d. $875,000 e. $800,000

Description : Petri is working for Nokia in Finland. He has completed 10 months of his 12-month project, budgeted at $800,000. His earned value analysis shows that variance at  completion is $75,000. What is the estimate at completion value ... : a. 725,000 b. -725,000 c. -$875,000 d. $875,000 e. $800,000

Last Answer : d. $875,000

Fill in the blank. The _____ is the difference between the additional money spent on prevention and the corresponding reduction in the cost of failure. Select one: a. cost-benefit analysis b. implicit cost c. cost of quality d. variable cost e. cost-utility analysis

Description : Fill in the blank. The _____ is the difference between the additional money spent on  prevention and the corresponding reduction in the cost of failure. Select one: a. cost-benefit analysis b. implicit cost c. cost of quality d. variable cost e. cost-utility analysis

Last Answer : c. cost of quality

Which of the following is a quality management system that gives titles to specialists and requires a cost-benefit analysis? Select one: a. Lean accounting b. Business process re-engineering c. Kaizen d. Six Sigma e. Total Quality Management

Description : Which of the following is a quality management system that gives titles to specialists and requires a cost-benefit analysis? Select one: a. Lean accounting b. Business process re-engineering c. Kaizen d. Six Sigma e. Total Quality Management

Last Answer : d. Six Sigma

Complete the following statement. As the project progresses into the execution phase: Select one: a. risks need to be checked off on activities that have been performed. b. the total risk on the project typically increases. c. risks are identified with each major group of activities. d. a risk response plan can be used to identify increasing levels of detailed risk analysis. e. the risk breakdown structure needs to be examined to be sure all the risk events have been avoided.

Description : Complete the following statement. As the project progresses into the  execution phase: Select one: a. risks need to be checked off on activities that have been performed. b. the total risk on ... risk breakdown structure needs to be examined to be sure all the risk events have  been avoided.

Last Answer : a. risks need to be checked off on activities that have been performed.

According to the PMBOK guide, which of the following statements is right in terms of using reserve analysis to determine a project budget? Select one: A. Reserve analysis always plans contingency reserves for unexpected project scope and project costs, which are part of your project budget. B. Reserves should not be included in the project budget. C. If you only have limited resources, you may completely ignore reserve analysis when you try to determine your project budget. D. Planning contingency reserves for a project is not practical. E. Contingency reserves have never been a concern when planning a project budget.

Description : According to the PMBOK guide, which of the following statements is  right in terms of using reserve analysis to determine a project budget? Select one: A. Reserve analysis always plans ... not practical. E. Contingency reserves have never been a concern when planning a project budget.

Last Answer : A. Reserve analysis always plans contingency reserves for unexpected project scope and  project costs, which are part of your project budget.

Once the project is approved and moves into the planning stage, what happens in the next phase of the project life cycle?Select one: a. Agreements for risk sharing need to be concluded. b. The total risk on the project typically reduces as activities are performed without loss. c. Risks must be weighed against the potential benefit of the project’s success in order to decide if the project should be chosen. d. Risks are identified with each major group of activities. e. A risk response plan can be used to identify increasing levels of detailed risk analysis

Description : Once the project is approved and moves into the planning stage, what  happens in the next phase of the project life cycle? Select one: a. Agreements for risk sharing need to be concluded. ... activities. e. A risk response plan can be used to identify increasing levels of detailed risk analysis

Last Answer : d. Risks are identified with each major group of activities.

According to the Project Management Institute (PMI), project management is defined as “the application of knowledge, _____, _____, and techniques to project activities to meet the project requirements”. Select one: a. skills, analysis b. tools, analysis c. analysis, theories d. skills, tools e. skills, theories

Description : According to the Project Management Institute (PMI), project  management is defined as the application of knowledge, _____, _____, and  techniques to project activities to meet the project requirements . Select ... b. tools, analysis c. analysis, theories d. skills, tools e. skills, theories

Last Answer : d. skills, tools

The purpose of the analysis is to examine the desirability of investing in pre-investment studies. (True/False)

Description : The purpose of the analysis is to examine the desirability of investing in pre-investment  studies. (True/False)

Last Answer : Ans. True

Feasibility analysis is the first stage in the process of project development. (True/False)

Description : Feasibility analysis is the first stage in the process of project development. (True/False)

Last Answer : Ans. True

A simple way of looking at the spiral life-cycle model is as a waterfall model with each phase proceeded by a) Build-and-fix b) Freezingc) Synchronization d) Testing e) Risk analysis

Description : A simple way of looking at the spiral life-cycle model is as a waterfall model with each phase proceeded by a) Build-and-fix b) Freezing c) Synchronization d) Testing e) Risk analysis

Last Answer : e) Risk analysis

Identify the sub-process of process improvement (A)Process introduction (B) Process analysis (C) De-processification (D)Process distribution

Description : Identify the sub-process of process improvement (A)Process introduction (B) Process analysis (C) De-processification (D)Process distribution

Last Answer : (A)Process introduction

Following are the phases of Project Management Life Cycle. Arrange (B) 1-2-3-4 (C) 2-3-1-4 (D) 4-3-2-1them in correct order 1. Design, 2. Marketing, 3. Analysis and evaluation, 4. Inspection, testing and delivery (A) 3-2-1-4

Description : Following are the phases of Project Management Life Cycle.  Arrange them in correct order 1. Design, 2. Marketing, 3. Analysis and evaluation, 4. Inspection, testing and delivery  (A) 3-2-1-4 (B) 1-2-3-4 (C) 2-3-1-4 (D) 4-3-2-1

Last Answer : (D) 4-3-2-1

For the best model suitable for the project, in which of the phase the developers decide a roadmap for project plan? a. Design b. System Analysis c. Codingd. Testing

Description : For the best model suitable for the project, in which of the phase  the developers decide a roadmap for project plan? a. Design b. System Analysis c. Coding d. Testing

Last Answer : b. System Analysis

PERT (Project Evaluation and Review Technique) analysis is based on A. Optimistic time, Pessimistic time and Most likely time B.Pessimistic time, Optional time, Maximum time C.Optimistic time, Efficient time, Most likely time D.Minimax time, Optimistic time and harmonic time

Description : PERT (Project Evaluation and Review Technique) analysis is based on  A. Optimistic time, Pessimistic time and Most likely time  B.Pessimistic time, Optional time, Maximum time  C.Optimistic time, Efficient time, Most likely time  D.Minimax time, Optimistic time and harmonic time

Last Answer : A. Optimistic time, Pessimistic time and Most likely time

For an activity in a CPM analysis, the early Finish time is 13 and the late Finish time is 13. Duration of activity is 6. Which of the following statements is true? A.The early start is 6 B.The duration of the activity is 13 C.The slack of this activity is 13 D.The activity is on the critical path

Description : For an activity in a CPM analysis, the early Finish time is 13 and the late Finish time  is 13. Duration of activity is 6. Which of the following statements is true?  A.The early start is 6 B. ... of the activity is 13  C.The slack of this activity is 13  D.The activity is on the critical path

Last Answer : D.The activity is on the critical path

Project crashing is the method for ------------- A. Shortening the project duration by reducing the time of one or more critical activities B.Adding resources at critical points C.Doing technical analysis of the finished work for review D.Adding duration to each activity

Description : Project crashing is the method for -------------  A. Shortening the project duration by reducing the time of one or more critical  activities  B.Adding resources at critical points  C.Doing technical analysis of the finished work for review  D.Adding duration to each activity

Last Answer : A. Shortening the project duration by reducing the time of one or more critical  activities

Lower CASE tools are used to create integrated diagrams of the system and store information about system components during the analysis phase.

Description : Lower CASE tools are used to create integrated diagrams of the system and store  information about system components during the analysis phase.

Last Answer : Ans: False

Estimates from the planning stage will need to be refined as the project progresses, because it is virtually impossible to develop an exact assessment of the project’s schedule before the analysis and design phases are conducted.

Description : Estimates from the planning stage will need to be refined as the project progresses,  because it is virtually impossible to develop an exact assessment of the project’s schedule  before the analysis and design phases are conducted.

Last Answer : Ans: True

Using typical industry standards for estimating project time schedules, the estimated analysis phase would be 10 person-months for a systems project where the planning phase was completed in 7.5 person-months.

Description : Using typical industry standards for estimating project time schedules, the estimated  analysis phase would be 10 person-months for a systems project where the planning phase was completed in 7.5 person-months.

Last Answer : Ans: True

Using typical industry standards for estimating project time schedules, the estimated analysis phase would be 25 person-months for a systems project where the planning phase was completed in 30 person-months.

Description : Using typical industry standards for estimating project time schedules, the estimated  analysis phase would be 25 person-months for a systems project where the planning phase was completed in 30 person-months.

Last Answer : Ans: False

When estimating project time schedules using industry standards for a systems project, the following values are acceptable: 15% for planning, 25% for analysis, 50% for design, and 10% for implementation.

Description : When estimating project time schedules using industry standards for a systems project,  the following values are acceptable: 15% for planning, 25% for analysis, 50% for design,  and 10% for implementation.

Last Answer : Ans: False

The process of assigning values for the time and effort needed to perform a system project is called _____. a. analysis b. estimation c. identifying d. planning

Description : The process of assigning values for the time and effort needed to perform a system  project is called _____.  a. analysis  b. estimation  c. identifying  d. planning

Last Answer : b. estimation

Ryan, a newly hired systems analyst/consultant, is about to begin a systems project. Where will Ryan look first to locate the identifiable tasks he will record in his work plan? a. call a friend at a competing firmb. his Systems Analysis text book from college c. the company training materials for the company methodology d. the project planning software available at the local bookstore e. the website of his old college professor

Description : Ryan, a newly hired systems analyst/consultant, is about to begin a systems project.  Where will Ryan look first to locate the identifiable tasks he will record in his work plan?  a. ... . the project planning software available at the local bookstore  e. the website of his old college professor

Last Answer : c. the company training materials for the company methodology

Monte Carlo analysis can help predict the impact of risks on project deliverables. This is an element of one of the tools and techniques of which of the following processes? A. Risk Response Planning B. Quantitative Risk Analysis C. Risk Identification D. Qualitative Risk Analysis

Description : Monte Carlo analysis can help predict the impact of risks on project deliverables.  This is an element of one of the tools and techniques of which of the following processes? A. Risk Response Planning B. Quantitative Risk Analysis C. Risk Identification D. Qualitative Risk Analysis

Last Answer : B. Quantitative Risk Analysis

The process of assessing the probability and consequences of identified risks to the project objectives, assigning a risk score to each risk, and creating a list of prioritized risks describes which of the following processes? A. Quantitative Risk Analysis B. Risk Identification C. Qualitative Risk Analysis D. Risk Management Planning

Description : The process of assessing the probability and consequences of identified risks to the project objectives, assigning a risk score to each risk, and creating a list of prioritized risks describes ... Risk Analysis B. Risk Identification C. Qualitative Risk Analysis D. Risk Management Planning

Last Answer : C. Qualitative Risk Analysis

All of the following are true regarding the Qualitative Risk Analysis process except which one? A. Probability and impact and expert interview are used to help correct biases that occC. Qualitative Risk Analysis is an easy method of determining risk probability and impact that usually takes a good deal of time to perform. D. Risk urgency assessment is a tool and technique of this process used to determine which risks need near-term response plans.ur in the data you’ve gathered during this process. B. The probability and impact matrix is used during this process to assign red, yellow, and green conditions to risks.

Description : All of the following are true regarding the Qualitative Risk Analysis process except  which one?  A. Probability and impact and expert interview are used to help correct biases that occur  in the data ... of this process used to determine  which risks need near-term response plans.

Last Answer : C. Qualitative Risk Analysis is an easy method of determining risk probability and  impact that usually takes a good deal of time to perform.

Which of the following processes assesses the likelihood of risk occurrences and their consequences using a numerical rating? A. Qualitative Risk Analysis B. Risk Identification C. Quantitative Risk Analysis D. Risk Response Planning

Description : Which of the following processes assesses the likelihood of risk occurrences and their consequences using a numerical rating? A. Qualitative Risk Analysis B. Risk Identification C. Quantitative Risk Analysis D. Risk Response Planning

Last Answer : C. Quantitative Risk Analysis

Which of the following is true? A. Discounted cash flow analysis is the least precise of the cash flow techniques, because it does not consider the time value of money. B. NPV is the least precise of the cash flow analysis techniques, because it assumes reinvestment at the discount rate. C. Payback period is the least precise of the cash flow analysis techniques, because it does not consider the time value of money. D. IRR is the least precise of the cash flow analysis techniques, because it assumes reinvestment at the cost of capital.

Description : Which of the following is true?  A. Discounted cash flow analysis is the least precise of the cash flow techniques, because  it does not consider the time value of money. B. NPV is ... least precise of the cash flow analysis techniques, because it assumes  reinvestment at the cost of capital.

Last Answer : C. Payback period is the least precise of the cash flow analysis techniques, because it  does not consider the time value of money.

Which method is not included in seven Project Selection Methods? A. Financial Analysis B. Strategic Alignment C. Weighted Scoring Model D. Straight line Model (Ans.)

Description : Which method is not included in seven Project Selection Methods?  A. Financial Analysis B. Strategic Alignment C. Weighted Scoring Model D. Straight line Model (Ans.)

Last Answer : D. Straight line Model (Ans.)

During which stage of Risk planning are risks prioritized based on probability and impact? a. Identify Risks b. Plan Risk responses c. Perform Qualitative risk analysis d. Perform Quantitative risk analysis

Description : During which stage of Risk planning are risks prioritized based on probability and impact? a. Identify Risks b. Plan Risk responses c. Perform Qualitative risk analysis d. Perform Quantitative risk analysis

Last Answer : c. Perform Qualitative risk analysis

Root Cause Analysis relates to: A. Process Analysis B. Quality Audits C. Quality Control Measurements D. Performance Measurements

Description : Root Cause Analysis relates to: A. Process Analysis B. Quality Audits C. Quality Control Measurements D. Performance Measurements

Last Answer : A. Process Analysis

Process Analysis is a function of: A. Performance Analysis B. Quality Metrics C. Process Improvement Plan D. Quality Improvement Plan

Description : Process Analysis is a function of: A. Performance Analysis B. Quality Metrics C. Process Improvement Plan D. Quality Improvement Plan

Last Answer : C. Process Improvement Plan

Which one of the following statements best describes the use of an issue log? a. A summary of all possible alternative resolutions of an issue. b. A summary of all the project issues, their analysis and status. c. A tool to ensure that a process is in place for capturing all issues. d. A tool to ensure that the issue management process is adhered to.

Description : Which one of the following statements best describes the use of an issue log?  a. A summary of all possible alternative resolutions of an issue.  b. A summary of all the project issues, their ... for capturing all issues.  d. A tool to ensure that the issue management process is adhered to.

Last Answer : b. A summary of all the project issues, their analysis and status.

When developing a project's scope statement, which of the following should not be included? 1. Project justification. 2. Cost/benefit analysis 3. Project deliverables 4. Measurable objectives

Description : When developing a project's scope statement, which of the following should not be  included? 1. Project justification.  2. Cost/benefit analysis  3. Project deliverables  4. Measurable objectives

Last Answer : 1. Project justification.

What is the most accurate method of obtaining project information that can reduce the amount of risk? 1. Observations on the current project 2. Determining the risk by using brainstorming techniques 3. The use of historical data from previous projects that were similar in nature 4. Sensitivity analysis 5. Delphi technique.

Description : What is the most accurate method of obtaining project information that can reduce the amount  of risk? 1. Observations on the current project  2. Determining the risk by using brainstorming ... from previous projects that were similar in nature  4. Sensitivity analysis  5. Delphi technique.

Last Answer : 3. The use of historical data from previous projects that were similar in nature