List typical inputs and outputs for PLC (four input and any four output).

List typical inputs and outputs for PLC (four input and any four output).
by

1 Answer

Answer :

Typical PLC inputs 

Push Button 

Selector Switch 

Proximity switch 

FOOT switch, level switch 

Analog input 

Typical PLC outputs 

Contactor Coil, solenoid, relay 

Indicating Lamp 

Buzzer 

Alaram annunciator

by

Related questions

List any four input and four output devices used with PLC.

Description : List any four input and four output devices used with PLC.

Last Answer : Input device: 1. Push button. 2. Temperature switches. 3. Limit switches. 4. Pressure switches. 5. Level Switches. 6. Proximity Switches. Output devices: 1. Motor. 2. Display. 3. Heater coil. 4. Relay. 5. Lamp. 6. Buzzer.

List any our input and output of PLC.

Description : List any our input and output of PLC.

Last Answer : Typical PLC inputs  1) Push Button  2) Selector Switch  3) Proximity switch  4) FOOT switch, level switch  5) Analog input  Typical PLC outputs  1) Contactor Coil, solenoid, relay  2) Indicating Lamp  3) Buzzer  4) Alaram annunciator

Draw typical wiring details & four specifications of AC output module of PLC.

Description : Draw typical wiring details & four specifications of AC output module of PLC.

Last Answer : The below figure show the basic field wiring for digital 120V AC output module. The Wiring diagrams show how wires of output devices are connected to screw terminals of PLC modules. As per the wiring ... excessive current from damaging the wiring to the field devices.  Specifications:-

One feature of the operational amplifier is that it can have ____________. A. up to ten outputs B. binary coded decimal inputs C. several hundred amps at the output D. inverting and non-inverting inputs

Description : One feature of the operational amplifier is that it can have ____________. A. up to ten outputs B. binary coded decimal inputs C. several hundred amps at the output D. inverting and non-inverting inputs

Last Answer : Answer: D

A perceptron adds up all the weighted inputs it receives, and if it exceeds a certain value, it outputs a 1, otherwise it just outputs a 0. a) True b) False c) Sometimes – it can also output intermediate values as well d) Can’t say

Description : A perceptron adds up all the weighted inputs it receives, and if it exceeds a certain value, it outputs a 1, otherwise it just outputs a 0. a) True b) False c) Sometimes – it can also output intermediate values as well d) Can’t say

Last Answer : a) True

. In an Unsupervised learning ____________ a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given

Description : . In an Unsupervised learning ____________ a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given

Last Answer : b) Specific output values are not given

In an Unsupervised learning a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given e) Neither inputs nor outputs are given

Description : In an Unsupervised learning a) Specific output values are given b) Specific output values are not given c) No specific Inputs are given d) Both inputs and outputs are given e) Neither inputs nor outputs are given

Last Answer : b) Specific output values are not given

A full adder logic circuit will have (A) Two inputs and one output. (B) Three inputs and three outputs. (C) Two inputs and two outputs. (D) Three inputs and two outputs.

Description : A full adder logic circuit will have (A) Two inputs and one output. (B) Three inputs and three outputs. (C) Two inputs and two outputs. (D) Three inputs and two outputs.

Last Answer : Ans: D A full adder circuit will add two bits and it will also accounts the carry input generated in the previous stage. Thus three inputs and two outputs (Sum and Carry) are there.

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Description : 8096 has ___ general purpose I/O ports, Port 2 includes ______ of the following i) two quasi-bidirectional I/O lines ii) two output lines iii) four input lines iv) open drain outputs a) 4, i, iv b) 6, ii, iii c) 4, i,ii,iii d) 6, i, ii, iv

Last Answer : c) 4, i,ii,iii

Drawthe PLC ladder diagram of ON-OFF control of lamp. Write the input and output devises.

Description : Drawthe PLC ladder diagram of ON-OFF control of lamp. Write the input and output devises.

Last Answer : Diagram:

State any two input and output devices of PLC

Description : State any two input and output devices of PLC

Last Answer : Input Devices of PLC: i) Selector switches ii) Push buttons iii) Binary encoders iv) Mechanical/magnetic Limit switches v) Inductive/ capacitive/optical proximity switches vi) Analog transducers ... /Lamps v) Solenoids vi) Continuous/ discrete valves vii)Analog/digital indicators/recorders etc.

If the differential amplifier is configured with a single input and differential outputs, what will the output signals be?

Description : If the differential amplifier is configured with a single input and differential outputs, what will the output signals be?

Last Answer : Each output will be a sine wave with a peak-to-peak amplitude of 100 millivolts. The output signals will be 180 degrees out of phase with each other.

State True or False. i) In spooling high speed device like a disk is interposed between running program and low-speed device in Input/output. ii) By using spooling for example instead of writing directly to a printer, outputs are written to the disk. A) i-True, ii-False B) i-True, ii-True C) i-False, ii-True D) i-False, ii-False

Description : State True or False. i) In spooling high speed device like a disk is interposed between running program and low-speed device in Input/output. ii) By using spooling for example instead of writing directly to a printer, ... ii-False B) i-True, ii-True C) i-False, ii-True D) i-False, ii-False

Last Answer : B) i-True, ii-True

How many inputs and how many outputs of NOT gate ?

Description : How many inputs and how many outputs of NOT gate ?

Last Answer : NOT Gate has one input and one output.

What are the inputs and outputs of a toaster?

Description : What are the inputs and outputs of a toaster?

Last Answer : Need answer

What is a mapping between a set of inputs and a set of outputs?

Description : What is a mapping between a set of inputs and a set of outputs?

Last Answer : It is simply a mapping. It could be a function but there areseveral conditions that need to be met before the mapping canbecome a function and there is no basis for assuming that thoseconditions are met.

Transformation of physical inputs into physical outputs is termed as

Description : Transformation of physical inputs into physical outputs is termed as

Last Answer : Ans. Production

Gross National Product means - (1) gross value of finished goods (2) money values of the total national production for any given period (3) gross value of raw materials and semifinished products (4) money value of inputs and outputs

Description : Gross National Product means - (1) gross value of finished goods (2) money values of the total national production for any given period (3) gross value of raw materials and semifinished products (4) money value of inputs and outputs

Last Answer : (2) money values of the total national production for any given period Explanation: Gross national product (GNP) is the market/monetary value of all products and services produced in one year by labour and property supplied by the residents of a country.

Production Function relates to: (1) costs to outputs (2) costs to inputs (3) inputs to outputs (4) wage level to profits

Description : Production Function relates to: (1) costs to outputs (2) costs to inputs (3) inputs to outputs (4) wage level to profits

Last Answer : (3) inputs to outputs Explanation: In microeconomics and macroeconomics, a production function is a function that specifies the out-put of a firm, an industry, or an entire economy for all ... in the use of factor inputs in production and the resulting distribution of income to those factors.

Which one of the following statements best defines procd. The process by which products and services required for the project are acquired.urement? a. A technique to establish the best approach for obtaining the resources for the project. b. A group of interrelated resources and activities that transform inputs into outputs. c. The description of the purpose, form and components to support delivery of a product.

Description : Which one of the following statements best defines procurement? a. A technique to establish the best approach for obtaining the resources for the project. b. A group of interrelated resources and ... product. d. The process by which products and services required for the project are acquired.

Last Answer : d. The process by which products and services required for the project are acquired.

____ and ____ refer to the mechanism applied to the inputs to create the desired outputs.

Description : ____ and ____ refer to the mechanism applied to the inputs to create the desired outputs.

Last Answer : Ans. Tools and techniques

A function point is a measure of program size based on the number and complexity of inputs, outputs, queries, files and program interfaces.

Description :  A function point is a measure of program size based on the number and complexity of  inputs, outputs, queries, files and program interfaces.

Last Answer : Ans: True

A(n) ____________ is a measure of program size based on the number and complexity of inputs, outputs, queries, files, and program interfaces. a. function point b. line of code c. project plan d. standard module e. workplan

Description : A(n) ____________ is a measure of program size based on the number and  complexity of inputs, outputs, queries, files, and program interfaces.  a. function point  b. line of code  c. project plan  d. standard module  e. workplan

Last Answer : a. function point

Which one of the following statements best defines procurement? a. A technique to establish the best approach for obtaining the resources for the project. b. A group of interrelated resources and activities that transform inputs into outputs. c. The description of the purpose, form and components to support delivery of a product. d. The process by which products and services required for the project are acquired.

Description : Which one of the following statements best defines procurement?  a. A technique to establish the best approach for obtaining the resources for the project.  b. A group of interrelated resources and ... product.  d. The process by which products and services required for the project are acquired.

Last Answer : d. The process by which products and services required for the project are acquired.

What is the name of the function in the following statement “A perceptron adds up all the weighted inputs it receives, and if it exceeds a certain value, it outputs a 1, otherwise it just outputs a 0”? a) Step function b) Heaviside function c) Logistic function d) Perceptron function

Description : What is the name of the function in the following statement “A perceptron adds up all the weighted inputs it receives, and if it exceeds a certain value, it outputs a 1, otherwise it just outputs a 0”? a) Step function b) Heaviside function c) Logistic function d) Perceptron function

Last Answer : b) Heaviside function

Which were built in such a way that humans had to supply the inputs and interpret the outputs? a) Agents b) AI system c) Sensor d) Actuators

Description : Which were built in such a way that humans had to supply the inputs and interpret the outputs? a) Agents b) AI system c) Sensor d) Actuators

Last Answer : b) AI system

Value added is: a) the cost saving through production and marketing efforts within the firm. b) the value that a firm adds through the development of dynamic capabilities. c) the value that a firm adds to bought-in materials and services through outsourcing. d) the difference between the cost of inputs and the market value of outputs

Description : Value added is: a) the cost saving through production and marketing efforts within the firm. b) the value that a firm adds through the development of dynamic capabilities. c) the value that a ... through outsourcing. d) the difference between the cost of inputs and the market value of outputs

Last Answer : the difference between the cost of inputs and the market value of outputs

Various Organizational routines & processes that determines how efficiently and effectively the Organization transforms it’s inputs into outputs is called: A. Strength B. Core Competencies C. Capabilities D. Customer Value

Description : Various Organizational routines & processes that determines how efficiently and effectively the Organization transforms it’s inputs into outputs is called: A. Strength B. Core Competencies C. Capabilities D. Customer Value

Last Answer : Core Competencies

What is a firm? a. A president, some vice presidents, and some employees b. Any organization that wants to make a profit. c. Any accumulation of productive assets. d. Any organization that turns inputs into outputs

Description : What is a firm? a. A president, some vice presidents, and some employees b. Any organization that wants to make a profit. c. Any accumulation of productive assets. d. Any organization that turns inputs into outputs

Last Answer : d. Any organization that turns inputs into outputs

How many inputs and outputs are possible with a differential amplifier?

Description : How many inputs and outputs are possible with a differential amplifier?

Last Answer : Two inputs, two outputs.

Plant P Plant Producti roductivity is: vity is: a)Productivity = Inputs/Outputs b)Productivity = lnputs*Outputs c)Productivity = Outputs//lnputs d) None of the above

Description : Plant P Plant Producti roductivity is: vity is: a)Productivity = Inputs/Outputs b)Productivity = lnputs*Outputs c)Productivity = Outputs//lnputs d) None of the above

Last Answer : c)Productivity = Outputs//lnputs

A measure A measure of the success of an success of an operation in converting operation in converting inputs to inputs to outputs is outputs is a. Efficiency b. Effectiveness Effectiveness c. Quality d. Profitability

Description : A measure A measure of the success of an success of an operation in converting operation in converting inputs to inputs to outputs is outputs is a. Efficiency b. Effectiveness Effectiveness c. Quality d. Profitability

Last Answer : a. Efficiency

…………………. is a group of interested components working together towards a common goal by accepting inputs and producing outputs in an organized transformation process. A) System B) Network C) Team D) System Unit

Description : …………………. is a group of interested components working together towards a common goal by accepting inputs and producing outputs in an organized transformation process. A) System B) Network C) Team D) System Unit

Last Answer : A) System

Consider a project with the following functional units : Number of user inputs = 50 Number of user outputs = 40 Number of user enquiries = 35 Number of user files = 06 Number of external interfaces = 04 Assuming all complexity adjustment factors and weighing factors as average, the function points for the project will be (A) 135 (B) 722 (C) 675 (D) 672

Description : Consider a project with the following functional units : Number of user inputs = 50 Number of user outputs = 40 Number of user enquiries = 35 Number of user files = 06 Number of external interfaces = 04 ... average, the function points for the project will be (A) 135 (B) 722 (C) 675 (D) 672

Last Answer : (D) 672

Gross National Product means (1) gross value of finished goods (2) money values of the total national production for any given period (3) gross value of raw materials and semi-finished products (4) money value of inputs and outputs

Description : Gross National Product means (1) gross value of finished goods (2) money values of the total national production for any given period (3) gross value of raw materials and semi-finished products (4) money value of inputs and outputs

Last Answer : money values of the total national production for any given period

(i) List and explain the types of ROM. (ii) List any four advantages of PLC.

Description : (i) List and explain the types of ROM.  (ii) List any four advantages of PLC.

Last Answer : ROM types  1) PROM  2) EPROM  3) EEPROM  1) PROM: - (Programmable Read Only Memory): In this memory it may be programed once and once only, by the user/programmer. The user than programs ... signals.  10) PLC can provide security for ladder programming.  11) Speed of PLC is in milliseconds.

Production function relates - (1) Cost to output (2) Cost to input (3) Wages to profit (4) Inputs to output

Description : Production function relates - (1) Cost to output (2) Cost to input (3) Wages to profit (4) Inputs to output

Last Answer : (4) Inputs to output Explanation: Production function specifies the output of a firm, an industry, or an entire economy for all combinations of inputs. The relationship of output to inputs is ... relates physical inputs to physical outputs, and prices and costs are not reflected in the function.

One method of troubleshooting digital circuits in a console is to ___________. A. supply alternate logic levels at the input(s) and test for change of state conditions at the output B. ground all inputs and test for a logic '1' at the output C. open all inputs and test for a logic '0' at the output D. vary each input smoothly from 0-10 volts and test for similar variance at the output

Description : One method of troubleshooting digital circuits in a console is to ___________. A. supply alternate logic levels at the input(s) and test for change of state conditions at the output B. ground all ... output D. vary each input smoothly from 0-10 volts and test for similar variance at the output

Last Answer : Answer: A

A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Description : A two-input X-OR gate will produce a HIGH output when the inputs are at what logic levels?

Last Answer : . One or the other of the inputs must be HIGH, but not both at the same time.

What is the output Boolean expression for an AND gate with A and B as inputs when the B input is inverted?

Description : What is the output Boolean expression for an AND gate with A and B as inputs when the B input is inverted?

Last Answer : AB

A 4-input neuron has weights 1, 2, 3 and 4. The transfer function is linear with the constant of proportionality being equal to 2. The inputs are 4, 10, 5 and 20 respectively. The output will be: a) 238 b) 76 c) 119 d) 123

Description : A 4-input neuron has weights 1, 2, 3 and 4. The transfer function is linear with the constant of proportionality being equal to 2. The inputs are 4, 10, 5 and 20 respectively. The output will be: a) 238 b) 76 c) 119 d) 123

Last Answer : a) 238

The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Description : The output of two inputs OR gate is zero only when: (a) Both are one (b) Both are zero (c) Either input is 1 (d) None

Last Answer : (b) Both are zero

The output of a JK flipflop with asynchronous preset and clear inputs is ‘1’. The output can be changed to ‘0’ with one of the following conditions. (A) By applying J = 0, K = 0 and using a clock. (B) By applying J = 1, K = 0 and using the clock. (C) By applying J = 1, K = 1 and using the clock. (D) By applying a synchronous preset input.

Description : The output of a JK flipflop with asynchronous preset and clear inputs is 1'. The output can be changed to 0' with one of the following conditions. (A) By applying J = 0, K = 0 and using a clock. (B) ... (C) By applying J = 1, K = 1 and using the clock. (D) By applying a synchronous preset input.

Last Answer : Ans: C Preset state of JK Flip-Flop =1 With J=1 K=1 and the clock next state will be complement of the present state.

In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Description : In a certain electronic circuit the output is positive if input 1 is positive and input 2 is zero. If both inputs are positive the output is zero. This is: w) an AND circuit x) a NOR circuit y) an OR circuit z) a high-pass filter

Last Answer : ANSWER: Y -- AN OR CIRCUIT

An artificial neurons receives n inputs x1, x2,...,xn with weights w1,w2,...,wn attached to the input links. The weighted sum ............... is computed to be passed on to a non-linear filter ϕ called activation function to release the output. (A) Σ wi (B) Σ xi (C) Σ wi + Σ xi (D) Σ wi . Σ xi

Description : An artificial neurons receives n inputs x1, x2,...,xn with weights w1,w2,...,wn attached to the input links. The weighted sum ............... is computed to be passed on to a non-linear filter ϕ called activation function to release the output. (A) Σ wi (B) Σ xi (C) Σ wi + Σ xi (D) Σ wi . Σ xi

Last Answer : (D) Σ wi . Σ xi

Production function relates (1) Cost to output (2) Cost to input (3) Wages to profit (4) Inputs to output

Description : Production function relates (1) Cost to output (2) Cost to input (3) Wages to profit (4) Inputs to output

Last Answer : Inputs to output

The output of a 2-input NAND gate with high at both the inputs will be

Description : The output of a 2-input NAND gate with high at both the inputs will be • High • Low • High & low • None of the above.

Last Answer : The output of a 2-input NAND gate with high at both the inputs will be Low

Draw and explain analog input module of PLC.

Description : Draw and explain analog input module of PLC.

Last Answer : Analog input module are used for supplying analog input signal to PLC. Analog signals are generated by transducers, potentiometers. PLCs analog input module consists of analog-to-digital converter (ADC). ... of PLC. PLC reads the binary number and takes further decision based on the required logic 

How a PLC can be used to handle an analog input? Justify.

Description : How a PLC can be used to handle an analog input? Justify.

Last Answer : Diagram:-- Explanation: For analog operation, the level of a PLC input signal is sensed by an analog input module, like in a data acquisition system when input parameters may ... first converted into machine code and then the necessary control signals are generated to the output module.