Thermoplastic resins usually(A) Remain hard as long as they are hot(B) Cannot be reclaimed from waste(C) Permanent setting resins(D) Less brittle than thermosetting resins

Thermoplastic resins usually
(A) Remain hard as long as they are hot
(B) Cannot be reclaimed from waste
(C) Permanent setting resins
(D) Less brittle than thermosetting resins
by

1 Answer

Answer :

(D) Less brittle than thermosetting resins
by

Related questions

Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Description : Thermosetting resins/polymers as compared to thermoplastic ones are (A) Soluble in all organic solvents (B) More brittle (C) Formed by addition polymerisation only (D) Easily reshaped & reused

Last Answer : (B) More brittle

Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Description : Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Last Answer : Option D

Thermosetting resins are those polymers, which (A) Do not increase in plasticity with rise in temperature (B) Allow slip to occur between molecules (C) Do not take on a permanent set (D) None of theseThermosetting resins are those polymers, which(A) Do not increase in plasticity with rise in temperature(B) Allow slip to occur between molecules(C) Do not take on a permanent set(D) None of these

Description : Thermosetting resins are those polymers, which (A) Do not increase in plasticity with rise in temperature (B) Allow slip to occur between molecules (C) Do not take on a permanent set (D) None of these

Last Answer : (A) Do not increase in plasticity with rise in temperature

Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Description : Thermoplastic resins are those polymers, which (A) Has decreased plasticity at increasing temperature (B) Cannot be moulded (C) Easily deform under pressure at high temperature (D) None of these

Last Answer : (C) Easily deform under pressure at high temperature

All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Description : All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Last Answer : (C) Buckets

Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Description : Cross linked polymers are (A) Thermoplastic (B) Thermosetting (C) Either (A) or (B) (D) Fibres only

Last Answer : (B) Thermosetting

Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Description : Polymethyl methacrylate (PMMA) which is also known as Perspex and is produced by bulk polymerisation of methyl methacrylate is not a __________ polymer. (A) Thermoplastic (B) Thermosetting (C) Linear (D) Glass like transparent

Last Answer : (B) Thermosetting

Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Description : Polymers are classified into four categories namely thermosetting, thermoplastic, elastomer and fibre depending upon their (A) Molecular sizes (B) Magnitude of intermolecular forces (C) Resistance to heat (D) Polymerisation mechanism

Last Answer : (B) Magnitude of intermolecular forces

Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Description : Poly Vinyl chloride (PVC) is a __________ material. (A) Thermoplastic (B) Thermosetting (C) Fibrous (D) Chemically active

Last Answer : (A) Thermoplastic

Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Description : Linear polymers are normally (A) Thermosetting (B) Thermoplastic (C) Elastometric (D) Having extremely high softening poin

Last Answer : (B) Thermoplastic

Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Description : Thermosetting polymers as compared to thermoplastic polymers (A) Are formed by addition polymerisation (B) Have three dimensional structure (C) Have linear structure (D) None of these

Last Answer : (B) Have three dimensional structure

Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or thermosetting (C) Branching in case of cross-linked polymers caused by small amount of impurities in bifunctional monomer formulation reduces its solubility and increases the softening point (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Description : Pick out the wrong statement. (A) Linear polymers are formed from bifunctional groups only and are normally thermoplastic (B) Cross-linked branched chain polymers are either elastometric or ... (D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Last Answer : D) Dibasic acids reacts with dihydric alcohols to give polyesters using addition polymerisation reaction

Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Description : Cross linked polymers formed from bi-and trifunctional groups in which cross-linkage in three dimensions via few chemical bonding across linear chains occur imparts to the polymer __________ properties. (A) Thermoplastic (B) Thermosetting (C) Elastometric (D) Brittleness

Last Answer : (C) Elastometric

Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Description : Poly Vinyl Chloride (P.V.C.) is a __________ material. (A) Thermosetting (B) Thermoplastic (C) Fibrous (D) Chemically active

Last Answer : (B) Thermoplastic

While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Description : While the thermosetting polymers are amorphous in nature, the thermoplastic polymers are either amorphous or crystalline. The crystalline polymers are characterised by the (A) Low impact strength (B) High flexibility (C) Better finish and surface appearance (D) High plastic deformation

Last Answer : A) Low impact strength

Differentiate between Thermoplastic and Thermosetting polymers.

Description : Differentiate between Thermoplastic and Thermosetting polymers.

Last Answer : Differentiate between Thermosetting and Thermoplastic polymers: Thermosetting Thermoplastic Polymers which once mould /shaped do not soften when heated and thus cannot be reshaped  Polymers whose ... tri, tetra or poly functional. Monomer used in this polymer bi functional.

Compare between thermoplastic and thermosetting plastic.

Description : Compare between thermoplastic and thermosetting plastic.

Last Answer : Thermoplastics Thermosetting They can be repeated softened by heat and hardened on cooling Once hardened and set they do not softened with application of heat They are formed by ... to soft under heat  They can be used at comparatively higher temperature without damage. 

Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating process (C) The plastic articles made by placing raw material in the desired moulds, is known as moulding process (D) All the above

Description : Pick up the correct statement from the following: (A) The plastic bottles are made by the process of blowing (B) The application of thermo-setting resins on sheets of paper, is called laminating ... placing raw material in the desired moulds, is known as moulding process (D) All the above

Last Answer : Answer: Option D

What happens to etched composite resins after setting: A. Expand B. Contract C. Contract and expand

Description : What happens to etched composite resins after setting: A. Expand B. Contract C. Contract and expand

Last Answer : B. Contract

Which one among the following is not removed as a waste product from the body of a plant? (a) Resins and Gums (b) Urea (c) Dry Leaves (d) Excess Water

Description : Which one among the following is not removed as a waste product from the body of a plant? (a) Resins and Gums (b) Urea (c) Dry Leaves (d) Excess Water

Last Answer : Answer: (b)

Distinguish between thermoplastic and thermo setting polymers.

Description : Distinguish between thermoplastic and thermo setting polymers.

Last Answer : Thermo plastic polymer Thermo setting plastic  1. The inter moliculer forces are intermediate.  1. The inter molecular force are ... 3. Eg. Polythene and polystyrene  3. Eg. Bakelite

A material capable of undergoing large permanent deformation, when subjected to compression is termed as (A) Malleable (B) Ductile (C) Brittle (D) None of these

Description : A material capable of undergoing large permanent deformation, when subjected to compression is termed as (A) Malleable (B) Ductile (C) Brittle (D) None of these

Last Answer : (A) Malleable

. A material capable of undergoing large permanent deformation, when subjected to tension is termed as (A) Friable (B) Ductile (C) Brittle (D) None of these

Description : . A material capable of undergoing large permanent deformation, when subjected to tension is termed as (A) Friable (B) Ductile (C) Brittle (D) None of these

Last Answer : (B) Ductile

Silicone resins, which are highly water repellent and has good heat resistance cannot be used (A) As room temperature adhesive (B) As grease & lubricant

Description : Silicone resins, which are highly water repellent and has good heat resistance cannot be used (A) As room temperature adhesive (B) As grease & lubricant

Last Answer : (A) As room temperature adhesive

__________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Description : __________ moulding process cannot be used for thermoplastic plastics. (A) Compression (B) Extrusion (C) Injection (D) None of these

Last Answer : (C) Injection

Non sulphonated hard bakelites are not used for making (A) Ion-exchange resins (B) Fountain pen barrels (C) Formica table tops (D) Combs

Description : Non sulphonated hard bakelites are not used for making (A) Ion-exchange resins (B) Fountain pen barrels (C) Formica table tops (D) Combs

Last Answer : (A) Ion-exchange resins

Size reduction of __________ is accomplished in steam heated rollers and roll crushers. (A) Resins (B) Gums (C) Hard rubber (D) Waxes

Description : Size reduction of __________ is accomplished in steam heated rollers and roll crushers. (A) Resins (B) Gums (C) Hard rubber (D) Waxes

Last Answer : (C) Hard rubber

Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming

Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Description : Thermosetting plastic materials (A) Can be repeatedly melted (B) Is useful for melt casting (C) Cannot be melted after forming (D) Is useful for spinning

Last Answer : (C) Cannot be melted after forming

Rank the following impressions materials according to their flexibility A. Alginate> Polysulphide> Silicone> Zinc Oxide Eugenol B. Silicone> Alginate> Polysulphide> Zinc Oxide Eugenol C. Alginate> Polysulphide> Zinc Oxide Eugenol>Silicone D. Alginate> Silicone> Polysulfide> Zinc Oxide Eugenol E. Alginate> Zinc Oxide Eugenol> Silicone> Polysulphide 300.Denture resins are usually available as powder and liquid that

Description : Rank the following impressions materials according to their flexibility A. Alginate> Polysulphide> Silicone> Zinc Oxide Eugenol B. Silicone> Alginate> Polysulphide> Zinc Oxide Eugenol C. ... Eugenol> Silicone> Polysulphide 300.Denture resins are usually available as powder and liquid that

Last Answer : D. Alginate> Silicone> Polysulfide> Zinc Oxide Eugenol

Following are the statements regarding the Usar soil - 1. It is reclaimed by adding lime. 2. This soil has pH more than seven. 3. Paddy crop can be grown in this soil. Select the correct answer from the codes given below - a) 1 and 2 are correct b) 2 and 3 are correct c) Only 3 is correct d) Only 1 is correct

Description : Following are the statements regarding the Usar soil - 1. It is reclaimed by adding lime. 2. This soil has pH more than seven. 3. Paddy crop can be grown in this soil. Select the correct answer from the codes ... and 2 are correct b) 2 and 3 are correct c) Only 3 is correct d) Only 1 is correct

Last Answer : b) 2 and 3 are correct

In your life, what have you claimed or reclaimed?

Description : In your life, what have you claimed or reclaimed?

Last Answer : Yes, I am slowly, very, trying to become.

Are DFEC Treasury 310 Misc Pay funds reclaimed by Treasury.?

Description : Are DFEC Treasury 310 Misc Pay funds reclaimed by Treasury.?

Last Answer : Need answer

Uptill now how much of the water logged and saline land has been reclaimed? A. 12 Million acres B. 14 Million acres C. 16 Million acres D. 18 Million acres

Description : Uptill now how much of the water logged and saline land has been reclaimed? A. 12 Million acres B. 14 Million acres C. 16 Million acres D. 18 Million acres

Last Answer : ANSWER: D

'Green Accounting' means measuring the National Income of the country taking into account estimation of – (1) the total forest area of the country (2) the destruction of forest cover of the country (3) pollution and environmental damage (4) area of reclaimed fallow land

Description : 'Green Accounting' means measuring the National Income of the country taking into account estimation of – (1) the total forest area of the country (2) the destruction of forest cover of the country (3) pollution and environmental damage (4) area of reclaimed fallow land

Last Answer : (3) pollution and environmental damage Explanation: Green accounting is a type of accounting that attempts to factor environmental costs into the financial results of operations. It ... ignores the environment and therefore decisionmakers need a revised model that incorporates green accounting.

‘Green Accounting’ means measuring the National Income of the country taking into account estimation of (1) the total forest area of the country (2) the destruction of forest cover of the country (3) pollution and environmental damage (4) area of reclaimed fallow land

Description : ‘Green Accounting’ means measuring the National Income of the country taking into account estimation of (1) the total forest area of the country (2) the destruction of forest cover of the country (3) pollution and environmental damage (4) area of reclaimed fallow land 

Last Answer : pollution and environmental damage 

White cast iron is not (A) Malleable(B) Whitish in color(C) Brittle(D) Strong and hard

Description : White cast iron is not (A) Malleable (B) Whitish in color (C) Brittle (D) Strong and hard

Last Answer : (A) Malleable

Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Description : Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Last Answer : (D) Soft

Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Description : Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft

Last Answer : (D) Soft

Duriron is (A) Acid resistant, brittle and very hard (B) High silicon iron (C) Prone to breakage due to thermal expansion because of its very high co￾efficient of thermal expansion (D) All (A), (B) and (C)

Description : Duriron is (A) Acid resistant, brittle and very hard (B) High silicon iron (C) Prone to breakage due to thermal expansion because of its very high co￾efficient of thermal expansion (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Very high sulphur in pig iron makes (A) Its casting unsound (B) Its hard and machinable (C) Its brittle and malleable (D) All (A), (B) & (C)

Description : Very high sulphur in pig iron makes (A) Its casting unsound (B) Its hard and machinable (C) Its brittle and malleable (D) All (A), (B) & (C)

Last Answer : (A) Its casting unsound

White cast iron as compared to grey cast iron is (A) More durable (B) Very brittle (C) Very hard (D) All (A), (B) & (C)

Description : White cast iron as compared to grey cast iron is (A) More durable (B) Very brittle (C) Very hard (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

A dense structure of grinding wheel is not used for the (A) Ductile material (B) Hard materials (C) Brittle materials (D) Finishing cuts

Description : A dense structure of grinding wheel is not used for the (A) Ductile material (B) Hard materials (C) Brittle materials (D) Finishing cuts

Last Answer : A) Ductile material

'Shock-absorbers are usually made of steel as it – (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Description : 'Shock-absorbers are usually made of steel as it – (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Last Answer : (3) has higher elasticity Explanation: A shock absorber is a mechanical device designed to smooth out or damp shock impulse, and dissipate kinetic energy. Steel is an alloy made by combining iron and other elements, the most common of these being carbon.

'Shock-absorbers' are usually made of steel as it : (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Description : 'Shock-absorbers' are usually made of steel as it : (1) is not brittle (2) has lower elasticity (3) has higher elasticity (4) has no ductile property

Last Answer : has higher elasticity

What is hard and brittle iron that is formed into a particular shape by pouring the liquid metal into a mold?

Description : What is hard and brittle iron that is formed into a particular shape by pouring the liquid metal into a mold?

Last Answer : I think it would be cast

Why are ionic solids hard and brittle?

Description : Why are ionic solids hard and brittle?

Last Answer : Ionic solids are brittle and hard as they are bonded with electrostatic bonds.

Why are ionic solids hard and brittle?

Description : Why are ionic solids hard and brittle?

Last Answer : Ionic solids are brittle and hard as they are bonded with electrostatic bonds.

Sedimentary rocks are-----? A. Porous (Answer) B. Hard C. Rough D. Brittle E. Volcanic

Description : Sedimentary rocks are-----? A. Porous (Answer) B. Hard C. Rough D. Brittle E. Volcanic

Last Answer : A. Porous (Answer)

The materials which have the same elastic properties in all directions, are called (A) Isotropic (B) Brittle (C) Homogeneous (D) Hard

Description : The materials which have the same elastic properties in all directions, are called  (A) Isotropic  (B) Brittle  (C) Homogeneous  (D) Hard 

Last Answer : (A) Isotropic