Polyurethane cannot be used to make (A) Automobile cushion (B) Thermal insulation in refrigerator (C) Coating and adhesive (D) Fibre reinforced plastic (FRP)

Polyurethane cannot be used to make
(A) Automobile cushion
(B) Thermal insulation in refrigerator
(C) Coating and adhesive
(D) Fibre reinforced plastic (FRP)
by

1 Answer

Answer :

(D) Fibre reinforced plastic (FRP)
by

Related questions

Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Description : Fibre reinforced plastic (FRP) are (A) Made of glass fibre and thermoplastic resins (B) Anisotropic (C) Made of thermosetting resin and glass fibre (D) Both 'b' & 'c'

Last Answer : Option D

Polyvinyl alcohol is used as a (A) Cation/anion exchanger (B) Water soluble adhesive (C) Textile fibre (D) Non-sticky coating on frying pans

Description : Polyvinyl alcohol is used as a (A) Cation/anion exchanger (B) Water soluble adhesive (C) Textile fibre (D) Non-sticky coating on frying pans

Last Answer : (B) Water soluble adhesive

Polyurethane cannot be used for making (A) Mattresses & foam (B) Coating material (C) Adhesives (D) Bottles

Description : Polyurethane cannot be used for making (A) Mattresses & foam (B) Coating material (C) Adhesives (D) Bottles

Last Answer : (D) Bottles

Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Description : Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Last Answer : (4) Fibre glass Explanation: Fiberglass is a lightweight, extremely strong, and robust material. Although strength properties are somewhat lower than carbon fiber and it is less stiff, the material ... also very favorable when compared to metals, and it can be easily formed using molding processes.

Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Description : Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Last Answer : Fibre glass

Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Description : Bakelite (phenol-formaldehyde) resin cannot be used as (A) Decorative paint (B) Decorative laminates (C) Electrical insulation (D) Glass reinforced plastics

Last Answer : (A) Decorative paint

Thermocol (expanded polystyrene) is not used for (A) Low temperature thermal insulation as in refrigerator and air conditioners (B) Acoustic control and ceiling for building (C) High temperature thermal insulation in furnaces (D) Packing of delicate electronic gadgets

Description : Thermocol (expanded polystyrene) is not used for (A) Low temperature thermal insulation as in refrigerator and air conditioners (B) Acoustic control and ceiling for building (C) High temperature thermal insulation in furnaces (D) Packing of delicate electronic gadgets

Last Answer : (C) High temperature thermal insulation in furnaces

Part of the insulation of practically all electrical machinery is in the form of organic compounds which contain some amount of ______________. A. asbestos B. water C. fibre D. plastic

Description : Part of the insulation of practically all electrical machinery is in the form of organic compounds which contain some amount of ______________. A. asbestos B. water C. fibre D. plastic

Last Answer : Answer: B

Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Description : Epoxy resin is a polymer containing two or more groups of the bellow fig. is called epoxide group or ethoxyline group. It is a (A) Polyamide & an elastomer (B) Good adhesive (C) Surface coating agent (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

__________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Description : __________ is normally used for the manufacture of refrigerator components and transistor parts. (A) Polypropylene (B) Polystyrene (C) Polyester (D) Polyurethane

Last Answer : (B) Polystyrene

Transistor parts and refrigerator components are normally made of (A) Polystyrene (B) Polyester (C) High density polythene (D) Polyurethane

Description : Transistor parts and refrigerator components are normally made of (A) Polystyrene (B) Polyester (C) High density polythene (D) Polyurethane

Last Answer : (A) Polystyrene

What paper has an adhesive coating that is protected by a strip of brown waxed paper?

Description : What paper has an adhesive coating that is protected by a strip of brown waxed paper?

Last Answer : M9 paper

Which one has adhesive coating that is protected by a strip of brown waxed coating?

Description : Which one has adhesive coating that is protected by a strip of brown waxed coating?

Last Answer : m9

What is the best Polyurethane Foam Insulation in Noida?

Description : What is the best Polyurethane Foam Insulation in Noida?

Last Answer : We "BARTWAL ENGINEERING & INSULATIONS PVT LTD" Established in 2013, We are one of the well-known Supplier, Wholesaler and applicator of a comprehensive range of Hot Insulation, Cold Insulation, ... Bonded Slabs(LRB), Insulation Pipes, Insulation Mattress, Puf pipe section, Pipe section, Puf liq

How To Protect Your Home With Polyurethane Foam Insulation?

Description : How To Protect Your Home With Polyurethane Foam Insulation?

Last Answer : When you are considering insulation options that may beavailable for your home for protection from various weatherconditions you should seriously look at the benefits thatpolyurethane foam insulation will provide ... heat loss that can occur. Duringwarm weather conditions as your walls heat up the

Can Polyurethane foam be used for home insulation?

Description : Can Polyurethane foam be used for home insulation?

Last Answer : Polyurethane foam is used for home insulation. It is one of the many insulation methods available for your home.

Rexine (also called artificial leather), which is used for making table cover, automobile seat cover, shoes etc. is made by coating thick cloth with molten (A) Teflon (B) Bakelite (C) SBR (D) PVC

Description : Rexine (also called artificial leather), which is used for making table cover, automobile seat cover, shoes etc. is made by coating thick cloth with molten (A) Teflon (B) Bakelite (C) SBR (D) PVC

Last Answer : (D) PVC

Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Description : Alkyd resin e.g., glyptal resin formed by Phthalic anhydride and glycerine is not used (A) For surface coating of automobiles & air crafts (B) For fibre making (C) As plasticiser for PVC & nitrocellulose (D) For film forming materials

Last Answer : (B) For fibre making

Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Description : Thermocol is a spongy, porous, rigid or flexible foamed plastic, obtained by blowing gas/air through molten (A) Saturated polyester (B) Polyurethane (C) Polystyrene (D) Either (B) or (C)

Last Answer : (D) Either (B) or (C)

Maximum consumption of polymers is in (A) Electrical insulation (B) Toys making (C) Coating and films (D) Packaging

Description : Maximum consumption of polymers is in (A) Electrical insulation (B) Toys making (C) Coating and films (D) Packaging

Last Answer : (C) Coating and films

How much does a frp pipe cost?

Description : How much does a frp pipe cost?

Last Answer : Depending on diameter and who you buy it through frp pipe can cost from $100 to $900 per 20 feet. The cost of any particular FRP pipe depends on the design and specification for the pipe. FRP ... from $15-45 dollars for a small pipe to several thousand dollars for a large industrial use FRP pipe.

How good are Carbon Fibre reinforced Composite Materials at stopping Bullets?

Description : How good are Carbon Fibre reinforced Composite Materials at stopping Bullets?

Last Answer : There’s a thread on this subject with interesting points on a gun DB I’m not an expert on this subject at all, but I thought carbon fiber was too breakable (I’m into cars)

The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called (A) Balanced sectionB) Economic section (C) Critical section (D) All the above

Description : The section of a reinforced beam where most distant concrete fibre in compression and tension in steel attains permissible stresses simultaneously, is called (A) Balanced section B) Economic section (C) Critical section (D) All the above

Last Answer : Answer: Option D

State four point of differences between reinforced concrete and fibre reinforced concrete.

Description : State four point of differences between reinforced concrete and fibre reinforced concrete.

Last Answer : Differences between reinforced concrete and fibre reinforced concrete:  Sr. No. Reinforced concrete (RCC)  Fibre reinforced concrete (FRC) 1 In this concrete, steel bars are used as ... etc. FRC is used in tunnel lining, runway, aircraft parking, repair of dams, etc.

The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Description : The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Last Answer : (2) Polystyrene Explanation: Polystyrene is an synthetic aromatic polymer made from the monomer styrene, a liquid petrochemical. It is one of the most widely used plastics. Uses include protective ... containers (such as "clamshells"), lids, bottles, trays, tumblers, and disposable cutlery.

The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Description : The name of plastic polymer from which combs, toys, bowls etc., can be made, is (1) Polyurethane (2) Polystyrene (3) Metallic polysulphides (4) Teflon

Last Answer : Polystyrene

Why insulation or thin coating is used in the core of transformer ?

Description : Why insulation or thin coating is used in the core of transformer ?

Last Answer : In the core of a small transformer there are actually many ( E) and ( I) and different sized steel sheets of large size transformers. In fact, one type of varnish / lamination paint is applied on ... was a lot of voltage and drops. So insulation is used in the transformer to prevent this loss.

If deck machinery is expected to be idle for an extended period of time you should____________. A. have electrical safety gloves available in case of electrical shock before running B. perform a 'high pot' test to determine the condition of the insulation C. water wash the motor and controller to remove any salt that may interfere with smooth operation D. check run at regular intervals to inusre correct operation and to renew the internal coating of lubrication

Description : If deck machinery is expected to be idle for an extended period of time you should____________. A. have electrical safety gloves available in case of electrical shock before running B. perform ... run at regular intervals to inusre correct operation and to renew the internal coating of lubrication

Last Answer : Answer: D

When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Description : When light strikes a flat polished end of a fiber, the fiber loss produced can be reduced by ∙ a. Splicing ∙ b. Antireflection coating ∙ c. Insulation jacket ∙ d. All of these

Last Answer : ∙ b. Antireflection coating

Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive(d) All of the above

Description : Bakelite has the following characteristics (a) A polymer made from phenol and formaldehyde (b) A thermosetting plastic (c) Can be used as an adhesive (d) All of the above

Last Answer : All of the above

Silicone resins, which are highly water repellent and has good heat resistance cannot be used (A) As room temperature adhesive (B) As grease & lubricant

Description : Silicone resins, which are highly water repellent and has good heat resistance cannot be used (A) As room temperature adhesive (B) As grease & lubricant

Last Answer : (A) As room temperature adhesive

Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Description : Epoxy resin (A) Is a good adhesive (B) Is an elastomer (C) Cannot be used for surface coatings (D) Is a polyester

Last Answer : (A) Is a good adhesive

The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Description : The most commonly used resin for making reinforced plastic is (A) Unsaturated polyester (B) Polypropylene

Last Answer : (A) Unsaturated polyester

Maintain 850 OC for 1 hour (soaking time).  Cool the material to 60 OC in 4 hours. a) Calculate the efficiency of the furnace, if the specific heat of steel is 0.12 kcal/kgOC and fuel oil consumption per batch is 1400 litres.  GCV of fuel oil - 10200 kcal/kg,  Cost of fuel oil - Rs. 46,000/kL,  Sp. gr. of fuel oil - 0.92. b) Due to high cost of oil, the plant management decides to convert to a lower operating cost LPG fired furnace lined on the inside with ceramic fibre insulation and with an operating efficiency of 80%, for same requirement. The investment towards installation of the new furnace is Rs. 50 lakhs. Calculate the Return on Investment, if the plant operates two batches per day and 250 days in a year.  Cost of LPG - Rs. 75/kg,  GCV of LPG - 12500 kcal/kg.

Description : In a heat treatment shop, steel components are heat-treated in batches of 80 Tons. The  heat treatment cycle is as follows;  Increase temperature from 30 OC to 850 OC in 3 hours.  ... efficiency of 80%, for same requirement. The investment towards installation of  the new furnace is Rs. 50

Last Answer : Quantity of steel treated per batch - 80 Tons a. Efficiency of Furnace: Useful heat supplied to steel - 80000 x 0.12 x (850 - 30)   = 7872000 kcal/batch .1 mark Total heat ... = Rs. 64400/batch Efficiency of new LPG furnace - 80% Heat supplied in new LPG furnace - 7872000/0.8

Fibre glass insulation can be used up to temperature of

Description : Fibre glass insulation can be used up to temperature of (A) 60°C (B) 80°C (C) 130°C (D) 180°

Last Answer : Fibre glass insulation can be used up to temperature of 130°C

Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making(C) Copper has poor weldability(D) Reinforced plastics are made from both thermoplastic as well asthermosetting plastics

Description : Pick out the wrong statement. (A) Pure rubber is as useless as pure gold as a material of construction (B) Thermal conductivity of aluminium is higher than that of copper; henceit is ... has poor weldability (D) Reinforced plastics are made from both thermoplastic as well as thermosetting plastics

Last Answer : (B) Thermal conductivity of aluminium is higher than that of copper; henceit is increasingly used for utensil making

Identify modes of heat transfer involved applications with brief explanation. (1) Radiator of automobile (2) Condenser of domestic refrigerator.

Description : Identify modes of heat transfer involved applications with brief explanation. (1) Radiator of automobile (2) Condenser of domestic refrigerator.

Last Answer : Modes of heat transfer Automobile radiator-A radiator is a type of heat exchanger. It is designed to transfer heat from the hot coolant that flows through it to the air blown through ... of heat transfer plays very important deciding factor transferring heat from condenser tube to atmosphere.  

Thiokol is nothing but (A) Polysulphide rubber (B) Polyamide fibre (C) Engineering plastic (D) Expanded polystyrene

Description : Thiokol is nothing but (A) Polysulphide rubber (B) Polyamide fibre (C) Engineering plastic (D) Expanded polystyrene

Last Answer : (A) Polysulphide rubber

Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise of conveyor belt system is reduced by using urethane coated cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Description : Pick out the correct statement. (A) Noise from ball mills can be dealt with by fibre glass lined enclosures (B) Noise from vibrating chutes can be reduced by lining the metallic chute with rubber (C) Noise ... cloth conveyor belts and rubber/plastic covered metallic rollers (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre. (A) Electrical resistance (B) Thermal conductivity (C) Strength (D) None of these

Description : Psychrometry deals with the properties of gas-vapor mixture. Humidity can be determined by the measurement of the __________ of a fibre. (A) Electrical resistance (B) Thermal conductivity (C) Strength (D) None of these

Last Answer : (A) Electrical resistance

The coating on the plastic tape you use in your cassette players is w) diamagnetic x) paramagnetic y) ferromagnetic z) a permanent magnet

Description : The coating on the plastic tape you use in your cassette players is w) diamagnetic x) paramagnetic y) ferromagnetic z) a permanent magnet

Last Answer : ANSWER: Y -- FERROMAGNETIC

Water drops cannot stick to the oily surface due to – (1) lack of adhesive force (2) surface tension (3) cannot mix each other (4) water is lighter than oil

Description : Water drops cannot stick to the oily surface due to – (1) lack of adhesive force (2) surface tension (3) cannot mix each other (4) water is lighter than oil

Last Answer : (2) surface tension Explanation: The separation of oil and water is caused due to the difference in surface tension of the two liquids. The water molecules stick together tightly and does not mix ... to each other very strongly, forming an invisible "skin" of surface tension around each drop.

Water drops cannot stick to the oily surface due to (1) lack of adhesive force (2) surface tension (3) cannot mix each other (4) water is lighter than oil

Description : Water drops cannot stick to the oily surface due to (1) lack of adhesive force (2) surface tension (3) cannot mix each other (4) water is lighter than oil

Last Answer : surface tension

If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at a time B. using a thermal shunt C. pre-oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Description : If a delicate component must be soldered into a circuit, the component may be protected from the heat of the soldering process by _____________. A. operating the soldering gun not more than 60 seconds at ... oxidizing the leads to be soldered D. coating the leads to be soldered with a light oil film

Last Answer : Answer: B

Which type of glass is used for making glass reinforced plastic? -General Knowledge

Description : Which type of glass is used for making glass reinforced plastic? -General Knowledge

Last Answer : The answer is 'Quartz glass'

Which type of glass is used for making glass reinforced plastic? -General Knowledge

Description : Which type of glass is used for making glass reinforced plastic? -General Knowledge

Last Answer : answer:

Which type of glass is used for making glass reinforced plastic? -General Knowledge

Description : Which type of glass is used for making glass reinforced plastic? -General Knowledge

Last Answer : answer:

Which type of Glass is used for making glass reinforced plastic?

Description : Which type of Glass is used for making glass reinforced plastic?

Last Answer : Fiber glass

Hyperbolic cooling towers are made up of high height reinforced ………structure. a) plastic c)metal b) alloy d) concrete

Description : Hyperbolic cooling towers are made up of high height reinforced ………structure. a) plastic c)metal b) alloy d) concrete

Last Answer : concrete

The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Description : The critical radius of insulation for a spherical shell is (where, K = thermal conductivity of insulating material h0 = heat transfer coefficient at the outer surface) (A) K/h0 (B) 2K/h0 (C) h0 /K (D) h0 /2K

Last Answer : (B) 2K/h0