Write any four points that state how a traction transformer is different from ordinary transformer.

Write any four points that state how a traction transformer is different from ordinary transformer.
by

1 Answer

Answer :

Ans: 1) Specially designed to withstand severe operating conditions. 

2) Are required to have high short time peak capacity. 

3) Class A insulation , specially reinforced to withstand frequent short circuits. 

4) Can take overloads as- 50 % for 15 min , 100 % for 5 min , 120 % for instant 

5) Inpulse withstand voltage nearly 5 times higher 

6) To limit effect of SC impedance not less than 8.5 % for 10 MVA and 10 % for 12.5 MVA.
by

Related questions

State use of any four relays for the protection of traction transformer.

Description : State use of any four relays for the protection of traction transformer. 

Last Answer : Relays for the protection of traction transformers:  Inverse time over current relay as back up protection on primary (HV side) - over current protection of transformer and other equipment.  ... .  Buchholz relay - protection from incipient earth or inter winding faults inside the transformer

List four special features of traction transformer.

Description : List four special features of traction transformer.

Last Answer : Ans: 1. Specially designed to withstand severe operating conditions.  2. Have high short time peak capacity.  3. Class A insulation specially reinforced to withstand stresses of frequent short circuits.  4. Can take ... SC , impedance not less than 8.5 % for 10 MVA and 10 % for 12.5 MVA. 

For a traction transformer circuit breaker state: 1) Rated current and rupturing capacity 2) Any two tests it should be capable of withstanding 3) Overall tripping time and relay time.

Description : For a traction transformer circuit breaker state: 1) Rated current and rupturing capacity 2) Any two tests it should be capable of withstanding 3) Overall tripping time and relay time.

Last Answer : Ans: 1) Rated current --- 750 A and Rupturing capacity --- 500 MVA  2) Any two tests it should be capable of withstanding --- Breaking test , Reclosing test , Endurance test ( any two )  3) Overall tripping time --- 0.14 sec and Relay time --- 0.04 sec 

With respect to LIM propelled railway traction system state points of; i) Strengths of LIM ii) Weaknesses of LIM

Description : With respect to LIM propelled railway traction system state points of; i) Strengths of LIM ii) Weaknesses of LIM

Last Answer : Strengths of LIM propelled railway traction: 1) Pull produced for propelling the system is independent of adhesion between the wheels of motorized coach and rail. 2) No driving wheels and hence no ... traction is single phase ac power inverters are needed for operation of LIM this adds to cost.

Write selection criteria of distribution transformer with any four points.

Description : Write selection criteria of distribution transformer with any four points.

Last Answer : Selection Criteria for Distribution Transformer:  i) Ratings - The kVA ratings should comply with IS:2026 ( Part l )-1977*. The noload secondary voltage should be 433 volts for transformers to be ... is not necessary. vi) Cooling - The transformers covered in this group are generally ONAN, AN

State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

Description : State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

Last Answer : Desirable characteristics of ideal traction motors:-  A) Mechanical Properties or characteristics: 1) It should be robust in construction to withstand against continuous vibrations. 2) Weight of motor per HP ... AC series motor 3. 3-Ph, Slip-ring induction motor 4. Linear induction motor (LIM)

List any four strengths of LIM propelled railway traction.

Description : List any four strengths of LIM propelled railway traction. 

Last Answer : Ans: Strengths of LIM propelled railway traction:  1) Pull produced for propelling the system is independent of adhesion between the wheels of motorized coach and rail.  2) No driving wheels ... low mechanical losses. Useful for high speed levitation trains due to absence of gears and adhesion. 

Compare RC coupled, transformer coupled and direct coupled amplifier based on four points.

Description : Compare RC coupled, transformer coupled and direct coupled amplifier based on four points.

Last Answer : Parameter RC coupled Transformer coupled Direct coupled  Coupling element Resistor and capacitor Transformer No element Impedance matching Poor Excellent good Frequency ... Low frequency amplifier,opamp Size and cost small Large and bulky least

List any four weaknesses of LIM propelled railway traction system.

Description : List any four weaknesses of LIM propelled railway traction system.

Last Answer : Weaknesses of LIM Propelled Railway Traction System: 1. The system requires looping of all reaction rails all along the route. This considerably adds to the cost of track. 2. Since Al is relative ... in the magnetic and electric circuits at entry and exit ends of motor, poor motor efficiency.

Explain how a Programmable Logic Controller (PLC) is different from an ordinary personal computer. Also write the advantages and disadvantages of PLC.

Description : Explain how a Programmable Logic Controller (PLC) is different from an ordinary personal computer. Also write the advantages and disadvantages of PLC.

Last Answer : PLC PC 1 It has embedded processor with limited computing power It has a CPU with high computing power  2 Design of PLC is for reliable operation in industrial ... 3) Use of PLCs may be restricted in some high heat, vibration environment not suitable for electronic circuit

Write down the circuit breaker with their rating used in traction substation. Explain any one.

Description : Write down the circuit breaker with their rating used in traction substation. Explain any one.

Last Answer : Circuit Breaker With Their Rating Used in Traction Substation: Rated capacity of a circuit breaker is 750Amps at 25 kV, 500MVA. Its overall tripping time is 0.14 seconds composed of 0.04 ... but in case of traction substation application, mostly Minimum Oil Circuit Breaker (MOCB) is preferred.

Write eight desirable characteristics of traction motor.

Description : Write eight desirable characteristics of traction motor.

Last Answer : Desirable characteristics of ideal traction motors:- 1) It should be robust in construction to withstand against continuous vibrations. 2) Weight of motor per HP should be minimum in order to increase pay ... maintenance cost. 17) It should have high efficiency. 18) It should have long life.

Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Description : Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Last Answer : i) Traction :- DC Series motor  ii) Crane :- DC Series motor  iii) Lathe machine :- 3 phase Induction motor or DC shunt motor  iv) Domestic fan :- 1 phase induction motor

List two major equipment at traction sub-station with their functions.

Description : List two major equipment at traction sub-station with their functions.

Last Answer : Major equipment at traction substation:  1) Transformer: To step down the busbar voltage from 132 kV to 25 kV. 2) Circuit Breaker: To disconnect the circuit in case of fault. Transformer CB ... on OHE. 3) Interrupter: To disconnect the circuit in case of fault. It cannot operate automatically.

Draw a neat labeled diagram to show protective system for AC traction and give the function of each relay used in it.

Description : Draw a neat labeled diagram to show protective system for AC traction and give the function of each relay used in it. 

Last Answer : Protective system for AC traction:  Function Of Each Relay: For transformer -  Inverse time over current relay- as back up protection on primary (HV side) over current ... against faults near substation  Under voltage relay - protection against faults far away from substation

An auto transformer is preferred over an ordinary two winding transformer due to: a) Safety of operation b) Availability of taps on secondary c) Copper savings d) All the above

Description : An auto transformer is preferred over an ordinary two winding transformer due to: a) Safety of operation b) Availability of taps on secondary c) Copper savings d) All the above

Last Answer : Ans: C

Write any four advantages of instrument transformer.

Description : Write any four advantages of instrument transformer.

Last Answer : Advantages of instrument transformer: 1. Extension of instrument range is possible. 2. Isolation of instruments from high voltage side. 3. Power loss is less as compared to shunts and multipliers. 4 ... measurement. 5. It is economical method of range extension. 6. Increases in safety of operator.

State eight requirements of an ideal traction system.

Description : State eight requirements of an ideal traction system.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Draw a neat labelled diagram of feeding post and write any four points related to it.

Description : Draw a neat labelled diagram of feeding post and write any four points related to it.

Last Answer : Feeding post: 1) Each feeder has two conductors one insulated for 25 kV (connected to bus-bar) and other for 3 kV (connected to track for return current). 2) Located as near as ... are supposed to operate only under normal current as they are not provided with protection for the same. 

Write any four important points related to the construction of feeding post.

Description : Write any four important points related to the construction of feeding post.

Last Answer : Ans: Important points related to construction of feeding post:  1) Each feeder has two conductors one insulated for 25 kV (connected to busbar) and other for 3 kV (connected to track for ... are supposed to operate only under normal current as they are not provided with protection for the same.

State four properties of Ideal transformer:

Description : State four properties of Ideal transformer:

Last Answer : Properties of Ideal transformer: 1) No losses (iron and copper), hence no temperature rise 2) Zero winding resistance and leakage reactance 3) No voltage drop i.e. E1 = V1, ... R losses]   4) Zero magnetic leakage (coefficient of coupling between primary and secondary windings is unity).

Is cat litter, used for traction in an ice-slick driveway, a hazard to birds or wildlife?

Description : Is cat litter, used for traction in an ice-slick driveway, a hazard to birds or wildlife?

Last Answer : Don’t use cat litter that is clay based. That would turn into a slippery injury inducing trap.

Why do the current "witch hunts" garner so much traction?

Description : Why do the current "witch hunts" garner so much traction?

Last Answer : As if the same thing is not happening with Trump. It was like that with George Bush to a degree also. Whoever the president is a witch hunt is guaranteed. I can’t say the press is honest.

How can I add traction to rope sandals?

Description : How can I add traction to rope sandals?

Last Answer : What about the wax used for skis?

The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Description : The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Last Answer : c.boundary condition

The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Description : The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Last Answer : a.discretization

land Traction What ?

Last Answer : land Traction Yes To the ground Digging Or Scratch Weed-free , soft , loose, Crunchy To do Process.

When enough force is applied to break traction the car will do until traction is restored?

Description : When enough force is applied to break traction the car will do until traction is restored?

Last Answer : Need answer

When the car is still moving traction between the tire and road is least when?

Description : When the car is still moving traction between the tire and road is least when?

Last Answer : when you are skidding

How do you turn on traction control on Lexus?

Description : How do you turn on traction control on Lexus?

Last Answer : Need answer

When traction is poor as in the rain why should a driver accelerate slowly?

Description : When traction is poor as in the rain why should a driver accelerate slowly?

Last Answer : Slow acceleration allows the tyres time to grip the road'ssurface better.

When traction is poor you should rock your way out by using?

Description : When traction is poor you should rock your way out by using?

Last Answer : Need answer

When traction is poor as in the rain why should a driver accelerate slowly?

Description : When traction is poor as in the rain why should a driver accelerate slowly?

Last Answer : Slow acceleration allows the tyres time to grip the road'ssurface better.

Traction?

Description : Traction?

Last Answer : DefinitionAs a general term, traction means pulling on part of the body.Most often, traction uses mechanical force (sometimes generated by weights and pulleys) to put tension on a displaced bone or joint, such ... another position, a length of time to use the tension, and a way to keep the tension.

Is the BFGoodrich Traction T/A H tires able to perform well on dirt roads?

Description : Is the BFGoodrich Traction T/A H tires able to perform well on dirt roads?

Last Answer : They will work just fine as long as its only a dirt road your going on.

What is electric traction?

Description : What is electric traction?

Last Answer : Traction means using the electric power for traction system i.e. for railways, trams, trolleys etc. electric traction means use of the electricity for all these. Now a day, magnetic traction is also used for bullet trains. Basically dc motors are used for electric traction systems.

What Is Electric Traction?

Description : What Is Electric Traction?

Last Answer : Electric traction me using the electric power for traction system (i.e. for railways,trams, trolleys etc). Electric traction me use of the electricity for railways,trams, trolleys etc. Now a ... traction is also used for bullet trains.and basically dc motors are used for electric traction systems.

What is Electric traction?

Description : What is Electric traction?

Last Answer : A:Electric traction means using the electric power for traction system to drive the locomotives.

When caring for the patient in traction, the nurse is guided by which of the following principles? a) Skeletal traction is never interrupted. Skeletal traction is applied directly to the bone and is never interrupted.

Description : When caring for the patient in traction, the nurse is guided by which of the following principles? a) Skeletal traction is never interrupted. Skeletal traction is applied directly to the ... are removed routinely. Traction must be continuous to be effective in reducing and immobilizing fractures.

Last Answer : a) Skeletal traction is never interrupted. Skeletal traction is applied directly to the bone and is never interrupted.

For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Description : For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Last Answer : Answer: Option D

Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Description : Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Last Answer : (D) Earth

A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm earth is 0.5, the rimpull which this tractor can exert without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Description : A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm ... without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Last Answer : (B) 12500 kg

During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a

Description : During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a

Last Answer : ans a

The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Description : The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Last Answer : ans d

pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Description : pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Last Answer : ans d

pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Description : pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Last Answer : ans a

Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Description : Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Last Answer : Braking performance 

Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Description : Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Last Answer : ans d

Electronic Stability Program is use to a) Assist in braking b) Reducing loss of traction c) Use in ECU d) for proper loading and unloading of weight in vehicle

Description : Electronic Stability Program is use to a) Assist in braking b) Reducing loss of traction c) Use in ECU d) for proper loading and unloading of weight in vehicle

Last Answer : b) Reducing loss of traction