When the car is still moving traction between the tire and road is least when?

When the car is still moving traction between the tire and road is least when?
by

1 Answer

Answer :

when you are skidding
by
selected by

Related questions

For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Description : For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Last Answer : Answer: Option D

What type of friction cause a car tire to turn on the road?

Description : What type of friction cause a car tire to turn on the road?

Last Answer : What is the answer ?

How do I change a flat tire on the side of the road.?

Description : How do I change a flat tire on the side of the road.?

Last Answer : First you have to remember to loosen lug nuts before jacking up the car. You also have to remember to put the jack on a flat surface underneath the car (You don't have to lift the car high off the ground ... you take it off you have to replace it with the spare tire, and screw the lug nuts back on.

When enough force is applied to break traction the car will do until traction is restored?

Description : When enough force is applied to break traction the car will do until traction is restored?

Last Answer : Need answer

Is it a bad idea to just go look (one might say go tire-kicking but this would'nt be a realistic purchase for at least a decade) at an exotic dealership?

Description : Is it a bad idea to just go look (one might say go tire-kicking but this would'nt be a realistic purchase for at least a decade) at an exotic dealership?

Last Answer : Go for it, why not? Have fun, enjoy the cars, just don’t do a Paul Walker. lol

If you were driving home at night and saw a small animal in the road, half dead but moving (as if recently struck by a car) would you run it over to put it out of it's misery?

Description : If you were driving home at night and saw a small animal in the road, half dead but moving (as if recently struck by a car) would you run it over to put it out of it's misery?

Last Answer : Perhaps if I didn’t think it could be saved.

A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating forward while going around a curve of radius equal to the maximum height attained by the ball c.107 dynes d.accelerating forwardA block A is dropped down a smooth inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Description : A boy sitting in a rail road car throws a ball straight up into the air. The ball will fall back into his hands when the rail road car is a.moving at constant velocity b.accelerating ... inclined plane, while another identical block B is released for free fall from the same height e.decelerating

Last Answer : a. moving at constant velocity

Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on the initial velocity ( v 0 ) and the braking capacity, or deceleration, ?a that is caused by the braking. A car travelling at speed 72km/hr suddenly applies the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Description : Stopping distance of vehicles : When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on ... the brake with the deceleration of 5m/s2. Find the stopping distance of the car -Science

Last Answer : Here u=72 km/hr = 72×10003600m/s=2072×10003600m/s=20 m/s , v=0 a= -5 m/s2 Now using the relation v2=u2+2asv2=u2+2as 0=(20)2+2×(−5)×s0=(20)2+2×(−5)×s s=40ms=40m

A car moving at a speed 10 m/s on a straight road is ahead of car B moving in the same direction at 6 m/s. Find the velocity of A relative

Description : A car moving at a speed 10 m/s on a straight road is ahead of car B moving in the same direction at 6 m/s. Find the velocity of A relative

Last Answer : A car moving at a speed 10 m/s on a straight road is ahead of car B moving in the same ... Find the velocity of A relative to B and vice-versa.

A car moving along a straight road with a speed of 120 km/hr, is brought to rest by applying brakes.

Description : A car moving along a straight road with a speed of 120 km/hr, is brought to rest by applying brakes.

Last Answer : A car moving along a straight road with a speed of 120 km/hr, is brought to rest by applying brakes. ... (ii) time taken by the car to come to rest.

A car moving on a straight road is a ____.

Description : A car moving on a straight road is a ____.

Last Answer : Rectilinear motion

A car is moving along a straight horizontal road at a speed of 20 meters per second. The brakes are applied and a constant force of 5000 Newtons decelerates the car to a stop in 10 seconds. The mass of the car is: w) 1250 kilograms x) 2500 kilograms y) 5000 kilograms z) 10,000 kilograms

Description : A car is moving along a straight horizontal road at a speed of 20 meters per second. The brakes are applied and a constant force of 5000 Newtons decelerates the car to a stop in 10 seconds. The mass of the car is: w) 1250 kilograms x) 2500 kilograms y) 5000 kilograms z) 10,000 kilograms

Last Answer : ANSWER: X -- 2500 KILOGRAMS

The tire on the right is still running.

Description : Once every fortnight I go to the pump because I have a soft front right wheel. I have a Favorita 135 GLX. I didn't like it anymore so I exchanged my bike for a spare one. But it worked too. So I changed the ... it goes. When I put the same wheel on the left, it doesn't go away. I can't explain it.

Last Answer : Don't you happen to park your car on a curb or uneven surface? I mean, what are they doing?

A car moving with a speed of 40 km/h can be stopped by applying brakes after at least 2m. If the same car is moving with a speed of 80 km/h., what is

Description : A car moving with a speed of 40 km/h can be stopped by applying brakes after at least 2m. If the same car is moving with a speed of 80 km/h., what is

Last Answer : A car moving with a speed of 40 km/h can be stopped by applying brakes after at least 2m. If the same car is moving ... A. 2 m B. 4 m C. 6 m D. 8 m

A car moving with a speed of 40 km/hr can be stopped by applying brakes after at least 2 m. If the same car is moving with a speed of 80 km/hr. What i

Description : A car moving with a speed of 40 km/hr can be stopped by applying brakes after at least 2 m. If the same car is moving with a speed of 80 km/hr. What i

Last Answer : A car moving with a speed of 40 km/hr can be stopped by applying brakes after at least 2 m. If the same car is moving ... A. 2 m B. 4 m C. 6 m D. 8 m

Is cat litter, used for traction in an ice-slick driveway, a hazard to birds or wildlife?

Description : Is cat litter, used for traction in an ice-slick driveway, a hazard to birds or wildlife?

Last Answer : Don’t use cat litter that is clay based. That would turn into a slippery injury inducing trap.

Why do the current "witch hunts" garner so much traction?

Description : Why do the current "witch hunts" garner so much traction?

Last Answer : As if the same thing is not happening with Trump. It was like that with George Bush to a degree also. Whoever the president is a witch hunt is guaranteed. I can’t say the press is honest.

How can I add traction to rope sandals?

Description : How can I add traction to rope sandals?

Last Answer : What about the wax used for skis?

The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Description : The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Last Answer : c.boundary condition

The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Description : The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Last Answer : a.discretization

land Traction What ?

Last Answer : land Traction Yes To the ground Digging Or Scratch Weed-free , soft , loose, Crunchy To do Process.

How do you turn on traction control on Lexus?

Description : How do you turn on traction control on Lexus?

Last Answer : Need answer

When traction is poor as in the rain why should a driver accelerate slowly?

Description : When traction is poor as in the rain why should a driver accelerate slowly?

Last Answer : Slow acceleration allows the tyres time to grip the road'ssurface better.

When traction is poor you should rock your way out by using?

Description : When traction is poor you should rock your way out by using?

Last Answer : Need answer

When traction is poor as in the rain why should a driver accelerate slowly?

Description : When traction is poor as in the rain why should a driver accelerate slowly?

Last Answer : Slow acceleration allows the tyres time to grip the road'ssurface better.

Traction?

Description : Traction?

Last Answer : DefinitionAs a general term, traction means pulling on part of the body.Most often, traction uses mechanical force (sometimes generated by weights and pulleys) to put tension on a displaced bone or joint, such ... another position, a length of time to use the tension, and a way to keep the tension.

Is the BFGoodrich Traction T/A H tires able to perform well on dirt roads?

Description : Is the BFGoodrich Traction T/A H tires able to perform well on dirt roads?

Last Answer : They will work just fine as long as its only a dirt road your going on.

What is electric traction?

Description : What is electric traction?

Last Answer : Traction means using the electric power for traction system i.e. for railways, trams, trolleys etc. electric traction means use of the electricity for all these. Now a day, magnetic traction is also used for bullet trains. Basically dc motors are used for electric traction systems.

What Is Electric Traction?

Description : What Is Electric Traction?

Last Answer : Electric traction me using the electric power for traction system (i.e. for railways,trams, trolleys etc). Electric traction me use of the electricity for railways,trams, trolleys etc. Now a ... traction is also used for bullet trains.and basically dc motors are used for electric traction systems.

What is Electric traction?

Description : What is Electric traction?

Last Answer : A:Electric traction means using the electric power for traction system to drive the locomotives.

When caring for the patient in traction, the nurse is guided by which of the following principles? a) Skeletal traction is never interrupted. Skeletal traction is applied directly to the bone and is never interrupted.

Description : When caring for the patient in traction, the nurse is guided by which of the following principles? a) Skeletal traction is never interrupted. Skeletal traction is applied directly to the ... are removed routinely. Traction must be continuous to be effective in reducing and immobilizing fractures.

Last Answer : a) Skeletal traction is never interrupted. Skeletal traction is applied directly to the bone and is never interrupted.

Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Description : Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Last Answer : (D) Earth

A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm earth is 0.5, the rimpull which this tractor can exert without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Description : A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm ... without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Last Answer : (B) 12500 kg

During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a

Description : During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a

Last Answer : ans a

The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Description : The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Last Answer : ans d

pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Description : pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Last Answer : ans d

pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Description : pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Last Answer : ans a

Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Description : Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Last Answer : Braking performance 

Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Description : Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Last Answer : ans d

Electronic Stability Program is use to a) Assist in braking b) Reducing loss of traction c) Use in ECU d) for proper loading and unloading of weight in vehicle

Description : Electronic Stability Program is use to a) Assist in braking b) Reducing loss of traction c) Use in ECU d) for proper loading and unloading of weight in vehicle

Last Answer : b) Reducing loss of traction

Formula for adding weight (ballast) on tractor tyres working in loose wet soil for good traction a)(km/hr × kg/PTO kw)=540 b)( km/hr × kg/PTO kw)=670 c)( km/hr × kg/PTO HP)=540 d)( km/hr × kg/PTO HP)=670

Description : Formula for adding weight (ballast) on tractor tyres working in loose wet soil for good traction a)(km/hr × kg/PTO kw)=540 b)( km/hr × kg/PTO kw)=670 c)( km/hr × kg/PTO HP)=540 d)( km/hr × kg/PTO HP)=670

Last Answer : a)(km/hr × kg/PTO kw)=540

A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm

Description : A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm

Last Answer : a.500 rpm

A power tiller is most suited for rotary cultivation because: A. It generates negative draft B. Its traction requirements are low C. It provides high degree of soil pulverization D. All of the above

Description : A power tiller is most suited for rotary cultivation because: A. It generates negative draft B. Its traction requirements are low C. It provides high degree of soil pulverization D. All of the above

Last Answer : D. All of the above

Which of the following in an application of D.C. motors? (a) Traction (b) Drives for process industry (c) Battery driven vehicles (d) Automatic control (e) All of the above

Description : Which of the following in an application of D.C. motors? (a) Traction (b) Drives for process industry (c) Battery driven vehicles (d) Automatic control (e) All of the above

Last Answer : (e) All of the above

Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Description : Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Last Answer : i) Traction :- DC Series motor  ii) Crane :- DC Series motor  iii) Lathe machine :- 3 phase Induction motor or DC shunt motor  iv) Domestic fan :- 1 phase induction motor

Give protection scheme used for 25kV catenary protection for AC traction.

Description : Give protection scheme used for 25kV catenary protection for AC traction.

Last Answer : Protection Scheme Used for 25kV Catenary Protection for AC Traction: As shown in the figure below the scheme consists of 1) MHO relay that makes use of the impedance phase angle to get proper ... adjustment. 2) Over current relay. 3) Under voltage relay for low voltage protection.

Write down the circuit breaker with their rating used in traction substation. Explain any one.

Description : Write down the circuit breaker with their rating used in traction substation. Explain any one.

Last Answer : Circuit Breaker With Their Rating Used in Traction Substation: Rated capacity of a circuit breaker is 750Amps at 25 kV, 500MVA. Its overall tripping time is 0.14 seconds composed of 0.04 ... but in case of traction substation application, mostly Minimum Oil Circuit Breaker (MOCB) is preferred.

List any four weaknesses of LIM propelled railway traction system.

Description : List any four weaknesses of LIM propelled railway traction system.

Last Answer : Weaknesses of LIM Propelled Railway Traction System: 1. The system requires looping of all reaction rails all along the route. This considerably adds to the cost of track. 2. Since Al is relative ... in the magnetic and electric circuits at entry and exit ends of motor, poor motor efficiency.

Explain the suitability of 3-phase induction motor for traction service.

Description : Explain the suitability of 3-phase induction motor for traction service. 

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

Description : State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

Last Answer : Desirable characteristics of ideal traction motors:-  A) Mechanical Properties or characteristics: 1) It should be robust in construction to withstand against continuous vibrations. 2) Weight of motor per HP ... AC series motor 3. 3-Ph, Slip-ring induction motor 4. Linear induction motor (LIM)