List four special features of traction transformer.

List four special features of traction transformer.
by

1 Answer

Answer :

Ans: 1. Specially designed to withstand severe operating conditions. 

2. Have high short time peak capacity. 

3. Class A insulation specially reinforced to withstand stresses of frequent short circuits. 

4. Can take overloads as- 50 % for 15 min , 100 % for 5 min , 120 % for instantaneous 

5. Impulse withstand voltage nearly 5 times higher 

6. To limits the effect of SC , impedance not less than 8.5 % for 10 MVA and 10 % for 12.5 MVA. 
by

Related questions

List special features of isolation transformer with any four applications.

Description : List special features  of isolation transformer with any four applications.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

Write any four points that state how a traction transformer is different from ordinary transformer.

Description : Write any four points that state how a traction transformer is different from ordinary transformer.

Last Answer : Ans: 1) Specially designed to withstand severe operating conditions.  2) Are required to have high short time peak capacity.  3) Class A insulation , specially reinforced to withstand frequent short circuits.  4) Can ... effect of SC impedance not less than 8.5 % for 10 MVA and 10 % for 12.5 MVA.

State use of any four relays for the protection of traction transformer.

Description : State use of any four relays for the protection of traction transformer. 

Last Answer : Relays for the protection of traction transformers:  Inverse time over current relay as back up protection on primary (HV side) - over current protection of transformer and other equipment.  ... .  Buchholz relay - protection from incipient earth or inter winding faults inside the transformer

List any four strengths of LIM propelled railway traction.

Description : List any four strengths of LIM propelled railway traction. 

Last Answer : Ans: Strengths of LIM propelled railway traction:  1) Pull produced for propelling the system is independent of adhesion between the wheels of motorized coach and rail.  2) No driving wheels ... low mechanical losses. Useful for high speed levitation trains due to absence of gears and adhesion. 

For a traction transformer circuit breaker state: 1) Rated current and rupturing capacity 2) Any two tests it should be capable of withstanding 3) Overall tripping time and relay time.

Description : For a traction transformer circuit breaker state: 1) Rated current and rupturing capacity 2) Any two tests it should be capable of withstanding 3) Overall tripping time and relay time.

Last Answer : Ans: 1) Rated current --- 750 A and Rupturing capacity --- 500 MVA  2) Any two tests it should be capable of withstanding --- Breaking test , Reclosing test , Endurance test ( any two )  3) Overall tripping time --- 0.14 sec and Relay time --- 0.04 sec 

List any four weaknesses of LIM propelled railway traction system.

Description : List any four weaknesses of LIM propelled railway traction system.

Last Answer : Weaknesses of LIM Propelled Railway Traction System: 1. The system requires looping of all reaction rails all along the route. This considerably adds to the cost of track. 2. Since Al is relative ... in the magnetic and electric circuits at entry and exit ends of motor, poor motor efficiency.

List two major equipment at traction sub-station with their functions.

Description : List two major equipment at traction sub-station with their functions.

Last Answer : Major equipment at traction substation:  1) Transformer: To step down the busbar voltage from 132 kV to 25 kV. 2) Circuit Breaker: To disconnect the circuit in case of fault. Transformer CB ... on OHE. 3) Interrupter: To disconnect the circuit in case of fault. It cannot operate automatically.

State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

Description : State any four desirable characteristics of ideal traction motor. State the names of different traction motor used.

Last Answer : Desirable characteristics of ideal traction motors:-  A) Mechanical Properties or characteristics: 1) It should be robust in construction to withstand against continuous vibrations. 2) Weight of motor per HP ... AC series motor 3. 3-Ph, Slip-ring induction motor 4. Linear induction motor (LIM)

Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Description : Suggest electric motors for i) traction ii) crane iii) lathe machine iv) domestic fan.

Last Answer : i) Traction :- DC Series motor  ii) Crane :- DC Series motor  iii) Lathe machine :- 3 phase Induction motor or DC shunt motor  iv) Domestic fan :- 1 phase induction motor

With respect to LIM propelled railway traction system state points of; i) Strengths of LIM ii) Weaknesses of LIM

Description : With respect to LIM propelled railway traction system state points of; i) Strengths of LIM ii) Weaknesses of LIM

Last Answer : Strengths of LIM propelled railway traction: 1) Pull produced for propelling the system is independent of adhesion between the wheels of motorized coach and rail. 2) No driving wheels and hence no ... traction is single phase ac power inverters are needed for operation of LIM this adds to cost.

Draw a neat labeled diagram to show protective system for AC traction and give the function of each relay used in it.

Description : Draw a neat labeled diagram to show protective system for AC traction and give the function of each relay used in it. 

Last Answer : Protective system for AC traction:  Function Of Each Relay: For transformer -  Inverse time over current relay- as back up protection on primary (HV side) over current ... against faults near substation  Under voltage relay - protection against faults far away from substation

List any four salient features of 8085 microprocessor

Description : List any four salient features of 8085 microprocessor

Last Answer : Features of 8085:  1. 16 address line so 216=64 Kbytes of memory can be addressed.  2. Operating clock frequency is 3MHz and minimum clock frequency is 500 KHz.  3. On chip bus controller ... duty cycle TTL clock  10. Provide 2 serial I/O lines, so peripheral can be interfaced with 8085 μp

List out any four salient features of hydro generator.

Description : List out any four salient features of hydro generator.

Last Answer : Following are the salient features of a Hydro Generator (alternator):  It is 3-ph hydro generator (alternator). It is robust in construction. A separate excitation is given to ... & under frequency protection, 5. Over temperature protection are main protections provided to generator.

List two special feature of welding transformer.

Description : List two special feature of welding transformer.

Last Answer : Special features of welding transformer: i) It is a step down transformer that reduces the source voltage to a voltage desired according to the demands of the welding process. ii) Having large primary turns and less ... V ii) Secondary voltage - 40 to 60 V iii) Secondary current - 200 to 600 A

Draw schematic diagram of welding transformer showing constructional features of a welding transformer. Also explain its working.

Description : Draw schematic diagram of welding transformer showing constructional features of a welding transformer. Also explain its working.

Last Answer : Constructional features of welding transformer: Working of welding transformer: i) It is a step down transformer that reduces the voltage from the source voltage to a voltage desired according to the demands of ... 230 V, 415 V Secondary voltage - 40 to 60 V Secondary current - 200 to 600 A

Give any three features and any two applications of welding transformer.

Description : Give Any Three Features And Any Two Applications Of Welding Transformer.

Last Answer : .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }

List four applications of a transformer.

Description : List four applications of a transformer.

Last Answer : It can raise or lower the voltage or current in an AC circuit. It can act as an impedance transferring device by increasing or decreasing the value of a capacitor, inductor or resistance in an ... two circuits electrically. It can be used to prevent DC from passing from one circuit to another

Is cat litter, used for traction in an ice-slick driveway, a hazard to birds or wildlife?

Description : Is cat litter, used for traction in an ice-slick driveway, a hazard to birds or wildlife?

Last Answer : Don’t use cat litter that is clay based. That would turn into a slippery injury inducing trap.

Why do the current "witch hunts" garner so much traction?

Description : Why do the current "witch hunts" garner so much traction?

Last Answer : As if the same thing is not happening with Trump. It was like that with George Bush to a degree also. Whoever the president is a witch hunt is guaranteed. I can’t say the press is honest.

How can I add traction to rope sandals?

Description : How can I add traction to rope sandals?

Last Answer : What about the wax used for skis?

The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Description : The nature of loading at various locations and other surfaces conditions called a.friction b.traction c.boundary condition d.surfacing

Last Answer : c.boundary condition

The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Description : The art of subdividing the structure into a convenient number of smaller elements is knownas a.discretization b.assemblage c.continuum d.traction

Last Answer : a.discretization

land Traction What ?

Last Answer : land Traction Yes To the ground Digging Or Scratch Weed-free , soft , loose, Crunchy To do Process.

When enough force is applied to break traction the car will do until traction is restored?

Description : When enough force is applied to break traction the car will do until traction is restored?

Last Answer : Need answer

When the car is still moving traction between the tire and road is least when?

Description : When the car is still moving traction between the tire and road is least when?

Last Answer : when you are skidding

How do you turn on traction control on Lexus?

Description : How do you turn on traction control on Lexus?

Last Answer : Need answer

When traction is poor as in the rain why should a driver accelerate slowly?

Description : When traction is poor as in the rain why should a driver accelerate slowly?

Last Answer : Slow acceleration allows the tyres time to grip the road'ssurface better.

When traction is poor you should rock your way out by using?

Description : When traction is poor you should rock your way out by using?

Last Answer : Need answer

When traction is poor as in the rain why should a driver accelerate slowly?

Description : When traction is poor as in the rain why should a driver accelerate slowly?

Last Answer : Slow acceleration allows the tyres time to grip the road'ssurface better.

Traction?

Description : Traction?

Last Answer : DefinitionAs a general term, traction means pulling on part of the body.Most often, traction uses mechanical force (sometimes generated by weights and pulleys) to put tension on a displaced bone or joint, such ... another position, a length of time to use the tension, and a way to keep the tension.

Is the BFGoodrich Traction T/A H tires able to perform well on dirt roads?

Description : Is the BFGoodrich Traction T/A H tires able to perform well on dirt roads?

Last Answer : They will work just fine as long as its only a dirt road your going on.

What is electric traction?

Description : What is electric traction?

Last Answer : Traction means using the electric power for traction system i.e. for railways, trams, trolleys etc. electric traction means use of the electricity for all these. Now a day, magnetic traction is also used for bullet trains. Basically dc motors are used for electric traction systems.

What Is Electric Traction?

Description : What Is Electric Traction?

Last Answer : Electric traction me using the electric power for traction system (i.e. for railways,trams, trolleys etc). Electric traction me use of the electricity for railways,trams, trolleys etc. Now a ... traction is also used for bullet trains.and basically dc motors are used for electric traction systems.

What is Electric traction?

Description : What is Electric traction?

Last Answer : A:Electric traction means using the electric power for traction system to drive the locomotives.

When caring for the patient in traction, the nurse is guided by which of the following principles? a) Skeletal traction is never interrupted. Skeletal traction is applied directly to the bone and is never interrupted.

Description : When caring for the patient in traction, the nurse is guided by which of the following principles? a) Skeletal traction is never interrupted. Skeletal traction is applied directly to the ... are removed routinely. Traction must be continuous to be effective in reducing and immobilizing fractures.

Last Answer : a) Skeletal traction is never interrupted. Skeletal traction is applied directly to the bone and is never interrupted.

For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Description : For calculating the tractive force along an upgrade of an asphalt road, the most probable value of the co-efficient of traction resistance is assumed (A) 1/10 (B) 1/20 (C) 1/30 (D) 1/100

Last Answer : Answer: Option D

Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Description : Which one of the following surfaces will give highest coefficient of traction while using crawler track tractors? (A) Ice (B) Concrete (C) Loose sand (D) Earth

Last Answer : (D) Earth

A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm earth is 0.5, the rimpull which this tractor can exert without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Description : A wheeled tractor hauling unit is working on firm earth. The total loaded weight distribution of this unit is: Drive wheels: 25000 kg Scraper wheels: 10000 kg If the coefficient of traction for wheeled tractor on firm ... without slipping is (A) 10000 kg (B) 12500 kg (C) 22500 kg (D) 5000 kg

Last Answer : (B) 12500 kg

During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a

Description : During turning the traction while operating MB plough a) Plough should be lifted b) Plough should not be lifted c) Stop the tractor and lift the plough d) Unable to lift Ans. a

Last Answer : ans a

The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Description : The traction on rear wheels can be increased by increasing a) Weight on rear wheels b) Weight on front wheels c) Decreasing inflation pressure d) Both a and c Ans. d

Last Answer : ans d

pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Description : pressure should be high in front wheel of the tractor because of a) high slippage b) low slippage c) high traction d) easy steer ability Ans. d

Last Answer : ans d

pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Description : pressure should be less in rear wheel as compare to front wheel because of a) high traction b) low draft c) high draft d) none of these Ans. a

Last Answer : ans a

Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Description : Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Last Answer : Braking performance 

Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Description : Differential lock in tractor is used to improve a) Lateral stability b) Braking performance c) Hydraulic lift d) Traction of a wheel

Last Answer : ans d

Electronic Stability Program is use to a) Assist in braking b) Reducing loss of traction c) Use in ECU d) for proper loading and unloading of weight in vehicle

Description : Electronic Stability Program is use to a) Assist in braking b) Reducing loss of traction c) Use in ECU d) for proper loading and unloading of weight in vehicle

Last Answer : b) Reducing loss of traction

Formula for adding weight (ballast) on tractor tyres working in loose wet soil for good traction a)(km/hr × kg/PTO kw)=540 b)( km/hr × kg/PTO kw)=670 c)( km/hr × kg/PTO HP)=540 d)( km/hr × kg/PTO HP)=670

Description : Formula for adding weight (ballast) on tractor tyres working in loose wet soil for good traction a)(km/hr × kg/PTO kw)=540 b)( km/hr × kg/PTO kw)=670 c)( km/hr × kg/PTO HP)=540 d)( km/hr × kg/PTO HP)=670

Last Answer : a)(km/hr × kg/PTO kw)=540

A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm

Description : A traction fitted with diesel engine will have good slogging ability as lugging ability if it has a reserve of a.500 rpm d.200 rpm c.300 rpm e.1000 rpm

Last Answer : a.500 rpm

A power tiller is most suited for rotary cultivation because: A. It generates negative draft B. Its traction requirements are low C. It provides high degree of soil pulverization D. All of the above

Description : A power tiller is most suited for rotary cultivation because: A. It generates negative draft B. Its traction requirements are low C. It provides high degree of soil pulverization D. All of the above

Last Answer : D. All of the above

Which of the following in an application of D.C. motors? (a) Traction (b) Drives for process industry (c) Battery driven vehicles (d) Automatic control (e) All of the above

Description : Which of the following in an application of D.C. motors? (a) Traction (b) Drives for process industry (c) Battery driven vehicles (d) Automatic control (e) All of the above

Last Answer : (e) All of the above

Give protection scheme used for 25kV catenary protection for AC traction.

Description : Give protection scheme used for 25kV catenary protection for AC traction.

Last Answer : Protection Scheme Used for 25kV Catenary Protection for AC Traction: As shown in the figure below the scheme consists of 1) MHO relay that makes use of the impedance phase angle to get proper ... adjustment. 2) Over current relay. 3) Under voltage relay for low voltage protection.