Description : . To improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing
Last Answer : (A) Spheroidising
Description : o improve the machinability of steel, it is generally subjected to (A) Spheroidising (B) Tempering (C) Normalising (D) Annealing
Last Answer : Option A
Description : Spheroidising of a material is a/an __________ process. (A) Normalising (B) Annealing (C) Tempering (D) Hardening
Last Answer : (B) Annealing
Description : Heating the Hypo-eutectoid steels to 30°C above the upper critical temperature line, soaking at that temperature and then cooling slowly to the room temperature to form a pearlite & ferrite structure is called (A) Tempering (B) Hardening (C) Annealing (D) Normalising
Last Answer : Option C
Description : __________ of hard alloy and tool steel is done to make it easily machinable. (A) Case carburising (B) Tempering (C) Normalising (D) Annealing
Last Answer : (B) Tempering
Description : Nitriding of steel is a process for (A) Case hardening (B) Spheroidising (C) Normalising (D) Annealing
Last Answer : (A) Case hardening
Description : Globular form of cementite is formed during the __________ process. (A) Spheroidising (B) Hardening (C) Annealing (D) Normalising
Last Answer : (B) Hardening
Description : The heat treatment process applied to cold formed steel parts is (A) Normalising (B) Tempering (C) Artificial ageing (D) Solution annealing
Last Answer : (D) Solution annealing
Description : Which of the following heat treatment processes is used for softening the hardened material? (A) Normalising (B) Tempering (C) Annealing (D) None of these
Description : The heat treatment process to which castings and the steel balls produced by cold heading are subjected is (A) Tempering (B) Normalising (C) Annealing (D) None of these
Last Answer : (B) Normalising
Description : Hardened steel is softened by (A) Normalising (B) Tempering (C) Annealing (D) Carburising
Description : Softening of hardened steel is done by its (A) Normalising (B) Tempering (C) Annealing (D) Carburising
Description : Post weld heat treatment is done by (A) Normalising (B) Stress relieving (C) Tempering (D) Solution annealing
Last Answer : (B) Stress relieving
Last Answer : (A) Normalising
Description : Which of the following heat treatment processes is usually applied to castings? (A) Tempering (B) Annealing (C) Normalising (D) Carburising
Last Answer : (D) Carburising
Description : Pick out the correct statement. (A) Hot worked materials are subjected to annealing to remove internal stresses (B) Annealing of steel hardens it slightly (C) Normalising of a material induces stresses (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness
Last Answer : (D) Tempering of a material improves ductility & toughness but reduces hardness & brittleness Share
Description : Normalising does not __________ of a metal. (A) Improve machinability & tensile strength (B) Remove internal stresses (C) Refine the structure (D) Remove strains caused by cold working
Last Answer : Option B
Description : Tempering of a material does not improve its (A) Machinability (B) Toughness (C) Internal stress level (D) Softness
Last Answer : A) Machinability
Description : To improve the machinability of steel by its softening, it is subjected to (A) Cold working (B) Annealing (C) Shot blasting (D) Heating
Description : Cold worked steel parts are normally subjected to (A) Normalising (B) Hardening (C) Annealing (D) Shot peening
Last Answer : (C) Annealing
Description : Pick out the wrong statement. (A) Both annealing and normalising release the internal stresses of the material besides improving the mechanical properties (B) Low carbon steel does not respond to ... are also used for surface hardening (D) Martempering of a material is a hardening process
Description : Elimination of brittleness resulting from welding of saw blades is done by __________ of the welded portion. (A) Annealing (B) Toughening (C) Work hardening (D) Tempering
Last Answer : (A) Annealing
Description : High speed cutting tool steels contain about __________ percent of tungsten. (A) 6-8 (B) 18-20 (C) 30-35 (D) 50-55
Last Answer : (B) 18-20
Description : Principal alloying elements of cast tool alloys which have very high wear resistance & high temperature strength are (A) Cobalt, chromium & tungsten (B) Cobalt, chromium & nickel (C) Molybdenum, tungsten & chromium (D) Cobalt, zirconium & molybdenum
Last Answer : : Option A
Description : Tempering of steel is done to make it (A) Brittle (B) Hard (C) Rollable (D) Soft
Last Answer : (D) Soft
Description : Case hardening of a material is (A) Followed by tempering or carburising (B) Preceded by its tempering (C) Done to get a soft ductile interior with a very hard surface (D) Carried out to get extreme hardness in its core
Last Answer : (D) Carried out to get extreme hardness in its core
Description : Non-ferrous metals and hard steels do not exhibit a definite yield point, when pulled in the testing machine and hence for these cases, a better measure of their elastic properties is defined by the __________ stress. (A) Ultimate (B) Yield point (C) Proof (D) None of these
Last Answer : (C) Proof
Description : Addition of nickel to copper improves its (A) Machinability (B) Ductility (C) Strength (D) Hardness
Last Answer : (D) Hardness
Description : Addition of lead, sulphur and phosphorus to low carbon steel helps in improving its (A) Corrosion resistance (B) Tensile strength (C) Machinability (D) Compressive strength
Last Answer : (C) Machinability
Description : Notched bar test is used for testing the __________ of a material. (A) Impact strength (B) Endurance limit (C) Machinability (D) Corrosion resistance
Last Answer : (A) Impact strength
Description : Lead is added to 60:40 brass primarily to improve (A) Machinability (B) Corrosion resistance (C) Fluidity (D) Strength
Last Answer : (A) Machinability
Description : Addition of __________ to steel does not help in improving its machinability. (A) Sulphur (B) Silicon (C) Lead (D) Phosphorous
Last Answer : (B) Silicon
Description : Plastics as a material of construction suffer from the drawback of low (A) Machinability (B) Density (C) Strength (D) Plastic deformatio
Description : Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical
Description : For hard facing base alloys used are a) high carbon steel b) high carbon iron c) carbon steel d) stainless steel
Last Answer : b) high carbon iron
Description : What sort of alloys do you use for bridges: A. Ductile B. Hard C. High sensitivity
Last Answer : B. Hard
Description : .In regard to Gold casting alloys which one is available for bridge A. Hard alloy “Type IV B. Type II
Last Answer : A. Hard alloy “Type IV
Description : When the steel is subjected to normalising, its __________ decreases. (A) Yield point (B) Ductility (C) Ultimate tensile strength (UTS)
Last Answer : (B) Ductility
Description : Normalising of a casting does not (A) Induce stresses in it (B) Refine its grain structure (C) Reduce segregation (D) Improve its mechanical properties
Last Answer : (A) Induce stresses in it
Description : Normalising of an object does not (A) Refine coarse grain structure obtained during hot working (B) Improve ductility (C) Improve yield strength (D) Improve mechanical properties
Last Answer : (B) Improve ductility
Description : The process of coating steel sheets by zinc to improve its corrosion resistance is called (A) Calorising (B) Galvanising (C) Zincification (D) Tempering
Last Answer : (B) Galvanising
Description : Which of the following processes follows the hardening process for reducing the hardening strains & increasing the toughness of the steel part? (A) Anodising (B) Tempering (C) Carburising
Description : What is the range of tempering temperature (°C) for most of the materials? (A) 75-100 (B) 200-300 (C) 350-450 (D) 500-600
Last Answer : (B) 200-300
Description : Corrosion of metals cannot be prevented by its (A) Tempering (B) Chromising (C) Aluminising (D) Alloying
Last Answer : (A) Tempering
Description : __________ of grey cast iron produces white cast iron. (A) Tempering (B) Rapid heating (C) Rapid cooling (D) Slow cooling
Description : Which of the following are problems with the current rapid prototyping and additivemanufacturing technologies? a.Limited material variety b.Inability to convert a solid part into layers c.Poor machinability of the starting material d.The inability of the designer to design the part
Last Answer : a.Limited material variety
Description : Which of the following is (are) true? (A) Cast iron has poor tensile strength compared to steel (B) Failure of cast iron flywheel is sudden and total (C) Machinability of cast iron flywheel is poor compared to steel flywheel (D) All of the above
Last Answer : (D) All of the above
Description : Define: i)Tensile strength ii) Machinability
Last Answer : i) Tensile strength: It is the ability or capacity of a metal to carry the load without breaking. Or A tensile strength of a metal is its ability to resist pull without breaking. ii) Machinability: ... can be easily cut by cutting tools to produce a desired shape & surface finish on its surface.