Vernier calipers cannot be used to measure the (A) I.D. & O.D. of the shaft (B) Thickness of parts (C) Depth of holes (D) Clearance between two mating surfaces

Vernier calipers cannot be used to measure the
(A) I.D. & O.D. of the shaft
(B) Thickness of parts
(C) Depth of holes
(D) Clearance between two mating surfaces
by

1 Answer

Answer :

Option D
by

Related questions

Before reassembling any machinery, you should _____________. A. replace all bearings regardless of length of service B. apply a heavy coat of oil to all mating surfaces C. clean any corroded surfaces and file all burrs smooth D. coat all parts with alemite grease

Description : Before reassembling any machinery, you should _____________. A. replace all bearings regardless of length of service B. apply a heavy coat of oil to all mating surfaces C. clean any corroded surfaces and file all burrs smooth D. coat all parts with alemite grease

Last Answer : Answer: C

Which tool is not for making holes awl punch auger or calipers?

Description : Which tool is not for making holes awl punch auger or calipers?

Last Answer : Calipers are used for measuring small thicknesses and widths,not making holes."Outside calipers" look like tongs and could stab throughlightweight material, but that is not the primary function.

For elasto-hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to supply lubricant under pressure (C) There should be elastic deformation of the parts in contact (D) There should be metal to metal contact

Description : For elasto-hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (C) There should be elastic deformation of the parts in contact

For hydrostatic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to supply lubricant under pressure (C) There should be elastic deformation of the parts in contact (D) There should be metal to metal contact

Description : For hydrostatic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (B) There should be external source like pump to supply lubricant under pressure

For hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to supply lubricant under pressure (C) There should be elastic deformation of the parts in contact (D) There should be metal to metal contact

Description : For hydrodynamic lubrication (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space (B) There should be external source like pump to ... be elastic deformation of the parts in contact (D) There should be metal to metal contact

Last Answer : (A) There should be relative motion between the surfaces of the journal and the bearing and wedge shaped clearance space

How do you use calipers to measure body fat?

Description : How do you use calipers to measure body fat?

Last Answer : Take caliper measurements in any order from: the back of the arm, the front of the arm, the waist, and the shoulder blade. Add up the numbers and use the chart in the link to find the percent body fat. http://www.muscleandstrength.com/tools/how-to-measure-bodyfat-using-calipers.htmld

Choose the most important factor on which the heat conducted through a wall in a unit time will depend on? (A) Thickness of the wall (B) Area of the wall perpendicular to heat flow (C) Material of the wall (D) Temperature difference between the two surfaces of the wall

Description : Choose the most important factor on which the heat conducted through a wall in a unit time will depend on? (A) Thickness of the wall (B) Area of the wall perpendicular to heat flow (C) Material of the wall (D) Temperature difference between the two surfaces of the wall

Last Answer : (D) Temperature difference between the two surfaces of the wall

The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Description : The drying time between fixed moisture contents within the 'constant rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 1.5 (D) T

Last Answer : (B) T

The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Description : The drying time between fixed moisture content within diffusion controlled 'falling rate period' is proportional to (assuming that drying occurs from all surfaces of the solid) (where, T = thickness of the solid). (A) √T (B) T (C) T 2 (D) T

Last Answer : (C) T

Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The clearance between the tank bottom and the bottom most impeller should be about (where, D = impeller diameter) (A) 0.5 D (B) D (C) 1.5 D (D) 2 D

Description : Height of liquid in agitation tank is normally maintained equal to the tank diameter. However, if the tank is too tall and a large liquid hold up is desired, then two or more impellers mounted on the same shaft may be used. The ... where, D = impeller diameter) (A) 0.5 D (B) D (C) 1.5 D (D) 2 D

Last Answer : (B) D

A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a time factor 0.20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Description : A structure is erected on an impervious clay whose thickness is 12 m. Drainage is possible both at upper and lower surfaces. Coefficient of consolidation is 0.015 cm2 per minute. For attaining 50% consolidation with a ... 20, the number of days required (A) 3233 (B) 3123 (C) 33331 (D) 3313

Last Answer : Answer: Option C

Answer the following S. No Statement Chose the correct answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the blanks 3 Non Contact Infrared Thermometer cannot measure temperature of objects placed in hazardous places True/False 4 To measure the RPM of a Flywheel, ______ type of RPM meter is used and for a visible shaft-end _______ type of RPM meter is used. Fill in the blanks 5 In a switch yard, _____ instrument is used to identify the loose joints and terminations Fill in the blanks 6 Every Designated Consumer shall have its first energy audit conducted by ________ Energy Auditor within ______ months of

Description :  Answer the following S. No Statement Chose the correct  answer OR Fill-in-the-blanks 1 Fyrite measures CO2, O2 and SO2 True/False 2 Ultrasonic Flow Meter uses the principle of____& ____ Fill in the ... of RPM  meter is used and for a visible shaft-end _______ type of  RPM meter is used.

Last Answer : Sr  No Statement Chose the correct  answer OR Fill-in-the-blanks Solution 1 Fyrite measures CO2, O2 and  SO2 True/False False 2 Ultrasonic Flow Meter uses the  principle of____& ____ ... ]  10 In a gasification system the  reduction zone is above the  combustion zone True/False False

CV joints and failing calipers?

Description : CV joints and failing calipers?

Last Answer : The oil leaking out of the CV boot is probably causing the brakes to not grip as they normally would.

What makes calipers go bad on a truck?

Description : What makes calipers go bad on a truck?

Last Answer : Brake calipers? Is this a smog inspection?

What is Slide Calipers ?

Description : What is Slide Calipers ?

Last Answer : An instrument used to measure the diameter of a cylinder is called a slide caliper.

Are body fat calipers reliable or accurate?

Description : Are body fat calipers reliable or accurate?

Last Answer : Body fat calipers are a useful tool. There are many models on the market today. Be sure to carefully read any instructions that come with the tool so that you will know the correct way to use ... correctly these are a reliable and accurate way to measure body fat on certain areas of the body.

How time consuming is it to install new break calipers?

Description : How time consuming is it to install new break calipers?

Last Answer : With experience, a mechanic can replace break calipers in around an hour. It generally costs $100 for each new caliper, however this may differ at repair shops near you.

A full journal bearing having clearance to radius ratio of 1/100, using a lubricant with μ=28×10-3 Pa s supports the shaft journal running at N = 2400 rpm If bearing pressure is 1.4 MPa, the Somerfield number is [IES-2001] (a) 8×10-3 (b) 8×10-5 (c) 0.48 (d) 0.48×10

Description : A full journal bearing having clearance to radius ratio of 1/100, using a lubricant with μ=28×10-3 Pa s supports the shaft journal running at N = 2400 rpm If bearing pressure is 1.4 MPa, the Somerfield number is [IES-2001] (a) 8×10-3 (b) 8×10-5 (c) 0.48 (d) 0.48×10

Last Answer : (a) S = (μN s /p) (r/c) 2

Increase in values of which of the following results in an increase of the coefficient of friction in a hydrodynamic bearing? [IES 2007] 1. Viscosity of the oil. 2. Clearance between shaft and bearing. 3. Shaft speed. Select the using the code given below: (a) 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Description : Increase in values of which of the following results in an increase of the coefficient of friction in a hydrodynamic bearing? [IES 2007] 1. Viscosity of the oil. 2. Clearance between shaft and bearing. 3. Shaft speed. Select the ... 1 and 2 only (b) 1 and 3 only (c) 2 and 3 only (d) 1, 2 and 3

Last Answer : (b) 1 and 3 only

Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the tip diameter should be equal to t (where, t = plate thickness to be welded) (C) In spot welding, two pieces to be joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded

Last Answer : (D) Mild steel sheet cannot be spot welded

When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction of all wall is similar for best retention B. No, proximal reduction is greater to allow the crown to pass the contact area C. No, the buccal surfaces has the greatest reduction to remove the cervical bulge D. Yes, all undercuts are uniformly removed so that the steel crown can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Description : When primary molars are prepared for stainless steel crowns, should the depth for reduction of the proximal surface be similar to the depth of the buccal and lingual surfaces? A. Yes; reduction ... can be seated E. No, because of lateral constriction, the lingual surface needs greatest reduction

Last Answer : B. No, proximal reduction is greater to allow the crown to pass the contact area

Evaporation from water surfaces exposed to air is not dependent of the: w) velocity of the wind x) humidity y) temperature z) depth of the water

Description : Evaporation from water surfaces exposed to air is not dependent of the: w) velocity of the wind x) humidity y) temperature z) depth of the water 

Last Answer : ANSWER: Z -- DEPTH OF THE WATER 

What is the spherical boundary of zero thickness in which photons that move around black holes called? -Space

Description : What is the spherical boundary of zero thickness in which photons that move around black holes called? -Space

Last Answer : A photon sphere or photon circle is an area or region of space where gravity is so strong that photons are forced to travel in orbits. (It is sometimes called the last photon orbit.) The radius of ... sphere, which is also the lower bound for any stable orbit, is, for a Schwarzschild black hole:

The cooling effect in a cooling tower cannot be increased by (A) Increasing the air velocity over the wet surfaces (B) Reducing the humidity of entering air (C) Lowering the barometric pressure (D) None of these

Description : The cooling effect in a cooling tower cannot be increased by (A) Increasing the air velocity over the wet surfaces (B) Reducing the humidity of entering air (C) Lowering the barometric pressure (D) None of these

Last Answer : (D) None of these

Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be shaped to properly located rigid parts of framework C. Areas used for guideline planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Description : Which of the following areas CANNOT be determined by survey analysis of partially edentulous cast? A. Areas to be revealed as blocked out to properly located rigid parts of a frame work B. Areas to be ... planes D. Areas used for retention E. Areas used for support F. Depth of rest seats

Last Answer : F. Depth of rest seats

For the same dimensions of the shaft which of the following has the greater natural frequency? A. Transverse B. Longitudinal C. Depends on thickness D. Depends upon length

Description : For the same dimensions of the shaft which of the following has the greater natural frequency? A. Transverse B. Longitudinal C. Depends on thickness D. Depends upon length

Last Answer : B. Longitudinal

For the same dimensions of the shaft which of the following has the greater natural frequency? (A) Transverse (B) Longitudinal (C) Depends on thickness (D) Depends upon length

Description : For the same dimensions of the shaft which of the following has the greater natural frequency? (A) Transverse (B) Longitudinal (C) Depends on thickness (D) Depends upon length

Last Answer : (B) Longitudinal

For the same dimensions of the shaft which of the following has the greater natural frequency? a) Transverse b) Longitudinal c) Depends on thickness d) Depends upon length

Description : For the same dimensions of the shaft which of the following has the greater natural frequency? a) Transverse b) Longitudinal c) Depends on thickness d) Depends upon length

Last Answer : b) Longitudinal

the oil, N = Speed of the shaft, R = Radius of the shaft, and t = Thickness of the oil film) (A) 60t (B) 60t (C) 60t (D) 60t

Description : the oil, N = Speed of the shaft, R = Radius of the shaft, and t = Thickness of the oil film) (A) 60t (B) 60t (C) 60t (D) 60t

Last Answer : Answer: Option D

A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Description : A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Last Answer : (c) outer surface of shaft

Maximum shear stress in a hollow shaft subjected to a torsional moment is at the a. Middle of thickness. b. At the inner surface of the shaft. c. At the outer surface of the shaft. d. At the middle surface of the shaft.

Description : Maximum shear stress in a hollow shaft subjected to a torsional moment is at the a. Middle of thickness. b. At the inner surface of the shaft. c. At the outer surface of the shaft. d. At the middle surface of the shaft.

Last Answer : c. At the outer surface of the shaft.

.For an onlay preparation, which of the following is the MOST EFFECTIVE means for verifying adequate occlusal clearance A. Wax bite chew in B. Proper depth cuts C. Visual inspection D. Articulating paper

Description : .For an onlay preparation, which of the following is the MOST EFFECTIVE means for verifying adequate occlusal clearance A. Wax bite chew in B. Proper depth cuts C. Visual inspection D. Articulating paper

Last Answer : A. Wax bite chew in

Which of the following statements, concerning the general maintenance of a brushless generator, is correct? A. Paint should be applied to insulating surfaces on an annual basis. B. Alcohol should be used to remove dust and grime from windings. C. High pressure air should be used to blow out carbon dust. D. Accessible generator parts should be wiped with a clean dry rag on a periodic basis.

Description : Which of the following statements, concerning the general maintenance of a brushless generator, is correct? A. Paint should be applied to insulating surfaces on an annual basis. B. Alcohol should be used to ... . D. Accessible generator parts should be wiped with a clean dry rag on a periodic basis.

Last Answer : Answer: D

Which of the following statements is true concerning the cleaning of electrical contacts? A. Compressed air should be used to blow out metallic dust. B. Magnetic brushes should be used to remove metallic dust. C. The contact surfaces should be greased to increase contact resistance. D. Delicate parts should be cleaned with a brush and an approved safety solvent.

Description : Which of the following statements is true concerning the cleaning of electrical contacts? A. Compressed air should be used to blow out metallic dust. B. Magnetic brushes should be used to remove ... contact resistance. D. Delicate parts should be cleaned with a brush and an approved safety solvent.

Last Answer : Answer: D

A thick film bearing is a bearing (A) Where the surfaces of journal and the bearing are completely separated by a film of lubricant (B) Where the surfaces of journal and the bearing are partially separated by a film of lubricant and there is partial metal to metal contact (C) Where the surfaces of journal and the bearing are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Description : A thick film bearing is a bearing (A) Where the surfaces of journal and the bearing are completely separated by a film of lubricant (B) Where the surfaces of journal and the bearing are partially ... are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Last Answer : (A) Where the surfaces of journal and the bearing are completely separated by a film of lubricant

A thin film bearing is a bearing (A) Where the surfaces of journal and the bearing are completely separated by a film of lubricant (B) Where the surfaces of journal and the bearing are partially separated by a film of lubricant and there is partial metal to metal contact (C) Where the surfaces of journal and the bearing are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Description : A thin film bearing is a bearing (A) Where the surfaces of journal and the bearing are completely separated by a film of lubricant (B) Where the surfaces of journal and the bearing are partially ... are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Last Answer : (B) Where the surfaces of journal and the bearing are partially separated by a film of lubricant and there is partial metal to metal contact

A zero film bearing is a bearing (A) Where the surfaces of journal and the bearing are separated by a thick film of lubricant (B) Where the surfaces of journal and the bearing are partially separated by a film of lubricant and there is partial metal to metal contact (C) Where the surfaces of journal and the bearing are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Description : A zero film bearing is a bearing (A) Where the surfaces of journal and the bearing are separated by a thick film of lubricant (B) Where the surfaces of journal and the bearing are partially ... bearing are separated by a film created by elastic deflection of parts (D) Where there is no lubricant

Last Answer : (D) Where there is no lubricant

Which of the following is a measure of the agglutinating (i.e., binding) property of coal? (A) Thickness of plastic layer (B) Caking index (C) Swelling index (D) Gray-king index

Description : Which of the following is a measure of the agglutinating (i.e., binding) property of coal? (A) Thickness of plastic layer (B) Caking index (C) Swelling index (D) Gray-king index

Last Answer : (B) Caking index

Schedule number of a pipe, which is a measure of its wall thickness, is given by (A) 1000 P'/S (B) 100 P'/S (C) 1000 S/P' (D) 10000 P'/S

Description : Schedule number of a pipe, which is a measure of its wall thickness, is given by (A) 1000 P'/S (B) 100 P'/S (C) 1000 S/P' (D) 10000 P'/S

Last Answer : (A) 1000 P'/S

The effective span of a simply supported slab, is (A) Distance between the centres of the bearings (B) Clear distance between the inner faces of the walls plus twice the thickness of the wall (C) Clear span plus effective depth of the slab (D) None of these

Description : The effective span of a simply supported slab, is (A) Distance between the centres of the bearings (B) Clear distance between the inner faces of the walls plus twice the thickness of the wall (C) Clear span plus effective depth of the slab (D) None of these

Last Answer : Answer: Option B

The main factor which affects the infiltration capacity, is (A) Thickness of saturated layer (B) Depth of surface detention (C) Soil moisture (D) All the above

Description : The main factor which affects the infiltration capacity, is (A) Thickness of saturated layer (B) Depth of surface detention (C) Soil moisture (D) All the above

Last Answer : Answer: Option D

A new biosynthetic dressing used , is used to treat?in the treatment of burns, TransCyte a) burns of indeterminate depth is used to treat burns in which the depth is?TransCyte indeterminate or between superficial and deep partial thickness in depth.

Description : A new biosynthetic dressing used , is used to treat?in the treatment of burns, TransCyte a) burns of indeterminate depth is used to treat burns in which the depth is?TransCyte ... a temporary biosynthetic wound?BCG Matrix covering intended for use with partial-thickness burns and donor sites

Last Answer : a) burns of indeterminate depth is used to treat burns in which the depth is?TransCyte indeterminate or between superficial and deep partial thickness in depth.

When the emergency nurse learns that the patient suffered injury from a flash flame, the nurse anticipates which depth of burn? a) Deep partial thickness A deep partial thickness burn is similar to a second-degree burn and is associated with scalds and flash flames.

Description : When the emergency nurse learns that the patient suffered injury from a flash flame, the nurse anticipates which depth of burn? a) Deep partial thickness A deep partial thickness burn is similar to a ... Injury from a flash flame is not associated with a burn that is limited to the epidermis.

Last Answer : a) Deep partial thickness A deep partial thickness burn is similar to a second-degree burn and is associated with scalds and flash flames.

If d is the economic designed depth of a slab, the thickness of the cement concrete pavement slab at interior, is kept (A) 1.275 d (B) 1.125 d (C) 0.85 d (D) 0.75 d

Description : If d is the economic designed depth of a slab, the thickness of the cement concrete pavement slab at interior, is kept (A) 1.275 d (B) 1.125 d (C) 0.85 d (D) 0.75 d

Last Answer : Answer: Option C

The effective span of a simply supported slab is (a) Distance between the centers of the bearings (b) Clear distance between the inner faces of the walls plus twice he thickness of the slab. (c) Cleat spa plus effective depth of the slab. (d) All the above

Description : The effective span of a simply supported slab is (a) Distance between the centers of the bearings (b) Clear distance between the inner faces of the walls plus twice he thickness of the slab. (c) Cleat spa plus effective depth of the slab. (d) All the above

Last Answer : (c) Cleat spa plus effective depth of the slab.

In a T-beam, the vertical distance between the bottom of the flange and the centre of the tensile reinforcement is (a) Breadth of flange (b) Thickness of flange (c) Breadth of slab (d) Depth of rib

Description : In a T-beam, the vertical distance between the bottom of the flange and the centre of the tensile reinforcement is (a) Breadth of flange (b) Thickness of flange (c) Breadth of slab (d) Depth of rib

Last Answer : (d) Depth of rib

The portion of the slab which acts monolithically with the beam and which resists the compressive stresses, is called _________of flange of the T-beam (a) Length (b) Breadth (c) Thickness (d) Depth

Description : The portion of the slab which acts monolithically with the beam and which resists the compressive stresses, is called _________of flange of the T-beam (a) Length (b) Breadth (c) Thickness (d) Depth

Last Answer : (b) Breadth

The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall

Description : The wall of a dam is made thicker at the bottom than at the top because the pressure exerted by the water on the wall (1) depends on the thickness of the wall (2) increases with height of the wall (3) increases with depth of the wall (4) depends on the area of the wall

Last Answer :  increases with depth of the wall

It is the process of placing seeds in holes made in the seedbed and closing the seed with soil. In this method, seeds are placed in holes made at definite depth at fixed spacing. b. Drilling c. Broadcasting d. None of the above

Description : It is the process of placing seeds in holes made in the seedbed and closing the seed with soil. In this method, seeds are placed in holes made at definite depth at fixed spacing. b. Drilling c. Broadcasting d. None of the above.

Last Answer : Ans - a. Dibbing

A stone is dropped into a deep shaft without any initial velocity. The sound of the stone hitting the bottom is heard after 4 seconds. If the velocity of sound is 330 m/sec the depth of the shaft will be a.33.1 m b.660 m c.165 m d.66.2 m e.330 m

Description : A stone is dropped into a deep shaft without any initial velocity. The sound of the stone hitting the bottom is heard after 4 seconds. If the velocity of sound is 330 m/sec the depth of the shaft will be a.33.1 m b.660 m c.165 m d.66.2 m e.330 m

Last Answer : d. 66.2 m