In extrusion of metals, which of the following statement is true? (A) Speed of the extruded material is same as that of ram speed (B) Redundant work is a function of the die angle (C) Relative motion between the billet surface and the container wall is always present (D) Hollow ram is used for indirect extrusion

In extrusion of metals, which of the following statement is true? (A) Speed of the extruded material is same as that of ram speed (B) Redundant work is a function of the die angle
(C) Relative motion between the billet surface and the container wall is always present
(D) Hollow ram is used for indirect extrusion
by

1 Answer

Answer :

(D) Hollow ram is used for indirect extrusion
by

Related questions

Differentiate between direct and indirect extrusion. Discuss their relative merits and demerits.

Description : Differentiate between direct and indirect extrusion. Discuss their relative merits and demerits. 

Last Answer : Direct extrusion Indirect extrusion Simple, but the material must slide along the chamber wall. In this case, material does not move but die moves. High friction forces must ... be used for extruding long extrudes. Support of the ram becomes a problem as work length increases.

Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent formation of an “overhang” D. Provide adequate physiological contour for the proximal surface E. Provide an acceptable surface texture to the proximal surface F. All of the above

Description : Function of matrix band: A. Substitute for the missing wall so adequate condensation forces can be applied B. Permit re-establishment of proper contact lines C. Restrict extrusion of amalgam and prevent ... E. Provide an acceptable surface texture to the proximal surface F. All of the above

Last Answer : F. All of the above

Production of a hollow product by inflation of a tube or parison is called the __________ process. (A) Blow moulding (B) Calendaring (C) Extrusion (D) Injection

Description : Production of a hollow product by inflation of a tube or parison is called the __________ process. (A) Blow moulding (B) Calendaring (C) Extrusion (D) Injection

Last Answer : (A) Blow moulding

Collapsible tubes for tooth paste are produced by __________ extrusion. (A) Direct (B) Indirect (C) Impact (D) None of these

Description : Collapsible tubes for tooth paste are produced by __________ extrusion. (A) Direct (B) Indirect (C) Impact (D) None of these

Last Answer : (C) Impact

Fluid is a substance that (A) Cannot be subjected to shear forces (B) Always expands until it fills any container (C) Has the same shear stress at a point regardless of its motion (D) Cannot remain at rest under action of any shear force

Description : Fluid is a substance that (A) Cannot be subjected to shear forces (B) Always expands until it fills any container (C) Has the same shear stress at a point regardless of its motion (D) Cannot remain at rest under action of any shear force

Last Answer : Answer: Option D

Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of the free body c.If static friction is acting, the value of the friction force may vary from zero to its maximum value d.The force of friction is always normal to the surface e.All of the above

Description : Which one of the following is not the law of dry friction? a.If friction is neglected, the reactions are always normal to the surfaces on contact b.Friction always acts to oppose the relative motion of ... its maximum value d.The force of friction is always normal to the surface e.All of the above

Last Answer : d. The force of friction is always normal to the surface

Thermosetting polymers are (A) Injection moulded (B) Cast molded (C) Extruded (D) None of these

Description : Thermosetting polymers are (A) Injection moulded (B) Cast molded (C) Extruded (D) None of these

Last Answer : (B) Cast molded

For same weight, same material, same length a. Solid shaft is always stronger than a hollow shaft b. Solid shaft is always weaker than a hollow shaft and strength ratio will depend upon Do/Di of hollow shaft c. Strength of both the shafts in equal d. Strength of a solid shaft is always weaker and the strength ratio will depend upon Do/Di of hollow shaft

Description : For same weight, same material, same length a. Solid shaft is always stronger than a hollow shaft b. Solid shaft is always weaker than a hollow shaft and strength ratio will depend upon Do/Di of ... of a solid shaft is always weaker and the strength ratio will depend upon Do/Di of hollow shaft

Last Answer : b. Solid shaft is always weaker than a hollow shaft and strength ratio will depend upon Do/Di of hollow shaft

Air preheater is not used as a waste heat recovery system in a____. a) Boiler b) billet Reheating Furnace c) Heat treatment furnace d) compressor

Description : Air preheater is not used as a waste heat recovery system in a____. a) Boiler b) billet Reheating Furnace c) Heat treatment furnace d) compressor

Last Answer : compressor

Recuperated is used mainly as a waste heat recovery system in a ____. a) Boiler b) Billet Reheating Furnace c) Compressor d) None of the above

Description : Recuperated is used mainly as a waste heat recovery system in a ____. a) Boiler b) Billet Reheating Furnace c) Compressor d) None of the above

Last Answer : Billet Reheating Furnace

A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Description : A hollow prismatic beam of circular section is subjected to a torsional moment. The maximum shear stress occurs at (a) inner wall of cross section (b) middle of thickness (c) outer surface of shaft (d) none of these

Last Answer : (c) outer surface of shaft

what are extruded plastics

Description : what are extruded plastics

Last Answer : Need Answer

What safety precaution should you take when working with extruded polytetrafluoroethylene insulated wiring?

Description : What safety precaution should you take when working with extruded polytetrafluoroethylene insulated wiring?

Last Answer : Avoid breathing the vapors when the insulation is heated.

In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel

Description : In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel

Last Answer : (C) High speed steel

Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A process is irreversible as long as Δ S for the system is greater than zero (C) The mechanical work done by a system is always equal to∫P.dV (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Description : Pick out the correct statement. (A) If an insoluble gas is passed through a volatile liquid placed in a perfectly insulated container, the temperature of the liquid will increase (B) A ... compound is defined as the heat of reaction leading to the formation of the compound from its reactants

Last Answer : (D) The heat of formation of a compound is defined as the heat of reaction leading to the formation of the compound from its reactants

The angle of contact in case of a liquid depends upon (A) The nature of the liquid and the solid (B) The material which exists above the free surface of the liquid (C) Both of die above (D) Any one of the above

Description : The angle of contact in case of a liquid depends upon (A) The nature of the liquid and the solid (B) The material which exists above the free surface of the liquid (C) Both of die above (D) Any one of the above

Last Answer : Answer: Option C

A hollow sphere and a solid sphere of the same material and equal radii are heated to the same temperature. In this case, (A) The cooling rate will be the same for the two spheres and hence the two spheres will have equal temperatures at any instant (B) Both the spheres will emit equal amount of radiation per unit time in the beginning (C) Both will absorb equal amount of radiation from the surrounding in the beginning (D) Both (B) & (C)

Description : A hollow sphere and a solid sphere of the same material and equal radii are heated to the same temperature. In this case, (A) The cooling rate will be the same for the two spheres and hence the ... equal amount of radiation from the surrounding in the beginning (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Which of the following instruction perform as of indirect RAM to accumulator? a) MOV A, Rn b) MOV @Ri, A c) MOV A, @Ri d) MOV Rn, A

Description : Which of the following instruction perform as of indirect RAM to accumulator? a) MOV A, Rn b) MOV @Ri, A c) MOV A, @Ri d) MOV Rn, A

Last Answer : c) MOV A, @Ri

Which of the following statement(s) is/are true concerning CO2 transfer in the lung? a. Carbon dioxide excretion is a direct function of alveolar ventilation b. Normally end tidal CO2 should be identical to PaCO2 c. The gradient between end tidal and arterial CO2 can be an indirect measure of nonperfused alveoli d. Positive pressure ventilation under normal airway pressures creates a significant end tidal PaCO2 gradient

Description : Which of the following statement(s) is/are true concerning CO2 transfer in the lung? a. Carbon dioxide excretion is a direct function of alveolar ventilation b. Normally end tidal ... d. Positive pressure ventilation under normal airway pressures creates a significant end tidal PaCO2 gradient

Last Answer : Answer: a, b, c The amount of carbon dioxide excretion is directly related to alveolar ventilation. While oxygenation is a function of matching blood flow to alveoli, carbon dioxide excretion is ... high (over 30 cm H2O) and the compression volume is a significant component of each exhaled breath

59. Alternative solutions exist of an LP model when a. One of the constraints is redundant b. Objective function equation is parallel to one of the constraints c. Two constraints are parallel d. All of the above

Description : 59. Alternative solutions exist of an LP model when a. One of the constraints is redundant b. Objective function equation is parallel to one of the constraints c. Two constraints are parallel d. All of the above

Last Answer : b. Objective function equation is parallel to one of the constraints

Which statement is true relative to changing angle of attack? a. A decrease in angle of attack will increase pressure below the wing and decrease drag b. An increase in angle of attack will decrease pressure below the wing and decrease drag c. An increase in angle of attack will increase drag d. An increase in angle of attack will decrease the lift coefficient

Description : Which statement is true relative to changing angle of attack? a. A decrease in angle of attack will increase pressure below the wing and decrease drag b. An increase in angle of attack will ... of attack will increase drag d. An increase in angle of attack will decrease the lift coefficient

Last Answer : c. An increase in angle of attack will increase drag

Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Description : Coulomb friction is a.Friction between solids and liquids b.Friction between electrically charged bodies c.Friction between lubricated surface d.Friction between dry surfaces e.Friction between bodies having relative motion

Last Answer : d. Friction between dry surfaces

For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Description : For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Last Answer : (D) Both (A) and (C) hold good

Splines are used if, (A) The power to be transmitted is high (B) The torque to be transmitted is high (C) The speed is high (D) There is relative motion between shaft and hub

Description : Splines are used if, (A) The power to be transmitted is high (B) The torque to be transmitted is high (C) The speed is high (D) There is relative motion between shaft and hub

Last Answer : (D) There is relative motion between shaft and hub

The normal stress is the same in all directions at a point in a fluid, when the fluid is (A) Non-viscous (B) Incompressible (C) Both (A) and (B) (D) Having no motion of one fluid layer relative to the other

Description : The normal stress is the same in all directions at a point in a fluid, when the fluid is (A) Non-viscous (B) Incompressible (C) Both (A) and (B) (D) Having no motion of one fluid layer relative to the other

Last Answer : (D) Having no motion of one fluid layer relative to the other

The pressure intensity is the same in all directions at a point in a fluid (A) Only when the fluid is frictionless (B) Only when the fluid is at rest having zero velocity (C) When there is no motion of one fluid layer relative to an adjacent layer (D) Regardless of the motion of one fluid layer relative to an adjacent layer

Description : The pressure intensity is the same in all directions at a point in a fluid (A) Only when the fluid is frictionless (B) Only when the fluid is at rest having zero velocity (C) When there is ... relative to an adjacent layer (D) Regardless of the motion of one fluid layer relative to an adjacent layer

Last Answer : C) When there is no motion of one fluid layer relative to an adjacent layer

The normal stress is the same in all directions at a point in a fluid, only when the fluid (A) Is at rest & has zero viscosity (B) Is frictionless (C) Fluid layer has no motion relative to an adjacent layer of fluid (D) is incompressible & frictionless

Description : The normal stress is the same in all directions at a point in a fluid, only when the fluid (A) Is at rest & has zero viscosity (B) Is frictionless (C) Fluid layer has no motion relative to an adjacent layer of fluid (D) is incompressible & frictionless

Last Answer : (D) is incompressible & frictionless

Which of the following statements is true for Branch-and-Bound search? (A) Underestimates of remaining distance may cause deviation from optimal path. (B) Overestimates can’t cause right path to be overlooked. (C) Dynamic programming principle can be used to discard redundant partial paths. (D) All of the above

Description : Which of the following statements is true for Branch-and-Bound search? (A) Underestimates of remaining distance may cause deviation from optimal path. (B) Overestimates can't cause right path to be ... Dynamic programming principle can be used to discard redundant partial paths. (D) All of the above

Last Answer : (C) Dynamic programming principle can be used to discard redundant partial paths.

Which of the following statements are true for the Phylum Chordata? (A) In Urochordata, notochord extends from head to tail and it is present throughout their life. (B) In Vertebrata, notochord is present during the embryonic period only. (C) Central nervous system is dorsal and hollow. (D) Chordata is divided into 3 subphyla : Hemichordata, Tunicata and Cephalochordata. (a) (D) and (C) (b) (C) and (A) (c) (A) and (B) (d) (B) and (C)

Description : Which of the following statements are true for the Phylum Chordata? (A) In Urochordata, notochord extends from head to tail and it is present throughout their life. (B) In Vertebrata, notochord is present during the embryonic period only. (C ... (C) (b) (C) and (A) (c) (A) and (B) (d) (B) and (C)

Last Answer : (d) (B) and (C)

For the same material, length and given torque, a hollow shaft weighs……………… a solid shaft. (a) Less than (b) More than (c) Equal to (d) None of these

Description : For the same material, length and given torque, a hollow shaft weighs……………… a solid shaft. (a) Less than (b) More than (c) Equal to (d) None of these

Last Answer : (a) Less than

The strength of a hollow shaft is ……… for the same length, material and weight of a solid shaft. (a) More (b) Less (c) Equal (d) None of these

Description : The strength of a hollow shaft is ……… for the same length, material and weight of a solid shaft. (a) More (b) Less (c) Equal (d) None of these

Last Answer : (b) Less

For same length, same material, same length a. Weight of solid shaft is less than weight of hollow shaft b. Weight of solid shaft is more than weight of hollow shaft c. Weight of hollow and solid shafts will be same d. Sometime more sometime less

Description : For same length, same material, same length a. Weight of solid shaft is less than weight of hollow shaft b. Weight of solid shaft is more than weight of hollow shaft c. Weight of hollow and solid shafts will be same d. Sometime more sometime less

Last Answer : b. Weight of solid shaft is more than weight of hollow shaft

The strength of a hollow shaft for the same length, material and weight is ---------- a solid shaft. a. less than. b. more than. c. equal to. d. not equal to.

Description : The strength of a hollow shaft for the same length, material and weight is ---------- a solid shaft. a. less than. b. more than. c. equal to. d. not equal to.

Last Answer : b. more than.

The ratio of strength of a hollow shaft to that of a solid shaft subjected to torsion if both are of the same material and of the same outer diameters, the inner diameter of hollow shaft being half of the outer diameter is a. 15/16 b. 16/15 c. 7/8 d. 8/7

Description : The ratio of strength of a hollow shaft to that of a solid shaft subjected to torsion if both are of the same material and of the same outer diameters, the inner diameter of hollow shaft being half of the outer diameter is a. 15/16 b. 16/15 c. 7/8 d. 8/7

Last Answer : a. 15/16

A solid shaft of same cross sectional area and of same material as that of a hollow shaft can resist a. Less torque. b. More torque. c. Equal torque. d. Unequal torque.

Description : A solid shaft of same cross sectional area and of same material as that of a hollow shaft can resist a. Less torque. b. More torque. c. Equal torque. d. Unequal torque.

Last Answer : a. Less torque.

Which addressing mode is most suitable to change the normal sequence of execution of instructions? A. Immediate B. Indirect C. Relative D. None of the Above

Description : Which addressing mode is most suitable to change the normal sequence of execution of instructions? A. Immediate B. Indirect C. Relative D. None of the Above

Last Answer : C. Relative

The addressing mode which makes use of in-direction pointers is ______ A. Offset addressing mode B. Relative addressing mode C. Indirect addressing mode D. None of the Above

Description : The addressing mode which makes use of in-direction pointers is ______ A. Offset addressing mode B. Relative addressing mode C. Indirect addressing mode D. None of the Above

Last Answer : C. Indirect addressing mode

Which of the following instruction perform jump indirect relative to DPTR a) JMP A+DPTR b) JMP DPTR c) JMP @A+DPTR d) SJMP A+DPTR

Description : Which of the following instruction perform jump indirect relative to DPTR a) JMP A+DPTR b) JMP DPTR c) JMP @A+DPTR d) SJMP A+DPTR

Last Answer : b) JMP DPTR

Which one of the following is not an addressing mode? (A) Register indirect (B) Auto increment (C) Relative indexed (D) Immediate operand

Description : Which one of the following is not an addressing mode? (A) Register indirect (B) Auto increment (C) Relative indexed (D) Immediate operand

Last Answer : (C) Relative indexed

Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. (du/dy) n the value of 'n' for pseudoplastic and Dilatant fluid are < 1 and >1 respectively (C) Shear stress for Newtonian fluid is proportional to the rate of shear in the direction perpendicular to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Description : Pick out the wrong statement. (A) The shear stress at the pipe (dia = D, length = L) wall in case of laminar flow of Newtonian fluids is (D/4L). ∆p (B) In the equation, T. gc = k. ... to motion (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

Last Answer : (D) With increase in the Mach number >0.6, the drag co-efficient decreases in case of compressible fluids

The measurement is made in square metre in case of (A) Cement concrete in foundation (B) R.C.C. structure (C) Hollow concrete block wall (D) None of these

Description : The measurement is made in square metre in case of (A) Cement concrete in foundation (B) R.C.C. structure (C) Hollow concrete block wall (D) None of these

Last Answer : (D) None of these

The width of the hollow space between two walls of a cavity wall should not exceed (A) 5 cm (B) 7.5 cm (C) 10 cm (D) 15

Description : The width of the hollow space between two walls of a cavity wall should not exceed (A) 5 cm (B) 7.5 cm (C) 10 cm (D) 15 cm

Last Answer : Answer: Option C

A short, hollow cast iron cylinder with a wall thickness of 1 cm is to carry a compressive load of 10 tonnes. If the working stress in compression is 800 kg/cm2, the outside diameter of the cylinder should not be less than a) 0.5cm b) 5 cm c) 2.5cm d) 4.5 cm

Description : A short, hollow cast iron cylinder with a wall thickness of 1 cm is to carry a compressive load of 10 tonnes. If the working stress in compression is 800 kg/cm2, the outside diameter of the cylinder should not be less than a) 0.5cm b) 5 cm c) 2.5cm d) 4.5 cm

Last Answer : b) 5 cm

What is the responsibility of an auditor who is engaged to audit the financial statements of a government entity? a. Assess control risk with respect to each component of internal control. b. Assume responsibility for assuring that the entity complies with applicable laws and regulations. c. Obtain an understanding of the possible financial statement effects of laws and regulations having direct and material effects on amounts reported. d. Design the audit to provide reasonable assurance that the statements are free of material misstatements resulting from illegal acts having direct or indirect effects

Description : What is the responsibility of an auditor who is engaged to audit the financial statements of a government entity? a. Assess control risk with respect to each component of internal ... the statements are free of material misstatements resulting from illegal acts having direct or indirect effects

Last Answer : Obtain an understanding of the possible financial statement effects of laws and regulations having direct and material effects on amounts reported.

In geological studies, a fault in the earth's surface in which the hanging wall has moved down relative to the footwall is termed: w) normal fault x) reverse fault y) upthrust fault z) none of these

Description : In geological studies, a fault in the earth's surface in which the hanging wall has moved down relative to the footwall is termed: w) normal fault x) reverse fault y) upthrust fault z) none of these

Last Answer : ANSWER: W -- NORMAL FAULT

In geological studies, a fault in the earth's surface in which the hanging wall has moved UP relative to the footwall is termed: w) overthrust fault x) reverse fault y) tear fault z) none of these

Description : In geological studies, a fault in the earth's surface in which the hanging wall has moved UP relative to the footwall is termed: w) overthrust fault x) reverse fault y) tear fault z) none of these

Last Answer : ANSWER: X -- REVERSE FAULT 

The process involved in converting rubber into a thin sheet or coating it on fabric is called (A) Extrusion (B) Mastication (C) Calendaring (D) Vulcanisation

Description : The process involved in converting rubber into a thin sheet or coating it on fabric is called (A) Extrusion (B) Mastication (C) Calendaring (D) Vulcanisation

Last Answer : (C) Calendaring

__________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion

Description : __________ moulding is used for shaping of thermosetting plastics exclusively. (A) Compression (B) Injection (C) Transfer (D) Extrusion

Last Answer : (C) Transfer

All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Description : All thermoplastic, thermosetting & elastic materials can be processed in a extrusion machine, however it cannot be used for the production of plastic (A) Filaments (B) Pipes (C) Buckets (D) Tubings

Last Answer : (C) Buckets