__________ glass is used in the mercury in glass thermometer meant for measuring a temperature of 500°C. (A) Borosilicate (B) High silica (C) Supermax (D) Lead

__________ glass is used in the mercury in glass thermometer meant for measuring a temperature of 500°C.
(A) Borosilicate
(B) High silica
(C) Supermax
(D) Lead
by

1 Answer

Answer :

(C) Supermax
by

Related questions

Which glass is usually used in optical work? (A) Lead glass (B) High silica (borosilicate) glass (C) Photo-sensitive glass (D) Fibre glass

Description : Which glass is usually used in optical work? (A) Lead glass (B) High silica (borosilicate) glass (C) Photo-sensitive glass (D) Fibre glass

Last Answer : (C) Photo-sensitive glass

Which of the following is resistant to the action of both heat & chemicals? (A) Borosilicate glass (B) Silica glass (C) Soda lime glass (D) None of these

Description : Which of the following is resistant to the action of both heat & chemicals? (A) Borosilicate glass (B) Silica glass (C) Soda lime glass (D) None of these

Last Answer : (A) Borosilicate glass

When troubleshooting a lead-acid storage battery, a weak or dead cell is best detected by _________________. A. measuring and comparing all cells' specific gravity B. taking an open circuit voltage test of individual cells C. visually inspecting the electrolyte levels of each cell D. taking each cell's temperature with a calibrated mercury thermometer

Description : When troubleshooting a lead-acid storage battery, a weak or dead cell is best detected by _________________. A. measuring and comparing all cells' specific gravity B. taking an open circuit ... electrolyte levels of each cell D. taking each cell's temperature with a calibrated mercury thermometer

Last Answer : Answer: A

Type of glass used in optical work is the __________ glass. (A) Soda-lime (B) Fibre (C) Lead (D) Borosilicate

Description : Type of glass used in optical work is the __________ glass. (A) Soda-lime (B) Fibre (C) Lead (D) Borosilicate

Last Answer : (C) Lead

Laboratory glass wares which reacts with hydrofluoric acid, are made of the __________ glass. (A) Lead (B) Borosilicate (C) Soda lime (D) Alkali silicate

Description : Laboratory glass wares which reacts with hydrofluoric acid, are made of the __________ glass. (A) Lead (B) Borosilicate (C) Soda lime (D) Alkali silicate

Last Answer : (B) Borosilicate

When troubleshooting an alkaline storage battery a weak or dead cell is best located by ____________. A. checking the specific gravity of each cell B. visually inspecting each cell's electrolyte level C. testing each cell with a voltmeter D. measuring the electrolyte temperature with an accurate mercury thermometer

Description : When troubleshooting an alkaline storage battery a weak or dead cell is best located by ____________. A. checking the specific gravity of each cell B. visually inspecting each cell's ... testing each cell with a voltmeter D. measuring the electrolyte temperature with an accurate mercury thermometer

Last Answer : Answer: C

Routine maintenance of dry-type transformers should include ____________. A. cleaning the windings, if accessible, with a vacuum cleaner or very low pressure air B. measuring and recording the winding temperature with an accurate mercury thermometer C. periodic cleaning of the winding insulation with an approved solvent D. making sure that the units are close to bulkheads or corners to protect them from damage

Description : Routine maintenance of dry-type transformers should include ____________. A. cleaning the windings, if accessible, with a vacuum cleaner or very low pressure air B. measuring and recording the winding ... . making sure that the units are close to bulkheads or corners to protect them from damage

Last Answer : Answer: A

At what temperature is glass fused to steel in the making of glass-lined equipment? The borosilicate glass is typically fused to carbon steel at a temperature of about 800 0C. 87. What are some typical applications for glass-lined reactors?

Description : At what temperature is glass fused to steel in the making of glass-lined equipment? The borosilicate glass is typically fused to carbon steel at a temperature of about 800 0C. 87. What are some typical applications for glass-lined reactors?

Last Answer : Glass-lined equipment gives superior protection to all mineral acids at all concentration and temperatures. One exception is hydrofluoric acid. They are also used is high-purity processes where cleanliness ... to the walls of the vessels while glass-lined vessels have good anti-stick properties.

__________ glass has the lowest co-efficient of thermal expansion and hence is more heat resistant. (A) Pyrex (B) Soda lime (C) Lead (D) High silica

Description : __________ glass has the lowest co-efficient of thermal expansion and hence is more heat resistant. (A) Pyrex (B) Soda lime (C) Lead (D) High silica

Last Answer : (A) Pyrex

A breakable, mercury-filled thermometer should not be used in a lead-acid battery to measure electrolyte temperature, as an accidental breakage can cause ____________. A. severe sparking and explosions B. rapid oxidation of battery plates C. violent gassing at the positive plates D. corrosion on the battery terminals

Description : A breakable, mercury-filled thermometer should not be used in a lead-acid battery to measure electrolyte temperature, as an accidental breakage can cause ____________. A. severe sparking and explosions ... battery plates C. violent gassing at the positive plates D. corrosion on the battery terminals

Last Answer : Answer: A

Pick out the wrong statement. (A) Hard glass which is used for making laboratory glass wares is a mixture of sodium borosilicate and aluminium borosilicate (B) Glass is decolorized during its manufacture by adding antimony oxide, manganese dioxide or arsenic oxide (C) Ordinary glass is represented chemically by Na2O . CaO . 6SiO2 (D) Red color is imparted to glass by addition of arsenic oxide

Description : Pick out the wrong statement. (A) Hard glass which is used for making laboratory glass wares is a mixture of sodium borosilicate and aluminium borosilicate (B) Glass is decolorized during its manufacture by ... Na2O . CaO . 6SiO2 (D) Red color is imparted to glass by addition of arsenic oxide

Last Answer : (D) Red color is imparted to glass by addition of arsenic oxide

Sodium calcium silicate is called _______. (1) Hard glass (2) Borosilicate glass (3) Soft glass (4) Jena glass

Description : Sodium calcium silicate is called _______. (1) Hard glass (2) Borosilicate glass (3) Soft glass (4) Jena glass

Last Answer : (3) Soft glass Explanation: Ordinary glass which is also known as soda glass or soft glass is a mixture of sodium silicate, Calcium silicate, and Silica.

Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Description : Thermometer bulb & capillary in case of mercury filled pressure spring expansion thermometer is normally made of __________ as mercury does not amalgamate with it. (A) Copper (B) Copper alloys (C) Stainless steel (D) Monel

Last Answer : (C) Stainless steel

Major component of flint glass is (A) Lead oxide (B) Silica (C) Alumina (D) Soda

Description : Major component of flint glass is (A) Lead oxide (B) Silica (C) Alumina (D) Soda

Last Answer : (A) Lead oxide

Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Description : Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Last Answer : (B) 1000°C and 10 atm

What do you think of supermax prisons?

Description : What do you think of supermax prisons?

Last Answer : Bad idea. Counterproductve. Dehumanizing. We are collectively going to pay a heavy price later.

Pressure & temperature maintained in catalytic cracking is about (A) 2 atm & 500°C (B) 10 atm & 500°C (C) 30 atm & 200°C (D) 50 atm & 750°C

Description : Pressure & temperature maintained in catalytic cracking is about (A) 2 atm & 500°C (B) 10 atm & 500°C (C) 30 atm & 200°C (D) 50 atm & 750°C

Last Answer : (A) 2 atm & 500°C

Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil each attaining the bath temperature eventually. The time required for 90% change in temperature is the smallest for (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Description : Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil ... (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Last Answer : (A) Cube

How much temperature is maintained during quicklime manufacture in the calcination zone of the vertical shaft kiln? (A) 500°C (B) 750°C (C) 1000°C (D) 1500°C

Description : How much temperature is maintained during quicklime manufacture in the calcination zone of the vertical shaft kiln? (A) 500°C (B) 750°C (C) 1000°C (D) 1500°C

Last Answer : (C) 1000°C

Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Description : Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Last Answer : (A) 4 kgf/cm2 & 500°C

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

Mercury filled thermometers should never be used to determine the temperature of the battery electrolyte because accidental breakage of the thermometer can cause __________________. A. severe sparking and explosions B. rapid oxidation of battery plates C. contamination of the electrolyte D. corrosion on the battery terminals

Description : Mercury filled thermometers should never be used to determine the temperature of the battery electrolyte because accidental breakage of the thermometer can cause __________________. A. severe sparking and ... of battery plates C. contamination of the electrolyte D. corrosion on the battery terminals

Last Answer : Answer: A

Which of the following devices should be used to measure the temperature of a battery electrolyte? A. Mercury thermometer B. Alcohol thermometer C. Thermocouple pyrometer D. Potentiometer

Description : Which of the following devices should be used to measure the temperature of a battery electrolyte? A. Mercury thermometer B. Alcohol thermometer C. Thermocouple pyrometer D. Potentiometer

Last Answer : Answer: B

Gabriel Daniel Fahrenheit was: A. A German Physicist B. Developed the mercury thermometer in 1714 C. Devised temperature scale D. All are correct

Description : Gabriel Daniel Fahrenheit was: A. A German Physicist B. Developed the mercury thermometer in 1714 C. Devised temperature scale D. All are correct

Last Answer : D. All are correct

The high expansion metal normally used in the bimetallic thermometer is __________ temperature measurement. (A) Brass for low (B) Nickel alloys for high (C) Both 'a' & 'b' (D) Aluminium for all

Description : The high expansion metal normally used in the bimetallic thermometer is __________ temperature measurement. (A) Brass for low (B) Nickel alloys for high (C) Both 'a' & 'b' (D) Aluminium for all

Last Answer : (C) Both 'a' & 'b'

Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia

Description : Rotary kilns in cement industry are lined with _________bricks. (A) Fireclay (B) Silica (C) Lead (D) High alumina & high magnesia

Last Answer : (D) High alumina & high magnesia

How does a glass stem thermometer measure temperature?

Description : How does a glass stem thermometer measure temperature?

Last Answer : What is the answer ?

Iron is not used alone as a catalyst in ammonia synthesis, because (A) Its activity declines rapidly, if heated to above 520°C (B) It decomposes ammonia (C) It gets oxidised above 500°C (D) None of these

Description : Iron is not used alone as a catalyst in ammonia synthesis, because (A) Its activity declines rapidly, if heated to above 520°C (B) It decomposes ammonia (C) It gets oxidised above 500°C (D) None of these

Last Answer : (A) Its activity declines rapidly, if heated to above 520°C

Ethylene oxide is produced by oxidation of ethylene in presence of AgOcatalyst at(A) 1 atm & 100°C(B) 5 atm & 275°C(C) 100 atm & 500°C(D) 50 atm & 1000°C

Description : Ethylene oxide is produced by oxidation of ethylene in presence of AgOcatalyst at (A) 1 atm & 100°C (B) 5 atm & 275°C (C) 100 atm & 500°C (D) 50 atm & 1000°C

Last Answer : (B) 5 atm & 275°C

The value of y = cp/cv. at < 500°C for air & most common gases can be safely assumed to be (A) 0.8 (B) 1 (C) 1.4 (D) 1.8

Description : The value of y = cp/cv. at < 500°C for air & most common gases can be safely assumed to be (A) 0.8 (B) 1 (C) 1.4 (D) 1.8

Last Answer : Option C

Which instrument is used for measuring humidity of atmosphere? (1) Barometer (2) Anemometer (3) Thermometer (4) Hygrometer

Description : Which instrument is used for measuring humidity of atmosphere? (1) Barometer (2) Anemometer (3) Thermometer (4) Hygrometer

Last Answer : 4. Hygrometer Explanation: A hygrometer, also known as a psychrometer, is used to measure the humidity in the air.

Which instrument is used for measuring humidity of atmosphere? (1) Barometer (2) Anemometer (3) Thermometer (4) Hygrometer

Description : Which instrument is used for measuring humidity of atmosphere? (1) Barometer (2) Anemometer (3) Thermometer (4) Hygrometer

Last Answer : Anemometer

In what year and who invented the mercury thermometer ?

Description : In what year and who invented the mercury thermometer ?

Last Answer : In 1814, "Daniel Gabriel" invented the mercury thermometer.

What is the reason for using mercury in thermometer ?

Last Answer : The reason for using mercury in thermometers is that the volume increases with less heat.

The mercury thermometer broke on the pavement of the terrace, I proceeded well and I will be fine?

Description : The balls got between the joints and didn't go out, so I vacuumed them and I'll hand over the bag from the vacuum cleaner and the rest of the thermometer tomorrow. Only at the terrace does the ... terrace is lit. There could be some forgotten bullet there. I have to ventilate. Thanks for the reply.

Last Answer : "Many of us know this from childhood: Someone broke a mercury thermometer and bouncing balls of loose media spread in all directions. Whoever knew about the dangers of toxic fumes, was ... Toxicological Information Center, How to proceed Properly when cleaning mercury from a broken thermometer

Does an instant thermometer used for cooking contain mercury?

Description : Does an instant thermometer used for cooking contain mercury?

Last Answer : No, most instanst thermometers used for cooking are digital and therefore don't contain Mercury. There may be some older style thermometers that do contain mercury.

What is the range of mercury thermometer? (1) 0 degree Celsius to 350 degree Celsius (2) -10 degree Celsius to 350 degree Celsius (3) -20 degree Celsius to 350 degree Celsius (4) -30 degree Celsius to 350 degree Celsius

Description : What is the range of mercury thermometer? (1) 0 degree Celsius to 350 degree Celsius (2) -10 degree Celsius to 350 degree Celsius (3) -20 degree Celsius to 350 degree Celsius (4) -30 degree Celsius to 350 degree Celsius

Last Answer : (4) -30 degree Celsius to 350 degree Celsius

To determine the state of charge of a nickel-cadmium battery, you should ___________. A. check the electrolyte with a hydrometer B. use the constant specific gravity method C. use a nonbreakable mercury thermometer D. connect a voltmeter to the battery terminals

Description : To determine the state of charge of a nickel-cadmium battery, you should ___________. A. check the electrolyte with a hydrometer B. use the constant specific gravity method C. use a nonbreakable mercury thermometer D. connect a voltmeter to the battery terminals

Last Answer : Answer: D

Safety aside, for which of the following reasons is alcohol used in preference to mercury in a minimum thermometer? w) Alcohol has a higher boiling point x) Alcohol has a lower freezing point y) Alcohol contracts more uniformly z) Alcohol can be dyed for visibility

Description : Safety aside, for which of the following reasons is alcohol used in preference to mercury in a minimum thermometer? w) Alcohol has a higher boiling point x) Alcohol has a lower freezing point y) Alcohol contracts more uniformly z) Alcohol can be dyed for visibility

Last Answer : ANSWER: X -- ALCOHOL HAS A LOWER FREEZING POINT

The capillary rise of mercury is maximum in glass tube of dia __________ mm. (A) 0.5 (B) 1 (C) 2 (D) 5

Description : The capillary rise of mercury is maximum in glass tube of dia __________ mm. (A) 0.5 (B) 1 (C) 2 (D) 5

Last Answer : (A) 0.5

A metallic alloy in which one of the constituent metal is __________, is called an amalgam. (A) Zinc (B) Mercury (C) Lead (D) Tin

Description : A metallic alloy in which one of the constituent metal is __________, is called an amalgam. (A) Zinc (B) Mercury (C) Lead (D) Tin

Last Answer : (B) Mercury

Fluorosis is caused due to the presence of excessive amount of __________ in drinking water. (A) Mercury (B) Lead (C) Fluoride (D) Arsenic

Description : Fluorosis is caused due to the presence of excessive amount of __________ in drinking water. (A) Mercury (B) Lead (C) Fluoride (D) Arsenic

Last Answer : (C) Fluoride

The wet bulb temperature is lower in dry air than in wet air at the same temperature. A dry bulb thermometer registers a higher temperature than a wet bulb thermometer except at __________ percent relative humidity. (A) 0 (B) 100 (C) 50 (D) None of these

Description : The wet bulb temperature is lower in dry air than in wet air at the same temperature. A dry bulb thermometer registers a higher temperature than a wet bulb thermometer except at __________ percent relative humidity. (A) 0 (B) 100 (C) 50 (D) None of these

Last Answer : Option B

The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Description : The major constituents of glass are (A) Lime, clay and soda ash (B) Sand, lime and soda ash (C) Silica, alumina and clay (D) Silica, alumina and soda ash

Last Answer : (B) Sand, lime and soda ash

Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Description : Which of the following is not a raw material used for the manufacture of ordinary glass? (A) Iron oxide (B) Soda ash (C) Limestone (D) Silica

Last Answer : (A) Iron oxide

Inhalation of silica dust by human being during hand drilling in mica mining, lead & zinc mining, silica refractory manufacture and in foundries causes (A) Asphyxiation (suffocation) (B) Shortness of breath (C) Tuberculosis (D) All (A), (B) and (C)

Description : Inhalation of silica dust by human being during hand drilling in mica mining, lead & zinc mining, silica refractory manufacture and in foundries causes (A) Asphyxiation (suffocation) (B) Shortness of breath (C) Tuberculosis (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Hardening is a process of heating a metal to a) 400°C b) 500°C c) 600°C d) 700°C

Description : Hardening is a process of heating a metal to a) 400°C b) 500°C c) 600°C d) 700°C

Last Answer : c) 600°C

Anthracene undergoes oxidation with O2/V2O5 at 500°C to give (a) Benzoic acid (b) Anthraquinone (c) Phthalic acid (d) Benzophenone

Description : Anthracene undergoes oxidation with O2/V2O5 at 500°C to give (a) Benzoic acid (b) Anthraquinone (c) Phthalic acid (d) Benzophenone

Last Answer : Anthraquinone

Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Description : Coke oven regenerators are made of __________ bricks. (A) Fire clay (B) Silica (C) Low thermal conductivity (D) High electrical conductivity

Last Answer : (A) Fire clay

Anemometer is an instrument meant for measuring (1) velocity (2) air masses (3) wind speed (4) temperature

Description : Anemometer is an instrument meant for measuring (1) velocity (2) air masses (3) wind speed (4) temperature

Last Answer :  wind speed