Ethylene oxide is produced by oxidation of ethylene in presence of AgOcatalyst at(A) 1 atm & 100°C(B) 5 atm & 275°C(C) 100 atm & 500°C(D) 50 atm & 1000°C

Ethylene oxide is produced by oxidation of ethylene in presence of AgOcatalyst at
(A) 1 atm & 100°C
(B) 5 atm & 275°C
(C) 100 atm & 500°C
(D) 50 atm & 1000°C
by

1 Answer

Answer :

(B) 5 atm & 275°C
by

Related questions

Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Description : Vinyl chloride (CH2 = CH.Cl) is produced by the thermal pyrolysis of ethylene dichloride at a pressure & temperature of (A) 4 kgf/cm2 & 500°C (B) 10 kgf/cm2 & 1000°C (C) 40 kg/cm2 & 200°C (D) 100 kgf/cm2 & 500°C

Last Answer : (A) 4 kgf/cm2 & 500°C

Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Description : Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Last Answer : (B) 1000°C and 10 atm

Pressure & temperature maintained in catalytic cracking is about (A) 2 atm & 500°C (B) 10 atm & 500°C (C) 30 atm & 200°C (D) 50 atm & 750°C

Description : Pressure & temperature maintained in catalytic cracking is about (A) 2 atm & 500°C (B) 10 atm & 500°C (C) 30 atm & 200°C (D) 50 atm & 750°C

Last Answer : (A) 2 atm & 500°C

How much temperature is maintained during quicklime manufacture in the calcination zone of the vertical shaft kiln? (A) 500°C (B) 750°C (C) 1000°C (D) 1500°C

Description : How much temperature is maintained during quicklime manufacture in the calcination zone of the vertical shaft kiln? (A) 500°C (B) 750°C (C) 1000°C (D) 1500°C

Last Answer : (C) 1000°C

The activity of pure hydrogen gas at 1000°C and 5 atm pressure (A) Is always less than 1 (B) Is always greater than 1 (C) Can be 5 (D) Depends on the choice of the standard state

Description : The activity of pure hydrogen gas at 1000°C and 5 atm pressure (A) Is always less than 1 (B) Is always greater than 1 (C) Can be 5 (D) Depends on the choice of the standard state

Last Answer : (D) Depends on the choice of the standard state

Temperature and pressure in ammonia converter is (A) 200 atm, 1000°C (B) 450 atm, 200°C (C) 450 atm, 550°C (D) 450 atm, 1000°C

Description : Temperature and pressure in ammonia converter is (A) 200 atm, 1000°C (B) 450 atm, 200°C (C) 450 atm, 550°C (D) 450 atm, 1000°C

Last Answer : (C) 450 atm, 550°C

Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF, AlCl3 & H2SO4 as Catalysts (C) All the alkylation processes use very high temperature (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Description : Pick out the wrong statement. (A) Alkylation produces a larger iso-paraffin (having higher octane number) from the reaction of an olefin with smaller iso-paraffin (B) Catalytic alkylation processes use HF ... (> 1000°C) (D) Gasoline having an octane number of 90 can be produced by alkylation process

Last Answer : (C) All the alkylation processes use very high temperature (> 1000°C)

Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3

Description : Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3

Last Answer : (A) AgO

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

Anthracene undergoes oxidation with O2/V2O5 at 500°C to give (a) Benzoic acid (b) Anthraquinone (c) Phthalic acid (d) Benzophenone

Description : Anthracene undergoes oxidation with O2/V2O5 at 500°C to give (a) Benzoic acid (b) Anthraquinone (c) Phthalic acid (d) Benzophenone

Last Answer : Anthraquinone

Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene which is a monomer for the production of polystyrene, is commercially produced by the (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C) Raw materials for DDT manufacture are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Description : Pick out the wrong statement. (A) Catalytic hydrogenation of carbon monoxide produces methyl alcohol (B) In nylon-6, the number 6 represents the total number of carbon atoms in the ring (C ... are benzene and chlorine (D) Ethanolamines are produced by using ammonia and ethylene oxide as raw material

Last Answer : (C) Raw materials for DDT manufacture are benzene and chlorine

Ethanol amine is produced using ammonia and (A) Ethyl benzene (B) Ethylene oxide (C) Ethanol (D) Ethane

Description : Ethanol amine is produced using ammonia and (A) Ethyl benzene (B) Ethylene oxide (C) Ethanol (D) Ethane

Last Answer : (B) Ethylene oxide

Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Description : Styrene (a monomer for the production of polystyrene) is commercially produced by (A) Catalytic dehydrogenation of ethyl benzene (B) Dehydration of ethyl alcohol followed by hydrogenation (C) Reacting ethylene oxide with acetaldehyde (D) Fermentation of starch

Last Answer : (A) Catalytic dehydrogenation of ethyl benzene

Which of the following rubbers has the widest service temperature range (-75 to 275°C)? (A) Butyl rubber (B) Silicon rubber (C) Nitrile rubber (D) Silicone rubber

Description : Which of the following rubbers has the widest service temperature range (-75 to 275°C)? (A) Butyl rubber (B) Silicon rubber (C) Nitrile rubber (D) Silicone rubber

Last Answer : (D) Silicone rubber

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Which gas is produced after the application of Calcium Carbide to the fruits, for rapid ripening? a. Methane b. Carbon-di-oxide c. Acetylene d. Ethylene

Description : Which gas is produced after the application of Calcium Carbide to the fruits, for rapid ripening? a. Methane b. Carbon-di-oxide c. Acetylene d. Ethylene

Last Answer : c. Acetylene

Which gas is produced after the application of Calcium Carbide to the fruits, for rapid ripening? a. Methane b. Carbon-di-oxide c. Acetylene d. Ethylene

Description : Which gas is produced after the application of Calcium Carbide to the fruits, for rapid ripening? a. Methane b. Carbon-di-oxide c. Acetylene d. Ethylene

Last Answer : c. Acetylene

Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface between B and C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Description : Three materials A, B and C of equal thickness and of thermal conductivity of 20, 40 & 60 kcal/hr. m. °C respectively are joined together. The temperature outside of A and C are 30°C and 100°C respectively. The interface ... C will be at a temperature of __________ °C. (A) 40 (B) 95 (C) 70 (D) 50

Last Answer : (C) 70

The value of y = cp/cv. at < 500°C for air & most common gases can be safely assumed to be (A) 0.8 (B) 1 (C) 1.4 (D) 1.8

Description : The value of y = cp/cv. at < 500°C for air & most common gases can be safely assumed to be (A) 0.8 (B) 1 (C) 1.4 (D) 1.8

Last Answer : Option C

Operating condition in the electrical dehydrators for crude oil is about (A) 6.5 kgf/Cm2 & 95°C (B) 1 atm. & 110 °C (C) 20 kgf/cm2 & 110°C (D) 50 atm. and 150°C

Description : Operating condition in the electrical dehydrators for crude oil is about (A) 6.5 kgf/Cm2 & 95°C (B) 1 atm. & 110 °C (C) 20 kgf/cm2 & 110°C (D) 50 atm. and 150°C

Last Answer : (A) 6.5 kgf/Cm2 & 95°C

A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The temperature at a distance 100 mm from the dipped end becomes 40°C at time, t = 200 s. The same temperature is achieved at a distance of 200 mm from the dipped end at time (A) t = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Description : A long iron rod initially at a temperature of 20°C has one end dipped in boiling water (100°C) at time, t = 0. The curved surface of the rod is insulated so that heat conduction is one dimensional in the axial direction. The ... = 283 s (B) t = 356 s (C) t = 400 s (D) t = 800 s

Last Answer : (D) t = 800 s

The radiation heat flux from a heating element at a temperature of 800°C, in a furnace maintained at 300°C is 8 kW/m2 . The flux, when the element temperature is increased to 1000°C for the same furnace temperature is (A) 11.2 kW/m2(B) 12.0 kW/m2(C) 14.6 kW/m2(D) 16.5 kW/m

Description : The radiation heat flux from a heating element at a temperature of 800°C, in a furnace maintained at 300°C is 8 kW/m2 . The flux, when the element temperature is increased to 1000°C for the same furnace temperature is (A) 11.2 kW/m2 (B) 12.0 kW/m2 (C) 14.6 kW/m2 (D) 16.5 kW/m

Last Answer : (D) 16.5 kW/m2

A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. Specific heat of block material is 0.4 kJ.kg-1. K-1. Ignoring the effect of expansion and contraction and also the heat capacity to tank, the total entropy change in kJ.kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Description : A solid metallic block weighing 5 kg has an initial temperature of 500°C. 40 kg of water initially at 25°C is contained in a perfectly insulated tank. The metallic block is brought into contact with water. Both of them come to equilibrium. ... .kg-1, K-1is (A) -1.87 (B) 0 (C) 1.26 (D) 3.91

Last Answer : (B) 0

__________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Description : __________ is the process of coating the surface of steel with aluminium oxide, thereby imparting it increased resistance to corrosion & oxidation upto a temperature of 700°C. (A) Veneering (B) Galvanising (C) Electroplating (D) Calorising

Last Answer : (D) Calorising

Thermal pyrolysis of ethylene dichloride produces (A) Trichloroethylene (B) Vinyl chloride (C) Ethanol amine (D) Ethylene oxide

Description : Thermal pyrolysis of ethylene dichloride produces (A) Trichloroethylene (B) Vinyl chloride (C) Ethanol amine (D) Ethylene oxide

Last Answer : (B) Vinyl chloride

In case of failed ATM transactions, if the amount is not credited to customer‟s account within 7 working days from the date of receipt of the complaint. Banks have to pay compensation at the rate of Rs.________ per day. A. 150 B. 200 C. 100 D. 10 E. 50

Description : In case of failed ATM transactions, if the amount is not credited to customer‟s account within 7 working days from the date of receipt of the complaint. Banks have to pay compensation at the rate of Rs.________ per day. A. 150 B. 200 C. 100 D. 10 E. 50

Last Answer : C. 100 Explanation: Reconciliation of failed transactions at ATMs – For any failure to re-credit the customer‘s account within 7 working days from the date of receipt of the complaint, the bank will pay compensation of Rs.100/-, per day, to the aggrieved customer.

Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil each attaining the bath temperature eventually. The time required for 90% change in temperature is the smallest for (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Description : Three solid objects of the same material and of equal mass-a sphere, a cylinder (length = diameter) and a cube are at 500°C initially. These are dropped in a quenching bath containing a large volume of cooling oil ... (A) Cube (B) Cylinder (C) Sphere (D) Equal for all the three

Last Answer : (A) Cube

With increase in the time of carbonisation at a particular temperature(say 1000°C), the __________ percentage in coke oven gas increases. (A) Hydrogen (B) Methane (C) Unsaturated hydrocarbons (D) All (A), (B) and (C)

Description : With increase in the time of carbonisation at a particular temperature(say 1000°C), the __________ percentage in coke oven gas increases. (A) Hydrogen (B) Methane (C) Unsaturated hydrocarbons (D) All (A), (B) and (C)

Last Answer : (A) Hydrogen

Iron is not used alone as a catalyst in ammonia synthesis, because (A) Its activity declines rapidly, if heated to above 520°C (B) It decomposes ammonia (C) It gets oxidised above 500°C (D) None of these

Description : Iron is not used alone as a catalyst in ammonia synthesis, because (A) Its activity declines rapidly, if heated to above 520°C (B) It decomposes ammonia (C) It gets oxidised above 500°C (D) None of these

Last Answer : (A) Its activity declines rapidly, if heated to above 520°C

__________ glass is used in the mercury in glass thermometer meant for measuring a temperature of 500°C. (A) Borosilicate (B) High silica (C) Supermax (D) Lead

Description : __________ glass is used in the mercury in glass thermometer meant for measuring a temperature of 500°C. (A) Borosilicate (B) High silica (C) Supermax (D) Lead

Last Answer : (C) Supermax

Photochemical smog is formed from automobile exhaust (A) By reaction of hydrocarbon & nitric oxide in presence of sunlight (B) Appears only on sunny days (C) Is harmful for crops and trees also besides causing eye irritation & asthma (D) All (A), (B) & (C)

Description : Photochemical smog is formed from automobile exhaust (A) By reaction of hydrocarbon & nitric oxide in presence of sunlight (B) Appears only on sunny days (C) Is harmful for crops and trees also besides causing eye irritation & asthma (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

An example of autothermal reactor operation is (A) Sulphur dioxide oxidation (B) Ethylene oxidation (C) Benzene oxidation (D) Ammonia synthesis

Description : An example of autothermal reactor operation is (A) Sulphur dioxide oxidation (B) Ethylene oxidation (C) Benzene oxidation (D) Ammonia synthesis

Last Answer : (B) Ethylene oxidation

A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2 MN/mm2 , the tensile force developed at a temperature of 50°C, is (A) 80 N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option

Description : A steel rod of sectional area 250 sq. mm connects two parallel walls 5 m apart. The nuts at the  ends were tightened when the rod was heated to 100°C. If steel = 0.000012/C°, Esteel = 0.2  MN/mm2 , the ... N/mm2 (B) 100 N/mm2 (C) 120 N/mm2 (D) 150 N/mm2 Answer: Option 

Last Answer : (C) 120 N/mm

Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Description : Gum formation in stored gasoline is mainly due to the (A) Alkylation of unsaturated (B) Presence of sulphur (C) Oxidation & polymerisation of unsaturated (D) Higher aromatic content

Last Answer : (B) Presence of sulphur

Lagoons used for purification of polluted water (A) Are large shallow artificial lakes also known as clarification lakes, maturation ponds or oxidation ponds (B) Use micro-organisms/bacteria in presence of dissolved oxygen (C) Gives an excellent final effluent (with 3 to 4 lagoons arranged in series) having suspended solid < 1 mg/litre and BOD = 3.8 mg/litre (D) All (A), (B) & (C)

Description : Lagoons used for purification of polluted water (A) Are large shallow artificial lakes also known as clarification lakes, maturation ponds or oxidation ponds (B) Use micro-organisms/bacteria in presence of dissolved oxygen (C) Gives an ... 1 mg/litre and BOD = 3.8 mg/litre (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

A supercritical boiler is one that operates above the pressure and temperature of following values a) 100 kg/cm² and 540°C b) 1 kg/cm² and 100°C c) 218 kg/cm² abs and 373°C d) 218 kg/cm² abs and 540°C

Description : A supercritical boiler is one that operates above the pressure and temperature of following values a) 100 kg/cm² and 540°C b) 1 kg/cm² and 100°C c) 218 kg/cm² abs and 373°C d) 218 kg/cm² abs and 540°C

Last Answer : c) 218 kg/cm² abs and 373°C

Ethylene oxide reacts with ammonia to give (a) 1-Aminoethanol (b) Ethylamine (c) 2-Aminoethanol (d) Acetamide

Description : Ethylene oxide reacts with ammonia to give (a) 1-Aminoethanol (b) Ethylamine (c) 2-Aminoethanol (d) Acetamide

Last Answer : 2-Aminoethanol

The product of the reaction of ethylene oxide with acidic methanol is (a) CH3OCH2CH2OH (b) CH3CH2CH2CH2OH (c) HOCH2CH2OH (d) CH3CH2OCH2CH3

Description : The product of the reaction of ethylene oxide with acidic methanol is (a) CH3OCH2CH2OH (b) CH3CH2CH2CH2OH (c) HOCH2CH2OH (d) CH3CH2OCH2CH3

Last Answer : CH3OCH2CH2OH

Acid-catalyzed hydrolysis of ethylene oxide yields (a) CH3CH2OH (b) HOCH2CH2OH (c) CH3CH2CH2OH (d) HOCH2CH2CH2OH

Description : Acid-catalyzed hydrolysis of ethylene oxide yields (a) CH3CH2OH (b) HOCH2CH2OH (c) CH3CH2CH2OH (d) HOCH2CH2CH2OH

Last Answer : HOCH2CH2OH

Ethylene oxide reacts with HBr to give (a) 1-Bromoethanol (b) Ethyl bromide (c) 2-Bromoethanol (c) Ethylene glycol

Description : Ethylene oxide reacts with HBr to give (a) 1-Bromoethanol (b) Ethyl bromide (c) 2-Bromoethanol (c) Ethylene glycol

Last Answer : 2-Bromoethanol

When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol

Description : When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol

Last Answer : Oxalic acid

Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid

Description : Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid

Last Answer : Ethylene glycol

Which of the following gases were used to decontaminate mail after the anthrax scare? a. Ethylene Oxide b. Chlorine Dioxide c. Carbon Dioxide d. Ozone

Description : Which of the following gases were used to decontaminate mail after the anthrax scare? a. Ethylene Oxide b. Chlorine Dioxide c. Carbon Dioxide d. Ozone

Last Answer : b. Chlorine Dioxide

Ethylene oxide can be used toa. Kill Bacterial Spores. b. Clean Wounds. c. Sanitize Work Surfaces. d. Treat Water Supplies.

Description : Ethylene oxide can be used toa. Kill Bacterial Spores. b. Clean Wounds. c. Sanitize Work Surfaces. d. Treat Water Supplies.

Last Answer : a. Kill Bacterial Spores.

Royce Sachet is suitable indicator for _ _ _ _ _ _ _ _ A Formaldehyde B Β-propiolactone C Isopropyl alcohol D Ethylene oxide

Description : Royce Sachet is suitable indicator for _ _ _ _ _ _ _ _ A Formaldehyde B Β-propiolactone C Isopropyl alcohol D Ethylene oxide

Last Answer : D Ethylene oxide

Concentration range (given as weight of gas per unit chamber volume) for ethylene oxide is A 15–100mg/L B 800–1200mg/L C 120–180mg/L D 1000–1200mg/L

Description : Concentration range (given as weight of gas per unit chamber volume) for ethylene oxide is A 15–100mg/L B 800–1200mg/L C 120–180mg/L D 1000–1200mg/L

Last Answer : B 800–1200mg/L

Discuss in brief gaseous sterilization using ethylene oxide.

Description : Discuss in brief gaseous sterilization using ethylene oxide. 

Last Answer : Gaseous sterilization using Ethylene oxide:  It is gas at room temperature, highly inflammable & forms explosive mixture with air. This disadvantage can be overcome by using mixture of 10% ethylene ... toxic & inflammable gas. Sophisticated instruments are required & skilled persons are needed.

Which of the following is the LEAST effective technique used to sterilize? a) heat b) cold c) ethylene oxide (pron: ETH-e-leen) d) filtration

Description : Which of the following is the LEAST effective technique used to sterilize? a) heat b) cold c) ethylene oxide (pron: ETH-e-leen) d) filtration

Last Answer : ANSWER: B -- COLD

The concentration (weight %) of nitric acid produced by the oxidation of ammonia and absorption of nitrogen oxides with water is about __________ percent. (A) 60 (B) 30 (C) 95 (D) 100

Description : The concentration (weight %) of nitric acid produced by the oxidation of ammonia and absorption of nitrogen oxides with water is about __________ percent. (A) 60 (B) 30 (C) 95 (D) 100

Last Answer : (A) 60