Description : Cold chisel’s hammers are made of (A) High speed steel (B) High carbon steel (C) Forged steel (D) Mild steel
Last Answer : (B) High carbon steel
Description : Hammers and railway rails are normally made of (A) Mild steel (B) Dead mild steel (C) Medium carbon steel (D) High carbon stee
Last Answer : (D) High carbon stee
Description : In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel
Last Answer : (C) High speed steel
Description : My first is in wield, sever bones and marrow. My second is in blade, forged in cold steel. My third is in arbalest, and also in arrows. My fourth is in power, plunged through a shield. My fifth is in honour, and also in vows My last will put an end to it all.What am I? -Riddles
Last Answer : A weapon!
Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility
Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon stee
Last Answer : (C) Carbides
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon steel
Last Answer : (A) Mild steel
Description : Balls for ball mills are never made of (A) Forged/cast steel (B) Lead (C) Cast iron (D) Alloy steel
Last Answer : (B) Lead
Description : .The land side of a mould board plough is made of: A. Malleable iron B. Forged steel C. C45 steel D. Soft Centre steel
Last Answer : D. Soft Centre steel
Description : The landside of a mould board plough is made of: a) Malleable iron b) Forged steel c) C45 steel d) Soft centre steel
Last Answer : d) Soft centre steel
Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron
Last Answer : (B) Pig iron
Description : Which of the following has the poorest weldability? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) High-carbon steel
Last Answer : (D) High-carbon steel
Description : Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel
Last Answer : (D) High carbon steel
Description : An alloy of iron containing 4% carbon is called (A) High carbon steel (B) Wrought iron (C) Mild steel (D) None of these
Last Answer : (D) None of these
Description : Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy
Last Answer : (A) Low carbon
Description : Which of the following will have the highest melting point? (A) Pig iron (B) Mild steel (C) Wrought iron (D) High carbon stee
Last Answer : (C) Wrought iron
Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel
Last Answer : (C) Mild steel
Last Answer : Option C
Description : __________ is used as a material of construction for the blade of power saw. (A) Wrought iron (B) Stainless steel (C) Mild steel (D) High speed steel
Last Answer : Option D
Description : Aluminium alloy is one of the most suitable materials of construction for aircrafts mainly due to its (A) High strength to weight ratio (B) Low temperature strength properties (C) Its ability ... rolled, forged & stamped (D) High strength and corrosion & oxidation-resistance at elevated temperature
Last Answer : (A) High strength to weight ratio
Description : What is the difference between high carbon and forged cutlery?
Last Answer : High carbon knives are made so that they are strong but very flexible whereas forged cutlery is a knife made from one solid piece of metal that is hammered into shape allowing the weight of the ... strength and resilience than high carbon cutlery because of the process in which the blades are made.
Description : plows are rows of concave steel discs that revolve as they are pulled. A. Disk. C) Chisel B. Tined. D) Sub soiling .
Last Answer : Disk
Description : The shovel of seed drill is made up of: A. Cast iron B. Mild steel C. White metal D. Carbon steel
Last Answer : Carbon steel
Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel
Last Answer : a. Soft centre steel
Description : Pick out the wrong statement. (A) Wrought iron contains about 0.02% carbon (B) Wrought iron cannot be easily forged and welded (C) The chilled cast iron does not contain graphite (D) Spheroidal grey cast iron contains graphite flakes
Last Answer : (B) Wrought iron cannot be easily forged and welded
Description : Which of the following materials may prove unsuitable for handling acetic acid (glacial & anhydrous) at 40°C? (A) Silicone rubber, teflon, porcelain and wood (B) Nickel, monel, stainless steel and graphite (C) Aluminium, copper, high silicon iron (D) Brass, cast iron, mild steel and tin
Last Answer : (D) Brass, cast iron, mild steel and tin
Description : H2SO4 (< 50% concentration) is corrosive to (A) Aluminium, mild steel, stainless steel, concrete & tin (B) Copper, cast iron & high silicon iron (14% Si) (C) Rubber (butyl and hard), silicone rubber & Teflon (D) Glass, graphite, porcelain & stoneware
Last Answer : (A) Aluminium, mild steel, stainless steel, concrete & tin
Description : The steel generally used in R.C.C. work, is (A) Stainless (B) Mild steel (C) High carbon steel (D) High tension steel
Last Answer : Answer: Option B
Description : Select the correct statement (A) Elastic modulus of high tensile steel is nearly the same as that of mild steel (B) Elastic modulus of high tensile steel is more than that of mild steel (C) ... high carbon steel is less than that in mild steel (D) High tensile steel is cheaper than mild steel
Last Answer : Answer: Option A
Description : The steel used in R.C.C. work is (A) Stainless steel (B) Mild steel (C) High carbon steel (D) Wrought iron
Description : Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel
Description : Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron
Description : Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel
Description : Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades
Last Answer : (B) Flanges
Description : Solute atoms which cause yield point phenomenon in mild steel are/is (A) Aluminium (B) Boron (C) Carbon (D) Nitrogen
Last Answer : (C) Carbon
Description : The steel used in steel cored conductors is usually (a) alloy steel (b) stainless steel (c) mild steel (d) high speed steel (e) all of the above
Last Answer : (c) mild steel
Description : 100% H2SO4 at 30°C can't be stored in a vessel made/lined with (A) Cast iron and high silicon iron (B) Mild steel and stainless steel (C) Aluminium, tin and rubber (D) Teflon, glass and porcelain
Last Answer : (C) Aluminium, tin and rubber
Description : Rotary driers are generally made of (A) Cast iron (B) Mild steel (C) High silicon iron (14% Si) (D) Tin lined with refractory bricks
Last Answer : (B) Mild steel
Description : The 'bomb' in the bomb calorimeter is made of (A) Molybdenum stainless steel (B) Mild steel (C) High silicon iron (14% Si) (D) Copper
Last Answer : (A) Molybdenum stainless steel
Description : Pick out the wrong statement. (A) Seam welding, projection welding & spot welding are the classification of electrical resistance welding (B) Electrode tip in spot welding is of copper and the ... joined are overlapped and placed between two electrodes (D) Mild steel sheet cannot be spot welded
Last Answer : (D) Mild steel sheet cannot be spot welded
Description : Percentage of carbon content in mild steel is (A) Less than 0.25 (B) Between 0.25 and 0.7 (C) Between 0.7 and 1.5 (D) Greater than 1.5
Description : Mild steel is an alloy with carbon content a)0.25%. b)5% c)10%. d)25%
Last Answer : a)0.25%.
Description : The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %
Last Answer : (A) 0.08 to 0.3 %
Description : The following types of blades are used with the rotor in rotary tiller a. ‗L‘ type blade c) both A & B b. Twisted blade d) chisel plough
Last Answer : both A & B
Description : In case of a hammer crusher, (A) Crushing takes place by impact breaking (B) Maximum acceptable feed size is 30 cms (C) Reduction ratio can be varied by adjusting the distance from cage to hammers (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : . In case of a hammer crusher, the (A) Feed may be highly abrasive (Moh's scale >5) (B) Minimum product size is 3 mm (C) Maximum feed size may be 50 mm (D) Rotor shaft carrying hammers can be vertical or horizontal
Last Answer : (D) Rotor shaft carrying hammers can be vertical or horizontal
Description : Plate and frame filter press is usually made of (A) Mild steel (B) Cast iron (C) Stainless steel (D) Galvanised iron
Last Answer : (B) Cast iron
Description : Acetaldehyde is produced by hydration of acetylene in a sulphuric acid solution of mercuric sulphate. Hydration tower is made of (A) Rubber lined mild steel (B) Lead lined mild steel (C) Aluminium (D) Cast iron
Last Answer : (A) Rubber lined mild steel
Description : Tank furnace used for melting of glass is made of (A) Mild steel (B) Cast iron (C) Refractory blocks (D) Stainless steel
Last Answer : (C) Refractory blocks