Description : Select the correct statement (A) Elastic modulus of high tensile steel is nearly the same as that of mild steel (B) Elastic modulus of high tensile steel is more than that of mild steel (C) ... high carbon steel is less than that in mild steel (D) High tensile steel is cheaper than mild steel
Last Answer : Answer: Option A
Description : The percentage of carbon in mild steel is (A) 0.08 to 0.3 % (B) 0.5 to 1.4 % (D) 2.35 % (D) 0.5 %
Last Answer : (A) 0.08 to 0.3 %
Description : Mild steel is an alloy with carbon content a)0.25%. b)5% c)10%. d)25%
Last Answer : a)0.25%.
Description : Which of the following has the least carbon percentage? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) White cast iron
Last Answer : (C) Wrought iron
Description : Carbon percentage is the same in cast iron and (A) Wrought iron (B) Pig iron (C) Mild steel (D) High silicon (14%) iron
Last Answer : (B) Pig iron
Description : The steel generally used in R.C.C. work, is (A) Stainless (B) Mild steel (C) High carbon steel (D) High tension steel
Last Answer : Answer: Option B
Description : The steel used in R.C.C. work is (A) Stainless steel (B) Mild steel (C) High carbon steel (D) Wrought iron
Description : Which of the following is the purest form of iron? (A) Cast iron (B) Wrought iron (C) Mild steel (D) High carbon steel
Description : Mild steel is (A) A low carbon steel (0.05 to 0.3% carbon) (B) Highly resistant to corrosion (as much as stainless steel) (C) A high carbon steel (0.5 to 1.5% carbon) (D) Very poor in strength & ductility
Last Answer : (A) A low carbon steel (0.05 to 0.3% carbon)
Description : High carbon steel having carbon content about (A) 0.25 % (B) 0.25 – 0.50 % (C) 0.50 – 1.5 % (D) 2.5 - 4.5 %
Last Answer : (C) 0.50 – 1.5 %
Description : Medium Carbon steel was carbon content about (A) 0.25 % (B) 0.25 – 0.50 % (C) 0.50 – 1.5 % (D) 2.5 – 4.5 %
Last Answer : (B) 0.25 – 0.50 %
Description : Dead mild steel, which contains 0.10 to 0.15 percent carbon is used for making (A) Shafts (B) Flanges (C) Gears (D) Shear blades
Last Answer : (B) Flanges
Description : Limiting moment of resistance of a singly reinforced section for mild steel is [ A ] Mu = 0.133 fck bd2 [ B ] Mu = 0.138 fck bd2 [ C ] Mu = 0.148 fck bd2 [ D ] Mu = 0.153 fck bd2
Last Answer : [ C ] Mu = 0.148 fck bd2
Description : Minimum percentage area of tension reinforcement , when the grade of steel is Fe-250 [ A ] 0.2 [ B ] 0.25 [ C ] 0.34 [ D ] 0.44
Last Answer : [ C ] 0.34
Description : Maximum change in the hardness of martensite occurs in the carbon content range of __________ percent in steel. (A) 0.01 to 0.10 (B) 0.2 to 0.4 (C) 0.5 to 0.7 (D) 0.8 to 1.0
Last Answer : (B) 0.2 to 0.4
Description : Select the incorrect statement from the following [ A ] Reinforcing bars in a column should not be less than 12 mm in diameter [ B ] The number of longitudinal bars in a circular column should not ... The minimum percentage of longitudinal steel in columns should be 0.8% [ D ] None of the above
Last Answer : [ B ] The number of longitudinal bars in a circular column should not exceed four
Description : Minimum percentage of longitudinal steel in a column should not be less than [ A ] 0.60% [ B ] 0.80% [ C ] 1.00% [ D ] 1.20%
Last Answer : [ B ] 0.80%
Description : According to IS:456-2000, the maximum allowable crack width (in mm) for mild type of environmental condition [ A ] 0.1 [ B ] 0.2 [ C ] 0.25 [ D ] 0.3
Last Answer : [ D ] 0.3
Description : Which one is remelted and poured into moulds to get cast iron? (A) Wrought iron (B) Pig iron (C) Low carbon steel (D) Mild steel
Description : Hammers and railway rails are normally made of (A) Mild steel (B) Dead mild steel (C) Medium carbon steel (D) High carbon stee
Last Answer : (D) High carbon stee
Description : Which of the following has the poorest weldability? (A) Low carbon steel (B) Mild steel (C) Wrought iron (D) High-carbon steel
Last Answer : (D) High-carbon steel
Description : Which of the following has the highest compressive strength? (A) Wrought iron (B) Cast iron (C) Mild steel (D) High carbon steel
Last Answer : (D) High carbon steel
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon stee
Last Answer : (C) Carbides
Description : An alloy of iron containing 4% carbon is called (A) High carbon steel (B) Wrought iron (C) Mild steel (D) None of these
Last Answer : (D) None of these
Description : Mild steel is a/an __________ steel. (A) Low carbon (B) Medium carbon (C) High carbon (D) High alloy
Last Answer : (A) Low carbon
Description : Which of the following will have the highest melting point? (A) Pig iron (B) Mild steel (C) Wrought iron (D) High carbon stee
Description : Solute atoms which cause yield point phenomenon in mild steel are/is (A) Aluminium (B) Boron (C) Carbon (D) Nitrogen
Last Answer : (C) Carbon
Description : In a drilling process, the metal is removed by both shearing & extrusion. General purpose drills are made of (A) Stainless steel (B) Mild steel (C) High speed steel (D) High carbon steel
Last Answer : (C) High speed steel
Description : Cold chisel’s hammers are made of (A) High speed steel (B) High carbon steel (C) Forged steel (D) Mild steel
Last Answer : (B) High carbon steel
Description : Cold chisel & hammers are made of (A) High speed steel (B) High carbon steel (C) Forged steel (D) Mild steel
Description : Oxyacetylene reducing flame is used while carrying out welding on (A) Alloy steel (B) Grey cast iron (C) Mild steel (D) High carbon steel
Last Answer : (C) Mild steel
Description : Dies for wire drawing are generally made of (A) Mild steel (B) Stainless steel (C) Carbides (D) High carbon steel
Last Answer : (A) Mild steel
Last Answer : Option C
Description : The shovel of seed drill is made up of: A. Cast iron B. Mild steel C. White metal D. Carbon steel
Last Answer : Carbon steel
Description : Mould board are usually made from a. Soft centre steel b. Hardened carbon steel c. Chilled cast iron d. Mild steel
Last Answer : a. Soft centre steel
Description : Water content of soil can (A) Never be greater than 100 % (B) Take values only from 0 % to 100 % (C) Be less than 0 % (D) Be greater than 100 %
Last Answer : Answer: Option D
Description : Steel contains carbon approximately (A) 1.50% to 5.6% (B) 0.05% to 1.75% (C) 0.25 % (D) None to these
Description : Euler’s formula is not valid for mild steel column when slenderness ratio is (a) More than 100 (b) Less than 100 (c) Less than 80 (d)More than 80
Last Answer : (c) Less than 80
Description : Consider the following salient points in a stress-strain curve of a mild steel bar: 1. Yield point 2. Braking point 3. Yield plateau 4 . Proportionality limit 5. Ultimate point The correct sequence in which they occur while testing the mild ... , 5 and 2 (c) 4, 1, 3, 5 and 2 (d) 1, 4, 2, 3 and 5
Last Answer : (c) 4, 1, 3, 5 and 2
Description : Statement -1Wrought iron in more malleable and ducitlle than steel. Statement -2: It contains slightly less percentage of carbon.
Last Answer : Statement -1Wrought iron in more malleable and ducitlle than steel. Statement -2: It contains slightly less percentage of carbon.
Description : The allowable tensile stress in mild steel stirrups, reinforced cement concrete, is (A) 1400 kg/cm2 (B) 190 kg/cm2 (C) 260 kg/cm2 (D) 230 kg/cm
Description : Mild steel is used for (A) Structural works in beams, joints and girders (B) Small sized water pipes (C) Columns and struts (D) None of these
Description : For high grade instruments the steel preferred to, is (A) Cast steel (B) Bessemer steel (C) Mild steel (D) Whitworth compressed steel
Description : The steel used for the manufacture of rails, is (A) Bessemer steel (B) Mild steel (C) Cast steel (D) Stainless steel
Description : Compared to mild steel, cast iron has (i) High compressive strength (ii) High tensile strength (iii) Low compressive strength (iv) Low tensile strength The correct answer is (A) (i) and (ii) (B) (ii) and (iii) (C) (iii) and (iv) (D) (i) and (iv)
Description : The ultimate tensile strength of structural mild steel is about (A) 160 N/mm² (B) 260 N/mm² (C) 420 N/mm² (D) 520 N/mm
Last Answer : Answer: Option C
Description : The allowable shear stress in stiffened webs of mild steel beams decreases with (a) Decrease in the spacing of the stiffeners (b) Increase in the spacing of the stiffeners (c) Decrease in the effective depth (d) Increase in the effective depth
Last Answer : (b) Increase in the spacing of the stiffeners
Description : The allowable shear stress in the web of mild steel beams decreases with (a) Decrease in h/t ratio (b) Increase in h/t ratio (c ) Decrease in thickness (d) Increase in height Where h is the height and t is the thickness
Last Answer : (b) Increase in h/t ratio