In the acid Bessemer process, the hot metal should have the following composition. (A) S < 0.05% and P < 0.05% (B) S < 0.05% and P < 1.5% (C) S < 0.05% and P > 1.5% (D) S > 1.5% and P < 0.05%

In the acid Bessemer process, the hot metal should have the following composition.
(A) S < 0.05% and P < 0.05%
(B) S < 0.05% and P < 1.5%
(C) S < 0.05% and P > 1.5%
(D) S > 1.5% and P < 0.05%
by

1 Answer

Answer :

(A) S < 0.05% and P < 0.05%
by

Related questions

The percentage of carbon in low carbon steel is A. 0.05% B. 0.15% C. 0.3% D. 0.5%

Description : The percentage of carbon in low carbon steel is A. 0.05% B. 0.15% C. 0.3% D. 0.5%

Last Answer : B. 0.15%

Payment of commission on PPF and SCSS is a) 1% and 0.5% d) 2% and .05% c) 0.5% and Nil d) No commission paid

Description : Payment of commission on PPF and SCSS is a) 1% and 0.5% d) 2% and .05% c) 0.5% and Nil d) No commission paid

Last Answer : d) No commission paid

Cast iron contains carbon approximately (A) 1.5% to 5.5% (B) 0.05% to 1.75% (C) 0.250 % (D) None to these

Description : Cast iron contains carbon approximately (A) 1.5% to 5.5% (B) 0.05% to 1.75% (C) 0.250 % (D) None to these

Last Answer : Answer: Option A

A metal plate weighting 750g is to be electroplated wiwth 0.05% of its weight of silver. If a current of 0.8A is used. Find the time needed for deposi

Description : A metal plate weighting 750g is to be electroplated wiwth 0.05% of its weight of silver. If a current of 0.8A is used. Find the time needed for deposi

Last Answer : A metal plate weighting 750g is to be electroplated wiwth 0.05% of its weight of silver. If a current of 0.8A is ... 37 s C. 4 min 16 s D. 6 min 10 s

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate.(b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum. (c) Tomato is a greenhouse crop which can be grown in CO2-enriched atmosphere for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct? (a) Increasing atmospheric CO2 concentration up to 0.05% can enhance CO2 fixation rate. ( ... for higher yield. (d) Light saturation for CO2 fixation occurs at 10% of full sunlight.

Last Answer : (b) C3 plants respond to higher temperature with enhanced photosynthesis while C4 plants have much lower temperature optimum

Steel contains carbon approximately (A) 1.50% to 5.6% (B) 0.05% to 1.75% (C) 0.25 % (D) None to these

Description : Steel contains carbon approximately (A) 1.50% to 5.6% (B) 0.05% to 1.75% (C) 0.25 % (D) None to these

Last Answer : Answer: Option B

With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation rate (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum (3) Tomato is a greenhouse crop which can be grown in CO 2 - enriched atmosphere for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Description : With reference to factors affecting the rate of photosynthesis, which of the following statements is not correct ? (1) Increasing atmospheric CO 2 concentration up to 0.05% can enhance CO 2 fixation ... for higher yield (4) Light saturation for CO 2 fixation occurs at 10% of full sunlight

Last Answer : (2) C 3 plants respond to higher temperatures with enhanced photosynthesis while C 4 plants have much lower temperature optimum

How many tablets, each containing 8.75 grains of mercuric chloride will be required to make one quart of 0.05% solution?

Description : How many tablets, each containing 8.75 grains of mercuric chloride will be required to make one quart of 0.05% solution?

Last Answer : 4.375 gr. in 1 fl ounce = 1% w/v solution 4.375 gr X 0.05 = 0.2187 gr required to get 1 fl.oz 0.05% 0.2187 gr x 40 = 8.748 gr≈ 8.75 grain required to get 40 fl.oz 0.05 % 8.75 gr/8.75 gr = 1 tablets Therefore, one tablet is required to prepare one quart of 0.05% solution.

Suppose that from given statistics, it is known that meningitis causes stiff neck 50% of the time, that the proportion of persons having meningitis is 1/50000, and that the proportion of people having stiff neck is 1/20. Then the percentage of people who had meningitis and complain about stiff neck is: (A) 0.01% (B) 0.02% (C) 0.04% (D) 0.05%

Description : Suppose that from given statistics, it is known that meningitis causes stiff neck 50% of the time, that the proportion of persons having meningitis is 1/50000, and that the proportion of people having stiff neck is 1/20. Then ... complain about stiff neck is: (A) 0.01% (B) 0.02% (C) 0.04% (D) 0.05%

Last Answer : Answer: B

(i) Copper - Bessemer converter (ii) Iorpn- Blastfurnace (iii) chromium - Aluminothermic process (iv) Tin - Carbon reducaton (v) Zinc -Belgian process

Description : (i) Copper - Bessemer converter (ii) Iorpn- Blastfurnace (iii) chromium - Aluminothermic process (iv) Tin - Carbon reducaton (v) Zinc -Belgian process

Last Answer : (i) Copper - Bessemer converter (ii) Iorpn- Blastfurnace (iii) chromium - Aluminothermic process (iv ... data how many of them are correctly matched ?

How did the Bessemer process lead to a boom in the railroads?

Description : How did the Bessemer process lead to a boom in the railroads?

Last Answer : What is the answer ?

Softer variety of steel may be obtained by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth

Description : Softer variety of steel may be obtained by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth

Last Answer : Answer: Option C

Bessemer process is used for the manufacture of (A) Pig iron (B) Cast iron (C) Wrought iron D) Steel

Description : Bessemer process is used for the manufacture of (A) Pig iron (B) Cast iron (C) Wrought iron D) Steel

Last Answer : Answer: Option D

The variety of pig iron used for the manufacture of steel by Bessemer process, is (A) Bessemer pig (B) Grey pig (C) White forge pig (D) Mottled pig

Description : The variety of pig iron used for the manufacture of steel by Bessemer process, is (A) Bessemer pig (B) Grey pig (C) White forge pig (D) Mottled pig

Last Answer : Answer: Option A

The steel which contains fissures and cavities, is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The steel which contains fissures and cavities, is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option A

Pick up the correct statement from the following: (A) Steel produced by open hearth process is milder than that obtained by the Bessemer process (B) Engineers prefer open hearth steel for structural purpose as it is more homogenous (C) Basic Bessemer process is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel

Description : Pick up the correct statement from the following: (A) Steel produced by open hearth process is milder than that obtained by the Bessemer process (B) Engineers prefer open hearth steel ... is suitable for converting poor ore containing a large proportion of sulphur and phosphorus into steel

Last Answer : Answer: Option D

The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of manufacturing steel by heating short lengths of wrought iron bars mixed with charcoal in fire clay crucibles and collecting the molten iron into moulds, is known as (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option B

The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Description : The process of decarbonising the pig iron completely and then adding proper percentage of carbon for manufacturing steel, is called (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option A

Cast steel is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth proce

Description : Cast steel is manufactured by (A) Cementation process (B) Crucible process (C) Bessemer process (D) Open hearth process

Last Answer : Answer: Option B

Pick up the correct statement from the following: (A) In basic Bessemer process, the steel heats the converter (B) In open-hearth process, the furnace heats the steel (C) In Siemens process, the impurities of pig iron are oxidised by the oxygen of the ore (D) All the above

Description : Pick up the correct statement from the following: (A) In basic Bessemer process, the steel heats the converter (B) In open-hearth process, the furnace heats the steel (C) In Siemens process, the impurities of pig iron are oxidised by the oxygen of the ore (D) All the above

Last Answer : Answer: Option D

Which of the following reaction(s) take place in Bessemer converter for the extraction of Cu?

Description : Which of the following reaction(s) take place in Bessemer converter for the extraction of Cu?

Last Answer : Which of the following reaction(s) take place in Bessemer converter for the extraction of Cu? A. `2CuFeS_(2) + ... ` D. `FeO + SiO_(2) rarr FeSiO_(3)`

In Bessemer converter `Cu_(2)S` is converted in to blister copper in

Description : In Bessemer converter `Cu_(2)S` is converted in to blister copper in

Last Answer : In Bessemer converter `Cu_(2)S` is converted in to blister copper in A. self reduction B. reduction with ... coal gas D. reduction with `H_(2)` gas

Explain higher and lower calorific value of a coal having following composition by mass Carbon 81%,Hydrogen 7%, Oxygen 8%,Nitrogen 2.5%, sulphur 1.5% and remaining is ash

Description : Explain higher and lower calorific value of a coal having following composition by mass Carbon 81%,Hydrogen 7%, Oxygen 8%,Nitrogen 2.5%, sulphur 1.5% and remaining is ash

Last Answer : Carbon C = 81% = 0.81 Hydrogen = H2 = 7% = 0.07 Oxygen = O2 = 8% = 0.08 Nitrogen = N = 2.5% = 0.025 Sulphur = S =1.5% = 0.015 Ash = 2.5% = 0.025 Dulong's formula: H.C.V. of coal = 33800 C + 144500 ... = H.C.V.- 9H2 x 2442 KJ / Kg = 36187.5- 9 x 0.07 x 2442 L.C.V. of coal = 34649.04 KJ / Kg 

In connection with corrosion of metals, passivation is the process that (A) Intensifies deterioration (B) Changes the composition of the metal (C) Inhibits further deterioration (D) None of these

Description : In connection with corrosion of metals, passivation is the process that (A) Intensifies deterioration (B) Changes the composition of the metal (C) Inhibits further deterioration (D) None of these

Last Answer : (C) Inhibits further deterioration

Which is the purest form of iron? (A) Wrought iron (B) Pig iron (C) Bessemer iron (D) Grey iron

Description : Which is the purest form of iron? (A) Wrought iron (B) Pig iron (C) Bessemer iron (D) Grey iron

Last Answer : (A) Wrought iron

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞(B) 0 (C) 1 (D) > 1

Description : The ratio of volume of mixed reactor to the volume of P.F.R. (for identical flow rate, feed composition and conversion) for zero order reaction is: (A) ∞ (B) 0 (C) 1 (D) > 1

Last Answer : (C) 1

Which of the following reactions does not occur in Bessemer converter in the extraction of copper from chalcopyrites ?

Description : Which of the following reactions does not occur in Bessemer converter in the extraction of copper from chalcopyrites ?

Last Answer : Which of the following reactions does not occur in Bessemer converter in the extraction of copper from chalcopyrites ... 2Cu_(2)O rarr 6Cu + SO_(2)`

The final step for the extraction of copper from copper pyrite in Bessemer converter involves the reaction

Description : The final step for the extraction of copper from copper pyrite in Bessemer converter involves the reaction

Last Answer : The final step for the extraction of copper from copper pyrite in Bessemer converter involves the reaction A. ` ... D. `2Cu_(2)O+FeSto4Cu+Fe+SO_(2)`

Pig iron obtained from the furnace which is properly provided with fuel at a very high temperature, is called (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Description : Pig iron obtained from the furnace which is properly provided with fuel at a very high temperature, is called (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Last Answer : Answer: Option B

For light and ornamental casting, the most unsuitable pig iron, is (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Description : For light and ornamental casting, the most unsuitable pig iron, is (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Last Answer : Answer: Option D

If the furnace is provided with insufficient fuel at low temperatures, the type of pig iron produced, is called (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Description : If the furnace is provided with insufficient fuel at low temperatures, the type of pig iron produced, is called (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Last Answer : Answer: Option C

For high grade instruments the steel preferred to, is (A) Cast steel (B) Bessemer steel (C) Mild steel (D) Whitworth compressed steel

Description : For high grade instruments the steel preferred to, is (A) Cast steel (B) Bessemer steel (C) Mild steel (D) Whitworth compressed steel

Last Answer : Answer: Option A

The variety of pig iron used for manufacture of wrought iron, is (A) Bessemer pig (B) Grey or foundry pig (C) White forge pig (D) Mottled pig

Description : The variety of pig iron used for manufacture of wrought iron, is (A) Bessemer pig (B) Grey or foundry pig (C) White forge pig (D) Mottled pig

Last Answer : Answer: Option C

The steel used for the manufacture of rails, is (A) Bessemer steel (B) Mild steel (C) Cast steel (D) Stainless steel

Description : The steel used for the manufacture of rails, is (A) Bessemer steel (B) Mild steel (C) Cast steel (D) Stainless steel

Last Answer : Answer: Option A

Pig iron made from haematite ores free from sulphur, phosphorus and copper, is known as (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Description : Pig iron made from haematite ores free from sulphur, phosphorus and copper, is known as (A) Bessemer pig (B) Grey or foundry pig (C) White or forge pig (D) Mottled pig

Last Answer : Answer: Option A

Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Description : A pycnometer is used for the measurement of (A) Flow rate of molten metal (B) Specific gravity of a liquid (C) Composition of alloys (D) Concentration of a solution

Last Answer : Option B

Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Description : Pick out the wrong statement about the machinability of metals. Machinability of a metal (A) Decreases with increase in strain hardening tendencies (B) Decreases with increase in hardness, in general (C) Depend on the composition, microstructure and physical & mechanical

Last Answer : Option C

One mole feed of a binary mixture of a given composition is flash vaporised at a fixed P and T. If Raoult's law is obeyed, then changing the feed composition would effect (A) The product composition but not the fraction vaporised (B) The product composition as well as the fraction vaporised (C) The fraction vaporised but not the product composition (D) Neither the product composition nor the fraction vaporised

Description : One mole feed of a binary mixture of a given composition is flash vaporised at a fixed P and T. If Raoult's law is obeyed, then changing the feed composition would effect (A) ... The fraction vaporised but not the product composition (D) Neither the product composition nor the fraction vaporised

Last Answer : (C) The fraction vaporised but not the product composition

A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m￾xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture? (A) The mixture exhibits an azeotrope at 101.3 kPa (B) The composition of the mixture, in percent by volume is: o-xylene 30, p￾xylene 60. and m-xylene 10 (C) The composition of the mixture in mole percent is: o-xylene 30, p-xylene 60 and m-xyoene 10 (D) The mixture contain optical isomers

Description : A liquid mixture contains 30% o-xylene, 60% p-xylene and 10%. m￾xylene (all percentages in w/w). Which of the following statements would be true in respect of this mixture? (A) The mixture exhibits ... : o-xylene 30, p-xylene 60 and m-xyoene 10 (D) The mixture contain optical isomers

Last Answer : (A) The mixture exhibits an azeotrope at 101.3 kPa

In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Description : In an ideal P.F.R. at steady state conditions (A) The composition of reactants remains constant along a flow path (B) The conversion of the reactant varies from point to point along a flow path (C) There is no lateral mixing of fluid (D) There may be diffusion along the flow path

Last Answer : (B) The conversion of the reactant varies from point to point along a flow path

A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co-efficient and fi° is the fugacity of the pure component i. the Ki value (Yi = Ki xi) is therefore, in general a function of (A) Temperature only (B) Temperature and pressure only (C) Temperature, pressure and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Description : A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co- ... and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Last Answer : (C) Temperature, pressure and liquid composition xi only

The partial molar enthalpy of a component in an ideal binary gas mixture of composition Z, at a temperature T and pressure P, is a function only of (A) T (B) T and P (C) T, P and Z (D) T and Z

Description : The partial molar enthalpy of a component in an ideal binary gas mixture of composition Z, at a temperature T and pressure P, is a function only of (A) T (B) T and P (C) T, P and Z (D) T and Z

Last Answer : (B) T and P

Hot dipping process is used for coating a low melting point metal (e.g. Pb, Sn, Zn) on iron, steel & copper having relatively higher melting points. Which of the following is not a hot dipping process? (A) Galvanising (B) Tinning (C) Sherardizing (D) None of these

Description : Hot dipping process is used for coating a low melting point metal (e.g. Pb, Sn, Zn) on iron, steel & copper having relatively higher melting points. Which of the following is not a hot dipping process? (A) Galvanising (B) Tinning (C) Sherardizing (D) None of these

Last Answer : (C) Sherardizing

Several applications have been suggested to increase the effectiveness of prophylactic application of topical fluoride which include all EXCEPT: A. Increase Fluoride ions in solution “increase concentration” B. Increase PH of fluoride C. Increase exposure time to topical fluoride D. Pre-treat enamel with 0.5% phosphoric acid E. Use NH4F instead of NaF

Description : Several applications have been suggested to increase the effectiveness of prophylactic application of topical fluoride which include all EXCEPT: A. Increase Fluoride ions in solution increase concentration B. Increase ... D. Pre-treat enamel with 0.5% phosphoric acid E. Use NH4F instead of NaF

Last Answer : B. Increase PH of fluoride

Several approaches have been suggested to increase the fixation of professionally applied topical fluoride, which of the following statements IS INCORRECT regarding increasing the fixation? A. Increase concentration of fluoride in solutions B. Raise the PH of the fluoride solution C. Increase the exposure time to topical fluoride D. Pre-treat the enamel with 0.5% phosphoric acid E. Use NH4F rather than NaF at a lower PH

Description : Several approaches have been suggested to increase the fixation of professionally applied topical fluoride, which of the following statements IS INCORRECT regarding increasing the fixation? A. Increase concentration of ... with 0.5% phosphoric acid E. Use NH4F rather than NaF at a lower PH

Last Answer : B. Raise the PH of the fluoride solution

P and Q invest in a business in the ratio 3 : 2. If 5% of the total profit goes to charity and P’s share is Rs. 855, the total profit is: A.Rs. 1435 B.Rs. 1500 C.Rs. 1538 D.Rs. 1580

Description : P and Q invest in a business in the ratio 3 : 2. If 5% of the total profit goes to charity and P’s share is Rs. 855, the total profit is: A.Rs. 1435 B.Rs. 1500 C.Rs. 1538 D.Rs. 1580

Last Answer : Answer- B (Rs.1500) Explanation: Let the total profit be Rs. 100. After paying to charity, A’s share = Rs. 95 x 3/5 = Rs. 57. If A’s share is Rs. 57, total profit = Rs. 100. If A’s share Rs. 855, total profit =(100/57) x 855 = 1500.

A d.c. shunt motor runs at no load speed of 1140 r.p.m. At full load, armature reaction weakens the main flux by 5% whereas the armature circuit voltage drops by 10%. The motor full load speed in r.p.m. is (A) 1080 (B) 1203 (C) 1000 (D) 1200

Description : A d.c. shunt motor runs at no load speed of 1140 r.p.m. At full load, armature reaction weakens the main flux by 5% whereas the armature circuit voltage drops by 10%. The motor full load speed in r.p.m. is (A) 1080 (B) 1203 (C) 1000 (D) 1200

Last Answer : (A) 1080