Choose the condition that must be specified in order to liquify CO2(triple point for CO2is - 57°C and 5.2 atm). (A) Pressure must be kept below 5.2 atm (B) Temperature must be kept above - 57°C (C) Pressure must be kept below 5.2 atm. and temperature must be kept above 57°C (D) Pressure and temperature must be kept below 5.2 atm. and - 57°C respectively

Choose the condition that must be specified in order to liquify CO2(triple point for CO2is - 57°C and 5.2 atm).
(A) Pressure must be kept below 5.2 atm
(B) Temperature must be kept above - 57°C
(C) Pressure must be kept below 5.2 atm. and temperature must be kept above 57°C
(D) Pressure and temperature must be kept below 5.2 atm. and - 57°C respectively
by

1 Answer

Answer :

(D) Pressure and temperature must be kept below 5.2 atm. and - 57°C respectively
by

Related questions

The temperature at which the vapor pressure exactly equals one atm is called _________.  a. boiling temperature  b. normal boiling point  c. triple point  d. point of infliction

Description : The temperature at which the vapor pressure exactly equals one atm is called _________.  a. boiling temperature  b. normal boiling point  c. triple point  d. point of infliction

Last Answer : normal boiling point

Critical temperature is defined as the temperature above which a gas will (A) Not liquify (barring exceptions) (B) Immediately liquify (C) Never liquify however high the pressure may be (D) None of these

Description : Critical temperature is defined as the temperature above which a gas will (A) Not liquify (barring exceptions) (B) Immediately liquify (C) Never liquify however high the pressure may be (D) None of these

Last Answer : (C) Never liquify however high the pressure may be

In which of the following techniques the sample is kept below triple point? (A) Lyophilization (B) Spray drying (C) Spray congealing (D) Centrifugation

Description : In which of the following techniques the sample is kept below triple point? (A) Lyophilization (B) Spray drying (C) Spray congealing (D) Centrifugation

Last Answer : (A) Lyophilization

Which set of conditions represents the easiest way to liquify a gas ? (1) Low temperature and high pressure (2) High temperature and low pressure (3) Low temperature and low pressure (4) High temperature and high pressure

Description : Which set of conditions represents the easiest way to liquify a gas ? (1) Low temperature and high pressure (2) High temperature and low pressure (3) Low temperature and low pressure (4) High temperature and high pressure

Last Answer : Low temperature and high pressure

Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Description : Dust collection efficiency of electrostatic precipitator can be as high as 99.9%. Maximum temperature and pressure of dust laden gas that can be cleaned in an electrostatic precipitator is respectively. (A) 200°C and 5 atm (B) 1000°C and 10 atm (C) 500°C and 50 atm (D) 1000°C and 500 atm

Last Answer : (B) 1000°C and 10 atm

Which of the following is not a condition for drafts to be negotiable? A. must be in writing, signed by the drawer B. must contain a promise to pay a certain sum if goods are received C. must contain an order to pay D. must be payable on sight or at a specified date E. must be made out to order or bearer

Description : Which of the following is not a condition for drafts to be negotiable? A. must be in writing, signed by the drawer B. must contain a promise to pay a certain sum if goods are received C. must contain an ... D. must be payable on sight or at a specified date E. must be made out to order or bearer

Last Answer : B. must contain a promise to pay a certain sum if goods are received

_________ is the temperature to which the air must be cooled, at constant pressure, to produce saturation.  a. relative humidity  b. triple point temperature  c. dew point  d. critical point

Description : _________ is the temperature to which the air must be cooled, at constant pressure, to produce saturation.  a. relative humidity  b. triple point temperature  c. dew point  d. critical point

Last Answer : dew point

Sodium phenoxide reacts with CO2 at 125°C under 5 atm pressure to give salicylic acid. This reaction is called (a) Kolbe's reaction (b) Perkin reaction (c) Wurtz reaction (d) HVZ reaction

Description : Sodium phenoxide reacts with CO2 at 125°C under 5 atm pressure to give salicylic acid. This reaction is called (a) Kolbe's reaction (b) Perkin reaction (c) Wurtz reaction (d) HVZ reaction

Last Answer : Kolbe's reaction

If a1 and a2 are the relative volatilities when the pressure in the distillation column is 1 and 2 atm respectively. Pick out the correct statement. (A) a1 = a2 (B) a1 = 2a2 (C) a1 = 0.5 a2 (D) None of these

Description : If a1 and a2 are the relative volatilities when the pressure in the distillation column is 1 and 2 atm respectively. Pick out the correct statement. (A) a1 = a2 (B) a1 = 2a2 (C) a1 = 0.5 a2 (D) None of these

Last Answer : (D) None of these

Using the phase diagram for CO2, what phase is carbon dioxide in at 12 atm pressure and -40 C apex?

Description : Using the phase diagram for CO2, what phase is carbon dioxide in at 12 atm pressure and -40 C apex?

Last Answer : liquid

Using the phase diagram for CO2, what phase is carbon dioxide in at 12 atm pressure and -40 C apex?

Description : Using the phase diagram for CO2, what phase is carbon dioxide in at 12 atm pressure and -40 C apex?

Last Answer : liquid

Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control)c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Description : Choose the Protocols working in the Data Link Control Layer of OSI model below. a. ATM (Asynchronous Transfer Mode), Frame Relay b. HDLC (High Level Data Link Control), SDLC (Synchronous Data Link Control) c. ARP (Address Resolution Protocol), IEEE802.3 d. All the above

Last Answer : d. All the above

Write various means to easily liquify the gases.

Description : Write various means to easily liquify the gases.

Last Answer : Ans. By lowering the temperature and increasing the pressure.

Operating condition in the electrical dehydrators for crude oil is about (A) 6.5 kgf/Cm2 & 95°C (B) 1 atm. & 110 °C (C) 20 kgf/cm2 & 110°C (D) 50 atm. and 150°C

Description : Operating condition in the electrical dehydrators for crude oil is about (A) 6.5 kgf/Cm2 & 95°C (B) 1 atm. & 110 °C (C) 20 kgf/cm2 & 110°C (D) 50 atm. and 150°C

Last Answer : (A) 6.5 kgf/Cm2 & 95°C

At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm.) and the gas behaves ideally.) (A) μ° + RT ln f (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Description : At equilibrium condition, the chemical potential of a material in different phases in contact with each other is equal. The chemical potential for a real gas (μ) is given by (where, μ = standard chemical potential at unit fugacity (f° = 1 atm. ... (B) μ°+ R ln f (C) μ° + T ln f (D) μ° + R/T ln f

Last Answer : (A) μ° + RT ln f

Pick out the wrong statement. (A) In a multistep reaction, the slowest step is the rate determining step (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature (C) Slow chemical reactions have generally high values of activation energy (D) Molecularity of a reaction cannot be zero but the order of a reaction can be zero

Description : Pick out the wrong statement. (A) In a multistep reaction, the slowest step is the rate determining step (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature (C ... energy (D) Molecularity of a reaction cannot be zero but the order of a reaction can be zero

Last Answer : (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature

Pressure & temperature maintained in catalytic cracking is about (A) 2 atm & 500°C (B) 10 atm & 500°C (C) 30 atm & 200°C (D) 50 atm & 750°C

Description : Pressure & temperature maintained in catalytic cracking is about (A) 2 atm & 500°C (B) 10 atm & 500°C (C) 30 atm & 200°C (D) 50 atm & 750°C

Last Answer : (A) 2 atm & 500°C

Temperature and pressure in ammonia converter is (A) 200 atm, 1000°C (B) 450 atm, 200°C (C) 450 atm, 550°C (D) 450 atm, 1000°C

Description : Temperature and pressure in ammonia converter is (A) 200 atm, 1000°C (B) 450 atm, 200°C (C) 450 atm, 550°C (D) 450 atm, 1000°C

Last Answer : (C) 450 atm, 550°C

Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Description : Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Last Answer : (B) 190°C and 200 atm

In sulphate pulp manufacture, the pressure and temperature in the digestor is (A) 10 atm., 800 °C (B) 10 atm., 170-180°C (C) 1 atm., 170 - 180°C (D) 1 atm., 800°C

Description : In sulphate pulp manufacture, the pressure and temperature in the digestor is (A) 10 atm., 800 °C (B) 10 atm., 170-180°C (C) 1 atm., 170 - 180°C (D) 1 atm., 800°C

Last Answer : (B) 10 atm., 170-180°C

Nitrobenzene (boiling point = 210.6°C) is steam distilled at 1 atm pressure. Nitrobenzene will distil off __________ °C. (A) At < 100 (B) At > 210.6 (C) Between 100 and 210 (D) None of these

Description : Nitrobenzene (boiling point = 210.6°C) is steam distilled at 1 atm pressure. Nitrobenzene will distil off __________ °C. (A) At < 100 (B) At > 210.6 (C) Between 100 and 210 (D) None of these

Last Answer : (A) At < 100

At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Description : At triple point (for one component system), vapour pressure of solid as compared to that of liquid will be (A) More (B) Less (C) Same (D) More or less; depending on the system

Last Answer : (C) Same

If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Description : If we increase the pressure on a substance (which is at its triple point), then the triple point (A) Increases (B) Decreases (C) Remains unchanged (D) May increase or decrease; depends on the substance

Last Answer : (C) Remains unchanged

The size of mould for bricks, is generally kept (A) A little large to specified size (B) A little small to specified size (C) Equal to specified size (D) 10% larger than specified size

Description : The size of mould for bricks, is generally kept (A) A little large to specified size (B) A little small to specified size (C) Equal to specified size (D) 10% larger than specified size

Last Answer : Answer: Option A

The temperature at which both liquid and gas phases are identical, is called the __________ point. (A) Critical (B) Triple (C) Freezing (D) Boiling

Description : The temperature at which both liquid and gas phases are identical, is called the __________ point. (A) Critical (B) Triple (C) Freezing (D) Boiling

Last Answer : (A) Critical

In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the same NOR and NAND inputs D. have output conditions that are exact opposites to the output condition for OR and AND, respectively

Description : In a logic circuit the NOR and NAND gate functions ____________. A. must be accomplished with a common base transistor arrangement B. are available in diode form C. are exact opposites with the ... . have output conditions that are exact opposites to the output condition for OR and AND, respectively

Last Answer : Answer: D

Choose the wrong statement (a) Temperature of medium being cooled must be below that of the evaporator (b) Refrigerant leaves the condenser as liquid (c) All solar thermally operated absorption systems are capable only of intermittent operation (d) frost on evaporator reduces heat transfer

Description : Choose the wrong statement (a) Temperature of medium being cooled must be below that of the evaporator (b) Refrigerant leaves the condenser as liquid (c) All solar thermally operated absorption systems are capable only of intermittent operation (d) frost on evaporator reduces heat transfer

Last Answer : Ans: a

What is the perfect condition for dehumidification of air? A. air is heated above its dew point temperature B. air is cooled up to its dew point temperature C. air is heated below its dew point temperature D. air is cooled below its dew point temperature

Description : What is the perfect condition for dehumidification of air? A. air is heated above its dew point temperature B. air is cooled up to its dew point temperature C. air is heated below its dew point temperature D. air is cooled below its dew point temperature

Last Answer : ANSWER : D

What is the pressure of the air, in atm, in the lungs when the gas expands to 175.0 mL at a body temperature of 37 ∘C, and the amount of gas remains constant?

Description : What is the pressure of the air, in atm, in the lungs when the gas expands to 175.0 mL at a body temperature of 37 ∘C, and the amount of gas remains constant?

Last Answer : I don’t understand the question

A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Description : A cylinder contains oxygen at a pressure of 10 atm and a temperature of 300 K. The volume of the cylinder is 10 liters. What is the mass of the oxygen in grams? Molecular weight (MW) of oxygen is 32 g/mole?  a. 125.02  b. 130.08  c. 135.05  d. 120.04

Last Answer : 130.08 {(10atm)(10)(32)/(0.0821) (300K)}

For the process : `H_(2)O (l, 1 atm, 373 K) rArr H_(2)O(g, 1 atm, 373 K)` [Given normal boiling point of water `= 373` K at 1 atm pressure.] The corre

Description : For the process : `H_(2)O (l, 1 atm, 373 K) rArr H_(2)O(g, 1 atm, 373 K)` [Given normal boiling point of water `= 373` K at 1 atm pressure.] The corre

Last Answer : For the process : `H_(2)O (l, 1 atm, 373 K) rArr H_(2)O(g, 1 atm, 373 K)` [Given normal boiling ... lt 0, DeltaU gt 0, Delta H = 0` D. none of these

The rated loads of lifting cranes, as percentage of tipping load at specified radius, for crawlermounted and pneumatic tyre-mounted machines would be respectively (A) 80 and 90 (B) 90 and 80 (C) 85 and 75 (D) 75 and 83

Description : The rated loads of lifting cranes, as percentage of tipping load at specified radius, for crawlermounted and pneumatic tyre-mounted machines would be respectively (A) 80 and 90 (B) 90 and 80 (C) 85 and 75 (D) 75 and 83

Last Answer : (D) 75 and 83

1. Where did India play its 1st one day international match? 2. Which is the largest Public Sector Bank in India? 3. If CO2 concentration in the blood increases, what will breathing? 4. If the dew point is below freezing, it is referred to which point? 5. Where are the Relics of Buddha preserved?

Description : 1. Where did India play its 1st one day international match? 2. Which is the largest Public Sector Bank in India? 3. If CO2 concentration in the blood increases, what will breathing? 4. If ... Which type of coal represents the first stage of formation of coal? 20. Which Sikh Guru fought Mughals?

Last Answer : Answer : 1. Headingley 2. State Bank of India 3. Increase 4. Frost point 5. In Stupa 6. By the test of reasonableness 7. 6500 k 8. Badminton 9. Zonda 10. Kalidasa 11. 1948 12. Liver 13. 1959 14. Foehn 15. Karpurmanjari 16. Zinc 17. RBI 18. Gonds 19. Peat 20. Guru Gobind Singh

The sequence of absorption in flue gas analysis by Orsat's apparatus is respectively (A) CO2 , O2 , CO (B) CO, O2 , CO2 (C) CO2 , CO, O2

Description : The sequence of absorption in flue gas analysis by Orsat's apparatus is respectively (A) CO2 , O2 , CO (B) CO, O2 , CO2 (C) CO2 , CO, O2

Last Answer : (A) CO2 , O2 , CO

In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Description : In an operating distillation column, the (A) Vapors and liquids are at their dew point and bubble point respectively (B) Driving force for the liquid flow is its specific weight (C) Driving force for ... bottom to the top of the column (D) Highest temperature is encountered at the top of the column

Last Answer : (C) Driving force for the vapor flow is the pressure drop, as the pressure decreases gradually from the bottom to the top of the column

An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively. The humidity of air sample expressed as kg of water vapour/kg of dry air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Description : An air-water vapour mixture has a dry bulb temperature of 60°C and a dew point temperature of 40°C. The total pressure is 101.3 kPa and the vapour pressure of water at 40°C and 60°C are 7.30 kPa and 19.91 kPa respectively ... air is: (A) 0.048 (B) 0.079 (C) 0.122 (D) 0.152

Last Answer : (D) 0.152

If an air parcel is warmer than the air at the specified altitude then the parcel will continue to rise because warmer air is less dense and therefore buoyant. This condition best describes what?

Description : If an air parcel is warmer than the air at the specified altitude then the parcel will continue to rise because warmer air is less dense and therefore buoyant. This condition best describes what?

Last Answer : Need answer

Width of frequency band just enough to ensure the transmission of information at a required rate and quality required, and under a specified condition and class of emission. A. Occupied bandwidth B. Transmission bandwidth C. Necessary bandwidth D. Frequency bandwidth

Description : Width of frequency band just enough to ensure the transmission of information at a required rate and quality required, and under a specified condition and class of emission. A. Occupied bandwidth B. Transmission bandwidth C. Necessary bandwidth D. Frequency bandwidth

Last Answer : C. Necessary bandwidth

The width of the frequency band which is just sufficient to ensure the transmission of information at the rate and with the quality required under a specified condition and class of emission. A. Occupied bandwidth B. Reference frequency C. Necessary bandwidth D. Frequency tolerance bandwidth

Description : The width of the frequency band which is just sufficient to ensure the transmission of information at the rate and with the quality required under a specified condition and class of emission. A. Occupied bandwidth B. Reference frequency C. Necessary bandwidth D. Frequency tolerance bandwidth

Last Answer : C. Necessary bandwidth

What causes the specified condition to shift position?

Description : What causes the specified condition to shift position?

Last Answer : The input, or clock pulse.

Which one of the following is not a definition of error ? (A) It refers to the discrepancy between a computed, observed or measured value and the true, specified or theoretically correct value. (B) It refers to the actual output of a software and the correct output. (C) It refers to a condition that causes a system to fail. (D) It refers to human action that results in software containing a defect or fault.

Description : Which one of the following is not a definition of error ? (A) It refers to the discrepancy between a computed, observed or measured value and the true, specified or theoretically correct value. (B) It ... to fail. (D) It refers to human action that results in software containing a defect or fault. 

Last Answer : The input, or clock pulse.

What is the temperature of the triple point ?

Last Answer : : The temperature of the triple point is 273.15K

Clapeyron equation is applicable for registration at (a) saturation point of vapour (b) saturation point of liquid (c) sublimation temperature (d) triple point.

Description : Clapeyron equation is applicable for registration at (a) saturation point of vapour (b) saturation point of liquid (c) sublimation temperature (d) triple point.

Last Answer : Ans: a

What temperature scale is identical to the Kelvin scale?  A. Ideal gas temperature scale  B. Ideal temperature scale  C. Absolute gas temperature scale  D. Triple point temperature scale

Description : What temperature scale is identical to the Kelvin scale?  A. Ideal gas temperature scale  B. Ideal temperature scale  C. Absolute gas temperature scale  D. Triple point temperature scale

Last Answer : Ideal gas temperature scale

From below, choose the condition for the axisymmetric element. a.Symmetric about axis b.Boundary conditions are symmetric about an axis c.Loading conditions are symmetric about an axis d.All the above

Description : From below, choose the condition for the axisymmetric element. a.Symmetric about axis b.Boundary conditions are symmetric about an axis c.Loading conditions are symmetric about an axis d.All the above

Last Answer : d.All the above

Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Description : Initial pressure of oxygen introduced into the 'bomb' of the bomb calorimeter for determination of calorific value of coal/fuel oil may be around __________ atm. (A) 3-5 (B) 25-30 (C) 60-65 (D) 95-100

Last Answer : (B) 25-30

The activity of pure hydrogen gas at 1000°C and 5 atm pressure (A) Is always less than 1 (B) Is always greater than 1 (C) Can be 5 (D) Depends on the choice of the standard state

Description : The activity of pure hydrogen gas at 1000°C and 5 atm pressure (A) Is always less than 1 (B) Is always greater than 1 (C) Can be 5 (D) Depends on the choice of the standard state

Last Answer : (D) Depends on the choice of the standard state

In order to achieve economy, the spacing of stirrups at mid span section---------- compared to that of support section [ A ] May be decreased [ B ] May be increased [ C ] Must be kept equal [ D ] None of the above.

Description : In order to achieve economy, the spacing of stirrups at mid span section---------- compared to that of support section [ A ] May be decreased [ B ] May be increased [ C ] Must be kept equal [ D ] None of the above.

Last Answer : [ B ] May be increased