Sudden temperature fluctuation does not affect pyrex glass, because of its (A) Low co-efficient of expansion (B) High co-efficient of expansion (C) High melting point (D) Both (B) and (C)

Sudden temperature fluctuation does not affect pyrex glass, because of
its
(A) Low co-efficient of expansion
(B) High co-efficient of expansion
(C) High melting point
(D) Both (B) and (C)
by

1 Answer

Answer :

(A) Low co-efficient of expansion
by

Related questions

Superior quality laboratory apparatus is made of the __________ glass having low thermal co-efficient of expansion & high chemical resistance. (A) Flint (B) Soda (C) Pyrex (D) Potash

Description : Superior quality laboratory apparatus is made of the __________ glass having low thermal co-efficient of expansion & high chemical resistance. (A) Flint (B) Soda (C) Pyrex (D) Potash

Last Answer : (C) Pyrex

__________ glass has the lowest co-efficient of thermal expansion and hence is more heat resistant. (A) Pyrex (B) Soda lime (C) Lead (D) High silica

Description : __________ glass has the lowest co-efficient of thermal expansion and hence is more heat resistant. (A) Pyrex (B) Soda lime (C) Lead (D) High silica

Last Answer : (A) Pyrex

Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Description : Pick out the wrong statement pertaining to the properties of glasses. Glasses generally have (A) High electrical insulation properties (B) Sharp melting points (C) Low co-efficient of thermal expansion (D) Compressive strength much greater than their tensile strengths

Last Answer : (B) Sharp melting points

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) The acoustical boards prepared by impregnating fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Description : Pick up the correct statement from the following: (A) Plastics have generally low melting point (B) The coefficient of thermal expansion of plastics is about three times than that of steel (C) ... fibre-glass with phenolic resins has absorption coefficient of about 0.67 (D) All the above

Last Answer : Answer: Option D

Co-efficient of thermal expansion of glass is decreased by the addition of __________ during its manufacture. (A) CaO (B) MnO2 (C) ZnO (D) FeS

Description : Co-efficient of thermal expansion of glass is decreased by the addition of __________ during its manufacture. (A) CaO (B) MnO2 (C) ZnO (D) FeS

Last Answer : (C) ZnO

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

Which of the following is universally employed as the low expansion metal in the bimetallic thermometer, which is an iron-nickel alloy containing 36% nickel and has very low co-efficient of expansion (1/20th of ordinary metals) ? (A) Invar (B) Constantan (C) Chromel (D) Alumel

Description : Which of the following is universally employed as the low expansion metal in the bimetallic thermometer, which is an iron-nickel alloy containing 36% nickel and has very low co-efficient of expansion (1/20th of ordinary metals) ? (A) Invar (B) Constantan (C) Chromel (D) Alumel

Last Answer : (A) Invar

Metallic surveying tapes are made of __________ which has a low co efficient of expansion & enough strength. (A) Invar (B) Hastelloy (C) Duralumin (D) Monel metal

Description : Metallic surveying tapes are made of __________ which has a low co efficient of expansion & enough strength. (A) Invar (B) Hastelloy (C) Duralumin (D) Monel metal

Last Answer : (A) Invar

Centrifugal pump made of pyrex or glass can't be used to pump (A) Milk and fruit juices (B) Alkaline solutions (C) Dilute H2SO4 at room temperature (D) Brine

Description : Centrifugal pump made of pyrex or glass can't be used to pump (A) Milk and fruit juices (B) Alkaline solutions (C) Dilute H2SO4 at room temperature (D) Brine

Last Answer : (B) Alkaline solutions

Steel rods are normally used for concrete reinforcement because concrete and steel have almost equal (A) Tensile strength (B) Compressive strength (C) Young's modulus (D) Thermal co-efficient of expansion

Description : Steel rods are normally used for concrete reinforcement because concrete and steel have almost equal (A) Tensile strength (B) Compressive strength (C) Young's modulus (D) Thermal co-efficient of expansion

Last Answer : (D) Thermal co-efficient of expansion

It is not preferable to use superheated steam in evaporators, because of its very (A) High temperature (B) High pressure (C) Low film co-efficient (D) None of these

Description : It is not preferable to use superheated steam in evaporators, because of its very (A) High temperature (B) High pressure (C) Low film co-efficient (D) None of these

Last Answer : (C) Low film co-efficient

When hot liquid is poured into a thick glass tumbler, it cracks because glass – (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Description : When hot liquid is poured into a thick glass tumbler, it cracks because glass – (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Last Answer : (1) is a bad conductor of heat so only inner surface expands Explanation: When hot liquid is poured into a thick glass tumbler, it cracks because glass is a bad conductor of heat so only inner surface expands.

When hot liquid is poured into a thick glass tumbler, it cracks because glass : (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Description : When hot liquid is poured into a thick glass tumbler, it cracks because glass : (1) is a bad conductor of heat so only inner surface expands (2) has high temperature coefficient of expansion (3) has a very low specific heat (4) has low temperature coefficient of expansion

Last Answer :  is a bad conductor of heat so only inner surface expands 

The type of high refractive index glass used in optical instruments is __________ glass. (A) Pyrex (B) Flint (C) Crookes (D) None of these

Description : The type of high refractive index glass used in optical instruments is __________ glass. (A) Pyrex (B) Flint (C) Crookes (D) None of these

Last Answer : (B) Flint

A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Description : A steel alloy containing 36% nickel is called __________, which has a zero co-efficient of expansion. (A) Austenitic stainless steel (B) Heat resisting steel (C) Invar (D) High speed steel

Last Answer : (C) Invar

The energy loss in flow through Venturimeter is less than that through flow nozzle, because in case of a flow nozzle, the (A) Length is shorter (B) Throat diameter is more (C) Sudden expansion of flow in the downstream occurs (D) Distance between the throat and the inlet is more

Description : The energy loss in flow through Venturimeter is less than that through flow nozzle, because in case of a flow nozzle, the (A) Length is shorter (B) Throat diameter is more (C) Sudden expansion of flow in the downstream occurs (D) Distance between the throat and the inlet is more

Last Answer : (C) Sudden expansion of flow in the downstream occurs

Electric bulbs are made of __________ glass. (A) Jena (B) Flint (C) Crookes (D) Pyrex

Description : Electric bulbs are made of __________ glass. (A) Jena (B) Flint (C) Crookes (D) Pyrex

Last Answer : (B) Flint

Basic oxide is absent in __________ glass. (A) Flint (B) Pyrex (C) Quartz (D) All (A), (B) & (C)

Description : Basic oxide is absent in __________ glass. (A) Flint (B) Pyrex (C) Quartz (D) All (A), (B) & (C)

Last Answer : (C) Quartz

Commonly used glass is known as the __________ glass. (A) Flint (B) Hard (C) Pyrex (D) Soda

Description : Commonly used glass is known as the __________ glass. (A) Flint (B) Hard (C) Pyrex (D) Soda

Last Answer : (D) Soda

The main component of Pyrex glass is (A) Zinc (B) Lead (C) Boron (D) Selenium

Description : The main component of Pyrex glass is (A) Zinc (B) Lead (C) Boron (D) Selenium

Last Answer : (B) Lead

__________ glass is used for the manufacture of optical glass. (A) Pyrex (B) Soda (C) Flint (D) Crooke's

Description : __________ glass is used for the manufacture of optical glass. (A) Pyrex (B) Soda (C) Flint (D) Crooke's

Last Answer : (C) Flint

(1/V) (∂V/∂T)Pis the mathematical expression (A) Joule-Thomson co-efficient (B) Specific heat at constant pressure (Cp) (C) co-efficient of thermal expansion (D) Specific heat at constant volume (CV)

Description : (1/V) (∂V/∂T)Pis the mathematical expression (A) Joule-Thomson co-efficient (B) Specific heat at constant pressure (Cp) (C) co-efficient of thermal expansion (D) Specific heat at constant volume (CV)

Last Answer : (C) co-efficient of thermal expansion

The expression, nCv(T2- T1), is for the __________ of an ideal gas. (A) Work done under adiabatic condition (B) Co-efficient of thermal expansion (C) Compressibility (D) None of these

Description : The expression, nCv(T2- T1), is for the __________ of an ideal gas. (A) Work done under adiabatic condition (B) Co-efficient of thermal expansion (C) Compressibility (D) None of these

Last Answer : (A) Work done under adiabatic condition

Out of the following refrigeration cycles, which one has the minimum COP (Co-efficient of performance)? (A) Air cycle (B) Carnot cycle (C) Ordinary vapour compression cycle (D) Vapour compression with a reversible expansion engine

Description : Out of the following refrigeration cycles, which one has the minimum COP (Co-efficient of performance)? (A) Air cycle (B) Carnot cycle (C) Ordinary vapour compression cycle (D) Vapour compression with a reversible expansion engine

Last Answer : A) Air cycle

The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

Description : The expression, nRT ln(P1/P2), is for the __________of an ideal gas. (A) Compressibility (B) Work done under adiabatic condition (C) Work done under isothermal condition (D) Co-efficient of thermal expansion

Last Answer : C) Work done under isothermal condition

Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Description : Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Last Answer : (B) Flexibility possible in the baffle arrangement

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

In a shell and tube heat exchanger, floating head is used for (A) Large temperature differentials (B) High heat transfer co-efficient (C) Low pressure drop (D) Less corrosion of tubes

Description : In a shell and tube heat exchanger, floating head is used for (A) Large temperature differentials (B) High heat transfer co-efficient (C) Low pressure drop (D) Less corrosion of tubes

Last Answer : (A) Large temperature differentials

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Pick out the wrong statement. (A) Surface tension of a liquid is because of the difference in magnitude of adhesive & cohesive forces(B) A hydrometer used for the determination of specific gravities of liquidsworks on the principle of buoyant forces(C) In case of unsteady fluid flow, the velocity at any given point does notchange with time(D) Turbulent fluid flow is characterised by the rapid fluctuation ofinstantaneous pressure & velocity at a poin

Description : Pick out the wrong statement. (A) Surface tension of a liquid is because of the difference in magnitude of adhesive & cohesive forces (B) A hydrometer used for the determination of ... Turbulent fluid flow is characterised by the rapid fluctuation of instantaneous pressure & velocity at a poin

Last Answer : (C) In case of unsteady fluid flow, the velocity at any given point does not change with time

Is pyrex just tempered glass, or is there anything else in it?

Description : Is pyrex just tempered glass, or is there anything else in it?

Last Answer : The heat resistant quality

Which of the following is responsible for the extra strength of pyrex glass? (1) Potassium Carbonate (2) Lead Oxide (3) Borax (4) Ferric Oxide

Description : Which of the following is responsible for the extra strength of pyrex glass? (1) Potassium Carbonate (2) Lead Oxide (3) Borax (4) Ferric Oxide

Last Answer : (3) Borax Explanation: Older clear-glass Pyrex manufactured by Corning before 1998, Arc International's Pyrex products, and Pyrex laboratory glassware is made of borosilicate glass. According ... glass cookware manufactured by World Kitchen is made of tempered sodalime glass instead of borosilicate.

Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Description : Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Last Answer : (4) Fibre glass Explanation: Fiberglass is a lightweight, extremely strong, and robust material. Although strength properties are somewhat lower than carbon fiber and it is less stiff, the material ... also very favorable when compared to metals, and it can be easily formed using molding processes.

Which one of the following types of glass can cut off ultraviolet rays? (1) Soda glass (2) Pyrex glass (3) Jena glass (4) Crookes glass

Description : Which one of the following types of glass can cut off ultraviolet rays? (1) Soda glass (2) Pyrex glass (3) Jena glass (4) Crookes glass

Last Answer : (4) Crookes glass Explanation: In this glass mainly cerium oxide (CiO2) is present which sharply absorbs the ultraviolet rays from the sunlight so utilized in making lenses of eye glasses.

Which variety of glass is heat resistant? (1) Hard glass (2) Flint glass (3) Pyrex glass (4) Bottle glas

Description : Which variety of glass is heat resistant? (1) Hard glass (2) Flint glass (3) Pyrex glass (4) Bottle glas

Last Answer : (3) Pyrex glass Explanation: Older clear-glass Pyrex manufactured by Corning, Arc International's Pyrex products, and Pyrex laboratory glassware are made of borosilicate glass.

Lens is made up of – (1) Pyrex glass (2) Flint glass (3) Ordinary glass (4) Cobalt glass

Description : Lens is made up of – (1) Pyrex glass (2) Flint glass (3) Ordinary glass (4) Cobalt glass

Last Answer : (2) Flint glass Explanation: Flint glass is optical glass that has relatively high refractive index and low Abbe number (high dispersion). A concave lens of flint glass is commonly ... doublet lens because of their compensating optical properties, which reduces chromatic aberration (colour defects).

Which one of the following is used for sun glasses? (1) Pyrex glass (2) Flint glass (3) Crooks glass (4) Crystal glass

Description : Which one of the following is used for sun glasses? (1) Pyrex glass (2) Flint glass (3) Crooks glass (4) Crystal glass

Last Answer : (3) Crooks glass Explanation: A type of glass that contains cerium and other rare earths and has a high absorption of ultraviolet radiation is used in sunglasses. Sunglasses or sun glasses ... as variously termed spectacles or glasses exist, featuring lenses that are coloured, polarized or darkened.

Which of the following is responsible for extra strength of Pyrex glass?

Description : Which of the following is responsible for extra strength of Pyrex glass?

Last Answer : Borax

The glass known as Pyrex?

Description : The glass known as Pyrex?

Last Answer : Borosilicate glass

Which variety of glass is heat resistant? A. Bottle glass B. Flint glass C. Hard glass D. Pyrex glass (Answer)

Description : Which variety of glass is heat resistant? A. Bottle glass B. Flint glass C. Hard glass D. Pyrex glass (Answer)

Last Answer : D. Pyrex glass (Answer)

Which of the following is responsible for the extra strength of pyrex glass ? (1) Potassium Carbonate (2) Lead Oxide (3) Borax (4) Ferric Oxide

Description : Which of the following is responsible for the extra strength of pyrex glass ? (1) Potassium Carbonate (2) Lead Oxide (3) Borax (4) Ferric Oxide

Last Answer : Borax

Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Description : Which type of glass is used for making glass reinforced plastic? (1) Pyrex glass (2) Flint glass (3) Quartz glass (4) Fibre glass

Last Answer : Fibre glass

Heat resistant variety of glass is— (1) Pyrex glass (2) Hard glass (3) Flint glass (4) None of these

Description : Heat resistant variety of glass is— (1) Pyrex glass (2) Hard glass (3) Flint glass (4) None of these

Last Answer :  Flint glass

Lens is made up of (1) Pyrex glass(2) Flint glass (3) Ordinary glass (4) Cobalt glass

Description : Lens is made up of (1) Pyrex glass(2) Flint glass (3) Ordinary glass (4) Cobalt glass

Last Answer : Flint glass

Which one of the following is used for sun glasses ? (1) Pyrex glass (2) Flint glass (3) Crooks glass (4) Crystal glass

Description : Which one of the following is used for sun glasses ? (1) Pyrex glass (2) Flint glass (3) Crooks glass (4) Crystal glass

Last Answer : Crooks glass

Babbitt metal used for making bearings should have (A) High co-efficient of friction between journal and bearing (B) Ability to retain lubricant on its surface (C) Low co-efficient of friction between journal and bearing (D) Both (B) & (C)

Description : Babbitt metal used for making bearings should have (A) High co-efficient of friction between journal and bearing (B) Ability to retain lubricant on its surface (C) Low co-efficient of friction between journal and bearing (D) Both (B) & (C)

Last Answer : (A) High co-efficient of friction between journal and bearing

Concrete containing (A) Siliceous aggregates, has higher co-efficient of expansion (B) Igneous aggregates, has intermediate coefficient of expansion (C) Lime stones, has lowest co-efficient of expansion (D) All the above

Description : Concrete containing (A) Siliceous aggregates, has higher co-efficient of expansion (B) Igneous aggregates, has intermediate coefficient of expansion (C) Lime stones, has lowest co-efficient of expansion (D) All the above

Last Answer : Answer: Option D

For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Description : For aluminium, as compared to copper, all the following factors have higher values except (a) specific volume (6) electrical conductivity (c) co-efficient of linear expansion (d) resistance per unit length for same cross-section

Last Answer : (6) electrical conductivity