Number of phases in a colloidal system is:
(A) 1
(B) 2
(C) 3
(D) 4

1 Answer

Answer :

(B) 2

Related questions

Description : Minimum number of phases that exists in a system is 1. Number of chemical species in a colloidal system is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (B) 2

Description : (4) Water drops in a dispersion medium of air Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... or gas. Cloud is a colloidal dispersion of Water drops in a dispersion medium of air.

Last Answer : Conduction band electrons have more mobility than holes because they – (1) are lighter (2) experience collision less frequently (3) have negative charge (4) need less energy to move them

Description : (2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Last Answer : The presence of ozone in the stratosphere is responsible for – (1) increasing the average global temperature in recent years (2) higher rate of photosynthesis (3) checking the penetration of ultra-violet rays to the earth (4) supplying oxygen for people travelling in jets

Description : (2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Last Answer : The presence of ozone in the stratosphere is responsible for – (1) increasing the average global temperature in recent years (2) higher rate of photosynthesis (3) checking the penetration of ultra-violet rays to the earth (4) supplying oxygen for people travelling in jets

Description : The minimum number of phases that can exist in a system is (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

Description : Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b

Last Answer : (C) Both ‘a’ & ‘b

Description : Colloidal mills are used for __________ grinding. (A) Coarse (B) Intermediate (C) Fine (D) Ultrafine

Last Answer : (D) Ultrafine

Description : Ultra centrifuges are used for the separation of __________ solid particles. (A) Coarse (B) Fine (C) Colloidal (D) Dissolved

Last Answer : (C) Colloidal

Description : Which of the following is not a manufactured fuel? (A) Coke breeze (B) Soft coke (C) Colloidal fuels (D) Charcoal

Last Answer : (A) Coke breeze

Description : Which of the following is not a 'manufactured' fuel? (A) LPG (B) Coal briquettes (C) Tar (D) Colloidal fuels

Last Answer : (C) Tar

Description : Non-colloidal solution is an example of the __________ fluid. (A) Non-Newtonian (B) Newtonian (C) Dilatent (D) Pseudo-plastic

Last Answer : (B) Newtonian

Description : Which of the following is a Newtonian fluid? (A) Rubber latex (B) Sewage sludge (C) Quicksand (D) Non-colloidal solution

Last Answer : (D) Non-colloidal solution

Description : Which of the following is the most efficient for removal of very finely divided suspended solids and colloidal matter from the polluted waterstream? (A) Sedimentation tank (B) Circular clarifier (C) Mechanical flocculation (D) Chemical coagulation

Last Answer : (D) Chemical coagulation

Description : Very fine suspended and colloidal impurities are removed from water by a process called (A) Sedimentation (B) Coagulation (C) Disinfection (D) Softening

Last Answer : (B) Coagulation

Description : Hydrazine is used in water treatment for the removal of (A) Colloidal impurities (B) Dissolved oxygen (C) Turbidity (D) Chlorinous taste

Last Answer : (B) Dissolved oxygen

Description : Aerosol is a system of colloidal particles having a size of

Last Answer : Aerosol is a system of colloidal particles having a size of A. `5mum` B. `1-2 mum` C. less than `100 mum` D. more than `10 mum`

Description : Assertion :- A gas mixed with another gas forms a colloidal solution. Reason :- Mixture of gases is homogenous system.

Last Answer : Assertion :- A gas mixed with another gas forms a colloidal solution. Reason :- Mixture of gases is ... . D. If both Assertion & Reason are False.

Description : Fog is a colloidal system of :-

Last Answer : Fog is a colloidal system of :- A. gas in liquid B. liquid in gas C. gas in gas D. gas in solid

Description : The colloidal system in which the disperse phase and dispersion medium are both liquids is known as :

Last Answer : The colloidal system in which the disperse phase and dispersion medium are both liquids is known as : A. an emulsion B. an areosol C. gel D. a foam

Description : The colloidal system consisting of a liquid dispersed in a solid dispersion medium is termed as :

Last Answer : The colloidal system consisting of a liquid dispersed in a solid dispersion medium is termed as : A. aerosol B. foam C. emulsion D. gel

Description : Liquid-liquid colloidal system is known as

Last Answer : Liquid-liquid colloidal system is known as A. aerosol B. foam C. emulsion D. gel

Description : A colloidal system in which a liquid is dispersed in a liquid is called – (1) gel (2) emulsion (3) sol (4) precipitate

Last Answer : (2) emulsion Explanation: An emulsion is a mixture of two or more liquids that are normally immiscible (nonmixable or unblendable). Emulsions are part of a more general class of two-phase ... ). Examples of emulsions include vinaigrettes, milk, mayonnaise, and some cutting fluids for metal working.

Description : An aerosol is a colloidal system of a?

Last Answer : solid dispersed in gas

Description : A colloidal system in which a liquid is dispersed in a liquid is called (1) gel (2) emulsion (3) sol (4) precipitate

Last Answer : emulsion

Description : Milk is a colloidal system in which: (1) Water is dispersed in fat (2) Fat is dispersed in water (3) Fat and water are dispersed in each other (4) Fat is dissolved

Last Answer : Fat is dispersed in water

Description : The protecting power of lyophilic colloidal sol is expressed in terms of (1) Oxidation number (2) Coagulation value (3) Gold number (4) Critical miscelle concentration

Last Answer : Gold number

Description : When liquid and vapour phase of multi-component system are in equilibrium (at a given temperature and pressure), then chemical potential of each component is (A) Same in both the phases (B) Zero in both the phases (C) More in vapour phase (D) More in liquid phase

Last Answer : (A) Same in both the phases

Description : Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of ... is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Last Answer : (D) The eccentric factor for all materials is always more than one

Description : When liquid and vapour phases of one component system are in equilibrium (at a given temperature and pressure), the molar free energy is (A) More in vapour phase (B) More in liquid phase (C) Same in both the phases (D) Replaced by chemical potential which is more in vapour phase

Last Answer : (C) Same in both the phases

Description : The necessary condition for phase equilibrium in a multiphase system of N components is that the (A) Chemical potentials of a given component should be equal in all phases (B) Chemical potentials of all ... potentials of any given component in all the phases should be the same (D) None of these

Last Answer : (A) Chemical potentials of a given component should be equal in all phases

Description : Fugacity is a measure of the (A) Escaping tendencies of the same substance in different phases of a system (B) Relative volatility of a mixture of two miscible liquids (C) Behaviour of ideal gases (D) None of these

Last Answer : (A) Escaping tendencies of the same substance in different phases of a system

Description : In liquid-liquid extraction, the number of phases at plait point is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (A) 1

Description : The speed of a three-phase squirrel-cage induction-type motor operating in a fixed frequency system is varied by changing the _____________. A. number of phases to the motor B. number of stator poles C. locked rotor current D. resistance of the rotor winding

Last Answer : Answer: B

Description : Colloidal gold: do you use it , what do you use it for and does it work?

Last Answer : This took me four seconds.

Description : Assertion Colloidal sols scatter light while true solutions do not. Reason The particles in the colloidal sol move slower than that of the true solutions. -Chemistry

Last Answer : Both assertion and reason are true but the reason is not the correct explanation of assertion. The size of colloidal particles is large enough to scatter light while particles of a true solution are too small to scatter light.

Description : Explain why particles of a colloidal solution do not settle down when left undisturbed, while in the case of a suspension they do? -Maths 9th

Last Answer : The colloidal particles are smaller and not heavy. They always remain in a state of zig-zag motion, called Brownian movement, which counters the force of gravity acting on colloidal particles and ... particles of suspension are larger, heavy and have less movement, thus settle down due to gravity.

Description : Explain why particles of a colloidal solution do not settle down when left undisturbed, while in the case of a suspension they do? -Maths 9th

Last Answer : The colloidal particles are smaller and not heavy. They always remain in a state of zig-zag motion, called Brownian movement, which counters the force of gravity acting on colloidal particles and ... particles of suspension are larger, heavy and have less movement, thus settle down due to gravity.

Description : Which colloidal solution is used in photography? -Do You Know?

Last Answer : Photographic emulsion is a light-sensitive colloid used in film-based photography. Most commonly, in silver-gelatin photography, it consists of silver halide crystals dispersed in gelatin.

Description : Which colloidal solution is commonly used as germ killer? -Do You Know?

Last Answer : colloidal solution is commonly used as germ killer soo therefore the option a is correct

Description : Blood colloidal osmotic pressure mainly maintained by which plasma protein `:-`

Last Answer : Blood colloidal osmotic pressure mainly maintained by which plasma protein `:-` A. Globulin B. Albumin C. Fibrinogen D. Prothombin

Description : In domestic sewage, suspended solids, colloidal and dissolved materials constitute

Last Answer : In domestic sewage, suspended solids, colloidal and dissolved materials constitute A. 0.1 B. 0.056 C. 0.027 D. 0.001

Description : Who called larger colloidal particles of primitives sea as coacervates :

Last Answer : Who called larger colloidal particles of primitives sea as coacervates : A. Fox B. Oparin C. Empedcles D. Haldane

Description : Assertion :- Filtration of colloidal particles is not possible by filter paper. Reason :- Size of colloidal particle is less than filter paper pores.

Last Answer : Assertion :- Filtration of colloidal particles is not possible by filter paper. Reason :- Size of ... D. If both Assertion & Reason are False.

Description : Colloidal solution show in `H_(2)O` :-

Last Answer : Colloidal solution show in `H_(2)O` :- A. Paramagnetism B. Scttering of light (tyndall effect) C. Refraction D. All of these

Description : The protcting power of lyophilic colloidal solution is expressed in terms of

Last Answer : The protcting power of lyophilic colloidal solution is expressed in terms of A. Critical number B. ... number C. Coagulation value D. Gold number

Description : Soaps essentially form a colloidal solution in water and remove the greasy matters by :

Last Answer : Soaps essentially form a colloidal solution in water and remove the greasy matters by : A. adsorption B. emulsification C. coagulation D. absorption

Description : Smoke is a colloidal sol of

Last Answer : Smoke is a colloidal sol of A. Gas dispersed in a solid B. solid dispersed in a gas C. solid dispersed in a liquid D. gas dispersed in a liquid

Description : The volume of a colloidal particle `V_C` as compared to the volume of a solute particle in a true solution `V_S` could be

Last Answer : The volume of a colloidal particle `V_C` as compared to the volume of a solute particle in a true solution `V_S` could ... `~ 10^(-3)` D. `~ 10^(3)`

Description : The dispersed phase in colloidal iron (III) hydroxide and collodial gold is positively and negtively charged respectively with of the following statem

Last Answer : The dispersed phase in colloidal iron (III) hydroxide and collodial gold is positively and negtively ... readily than the iron (III) hydroxide sol.