In liquid-liquid extraction, the number of phases at plait point is (A) 1 (B) 2 (C) 3 (D) 4

In liquid-liquid extraction, the number of phases at plait point is
(A) 1
(B) 2
(C) 3
(D) 4
by

1 Answer

Answer :

(A) 1
by

Related questions

At __________ point, all the three phases (i.e. solid, liquid and gas) co exist. (A) Eutectic (B) Triple (C) Plait (D) Critical

Description : At __________ point, all the three phases (i.e. solid, liquid and gas) co exist. (A) Eutectic (B) Triple (C) Plait (D) Critical

Last Answer : (B) Triple

Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used in solvent extraction decreases (C) The selectivity of solvent used in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Description : Pick out the correct statement. (A) In case of liquid-liquid extraction, no separation is possible, if the selectivity of the solvent used is unity (B) With increase in temperature, the selectivity of the solvent used ... in solvent extraction is unity at the plait point (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

In most of the mechanically agitated liquid-liquid extractors, baffles or horizontal compartmental plates are provided, which helps in (A) Reducing the axial mixing (B) Increasing the rate of extraction (C) Maintaining the concentration difference between the two phases (D) All 'a', 'b' & 'c'

Description : In most of the mechanically agitated liquid-liquid extractors, baffles or horizontal compartmental plates are provided, which helps in (A) Reducing the axial mixing (B) Increasing the rate of extraction (C) Maintaining the concentration difference between the two phases (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

A plait point is the point on the solubility curve, where the tie line reduces to a point. What is the number of plait point for a ternary system containing two pairs of partially miscible liquids? (A) 0 (B) 1 (C) 2 (D) 3

Description : A plait point is the point on the solubility curve, where the tie line reduces to a point. What is the number of plait point for a ternary system containing two pairs of partially miscible liquids? (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0

The temperature at which both liquid and gas phases are identical, is called the __________ point. (A) Critical (B) Triple (C) Freezing (D) Boiling

Description : The temperature at which both liquid and gas phases are identical, is called the __________ point. (A) Critical (B) Triple (C) Freezing (D) Boiling

Last Answer : (A) Critical

Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of a system decreases with the evolution of heat (C) Change of internal energy is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Description : Pick out the wrong statement. (A) Surface tension of a substance vanishes at critical point, as there is no distinction between liquid and vapour phases at its critical point (B) Entropy of ... is negative for exothermic reactions (D) The eccentric factor for all materials is always more than one

Last Answer : (D) The eccentric factor for all materials is always more than one

The point at which all the three (solid, liquid and gas) phases co-exist, is known as the __________ point. (A) Freezing (B) Triple (C) Boiling (D) Boyle

Description : The point at which all the three (solid, liquid and gas) phases co-exist, is known as the __________ point. (A) Freezing (B) Triple (C) Boiling (D) Boyle

Last Answer : B) Triple

At the critical point of a substance (A) The surface tension vanishes (B) Liquid and vapour have the same density (C) There is no distinction between liquid and vapour phases (D) All (A), (B) and (C)

Description : At the critical point of a substance (A) The surface tension vanishes (B) Liquid and vapour have the same density (C) There is no distinction between liquid and vapour phases (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Solid and liquid phases of a substance are in equilibrium at the (A) Critical temperature (B) Melting point (C) Freezing point (D) Both (B) and (C)

Description : Solid and liquid phases of a substance are in equilibrium at the (A) Critical temperature (B) Melting point (C) Freezing point (D) Both (B) and (C)

Last Answer : D) Both (B) and (C)

What does plait mean ?

Description : What does plait mean ?

Last Answer : Plait means row.

Mushroom Plait with Port and Chestnut Sauce

Description : Mushroom Plait with Port and Chestnut Sauce

Last Answer : 3 x 15 ml spoonsI3 tbsp olive oil 25 gl 1 oz butter 4 spring onions, sliced 900 g/2 lb flat mushrooms, chopped 2 cloves of garlic I eating apple, peeled and finely chopped 2 X ... serve hot. The plait is also good with cranberry and orange sauce. The mushroom stuffing is excellent in pancakes.

Raw Kerosene has a smoke point of 15 mm. After it is subjected to dearomatization by liquid SO2 extraction (Edeleanu process), its smoke point may become __________ mm. (A) 5 (B) 10 (C) 25 (D) 100

Description : Raw Kerosene has a smoke point of 15 mm. After it is subjected to dearomatization by liquid SO2 extraction (Edeleanu process), its smoke point may become __________ mm. (A) 5 (B) 10 (C) 25 (D) 100

Last Answer : (C) 25

Dearomatization of kerosene (by liquid sulphur dioxide extraction) is done to (A) Increase its smoke point (B) Improve its oxidation stability (C) Decrease the breathing loss (D) None of these

Description : Dearomatization of kerosene (by liquid sulphur dioxide extraction) is done to (A) Increase its smoke point (B) Improve its oxidation stability (C) Decrease the breathing loss (D) None of these

Last Answer : (B) Improve its oxidation stability

What refers to the state at which liquid and gaseous phases are indistinguishable?  a. Triple point  b. Critical point  c. Boiling point  d. Pour point

Description : What refers to the state at which liquid and gaseous phases are indistinguishable?  a. Triple point  b. Critical point  c. Boiling point  d. Pour point

Last Answer : Critical point

To get high tray efficiency (A) Interfacial surface between liquid and gas phase should be large (B) Time of contact between the two phases should be less (C) Gas velocity should be very low (D) Liquid entrainment should be severe

Description : To get high tray efficiency (A) Interfacial surface between liquid and gas phase should be large (B) Time of contact between the two phases should be less (C) Gas velocity should be very low (D) Liquid entrainment should be severe

Last Answer : (A) Interfacial surface between liquid and gas phase should be large

In case of absorption & stripping, the interface of the liquid & gas phases are present in equilibrium, when the diffusional resistance of __________ is zero. (A) Interface (B) Gas phase (C) Liquid phase (D) All 'a', 'b' & 'c'

Description : In case of absorption & stripping, the interface of the liquid & gas phases are present in equilibrium, when the diffusional resistance of __________ is zero. (A) Interface (B) Gas phase (C) Liquid phase (D) All 'a', 'b' & 'c'

Last Answer : (A) Interface

A trickle bed reactor is the one, which (A) Has altogether three streams either entering or leaving (B) Processes three reactants at different flow rates (C) Processes three reactants with same flow rate (D) Employs all the three phases (i.e. solid, liquid and gas)

Description : A trickle bed reactor is the one, which (A) Has altogether three streams either entering or leaving (B) Processes three reactants at different flow rates (C) Processes three reactants with same flow rate (D) Employs all the three phases (i.e. solid, liquid and gas)

Last Answer : (D) Employs all the three phases (i.e. solid, liquid and gas)

When liquid and vapour phase of multi-component system are in equilibrium (at a given temperature and pressure), then chemical potential of each component is (A) Same in both the phases (B) Zero in both the phases (C) More in vapour phase (D) More in liquid phase

Description : When liquid and vapour phase of multi-component system are in equilibrium (at a given temperature and pressure), then chemical potential of each component is (A) Same in both the phases (B) Zero in both the phases (C) More in vapour phase (D) More in liquid phase

Last Answer : (A) Same in both the phases

When liquid and vapour phases of one component system are in equilibrium (at a given temperature and pressure), the molar free energy is (A) More in vapour phase (B) More in liquid phase (C) Same in both the phases (D) Replaced by chemical potential which is more in vapour phase

Description : When liquid and vapour phases of one component system are in equilibrium (at a given temperature and pressure), the molar free energy is (A) More in vapour phase (B) More in liquid phase (C) Same in both the phases (D) Replaced by chemical potential which is more in vapour phase

Last Answer : (C) Same in both the phases

The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Description : The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Last Answer : (B) 2

One of the methods of purification of leach liquor is ion exchange, which involves (A) Exchange between two liquid phases (B) Exchange between a gaseous phase and a liquid phase (C) Exchange between a liquid phase and an organic resin phase (D) Exchange between a solid phase and a gas phase

Description : One of the methods of purification of leach liquor is ion exchange, which involves (A) Exchange between two liquid phases (B) Exchange between a gaseous phase and a liquid phase (C) Exchange between a liquid phase and an organic resin phase (D) Exchange between a solid phase and a gas phase

Last Answer : (C) Exchange between a liquid phase and an organic resin phase

Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given ‘L/V’ ratio (B) The extraction per unit of total height for a short packed column is more effective than for a tall column, in case of liquid-liquid extraction(C) Natural draft cooling towers are made of ferroconcrete and its cross￾section is wider at the bottom(D) Vander wall adsorption is also called chemisorption

Description : Pick out the wrong statement. (A) With decrease in feed temperature, the number of plates required for binary distillation decreases for a given L/V' ratio (B) The extraction per unit ... and its cross￾section is wider at the bottom (D) Vander wall adsorption is also called chemisorption

Last Answer : (D) Vander wall adsorption is also called chemisorption

Which one of the following best defines the word “allotropes”? A Different structural forms of an element B A pair of substances that differ by H+ C Elements that possess properties intermediate between those of metals and nonmetals D Atoms of a given atomic number that have a specific number of neutrons E The different phases (solid, liquid or gas) of a substance

Description : Which one of the following best defines the word allotropes ? A Different structural forms of an element B A pair of substances that differ by H+ C Elements that possess properties intermediate between ... a specific number of neutrons E The different phases (solid, liquid or gas) of a substance

Last Answer : A Different structural forms of an element 

Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture(B) Methyl ethyl ketone & glycol(C) Phenol & furfural(D) Propane & liquid sulphur dioxide

Description : Solvent used in duo-sol extraction for lube oil upgradation is a mixture of (A) Propane & phenol-cresol mixture (B) Methyl ethyl ketone & glycol (C) Phenol & furfural (D) Propane & liquid sulphur dioxide

Last Answer : (A) Propane & phenol-cresol mixture

The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) Diffusion of the solute from the solution in contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Description : The rate of solid-liquid extraction is limited by the (A) Phase change of the solute as it dissolves in the solvent (B) Diffusion of the solute through the solvent in the pores to the outside of the particle (C) ... contact with the particle to the main bulk of the solution (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Which of the following unit operations makes use of Thiele-Geddes equation? (A) Liquid-liquid extraction (B) Solid-liquid extraction (C) Multi-component absorption with chemical reaction (D) Multi-component distillation

Description : Which of the following unit operations makes use of Thiele-Geddes equation? (A) Liquid-liquid extraction (B) Solid-liquid extraction (C) Multi-component absorption with chemical reaction (D) Multi-component distillation

Last Answer : (D) Multi-component distillation

Separation of two or more components of a liquid solution cannot beachieved by (A) Fractional crystallisation (B) Liquid extraction (C) Absorption (D) Evaporation

Description : Separation of two or more components of a liquid solution cannot beachieved by (A) Fractional crystallisation (B) Liquid extraction (C) Absorption (D) Evaporation

Last Answer : (C) Absorption

Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available (B) One of the liquid components is heat sensitive (C) Viscosity of liquid components is very high (D) One of the liquid components has very high affinity towards the solvent

Description : Solvent extraction is the terminology applied to the liquid-liquid extraction, which is preferred for the separation of the components of liquids, when (A) Extracting solvent is cheaply & abundantly available ... very high (D) One of the liquid components has very high affinity towards the solvent

Last Answer : (D) One of the liquid components has very high affinity towards the solvent

Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Description : Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Last Answer : (A) Liquid extraction

Steady state equimolal counter diffusion occurs in case of (A) Leaching (B) Absorption (C) Binary phase distillation (D) Liquid-liquid extraction

Description : Steady state equimolal counter diffusion occurs in case of (A) Leaching (B) Absorption (C) Binary phase distillation (D) Liquid-liquid extraction

Last Answer : (C) Binary phase distillation

Which of the following equipments is not used in liquid-liquid extraction? (A) Pachuka tank (B) Agitated vessels (C) Centrifugal extractors (D) Packed towers

Description : Which of the following equipments is not used in liquid-liquid extraction? (A) Pachuka tank (B) Agitated vessels (C) Centrifugal extractors (D) Packed towers

Last Answer : (A) Pachuka tank

Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a distillation column (C) Separation of components is not possible in liquid extraction, if selectivity is unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Description : Pick out the wrong statement. (A) Critical moisture content is not a property of the material itself (B) A sharp increase in pressure drop gives an indication of the flooding in a ... unity (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

Last Answer : (D) Dehydration of ethyl alcohol is most economically done by molecular distillation at very high vacuum

The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient(C) Both (A) and (B)(D) Neither (A) nor (B)

Description : The solvent used in liquid-liquid extraction should have __________ less than one. (A) Selectivity (B) Distribution co-efficient (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

The recovery of penicillin from the acidified fermentation broth is done by (A) Distillation (B) Evaporation (C) Absorption (D) Liquid extraction

Description : The recovery of penicillin from the acidified fermentation broth is done by (A) Distillation (B) Evaporation (C) Absorption (D) Liquid extraction

Last Answer : (D) Liquid extraction

Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation

Description : Extraction of coffee from its seed is done by (A) Liquid-liquid extraction (B) Leaching (C) Extractive distillation (D) Steam distillation

Last Answer : (B) Leaching

Tea percolation employs (A) Liquid-liquid extraction(B) Leaching(C) Absorption(D) None of these

Description : Tea percolation employs (A) Liquid-liquid extraction (B) Leaching (C) Absorption (D) None of these

Last Answer : (B) Leaching

A coalescer in a mixer-settler liquid-liquid extraction column (A) Comprises of thin bed of substances of extended surface having high porosity (B) Helps in increasing the bubble size entering the settler (C) Helps in increasing the settling rate of the bubbles (D) All 'a', 'b', & 'c'

Description :  A coalescer in a mixer-settler liquid-liquid extraction column (A) Comprises of thin bed of substances of extended surface having high porosity (B) Helps in increasing the bubble size entering the settler ... increasing the settling rate of the bubbles (D) All 'a', 'b', & 'c'

Last Answer : (D) All 'a', 'b', & 'c'

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

In liquid extraction, if the selectivity is unity, then (A) Separation of the constituents is the most effective (B) No separation will occur (C) Amount of solvent required will be minimum (D) Solvent flow rate should be very low

Description : In liquid extraction, if the selectivity is unity, then (A) Separation of the constituents is the most effective (B) No separation will occur (C) Amount of solvent required will be minimum (D) Solvent flow rate should be very low

Last Answer : (B) No separation will occur

Which one of the following devices is not used for both the absorption as well as the liquid-liquid extraction processes? (A) Packed towers(B) Plate towers(C) Spray towers(D) Wetted wall columns

Description : Which one of the following devices is not used for both the absorption as well as the liquid-liquid extraction processes? (A) Packed towers (B) Plate towers (C) Spray towers (D) Wetted wall columns

Last Answer : (D) Wetted wall columns

Black liquor is converted into white liquor by (A) Evaporation and burning the concentrate followed by causticisation of products (B) Multi-effect evaporation only (C) Selective liquid extraction (D) Extractive distillation

Description : Black liquor is converted into white liquor by (A) Evaporation and burning the concentrate followed by causticisation of products (B) Multi-effect evaporation only (C) Selective liquid extraction (D) Extractive distillation

Last Answer : (A) Evaporation and burning the concentrate followed by causticisation of products

Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Description : Glycerine is recovered from lye by (A) Evaporation followed by vacuum distillation (B) Liquid extraction technique (C) Extractive distillation technique (D) None of these

Last Answer : (A) Evaporation followed by vacuum distillation

The most important application of distribution law is in (A) Evaporation (B) Liquid extraction (C) Drying (D) Distillation

Description : The most important application of distribution law is in (A) Evaporation (B) Liquid extraction (C) Drying (D) Distillation

Last Answer : (B) Liquid extraction

When the stopper is removed from a partly filled bottle containing solid and liquid acetic acid at 16.7 and degC a strong vinegar like odor is noticeable immediately. How many acetic acid phases must?

Description : When the stopper is removed from a partly filled bottle containing solid and liquid acetic acid at 16.7 and degC a strong vinegar like odor is noticeable immediately. How many acetic acid phases must?

Last Answer : When the stopper is removed from a partly filled bottlecontaining solid and liquid acetic acid at 16.7 °C, a strongvinegar like odor is noticeable immediately. How many acetic acidphases must be present in the bottle? Explain.

(4) Water drops in a dispersion medium of air Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed phase (or internal phase) and a continuous phase (or dispersion medium) in which the colloid is dispersed. A colloidal system may be solid, liquid, or gas. Cloud is a colloidal dispersion of Water drops in a dispersion medium of air.

Description : (4) Water drops in a dispersion medium of air Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... or gas. Cloud is a colloidal dispersion of Water drops in a dispersion medium of air.

Last Answer : Conduction band electrons have more mobility than holes because they – (1) are lighter (2) experience collision less frequently (3) have negative charge (4) need less energy to move them

(2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed phase (or internal phase) and a continuous phase (or dispersion medium) in which the colloid is dispersed. A colloidal system may be solid, liquid, or gas. Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Description : (2) Fat is dispersed in water Explanation: A colloid is a substance microscopically dispersed evenly throughout another substance. A colloidal system consists of two separate phases: a dispersed ... Milk is an emulsified colloid of liquid butterfat globules dispersed within a water-based solution.

Last Answer : The presence of ozone in the stratosphere is responsible for – (1) increasing the average global temperature in recent years (2) higher rate of photosynthesis (3) checking the penetration of ultra-violet rays to the earth (4) supplying oxygen for people travelling in jets