A spring balance A and a beam balance B are used to weigh an object at different points on Earth. It will be observed that (a) The readings of A and B will be different at different points of the Earth. (b) The readings of A will be the same but the readings of B will be different at different places. (c) Both A and B will have the same reading at all points on the Earth. (d) The readings of A will be different but those of B will be the same at different points on the Earth.

A spring balance A and a beam balance B are used to weigh an object at different points on Earth. It will be observed that (a) The readings of A and B will be different at different points of the Earth. (b) The readings of A will be the same but the readings of B will be different at different places. (c) Both A and B will have the same reading at all points on the Earth. (d) The readings of A will be different but those of B will be the same at different points on the Earth.
by

1 Answer

Answer :

Ans:(d)  
by
selected

Related questions

State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Description : State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Last Answer : 1) First reading is on bench mark point and should be noted in back sight(BS) column 2) Intermediate reading (IS) should be taken on the points between first and last station. 3) Last reading ... column of next page 6) Remark column should have denote First and Last RL along with change points.

State the important points kept in mind while recording the readings in level pages with respect first reading, intermediate readings, last reading, and change point, carry forward from one page to next page - Remarks.

Description : State the important points kept in mind while recording the readings in level pages with respect first reading, intermediate readings, last reading, and change point, carry forward from one page to next page - Remarks. 

Last Answer : The following points should be kept in mind while recording the reading in level pages. 1. The first reading should be always noted as back sight (B.S.) 2. All the intermediate readings should ... horizontal line represents only one station. 8. Readings of each station should be in one line only.

What is the apparent movement of an object across a background when observed from two different places?

Description : What is the apparent movement of an object across a background when observed from two different places?

Last Answer : Parallax is the apparent movement of an object across a background when observed from two different places.

A body whose true weight is 14 kg appears to weigh 15 kg when weighed with the help of a spring balance in a moving lift. The acceleration of the lift at the time was a.1 m/sec2 b.0.7 m/sec2 c.0.5 m/sec2 d.1.4 m/sec2 e.0.35 m/sec2

Description : A body whose true weight is 14 kg appears to weigh 15 kg when weighed with the help of a spring balance in a moving lift. The acceleration of the lift at the time was a.1 m/sec2 b.0.7 m/sec2 c.0.5 m/sec2 d.1.4 m/sec2 e.0.35 m/sec2

Last Answer : b. 0.7 m/sec2

A bucket of water is hanging from a spring balance. An iron piece is suspended into water without touching sides of bucket from another support. The spring balance reading will (A) Increase (B) Decrease (C) Remain same (D) Increase/decrease depending on depth of immersion

Description : A bucket of water is hanging from a spring balance. An iron piece is suspended into water without touching sides of bucket from another support. The spring balance reading will (A) Increase (B) Decrease (C) Remain same (D) Increase/decrease depending on depth of immersion

Last Answer : Answer: Option C

Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs (c) Temporary adjustments of the dumpy level are to be performed at every set up (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Description : Which one of the following statements is not correc t? (a) Parallax error is eliminated when there is no change in the staff reading when eye is moved up and down (b) The objective lens is ... (d) The eyepiece need not be adjusted after the first set up when the same surveyor is taking readings

Last Answer : (b) The objective lens is to be focused towards a white or bright background for clear visibility of cross-hairs

Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Description : Besides setting up the meter for expected voltage ranges, what must be strictly observed when taking dc voltage readings?

Last Answer : Polarit

A 2 kg object weighs 1.8 kgf on a spring balance. The value of 'g' at that location in m/sec2is (A) 8.82 (B) 9.81 (C) 10.88 (D) 0.95

Description : A 2 kg object weighs 1.8 kgf on a spring balance. The value of 'g' at that location in m/sec2is (A) 8.82 (B) 9.81 (C) 10.88 (D) 0.95

Last Answer : (A) 8.82

An object having 10 kg mass weighs 9.81 kg on a spring balance. The value of 'g' at this place is (A) 10 m/sec² (B) 9.81 m/sec² (C) 9.75 m/sec² (D) 9 m/sec

Description : An object having 10 kg mass weighs 9.81 kg on a spring balance. The value of 'g' at this place is (A) 10 m/sec² (B) 9.81 m/sec² (C) 9.75 m/sec² (D) 9 m/sec

Last Answer : Answer: Option A

As shown in the illustration, what maintenance would be required of the circuit components? EL-0058 A. Change out both 'C' units monthly. B. Clean the glass surrounding 'E1' & 'E2' as needed. C. File the points at the upper end of 'G' every six months. D. Take megger readings on 'E1' & 'E2' windings quarterly.

Description : As shown in the illustration, what maintenance would be required of the circuit components? EL-0058 A. Change out both 'C' units monthly. B. Clean the glass surrounding 'E1' & 'E2' as needed. C. File ... upper end of 'G' every six months. D. Take megger readings on 'E1' & 'E2' windings quarterly.

Last Answer : Answer: B

Psychic Readings: What To Expect For Your First Reading?

Description : Psychic Readings: What To Expect For Your First Reading?

Last Answer : There is much controversy over whether psychics legitimatelyhave a sixth sense or whether they are just great actors. Whilemany people are curious about psychics, few people have ... ordistant readings. Most people are probably most familiar with palmreadings, astrology readings, horosco

If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Description : If air gap readings for an electical generating machine have changed significantly from the last reading, you should check _________. A. the bearings B. insulation readings and machine cleanliness C. the prime mover thrust bearing D. the field coil bolts for the proper torque values

Last Answer : Answer: A

When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in the electrolyte B. any water that has been previously added to the cells will dilute the solution and give a false reading C. a hydrometer reading is inaccurate if taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Description : When you check the specific gravity of the battery electrolyte with a hydrometer, it should be kept in mind that ____________. A. the battery is fully charged when the indicator floats low in ... taken immediately after water is added to the cell D. temperature has no effect on hydrometer readings

Last Answer : Answer: C

A low voltage source is being used for testing armature coils. A coil short circuit will be indicated by a _______. A. high voltage reading, while the other coil readings will have an equal or lower value B. low or zero voltage reading, while the other coils will have higher readings C. fluctuating voltmeter reading, while the other coil readings are steady D. steady voltmeter reading, while the other coil readings are fluctuating

Description : A low voltage source is being used for testing armature coils. A coil short circuit will be indicated by a _______. A. high voltage reading, while the other coil readings will have an ... the other coil readings are steady D. steady voltmeter reading, while the other coil readings are fluctuating

Last Answer : Answer: B

A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff readings obtained at A and B were 1.11 and 1.39. The correct staff reading from this set up at S should be (A) 1.435 (B) 1.345 (C) 1.425 (D) None of these

Description : A dumpy level was set up at mid-point between pegs A and B, 80 m apart and the staff readings were 1.32 and 1.56. When the level was set up at a point 10 m from A on BA produced, the staff readings obtained at A ... this set up at S should be (A) 1.435 (B) 1.345 (C) 1.425 (D) None of these

Last Answer : (B) 1.345

In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Description : In optical reading instruments (A) The vertical circle is usually continuous from 0° to 359° (B) The readings increase when the telescope is elevated in the face left position (C) The readings decrease when the telescope is elevated in the face right position (D) All the above

Last Answer : (D) All the above

Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the readings of the two verniers gives correct reading free from the eccentricity (C) One Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Description : Which one of the following statements is correct? (A) When the axes of rotation of the graduated circle and the verniers are not coincident, the instrument possesses eccentricity (B) The mean of the ... Vernier may be used if the readings of two verniers differ by a constant (D) All the above

Last Answer : (D) All the above

The TOTAL energy of a vertically vibrating block attached to a spring is the same: w) only at those points above the equilibrium position x) only at the equilibrium position y) only at those points below the equilibrium position z) at all points in its motion

Description : The TOTAL energy of a vertically vibrating block attached to a spring is the same: w) only at those points above the equilibrium position x) only at the equilibrium position y) only at those points below the equilibrium position z) at all points in its motion

Last Answer : ANSWER: Z -- AT ALL POINTS IN ITS MOTION

When correcting specific gravity readings of a lead-acid battery for existing temperature conditions, you should ______________. A. add 10 points for each 4° above 80°F B. subtract 10 points for each 4° above 80°F C. add 4 points for each 10° above 80°F D. add 4 points for each 10° below 80°F

Description : When correcting specific gravity readings of a lead-acid battery for existing temperature conditions, you should ______________. A. add 10 points for each 4° above 80°F B. subtract 10 points for each 4° above 80°F C. add 4 points for each 10° above 80°F D. add 4 points for each 10° below 80°F

Last Answer : Answer: C

Find the distance of a heavenly object from the earth if the parallactic angle as measured from two places at a distance of `6.284xx10^(6)m` apart is

Description : Find the distance of a heavenly object from the earth if the parallactic angle as measured from two places at a distance of `6.284xx10^(6)m` apart is

Last Answer : Find the distance of a heavenly object from the earth if the parallactic angle as measured from two places at a ... .284xx10^(6)m` apart is `2^(@)`.

How many grams does a spring onion weigh?

Description : How many grams does a spring onion weigh?

Last Answer : What is the answer ?

If place 1 cake of soap on a pan of a scale and 3/4 cake of soap and a 3/4-pound weight on the other, the pans balance.How much does a cake of soap weigh? -Riddles

Description : If place 1 cake of soap on a pan of a scale and 3/4 cake of soap and a 3/4-pound weight on the other, the pans balance.How much does a cake of soap weigh? -Riddles

Last Answer : Since 1/4 cake weighs 3/4 pound, and entire cake weighs 3 pounds.

What is observed (i) When a beam of light is pressed through a colloidal sol (ii) An electrolyte, NaCl is added to hydrated ferric oxide sol. (iii) Electric current is passed through colloidal sol.

Description : What is observed (i) When a beam of light is pressed through a colloidal sol (ii) An electrolyte, NaCl is added to hydrated ferric oxide sol. (iii) Electric current is passed through colloidal sol.

Last Answer : Ans.: (i) Tyndal Effect (iv) Coagulation (v) Electrophoresis

Reading Jellies, please take a look at your bookshelves. How many of those authors are the same gender as you, how many are different, and how many are you unable to the tell the gender?

Description : Reading Jellies, please take a look at your bookshelves. How many of those authors are the same gender as you, how many are different, and how many are you unable to the tell the gender?

Last Answer : answer:I have never thought of that. Wow… of the books within arm’s reach, only one is written by a female author. But, I tend to collect books by the same author. Within the books I’m considering, there’s only 9 authors.

A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Description : A beam fixed at both ends with a central load W in the middle will have zero bending moment at a.one place b.two places c.no where d.three places e.107 dynes

Last Answer : b. two places

How do the melting points of trans isomers compare to the cis isomers for alkenes? (a) cis isomers have higher melting points (b) trans isomers have higher melting points (c) both have similar melting points (d) no consistent trend is observed

Description : How do the melting points of trans isomers compare to the cis isomers for alkenes? (a) cis isomers have higher melting points (b) trans isomers have higher melting points (c) both have similar melting points (d) no consistent trend is observed

Last Answer : trans isomers have higher melting points

Mirage is observed mainly during (a) Sunny (b) Winter (c) Spring (d) Hot

Description : Mirage is observed mainly during (a) Sunny (b) Winter (c) Spring (d) Hot

Last Answer : (a) Sunny

With respect to the auditor's planning of a year-end examination, which of the following statements is always true? a. An engagement should not be accepted after the fiscal year-end. b. It is an acceptable practice to carry out substantial parts of the examination at interim dates. c. An inventory count must be observed at the balance sheet date. d. The client's audit committee should not be told of the specific audit procedures that will be performed

Description : With respect to the auditor's planning of a year-end examination, which of the following statements is always true? a. An engagement should not be accepted after the fiscal year-end. b. It ... . The client's audit committee should not be told of the specific audit procedures that will be performed

Last Answer : It is an acceptable practice to carry out substantial parts of the examination at interim dates

What would happen if gravity suddenly doubled on Earth, but the mass of the atmosphere did not change? (a) Surface pressure would stay the same but the density would increase. (b) Surface pressure would increase but the density would stay the same. (c) Surface pressure and density would both increase. (d) Surface density and pressure would stay the same because the atmosphere is in hydrostatic balance.

Description : What would happen if gravity suddenly doubled on Earth, but the mass of the atmosphere did not change? (a) Surface pressure would stay the same but the density would increase. (b) Surface ... (d) Surface density and pressure would stay the same because the atmosphere is in hydrostatic balance.

Last Answer : Surface pressure and density would both increase.

Is there an application for the i touch were i could weigh an object on it?

Description : Is there an application for the i touch were i could weigh an object on it?

Last Answer : No.

Where does an object weigh more ?

Description : Where does an object weigh more ?

Last Answer : The weight of the object is higher in the polar region.

Why are two identical thermometers giving different readings?

Description : Why are two identical thermometers giving different readings?

Last Answer : JP: Review last sentence.

What’s gravity like on Saturn? Would I weigh the same on Saturn as on Earth?

Description : What’s gravity like on Saturn? Would I weigh the same on Saturn as on Earth?

Last Answer : The gravitational acceleration at the cloud tops of Saturn is similar to that near the surface of Earth - 10.4 m/sec2 for Saturn, compared to 9.8 m/sec2 on the surface of Earth. Thus, it turns out you ... six times less on the Moon. Your mass, however, is exactly the same on the Moon or on Earth. 

Are variations in blood pressure readings in the same sitting normal?

Description : Are variations in blood pressure readings in the same sitting normal?

Last Answer : answer:Yes, variations are normal, particular if you take the second reading immediately following the first one. When you take your blood pressure you squeeze a band of pressure around your arm. It takes ... of points lower. That being said, the variation in the readings you show are not that big.

In preparing to take insulation resistance readings on a main generator, the windings should be grounded for about 15 minutes prior to the test to _____________. A. allow accurate zeroing of the meter B. help the windings to cool to ambient temperature C. release any residual capacitive charge from the windings D. help the windings to cool to the same temperature as the ground test connection

Description : In preparing to take insulation resistance readings on a main generator, the windings should be grounded for about 15 minutes prior to the test to _____________. A. allow accurate zeroing of the meter ... the windings D. help the windings to cool to the same temperature as the ground test connection

Last Answer : Answer: C

Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made vertically downwards from a horizontal plane (C) The horizontal plane with reference to which staff readings are taken, coincides with the level surface through the telescope axis (D) All the above

Description : Pick up the correct statement from the following: (A) The lines of sight while observing back sight and fore sight lie in the same horizontal plane (B) The staff readings are measurements made ... readings are taken, coincides with the level surface through the telescope axis (D) All the above

Last Answer : (D) All the above

Fahrenheit and Centigrade scales have the same readings at (A) -55° (B) -40° (C) -33° (D) -58°

Description : Fahrenheit and Centigrade scales have the same readings at (A) -55° (B) -40° (C) -33° (D) -58°

Last Answer : r: Option B

harrow which consist of one or more blades attached to the beam Or frame, used for shallow working of the soil. A Spike tooth harrow B Acme harrow C Spring tooth harrow D Blade harrow

Description : harrow which consist of one or more blades attached to the beam Or frame, used for shallow working of the soil. A Spike tooth harrow B Acme harrow C Spring tooth harrow D Blade harrow

Last Answer : Blade harrow

Why do doctors use Beam Balance Scales instead of digital scales?

Description : Why do doctors use Beam Balance Scales instead of digital scales?

Last Answer : Because they are more exact than digital ones.

Which of the following is an ex-ample for cantilever beam? (1) Diving board (2) Bridge (3) See-saw (4) Common balance

Description : Which of the following is an ex-ample for cantilever beam? (1) Diving board (2) Bridge (3) See-saw (4) Common balance

Last Answer : (2) Bridge Explanation: A cantilever is a beam anchored at only one end. The beam carries the load to the support where it is resisted by moment and shear stress. Cantilever ... with loads applied between the supports. Cantilevers are widely found in construction, notably in cantilever bridges.

Which of the following is an example for cantilever beam? (1) Diving board (2) Bridge (3) See-saw (4) Common balance

Description : Which of the following is an example for cantilever beam? (1) Diving board (2) Bridge (3) See-saw (4) Common balance

Last Answer : Bridge

2. The image formed by a concave mirror is observed to be virtual, erect and larger than the object. Where should be the position of the object? -Physics-10

Description : 2. The image formed by a concave mirror is observed to be virtual, erect and larger than the object. Where should be the position of the object? -Physics-10

Last Answer : (d) The position of the object should be between the pole of the mirror and its principal focus.

Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam (A) Are curtailed if not required to resist the bending moment (B) Are bent up at suitable places to serve as shear reinforcement (C) Are bent down at suitable places to serve as shear reinforcement (D) Are maintained at bottom to provide at least local bond stress

Description : Pick up the incorrect statement from the following: Tensile reinforcement bars of a rectangular beam (A) Are curtailed if not required to resist the bending moment (B) Are bent up at suitable ... to serve as shear reinforcement (D) Are maintained at bottom to provide at least local bond stress

Last Answer : Answer: Option C

The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left Side .045 - .047, Bottom .045 - .041 Which of the f A. both the aft and foward bearings should be replaced. B. Shims should be removed from the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Description : The following air gap readings were obtained from a horizontally mounted, bilge pump, induction motor, equipped with sleeve bearings: FWD END-AFT END, Top .045 - .049, Right Side .045 - .047, Left ... the aft bearing. C. The forward bearing should be lowered. D. The aft bearing should be lowered.

Last Answer : Answer: A

Air gap readings should be taken on electrical generation machinery periodicly to _________. I. determine the need for cleaning II. check the condition of the bearings A. I only B. II only C. both I and II D. neither I or II

Description : Air gap readings should be taken on electrical generation machinery periodicly to _________. I. determine the need for cleaning II. check the condition of the bearings A. I only B. II only C. both I and II D. neither I or II

Last Answer : Answer: B

Air gap readings for electrical generating equipment should be taken periodicly. This is to _______. I. determine the condition of the bearings II. prevent damage to the rotor and stator A. I only B. II only C. both I and II D. neither I or II

Description : Air gap readings for electrical generating equipment should be taken periodicly. This is to _______. I. determine the condition of the bearings II. prevent damage to the rotor and stator A. I only B. II only C. both I and II D. neither I or II

Last Answer : Answer: C

Air gap readings should be taken on electrical generation equipment periodicly to ________. I. check machine effeciency II. determine the need for cleaning A. I only B. II only C. both I and II D. neither I or II

Description : Air gap readings should be taken on electrical generation equipment periodicly to ________. I. check machine effeciency II. determine the need for cleaning A. I only B. II only C. both I and II D. neither I or II

Last Answer : Answer: D

While testing a semi-conductor diode with an ohmmeter, both the forward and reverse readings are almost in the infinity range. This would indicate that the unit is _____________. A. good B. open C. grounded D. shorted

Description : While testing a semi-conductor diode with an ohmmeter, both the forward and reverse readings are almost in the infinity range. This would indicate that the unit is _____________. A. good B. open C. grounded D. shorted

Last Answer : Answer: B

Which are the types of important ideas to notice about these odometer readings: a. The MSB is the sign bit .O for a +sign and 1 for a— sign b. The negative number represent the 2’s complement of the positive number c. Both d. __ Allof these

Description : Which are the types of important ideas to notice about these odometer readings: a. The MSB is the sign bit .O for a +sign and 1 for a— sign b. The negative number represent the 2’s complement of the positive number c. Both d. __ Allof these

Last Answer : c. Both