Ranging in chain survey means (A) Looking at an isolated point not on the line (B) Establishing an intermediate point on the line (C) Determining the distance between end points (D) Determining the offset distance

Ranging in chain survey means 

(A) Looking at an isolated point not on the line 

(B) Establishing an intermediate point on the line 

(C) Determining the distance between end points 

(D) Determining the offset distance 

by

1 Answer

Answer :

(B) Establishing an intermediate point on the line

by

Related questions

Ranging is an operation of (A) Reconnaissance (B) Judging the distance (C) Determination of slope (D) Establishing intermediate points between terminals

Description : Ranging is an operation of (A) Reconnaissance (B) Judging the distance (C) Determination of slope (D) Establishing intermediate points between terminals

Last Answer : (D) Establishing intermediate points between terminals

In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Description : In a plane-table survey, the process of determining the plotted position of a station occupied by the plane-table by means of sights taken towards known points, the locations of which have already been plotted, is known as (a) Radiation (b) Resection (c) Intersection (d) Traversing

Last Answer : (b) Resection

Which one of the following statements is not relevant to hydrographic survey? (A) Establishment of a chain of bench marks near the shore line (B) Establishment of horizontal control points on the shore (C) Determination of the sea bed profile (D) None of these

Description : Which one of the following statements is not relevant to hydrographic survey? (A) Establishment of a chain of bench marks near the shore line (B) Establishment of horizontal control points on the shore (C) Determination of the sea bed profile (D) None of these

Last Answer : (D) None of these

Determining the policies that are needed for the smooth execution of a project relates to which of the following agenda items of alignment sessions? Select one: a. Developing a common understanding of the project purpose b. Establishing trust among team members c. Engaging stakeholders in dialogue d. Developing role clarification on projects e. Agreeing on the means and methods for accomplishing the purpose

Description : Determining the policies that are needed for the smooth execution of a project  relates to which of the following agenda items of alignment sessions? Select one: a. Developing a common ... role clarification on projects e. Agreeing on the means and methods for accomplishing the purpose

Last Answer : d. Developing role clarification on projects

While measuring the distance between two points along upgrade with the help of a 20 m chain, the forward end of the chain is shifted forward through a distance (A) 20 (sin - 1) (B) 20 (cos - 1) (C) 20 (sec - 1) (D) 20 (cosec - 1)

Description : While measuring the distance between two points along upgrade with the help of a 20 m chain, the forward end of the chain is shifted forward through a distance (A) 20 (sin - 1) (B) 20 (cos - 1) (C) 20 (sec - 1) (D) 20 (cosec - 1)

Last Answer : (C) 20 (sec - 1)

Defines the terms : i) Survey Station ii) Survey Line iii)Offset iv)Triangulation

Description : Defines the terms : i) Survey Station ii) Survey Line iii)Offset iv)Triangulation 

Last Answer : i) Survey Station : It is the point on ground from which various observations are taken around it. ii) Survey Line : It is the straight line joining two successive survey stations ... iv)Triangulation : The frame work consist of number of connected well conditional triangle is called Triangulation.

Which one of the following mistakes/errors may be cumulative + or - : (A) Bad ranging (B) Bad straightening (C) Erroneous length of chain (D) Sag

Description : Which one of the following mistakes/errors may be cumulative + or - :  (A) Bad ranging  (B) Bad straightening  (C) Erroneous length of chain  (D) Sag

Last Answer : (C) Erroneous length of chain

The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Description : The distances AC and BC are measured from two fixed points A and B whose distance AB is known. The point C is plotted by intersection. This method is generally adopted in (A) Chain surveying (B) Traverse method of surveys (C) Triangulation (D) None of these

Last Answer : (A) Chain surveying

RADAR means A. Radio detection and rating B. Radio detection and ranging C. Radio distance and ranging D. Radio delay and ranging

Description : RADAR means A. Radio detection and rating B. Radio detection and ranging C. Radio distance and ranging D. Radio delay and ranging

Last Answer : B. Radio detection and ranging

The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Description : The accuracy of measurement in chain surveying, does not depend upon (A) Length of the offset (B) Scale of the plotting (C) Importance of the features (D) General layout of the chain lines

Last Answer : (D) General layout of the chain lines

State the procedure to find the foot of the perpendicular on the chain line to take the offset.

Description : State the procedure to find the foot of the perpendicular on the chain line to take the offset. 

Last Answer : Ans: By cross staff 1. The cross staff is held vertically on the chain line where the offset is likely to occur. It is turned until one pair of opposite slits is directed to the ranging rod ( say ... the ranging rod at B. 3. The point P1 vertically under the instruments is required point. 

In direct method of contouring, the process of locating or identifying points lying on a contour is called (A) Ranging (B) Centring (C) Horizontal control (D) Vertical control

Description : In direct method of contouring, the process of locating or identifying points lying on a contour is called (A) Ranging (B) Centring (C) Horizontal control (D) Vertical control

Last Answer : (D) Vertical control

Write the uses of following survey instruments i) Ranging Rod ii) Pegs iii) Cross-staff iv) Plumb bob

Description : Write the uses of following survey instruments i) Ranging Rod ii) Pegs iii) Cross-staff iv) Plumb bob

Last Answer : i) Ranging Rod : Ranging rod are used for ranging. ii) Pegs : Pegs are used for marking the positions of stations or terminals points of survey lines. iii) Cross-staff : It is used ... It is also used for accurate centering of the surveying instruments like theodolite, compass, plane table etc. 

The cross-sections for a highway is taken at (A) Right angle to the centre line (B) 30 metres apart (C) Intermediate points having abrupt change in gradient (D) All the above

Description : The cross-sections for a highway is taken at (A) Right angle to the centre line (B) 30 metres apart (C) Intermediate points having abrupt change in gradient (D) All the above

Last Answer : (D) All the above

In a spring mass system of mass m and stiffness k, the end of the spring are securely fixed and mass is attached to intermediate point of spring. The natural frequency of longitudinal vibration of the system A) Is maximum when mass is attached to mid point of the spring B) Is minimum when mass is attached to mid point of the spring C) Decreases as the distance from the top end where mass is attached decreases D) Decreases as the distance from the bottom end where mass is attached decreases

Description : In a spring mass system of mass m and stiffness k, the end of the spring are securely fixed and mass is attached to intermediate point of spring. The natural frequency of longitudinal ... is attached decreases D) Decreases as the distance from the bottom end where mass is attached decreases

Last Answer : B) Is minimum when mass is attached to mid point of the spring

For determining the support reactions at A and B of a three hinged arch, points B and Care joined and produced to intersect the load line at D and a line parallel to the load line through A at D'. Distances AD, DD' and AD' when measured were 4 cm, 3 cm and 5 cm respectively. The angle between the reactions at A and B is (A) 30° (B) 45° (C) 60° (D) 90

Description : For determining the support reactions at A and B of a three hinged arch, points B and Care joined  and produced to intersect the load line at D and a line parallel to the load line through A at D'.  Distances AD, DD ... reactions at A and B is  (A) 30°  (B) 45°  (C) 60°  (D) 90

Last Answer : (D) 90

Buckman Laboratories regularly conducts an employee attitude survey. The findings from this study are most useful in which of the following areas? A)Motivating personnel B)Recruiting personnel C)Employee evaluation D)Establishing performance standards

Description : Buckman Laboratories regularly conducts an employee attitude survey. The findings from this study are most useful in which of the following areas? A)Motivating personnel B)Recruiting personnel C)Employee evaluation D)Establishing performance standards

Last Answer : A)Motivating personnel

For laying a sewer line in a trench of 2 m width, an offset line is marked on the ground parallel to the given centre line at a distance of A. 100 cm B. 120 cm C. 140 cm D. 160 cm

Description : For laying a sewer line in a trench of 2 m width, an offset line is marked on the ground parallel to the given centre line at a distance of A. 100 cm B. 120 cm C. 140 cm D. 160 cm

Last Answer : ANS: D

From the Survey of India map, the distance of the critical point is 20 km and difference in elevation is 193 m. The over land flow time, is (A) 2 hours (B) 3 hours (C) 2 hours and 30 minutes (D) 4 hours

Description : From the Survey of India map, the distance of the critical point is 20 km and difference in elevation is 193 m. The over land flow time, is (A) 2 hours (B) 3 hours (C) 2 hours and 30 minutes (D) 4 hours

Last Answer : Answer: Option D

If is the difference in height between end points of a chain of length , the required slope correction is (A) h²/2l (B) h/2l (C) h²/l (D) 2h²/2l

Description : If is the difference in height between end points of a chain of length , the required slope correction is (A) h²/2l (B) h/2l (C) h²/l (D) 2h²/2l

Last Answer : (A) h²/2l

Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) Measuring angles to the point from at least two stations (C) Measuring angle at one station and distance from other (D) Measuring distance from two points on traverse line

Description : Which of the following methods of theodolite traversing is suitable for locating the details which are far away from transit stations? (A) Measuring angle and distance from one transit station (B) ... at one station and distance from other (D) Measuring distance from two points on traverse line

Last Answer : (B) Measuring angles to the point from at least two stations

Rate determining step in a reaction consisting of a number of steps inseries is the __________ step.(A) Fastest(B) Slowest(C) Intermediate(D) Data insufficient; can't be predicted

Description : Rate determining step in a reaction consisting of a number of steps inseries is the __________ step. (A) Fastest (B) Slowest (C) Intermediate (D) Data insufficient; can't be predicted

Last Answer : (B) Slowest

Which of the following is not a correct statement about the electrophilic substitution mechanism of benzene? (a) Benzene functions as a nucleophile. (b) Formation of a carbocation intermediate is the rate-determining step. (c) The carbocation intermediate contains an sp3 hybridized carbon in the ring. (d) The addition product is a frequently observed minor product.

Description : Which of the following is not a correct statement about the electrophilic substitution mechanism of benzene? (a) Benzene functions as a nucleophile. (b) Formation of a carbocation intermediate is the ... hybridized carbon in the ring. (d) The addition product is a frequently observed minor product.

Last Answer : The addition product is a frequently observed minor product.

Location of soundings by two angles from the shore requires establishing (A) One range line parallel to shore (B) One range line perpendicular to shore (C) Two range lines mutually perpendicular (D) No range line

Description : Location of soundings by two angles from the shore requires establishing (A) One range line parallel to shore (B) One range line perpendicular to shore (C) Two range lines mutually perpendicular (D) No range line

Last Answer : (D) No range line

An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of span 2l and rise h hinged at the crown, the horizontal reaction at the support, is (A) Wa/h (B) Wa/2h(C) 2W/ha(D) 2h/W

Description : An isolated load W is acting at a distance a from the left hand support, of a three hinged arch of  span 2l and rise h hinged at the crown, the horizontal reaction at the support, is  (A) Wa/h  (B) Wa/2h (C) 2W/ha (D) 2h/W

Last Answer : (B) Wa/2h

A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg

Description : A three hinged arch is loaded with an isolated load 1000 kg at a horizontal distance of 2.5 m from the crown, 1 m above the level of hinges at the supports 10 metres apart. The horizontal thrust is (A) 1250 kg (B) 125 kg (C) 750 kg (D) 2500 kg

Last Answer : (A) 1250 kg

In chain surveying tie lines are primarily provided (A) To check the accuracy of the survey (B) To take offsets for detail survey(C) To avoid long offsets from chain lines (D) To increase the number of chain lines

Description : In chain surveying tie lines are primarily provided  (A) To check the accuracy of the survey  (B) To take offsets for detail survey  (C) To avoid long offsets from chain lines  (D) To increase the number of chain lines 

Last Answer : (C) To avoid long offsets from chain lines 

Check lines (or proof lines) in Chain Surveying, are essentially required (A) To plot the chain lines (B) To plot the offsets (C) To indicate the accuracy of the survey work (D) To increase the out-turn

Description : Check lines (or proof lines) in Chain Surveying, are essentially required (A) To plot the chain lines (B) To plot the offsets (C) To indicate the accuracy of the survey work (D) To increase the out-turn

Last Answer : (C) To indicate the accuracy of the survey work

Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of offset should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Description : Offsets are measured with an accuracy of 1 in 40. If the point on the paper from both sources of error (due to angular and measurement errors) is not to exceed 0.05 cm on a scale of 1 cm = 20 m, the maximum length of ... should be limited to (A) 14.14 m (B) 28.28 m (C) 200 m (D) None of these

Last Answer : (B) 28.28 m

The perpendicular offset from the tan-get to the central point of the circular curve, is (A) (B) (C) R (1 - (D) R (1 -

Description : The perpendicular offset from the tan-get to the central point of the circular curve, is (A) (B) (C) R (1 - (D) R (1 -

Last Answer : Answer: Option C

Enlist the factors affecting on selection of survey station or survey line in chain survey.

Description : Enlist the factors affecting on selection of survey station or survey line in chain survey.

Last Answer : Following are the factors affecting on selection of survey station for chain surveying. 1) As far as possible the survey work should be based upon the basic principle of surveying i.e. working from whole ... level ground. 9) The survey lines should run as far as possible nearer to object.

Determining the difference in elevation between two points on the surface of the earth, is known as (A) Levelling (B) Simple levelling (C) Differential levelling (D) Longitudinal levelling

Description : Determining the difference in elevation between two points on the surface of the earth, is known as (A) Levelling (B) Simple levelling (C) Differential levelling (D) Longitudinal levelling

Last Answer : (C) Differential levelling

The most effective method of determining platform issues is to use a survey of A)personnel with the firm. B)individuals at the advertising agency. C)customers.D)marketers in the industry. E)advertising experts.

Description : The most effective method of determining platform issues is to use a survey of A)personnel with the firm. B)individuals at the advertising agency. C)customers.D)marketers in the industry. E)advertising experts.

Last Answer : C)customers

State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Description : State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Last Answer : 1) First reading is on bench mark point and should be noted in back sight(BS) column 2) Intermediate reading (IS) should be taken on the points between first and last station. 3) Last reading ... column of next page 6) Remark column should have denote First and Last RL along with change points.

State the important points kept in mind while recording the readings in level pages with respect first reading, intermediate readings, last reading, and change point, carry forward from one page to next page - Remarks.

Description : State the important points kept in mind while recording the readings in level pages with respect first reading, intermediate readings, last reading, and change point, carry forward from one page to next page - Remarks. 

Last Answer : The following points should be kept in mind while recording the reading in level pages. 1. The first reading should be always noted as back sight (B.S.) 2. All the intermediate readings should ... horizontal line represents only one station. 8. Readings of each station should be in one line only.

What are the positive and negative points about carbon offset?

Description : What are the positive and negative points about carbon offset?

Last Answer : answer:http://en.wikipedia.org/wiki/Carbon_offsets#Controversies This sounds like a homework question to me. Do you have a specific question with regards to Carbon Offsets?

The ratio of the deflections of the free end of a cantilever due to an isolated load at 1/3rd and 2/3rd of the span, is (A) 1/7 (B) 2/7 (C) 3/7 (D) 2/5

Description : The ratio of the deflections of the free end of a cantilever due to an isolated load at 1/3rd and  2/3rd of the span, is  (A) 1/7  (B) 2/7  (C) 3/7  (D) 2/5 

Last Answer : (B) 2/7 

The general expression for the B.M. of a beam of length l is the beam carries M = (wl/2) x - (wx²/2) (A) A uniformly distributed load w/unit length (B) A load varying linearly from zero at one end to w at the other end (C) An isolated load at mid span (D) None of these

Description : The general expression for the B.M. of a beam of length l is the beam carries M = (wl/2) x - (wx²/2)  (A) A uniformly distributed load w/unit length  (B) A load varying linearly from zero at one end to w at the other end  (C) An isolated load at mid span  (D) None of these 

Last Answer : (A) A uniformly distributed load w/unit length 

If the length of a cantilever carrying an isolated load at its free end is doubled, the deflection of the free end will increase by (A) 8 (B) 1/8 (C) 1/3 (D) 2

Description : If the length of a cantilever carrying an isolated load at its free end is doubled, the deflection of the free end will increase by (A) 8 (B) 1/8 (C) 1/3 (D) 2

Last Answer : (B) 1/8

The ratio of the maximum deflection of a cantilever beam with an isolated load at its free end and with a uniformly distributed load over its entire length, is (A) 1 (B) 24/15 (C) 3/8 (D) 8/3

Description : The ratio of the maximum deflection of a cantilever beam with an isolated load at its free end and with a uniformly distributed load over its entire length, is (A) 1 (B) 24/15 (C) 3/8 (D) 8/3

Last Answer : (D) 8/3

A cantilever beam rectangular in cross-section is subjected to an isolated load at its free end. If the width of the beam is doubled, the deflection of the free end will be changed in the ratio of (A) 8 (B) 1/8 (C) 1/2 (D) 3

Description : A cantilever beam rectangular in cross-section is subjected to an isolated load at its free end. If the  width of the beam is doubled, the deflection of the free end will be changed in the ratio of  (A) 8  (B) 1/8  (C) 1/2  (D) 3

Last Answer : (C) 1/2 

If is the difference in level between end points separated by , then the slope correction is [(h²/2l) + (h 4 /8l3 )]. The second term may be neglected if the value of in a 20 m distance is less than (A) ½ m (B) 1 m (C) 2 m (D) 3 m

Description : If is the difference in level between end points separated by , then the slope correction is [(h²/2l) + (h 4 /8l3 )]. The second term may be neglected if the value of in a 20 m distance is less than (A) ½ m (B) 1 m (C) 2 m (D) 3 m

Last Answer : (D) 3 m

Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in temperature causes a tape to increase in length and the measured distance is too large (C) The straight distance between end points of a suspended tape is reduced by an amount called the sag correction (D) A 100 m tape of cross section 10 mm × 0.25 mm stretches about 10 mm under 5 kg pull

Description : Pick up the incorrect statement from the following: (A) While measuring a distance with a tape of length 100.005 m, the distance to be increasing by 0.005 m for each tape length (B) An increase in ... ) A 100 m tape of cross section 10 mm 0.25 mm stretches about 10 mm under 5 kg pull

Last Answer : (B) An increase in temperature causes a tape to increase in length and the measured distance is too large

Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of curvature may be ignored and the level surface of the earth is assumed as horizontal (C) In surveys of large extent, the effect of curvature of the earth must be considered (D) All the above

Description : Pick up the correct statement from the following: (A) The directions of plumb lines suspended at different points in a survey are not strictly parallel (B) In surveys of small extent, the effect of ... of large extent, the effect of curvature of the earth must be considered (D) All the above

Last Answer : (D) All the above

Regarding plane-table survey, which of the following statements does not hold? (a) All the plotting work including contouring can be done in the field (b) It is quite suitable for small scale survey (c) Less number of control points are required (d) It can be done in all seasons

Description : Regarding plane-table survey, which of the following statements does not hold? (a) All the plotting work including contouring can be done in the field (b) It is quite suitable for small scale survey (c) Less number of control points are required (d) It can be done in all seasons

Last Answer : (d) It can be done in all seasons

The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing

Description : The plotting of inaccessible points in a plane-table survey can be done by the method of (a) Interpolation (b) Radiation (c) Intersection (d) Traversing

Last Answer : (c) Intersection

Globalization means --------------------------- : A. Establishing Company branches in other countries B. Adopting a global outlook C. Earning profits through Exports D. Attracting foreign Investments

Description : Globalization means --------------------------- : A. Establishing Company branches in other countries B. Adopting a global outlook C. Earning profits through Exports D. Attracting foreign Investments

Last Answer : Adopting a global outlook

The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Description : The distance of a given tool tip from the surface of workpiece is known as….. a.Tool length b.Tool length offset H c.Cutter radius d.Compensation

Last Answer : b.Tool length offset H

The distance of the pointer from the look-ahead buffer is called : a. Length b. Offset c. Triplet d. Code

Description : The distance of the pointer from the look-ahead buffer is called : a. Length b. Offset c. Triplet d. Code

Last Answer : b. Offset

A soluble system for synthesis of fatty acids have been isolated from avian liver, required for the formation of long chain fatty acids by this system is (A) ATP (B) Acetyl CoA (C) NADPH (D) All of these

Description : A soluble system for synthesis of fatty acids have been isolated from avian liver, required for the formation of long chain fatty acids by this system is (A) ATP (B) Acetyl CoA (C) NADPH (D) All of these

Last Answer : Answer : D