Differentiate between reduced bearing and whole circle bearing

Differentiate between reduced bearing and whole circle bearing
by

1 Answer

Answer :

Quadrantal Bearing/Reduced Bearing
Whole Circle Bearing
The horizontal angle made by a line with the magnetic north or south (whichever is closer from the line) in the eastward or westward direction is the Quadrantal Bearing or Reduced Bearing of the line
The horizontal angle made by a line with the magnetic north in the clockwise direction is the whole circle bearing of the line
Both magnetic north and south lines are considered as reference line in quadrantal bearing system
Only the magnetic north line is considered as reference line in whole circle bearing system. 
Both clockwise and anticlockwise angle from the reference line is Only taken
The clockwise angle from the reference line is Only taken
The value of the reduced bearing varies from 0° to 90° 
The value of the whole circle bearing varies from 0° to 360° 
by

Related questions

Define- 1. Whole circle bearing 2. Reduced bearing 3. Fore bearing 4. Back bearing

Description : Define- 1. Whole circle bearing 2. Reduced bearing 3. Fore bearing 4. Back bearing

Last Answer : 1.Whole circle bearing-  The bearing measures only in the clockwise direction from meridian or north direction is known as whole circle bearing. 2.Reduced bearing  The bearing measures with ... bearing  The bearing observed in the direction of opposite of survey is called fore bearing. 

Define the terms i) Fore Bearing, ii) Open traverse, iii) Closing error, iv) Reduced bearing

Description : Define the terms i) Fore Bearing, ii) Open traverse, iii) Closing error, iv) Reduced bearing

Last Answer : i) Fore bearing : The bearing observed in the direction of progress of survey in clockwise manner is called fore bearing  ii) Open traverse : When the first and last survey lines does ... north or south direction in clockwise or anticlockwise manner is known as reduced or quadrantal bearing. 

Define: i) W.C.B. ii) Reduced Bearing

Description : Define: i) W.C.B. ii) Reduced Bearing

Last Answer : i)Whole circle bearing: The bearing measures only in the clockwise direction from meridian or north direction is known as whole circle bearing.   ii) Reduced bearing: The bearing measured ... north or south direction in clockwise or anticlockwise manner is known as reduced or quadrant bearing 

Differentiate between plane and geodetic survey on any four points.

Description : Differentiate between plane and geodetic survey on any four points. 

Last Answer : Difference between Plane Surveying and Geodetic Surveying Points Plane Surveying Geodetic Surveying Definition Plane surveying is that type of surveying in which mean surface of ... Traditional survey equipment is used Precise and modern survey equipment are required

Differentiate between open traverse and closed traverse on any two points

Description : Differentiate between open traverse and closed traverse on any two points

Last Answer : Differentiation between Open Traverse and Closed Traverse Closed Traverse Open Traverse When a traverse forms a closed polygon it is called as Closed Traverse   When a traverse does not form a closed polygon it is ... angles = (2n + 4) x 90 There is no such check 

Differentiate between 'H.I. method' and 'Rise and Fall method' with respect to time, checks, application and simplicity.

Description : Differentiate between 'H.I. method' and 'Rise and Fall method' with respect to time, checks, application and simplicity. 

Last Answer : Sr. No. Point of difference H.I. method Rise and fall method 1 Time Less time required for calculations of RLs. More time is required for calculations ... simple, rapid involving less calculation.  Involves several calculations hence more laborious and time consuming.

Differentiate between plane of collimation and rise and fall method.

Description : Differentiate between plane of collimation and rise and fall method.

Last Answer : S.N Rise and fall method Plane of collimation 1 It is slow and more tedious. It is more rapid and less tedious  2 It is laborious as it involves more calculations. It is simple ... .S.-ΣF.S=ΣRise-Σfall =Last RL-First RL Arithmetical check ΣB.S.- ΣF.S=Last RL-First RL

Differentiate between simple levelling and differential levelling with neat sketch.

Description : Differentiate between simple levelling and differential levelling with neat sketch. 

Last Answer : S.N Simple Levelling Differential levelling 1 Instrument is not shifted till the end of survey work.  Instrument is shifted as per requirements. 2 In this difference in elevation between ... elevation between two points is more or any obstacle between them. 4

The whole circle bearing of a line is 290°. Its reduced bearing is (A) N 20° E (B) N 20° W (C) N 70° W (D) S 70° E

Description : The whole circle bearing of a line is 290°. Its reduced bearing is  (A) N 20° E (B) N 20° W (C) N 70° W (D) S 70° E

Last Answer : (C) N 70° W

If whole circle bearing of a line is 120°, its reduced bearing is (A) S 20° E (B) S 60° E (C) N 120° E (D) N 60° E

Description : If whole circle bearing of a line is 120°, its reduced bearing is  (A) S 20° E (B) S 60° E (C) N 120° E (D) N 60° E

Last Answer : (B) S 60° E

If the whole circle bearing of a line is 180°, its reduced bearing is (A) S 0° E (B) S 0° W (C) S (D) N

Description : If the whole circle bearing of a line is 180°, its reduced bearing is (A) S 0° E (B) S 0° W (C) S (D) N

Last Answer : (C) S

The reduced bearing of a line is N 87° W. Its whole circle bearing is (A) 87° (B) 273° (C) 93° (D) 3°

Description : The reduced bearing of a line is N 87° W. Its whole circle bearing is (A) 87° (B) 273° (C) 93° (D) 3°

Last Answer : (B) 273°

If the whole circle bearing of a line is 270°, its reduced bearing is (A) N 90° W (B) S 90° W (C) W 90° (D) 90° W

Description : If the whole circle bearing of a line is 270°, its reduced bearing is (A) N 90° W (B) S 90° W (C) W 90° (D) 90° W

Last Answer : (C) W 90°

Define: WCB and Quadrantal Bearing system

Description : Define: WCB and Quadrantal Bearing system

Last Answer : Ans.: 1)WCB:-In this system the bearing of a line is always measured clockwise for the north point of the reference meridian towards the line round the circle the angle thus measured is called ... the bearing of a line is measured clockwise from the north point or south point whichever is nearest .

Define true bearing and magnetic bearing.

Description : Define true bearing and magnetic bearing.

Last Answer : 1. True bearing – (i) The angle between true meridian or geographical north and any line known as true bearing. 2.Magnetic bearing-(i)The angle between magnetic meridian and any line is known as magnetic bearing.

Describe quadrantal bearing system. State the purpose it is used.

Description : Describe quadrantal bearing system. State the purpose it is used. 

Last Answer : Quadrantal Bearing - 1. The magnetic bearing of line measured clockwise or anticlockwise from north or south pole whichever is nearer. 2. These bearings are also called as reduced bearings. 3. ... lines in a closed traverse. 2. It is used to calculate back bearing for respective quadrants.

Define ‘ Fore bearing ’ & ‘ back bearing ’ of line with a neat sketch

Description : Define ‘ Fore bearing ’ & ‘ back bearing ’ of line with a neat sketch

Last Answer : Fore bearing : The bearing of line observed in the direction of progress of survey is called fore bearing of the line. Bearing of line AB is observed at A' towards B' is called as fore bearing of the line ... The bearing observed at B' towards A' is called as back bearing of the line AB'  

With neat sketch, write the procedure of measurement of fore bearing with compass.

Description : With neat sketch, write the procedure of measurement of fore bearing with compass.

Last Answer : For measuring fore bearing of line AB, i) Place the compass over station A, center and level it.  ii) Looking through eye slit towards object vane, bisect the ranging rod at station ... which coincides with horse hair at observer end. The observed reading is the fore bearing of line AB

Define the terms - dip of needle, magnetic bearing, fore bearing and back bearing.

Description : Define the terms - dip of needle, magnetic bearing, fore bearing and back bearing.

Last Answer : Dip of needle: It is downward inclination or small angle made by freely suspended magnetic needle with the horizontal. Magnetic bearing: Magnetic bearing of a survey line is the horizontal angle ... of line measured in backward direction or opposite direction of survey, is known as back bearing.

Find the back bearing of the following lines having fore bearing as given below: (i) PQ = N 55° 0' E (ii) EF == 280° 0' (iii) CD = S 58° 30' W (iv) OM= 180° 0'

Description : Find the back bearing of the following lines having fore bearing as given below: (i) PQ = N 55° 0' E (ii) EF == 280° 0' (iii) CD = S 58° 30' W (iv) OM= 180° 0'

Last Answer : i) F.B OF PQ = N 55°0 ’ E  B.B Of PQ = S 55°0 ’W  ii) F.B. Of EF = 280°0 ’   B.B OF EF = F.B -180°= 280°0 ’ -180° = 100°0 ’  iii) F.B OF CD = S 58°30’W  B.B OF CD = N 58°30’ E  iv) F.B OF GH = 180°  B.B OF GH = F.B -180°=180°-180°= 0°

Define the following terms: (i) Level surface {ii) Datum line (iii) Reduced level (iv) Axis of telescope

Description : Define the following terms: (i) Level surface {ii) Datum line (iii) Reduced level (iv) Axis of telescope

Last Answer : i)Level Surface : Any surface is parallel to mean spheroidal surface of earth is said to be a level surface. The water surface of still lake is also considered to be level surface. ii) ... an imaginary line passing through the optical Centre of object glass and optical Centre of the eye piece.

Why zero is marked at south end on a graduated circle of prismatic compass?

Description : Why zero is marked at south end on a graduated circle of prismatic compass?

Last Answer : As bearing of any line is measured with respective north direction, while observing north direction, reading should be 00 0'. Therefore when object vane is bisecting north direction, at the same ... get bearings with respective north direction always, zero is marked at south end of magnetic needle.

Whole circle bearing of a line is preferred to a quadrantal bearing merely because (A) Bearing is not completely specified by an angle (B) Bearing is completely specified by an angle (C) Sign of the correction of magnetic declination is different in different quadrants (D) Its Trigonometrical values may be extracted from ordinary tables easily

Description : Whole circle bearing of a line is preferred to a quadrantal bearing merely because (A) Bearing is not completely specified by an angle (B) Bearing is completely specified by an angle ... different in different quadrants (D) Its Trigonometrical values may be extracted from ordinary tables easily

Last Answer : (B) Bearing is completely specified by an angle

What is changing face

Description : As used in survey

Last Answer : It's the operation of changing the face of telescope from left to right and vice versa.

The process of surveying is therefore in three stages namely:

Description : The process of surveying is therefore in three stages namely:

Last Answer : (i) Taking a general view This part of the definition is important as it indicates the need to obtain an overall picture of what is required before any type of survey work is undertaken. In ... of quantities, datasheets, drawings and in land surveying maps and plan showing the features on the land.

Tacheometric Surveying

Description : Tacheometric Surveying

Last Answer : Tacheometric is a branch of surveying in which horizontal and vertical distances are determined by taking angular observation with an instrument known as a tachometer. Tacheometric surveying is adopted in rough ... be prepared for investigation works within a short time on the basis of such survey.

Explain the temporary adjustments of prismatic compass.

Description : Explain the temporary adjustments of prismatic compass.

Last Answer : Temporary Adjustments of Prismatic Compass 1. Fixing the compass to the tripod The compass is fixed on a tripod by rotating screw head of tripod stand. 2. Centering the compass The prismatic compass ... prism is moved using focusing stud so that readings on graduated ring will be seen clearly. 

State the fundamental axes and mention their relationship for a dumpy level.

Description : State the fundamental axes and mention their relationship for a dumpy level.

Last Answer : Fundamental axis of dumpy level are as follows; i) The vertical axis ii) The axis of bubble tube iii) The line of collimation iv) The axis of the telescope Relationship between ... iii) Axis of telescope and line of collimation should coincide when dumpy level is correctly leveled.

Describe with neat sketch, the optical square and explain its principle.

Description : Describe with neat sketch, the optical square and explain its principle.

Last Answer : Principal of optical square :- the angle between the first incident ray and the last reflected ray is twice the angle between the two mirrors OR If there are two plane mirrors whose reflecting surfaces ... is 450 while that between the first incident ray and last reflected ray is 900 .  

What consideration would you have while selecting survey stations and survey lines in a chain survey?

Description : What consideration would you have while selecting survey stations and survey lines in a chain survey?

Last Answer : Following points to be considered while selecting survey stations and survey lines 1) Main survey station should be mutually visible. 2) All triangles should be well conditioned. 3) The survey line should lie ... of the area so as to form the frame work of triangles on it to cover maximum area. 

What are offsets? How are they taken and recorded? Explain with sketch.

Description : What are offsets? How are they taken and recorded? Explain with sketch.

Last Answer : Offsets are lateral measurement to the base line. They are Located by judgment if short And by instruments (optical square or cross staff) if long and measured by metallic tape and shown with their chainages on base line

Define fly leveling and profile leveling

Description : Define fly leveling and profile leveling

Last Answer : Fly Leveling adopted to transfer bench marks from one place to other .In this leveling only FS & BS are taken.  Profile leveling:- The operation in which the object is to determine the ... known distanced apart along a given line to obtained the accurate outline of the surface of the ground 

Define : 1) Bench mark 2) Datum surface 3) Line of collimation 4) Change Point

Description : Define : 1) Bench mark 2) Datum surface 3) Line of collimation 4) Change Point 

Last Answer : 1) Bench mark: - It is a fixed reference point of known elevation.. 2)Datum surface :-It is any arbitrarily assumed level surface from which vertical distance are measured 3) Line of collimation:- ... which the fore and back sights are taken.  It is the point denoting the shifting of the level.

State the situation where plane table is suitable.

Description : State the situation where plane table is suitable. 

Last Answer : 1) It is most suitable for preparing small scale maps 2) It is suitable in magnetic are where compass survey is not reliable 3) It is most suitable for filling in details between stations fixed by triangulation 4) It is suitable where accuracy is not required.

How would you detect presence of local attraction at a place ?

Description : How would you detect presence of local attraction at a place ?

Last Answer : The presence of local attraction may be detected by finding difference of FB & BB of the line. If the fore bearing and back bearing difference is 1800 then there is no local attraction at both ... difference is not equal to 1800 then there is local attraction at both or any one station. 

State the two uses of survey based on geodetic surveying

Description : State the two uses of survey based on geodetic surveying

Last Answer : Two uses of survey based on geodetic surveying:- i) To determine the precise position s on the surface of the earth. ii) Preparation of maps of large area like map of a country, state ... ) Establishment of GTS bench Marks across the country. iv) Preparation of military maps for defense purposes.

Write errors in leveling and corresponding precaution

Description : Write errors in leveling and corresponding precaution

Last Answer : i) Instrument error with respect to bubble tube, leveling staff. 1.If bubble tube is sluggish it may apparently be in the center though the bubble line is not horizontal. Precaution - ... reading. Precaution- Leveling should be properly done by bringing the bubble of bubble tube at Centre.

State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Description : State the important points kept in mind while recording the staff readings in level pages with respect first reading, intermediate reading, last reading, change point, carry forward from one page to next page-Remark

Last Answer : 1) First reading is on bench mark point and should be noted in back sight(BS) column 2) Intermediate reading (IS) should be taken on the points between first and last station. 3) Last reading ... column of next page 6) Remark column should have denote First and Last RL along with change points.

State the purposes of following methods of leveling. i)Profile leveling, ii)Fly leveling, iii)Check leveling iv)Reciprocal leveling

Description : State the purposes of following methods of leveling. i)Profile leveling, ii)Fly leveling, iii)Check leveling iv)Reciprocal leveling

Last Answer : 1. Profile leveling- To determine the undulation of ground surface along given line for alignment of road, canal or pipe, railway line 2. Fly leveling-It is used to for connecting B.M. to ... is used to find the difference in leveling between two points two point obstructed due to river or pond.

Draw a sketch and explain how to find height of chajja or slab using dumpy level.

Description : Draw a sketch and explain how to find height of chajja or slab using dumpy level.

Last Answer : Explanation : 1. First the back sight reading is taken on floor level whose RL is known to us; from which RL of instrument axis can be find out by adding RL of BM and BS reading. 2. Now ... staff reading. 4. Finally height of chajja is calculated as RL of slab bottom -  RL of floor top.

Explain temporary adjustment.

Description : Explain temporary adjustment.

Last Answer : 1) Place the telescope parallel to foot screw (fig. a) 2) Bring the bubble at Centre by moving foot screw inward or outward simultaneously. 3) Then turn the telescope through 900 so that it ... 6) Once both positions give centered bubble, leveling of instrument is said to be completed.

State fundamental lines and their relationships with each other of dumpy level.

Description : State fundamental lines and their relationships with each other of dumpy level.

Last Answer : Fundamental axes of dumpy level : i) The vertical axis ii) The axis of bubble tube iii) The line of collimation iv) The axis of the telescope Relations of Fundamental axes : i) The ... to the axis of the bubble tube. iii) Axis of telescope and line of collimation should coincide.

State advantages of plane table survey one each with respect to booking and suitability

Description : State advantages of plane table survey one each with respect to booking and suitability

Last Answer : Booking of observations: i) Field work and plotting work done simultaneously ii) ) Notes of measurement are seldom required and possibility of mistakes in booking is eliminated. Suitability of PT ... and work where great accuracy is not required. ii) Mostly suitable for survey in plain terrain

State two advantages of telescopic alidade over simple alidade.

Description : State two advantages of telescopic alidade over simple alidade.

Last Answer : Advantages of telescopic alidade : i) Telescopic alidade is more accurate in bisection than simple alidade ii) Telescopic alidade is useful in comparatively longer range objects. iii) It can be easily ... is not possible by simple alidade. iv) It gives quicker bisection which saves time ultimately.

Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.

Description : Write any four advantages of intersection method of plane tabling over radiation method of plane tabling.

Last Answer : Advantages of intersection method: 1. Interection method requires less ground distance measurement than radiation method. 2. By this method we can locate inaccessible points which cannot be ... to radiation method, intersection method eliminates undulation error, bisection error and plotting errors.

Draw sketch and explain method of traversing of plane table surveying.

Description : Draw sketch and explain method of traversing of plane table surveying. 

Last Answer : Procedure: 1.Set plane table over station A use plumbing fork for transferring station point from ground on sheet. Draw the direction of magnetic meridian with the help of compass. 2. With the ... scale Similarly, the table can be set at other successive station and traverse is completed.

Define orientation. State two methods of orientation. Which method is most accurate and why?

Description : Define orientation. State two methods of orientation. Which method is most accurate and why? 

Last Answer : Orientation is the process of keeping plane table in same position as that is occupied in previous station. Methods of orientation: i) Magnetic meridian method using trough compass ii) Back ... and not by using trough compass. Therefore there is no error occurring due to local attraction.

State temporary adjustments of prismatic compass

Description : State temporary adjustments of prismatic compass

Last Answer : a) Setting the prismatic compass over prefixed survey station b) Centering the compass over nail point of station using plumb bob c) Leveling of compass in horizontal plane using level tube d) Focusing of prism by raising and lowering the focussing stud

Write the functions of the following components of prismatic compass i) Prism, ii) Lifting pin, iii) Prism cap, iv) Agate cap

Description : Write the functions of the following components of prismatic compass i) Prism, ii) Lifting pin, iii) Prism cap, iv) Agate cap

Last Answer : i) Prism: Reading printed on horizontal face of compass ring can be read from vertical position  ii) Lifting pin: When the instrument not in use the sight vane passes against the lifting pin which lift ... piece of hard glass provided on top of pivoted point, to reduce wear and tear of the point

Define Dip and deflection of needle.

Description : Define Dip and deflection of needle.

Last Answer : Dip of the magnetic needle: It is the upward or downward movement of magnetic needle in vertical plane due to earth's gravitational force is known as dip of needle. Deflection of needle : ... west direction, that horizontal angle between magnetic and true north is said to be declination of needle.