At the socket and spigot joint, (A) Enlarged end of the pipe is called socket (B) Normal end of the pipe is called spigot (C) Spigot is fitted into the socket (D) All the above

At the socket and spigot joint,
(A) Enlarged end of the pipe is called socket
(B) Normal end of the pipe is called spigot
(C) Spigot is fitted into the socket
(D) All the above
by

1 Answer

Answer :

(D) All the above
by

Related questions

The type of joint generally used in cast iron pipes, is (A) Socket and spigot joint (B) Flanged joint (C) Dresser coupling joint (D) All the above

Description : The type of joint generally used in cast iron pipes, is (A) Socket and spigot joint (B) Flanged joint (C) Dresser coupling joint (D) All the above

Last Answer : (D) All the above

In pumping stations, the type of joint generally used, is (A) Socket and spigot joint (B) Flanged joint (C) Expansion joint (D) Dresser coupling joint

Description : In pumping stations, the type of joint generally used, is (A) Socket and spigot joint (B) Flanged joint (C) Expansion joint (D) Dresser coupling joint

Last Answer : (B) Flanged joint

The joint used for joining the plain ends of cast iron pipes, is (A) Flanged joint (B) Socket and spigot joint (C) Dresser coupling joint (D) Flexible joint

Description : The joint used for joining the plain ends of cast iron pipes, is  (A) Flanged joint  (B) Socket and spigot joint  (C) Dresser coupling joint  (D) Flexible joint 

Last Answer : (C) Dresser coupling joint 

Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Description : Which of the subsequent must not be a section of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Last Answer : d) Collar

Which of the following is not a part of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Description : Which of the following is not a part of cotter joint? a) Socket b) Spigot c) Cotter d) Collar

Last Answer : d) Collar

Explain About Spigot And Socket Joint?

Description : Explain About Spigot And Socket Joint?

Last Answer : This joint is generally used to connect cast iron pipes which are buried in ground .This is also suitable for straight pipe line carrying water and this joint has less rigidity.

A backing ring is used inside the pipe joint when making a (a) butt weld (b) fillet weld (c) sleeve weld (d) socket weld (e) tube weld.

Description : A backing ring is used inside the pipe joint when making a (a) butt weld (b) fillet weld (c) sleeve weld (d) socket weld (e) tube weld.

Last Answer : (a) butt weld

Pick up the incorrect statement regarding a master trap from the following: (A) It is provided in between the lower end of the house drain and the street sewer (B) It is provided a cleaning eye at the top of the trap (C) The mica flap valve which opens inwards only, is fitted at the top of the inlet pipe (D) The water seal is less than that of ordinary traps

Description : Pick up the incorrect statement regarding a master trap from the following: (A) It is provided in between the lower end of the house drain and the street sewer (B) It is provided a cleaning eye at the ... fitted at the top of the inlet pipe (D) The water seal is less than that of ordinary traps

Last Answer : (D) The water seal is less than that of ordinary traps

Glass pipes can be joined by (A) Flanges (B) Welding (C) Soldering (D) Bell and spigot joint

Description : Glass pipes can be joined by (A) Flanges (B) Welding (C) Soldering (D) Bell and spigot joint

Last Answer : (D) Bell and spigot joint

__________ joint is usually used for joining cast iron pipes mostly used for temporary pipelines, where it may be necessary to dismantle & reassemble the pipeline very frequently. (A) Collar (B) Flanged (C) Bell and Spigot (D) Expansion

Description : __________ joint is usually used for joining cast iron pipes mostly used for temporary pipelines, where it may be necessary to dismantle & reassemble the pipeline very frequently. (A) Collar (B) Flanged (C) Bell and Spigot (D) Expansion

Last Answer : Option B

Antisyphonage pipe is fitted A. At the end of septic tanks B. On manholes C. With a W.C. trap D. At the beginning of sewer line

Description : Antisyphonage pipe is fitted A. At the end of septic tanks B. On manholes C. With a W.C. trap D. At the beginning of sewer line

Last Answer : ANS: C

A pipe of length more than double the diameter of orifice fitted externally or internally to the orifice is called a (A) Notch (B) Weir (C) Mouthpiece (D) Nozzle

Description : A pipe of length more than double the diameter of orifice fitted externally or internally to the orifice is called a (A) Notch (B) Weir (C) Mouthpiece (D) Nozzle

Last Answer : Answer: Option C

The valve fitted closely in a recess against an opening in a pipe, is generally (A) Wedge shaped circular disc (B) Spherical disc (C) Parallelepiped disc (D) Conical shaped circular disc

Description : The valve fitted closely in a recess against an opening in a pipe, is generally (A) Wedge shaped circular disc (B) Spherical disc (C) Parallelepiped disc (D) Conical shaped circular disc

Last Answer : (A) Wedge shaped circular disc

An endpoint of an inter-process communication flow across a computer network is called a. socket b. pipe c. port d. machine

Description : An endpoint of an inter-process communication flow across a computer network is called a. socket b. pipe c. port d. machine

Last Answer : a. socket

An endpoint of an inter-process communication flow across a computer network is called a. socket b. pipe c. port d. machine

Description : An endpoint of an inter-process communication flow across a computer network is called a. socket b. pipe c. port d. machine

Last Answer : a. socket

A knuckle joint is also called socket pin joint. a) True b) False

Description : A knuckle joint is also called socket pin joint. a) True b) False

Last Answer : b) False

Enlarged head of a supporting column of a flat slab is technically known as (A) Supporting end of the column (B) Top of the column (C) Capital (D) Drop panel

Description : Enlarged head of a supporting column of a flat slab is technically known as (A) Supporting end of the column (B) Top of the column (C) Capital (D) Drop panel

Last Answer : Answer: Option C

How common is it to feel a joint pop out of it's socket?

Description : How common is it to feel a joint pop out of it's socket?

Last Answer : You might want to speak to your doctor. The tearing is upsetting. I doubt they’re actually dislocating, but it’s probably kind of not good on your joints.

What is the location of a ball and socket joint in the human body? -Biology

Description : What is the location of a ball and socket joint in the human body? -Biology

Last Answer : answer:

What is a ball and socket joint? -Biology

Description : What is a ball and socket joint? -Biology

Last Answer : answer:

Friction is lessened in ball-and-socket joint by

Description : Friction is lessened in ball-and-socket joint by

Last Answer : Friction is lessened in ball-and-socket joint by A. Coelomic fluid B. Synovial fluid C. Pericardial fluid D. Mucin

Which of the following is/are not correctly matched pairs? (i) Ball and socket joint -Between humerus and pectoral girdle (ii) Pivot joint - Between c

Description : Which of the following is/are not correctly matched pairs? (i) Ball and socket joint -Between humerus and pectoral girdle (ii) Pivot joint - Between c

Last Answer : Which of the following is/are not correctly matched pairs? (i) Ball and socket joint -Between humerus and pectoral ... , b-iii, c-ii, d-v, e-iv`

How a ball and socket joint work?

Description : How a ball and socket joint work?

Last Answer : allow the joints to move in any direction.

Which one of the following pairs of structures is correctly matched with their corrected description? Structures Description (a) Tibia and fibula Both form parts of knee joint (b) Cartilage and cornea No blood supply but do require oxygen for respiratory need (c) Shoulder joint and Ball and socket type elbow joint of joint (d) Premolars and molars 20 in all and 3 rooted

Description : Which one of the following pairs of structures is correctly matched with their corrected description? Structures Description (a) Tibia and fibula Both form parts of knee joint (b) Cartilage and cornea No ... and socket type elbow joint of joint (d) Premolars and molars 20 in all and 3 rooted

Last Answer : (b) it is a non-living layer

Elbow joint is an example of (a) hinge joint (b) gliding joint (c) ball and socket joint (d) pivot joint.

Description : Elbow joint is an example of (a) hinge joint (b) gliding joint (c) ball and socket joint (d) pivot joint.

Last Answer : (a) hinge joint

Which of the following joints would allow no movements? (a) Synovial joint (b) Ball and socket joint (c) Fibrous joint (d) Cartilaginous joint

Description : Which of the following joints would allow no movements? (a) Synovial joint (b) Ball and socket joint (c) Fibrous joint (d) Cartilaginous joint

Last Answer : (c) Fibrous joint

__________ joint is mostly used for joining pipes carrying water at low pressure. (A) Nipple (B) Socket (C) Union

Description : __________ joint is mostly used for joining pipes carrying water at low pressure. (A) Nipple (B) Socket (C) Union

Last Answer : Option B

Vena-contracta pressure tapping is at a distance __________ from the position of an orificemeter fitted in a pipe of internal diameter 'd' (A) d (B) 0.5 d (C) 2d (D) 4d

Description : Vena-contracta pressure tapping is at a distance __________ from the position of an orificemeter fitted in a pipe of internal diameter 'd' (A) d (B) 0.5 d (C) 2d (D) 4d

Last Answer : (B) 0.5 d

A mercury (specific gravity = 13.6) manometer connected across an orificemeter fitted in a pipe shows a manometer reading of 2 cms. If the manometer liquid is changed to carbon tetrachloride (specific gravity = 1.6), then for the same flow rate of water the new manometer reading will be __________ cms. (A) 17 (B) 42(C) 84 (D) 1.8

Description : A mercury (specific gravity = 13.6) manometer connected across an orificemeter fitted in a pipe shows a manometer reading of 2 cms. If the manometer liquid is changed to carbon tetrachloride (specific gravity = 1.6), then ... new manometer reading will be __________ cms. (A) 17 (B) 42 (C) 84 (D) 1.8

Last Answer : __________ cms. (A) 17

A 2" gate valve fitted in a pipe is replaced by a similar globe valve. Pressure drop in gate valve was Δp. For the same discharge, the pressure drop across globe valve is (A) Δp (B) < Δp (C) > Δp (D) Δp

Description : A 2" gate valve fitted in a pipe is replaced by a similar globe valve. Pressure drop in gate valve was Δp. For the same discharge, the pressure drop across globe valve is (A) Δp (B) < Δp (C) > Δp (D) Δp

Last Answer : (C) > Δp

In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle is maximum, when the head lost due to friction in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Description : In case of a pipe exit fitted with a nozzle, the (A) Conversion of kinetic head to pressure head is facilitated (B) Conversion of pressure head to kinetic head is facilitated (C) Power transmitted through the nozzle ... in the pipe is equal to one third of the total supply head (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Steel pipe are (A) Suitable for withstanding high internal pressure (B) Connected by riveted or welded joints (C) Generally laid underground and no expansion joint is required (D) Likely to last 100 years under ordinary conditions

Description : Steel pipe are  (A) Suitable for withstanding high internal pressure  (B) Connected by riveted or welded joints  (C) Generally laid underground and no expansion joint is required  (D) Likely to last 100 years under ordinary conditions 

Last Answer : (D) Likely to last 100 years under ordinary conditions 

If d is the diameter of the pipe, p is the total internal pressure, f is the permissible tensile stress and n is the effective of the joint, the thickness t of metal pipe, is (A) n (pd/2f) (B) (1/n) (pd/2f) (C) (1/n) (pd/3f) (D) (1/n) (pf/d

Description : If d is the diameter of the pipe, p is the total internal pressure, f is the permissible tensile stress  and n is the effective of the joint, the thickness t of metal pipe, is  (A) n (pd/2f)  (B) (1/n) (pd/2f)  (C) (1/n) (pd/3f)  (D) (1/n) (pf/d

Last Answer : (B) (1/n) (pd/2f) 

While removing the second primary molar of a 9 years-old child, the apical ¼ of the root fractures and stays in the socket, A. You will just leave it and observe it B. You take surgically by a lingual flap C. You try to take out by using a root apex elevator D. You use a fine-end forceps to take it out

Description : While removing the second primary molar of a 9 years-old child, the apical ¼ of the root fractures and stays in the socket, A. You will just leave it and observe it B. You take surgically by a lingual ... try to take out by using a root apex elevator D. You use a fine-end forceps to take it out

Last Answer : A. You will just leave it and observe it

Is it necessary to get fitted for a sports bra the same way it is necessary to be fitted for a normal bra?

Description : Is it necessary to get fitted for a sports bra the same way it is necessary to be fitted for a normal bra?

Last Answer : It is a good idea to be fitted for a sports bra to ensure that you are going to receive the proper support and movement. Many specialty shops have trained professionals that will help you to selcet the correct fit.

The distribution of the forces along the length of key fitted in a shaft (A) Varies linearly (B) Is uniform throughout (C) Varies exponentially, being more near the torque-input end (D) Varies exponentially, being less near the torque-input end

Description : The distribution of the forces along the length of key fitted in a shaft (A) Varies linearly (B) Is uniform throughout (C) Varies exponentially, being more near the torque-input end (D) Varies exponentially, being less near the torque-input end

Last Answer : (C) Varies exponentially, being more near the torque-input end

Which of the following fastening devices has a head at one end and a nut fitted to the other? (A) Bolt (B) Stud (C) Top bolt (D) None of these

Description : Which of the following fastening devices has a head at one end and a nut fitted to the other? (A) Bolt (B) Stud (C) Top bolt (D) None of these

Last Answer : Option B

Which of the following fastening devices has a head at one end and a nut fitted to the other? (A) Bolt (B) Stud (C) Top bolt (D) None of these

Description : Which of the following fastening devices has a head at one end and a nut fitted to the other? (A) Bolt (B) Stud (C) Top bolt (D) None of these

Last Answer : Option B

Sluice valves are fitted in a distribution system (A) Along straight length of pipes at suitable intervals (B) At the junctions of the pipes (C) At the branching off points of sub-mains (D) All the above

Description : Sluice valves are fitted in a distribution system (A) Along straight length of pipes at suitable intervals (B) At the junctions of the pipes (C) At the branching off points of sub-mains (D) All the above

Last Answer : (D) All the above

Pick up the incorrect statement from the following regarding fire hydrants (A) Fire hydrants are fitted in water mains at 100 m to 150 m apart at fire (B) The minimum water pressure hydrants, is kept 1.5 kg/cm2 (C) The water at pressure 1 to 1.5 kg/cm2 is made available for 4 to 5 hours for constant use (D) None of these

Description : Pick up the incorrect statement from the following regarding fire hydrants (A) Fire hydrants are fitted in water mains at 100 m to 150 m apart at fire (B) The minimum water pressure hydrants, is kept 1.5 kg/ ... to 1.5 kg/cm2 is made available for 4 to 5 hours for constant use (D) None of these

Last Answer : (D) None of these

Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Description : Cross hairs in surveying telescopes, are fitted (A) In the objective glass (B) At the centre of the telescope (C) At the optical centre of the eye piece (D) In front of the eye piece

Last Answer : (D) In front of the eye piece

The diaphragm of a stadia theodolite is fitted with two additional (A) Horizontal hairs (B) Vertical hairs (C) Horizontal and two vertical hairs (D) None of these

Description : The diaphragm of a stadia theodolite is fitted with two additional (A) Horizontal hairs (B) Vertical hairs (C) Horizontal and two vertical hairs (D) None of these

Last Answer : (A) Horizontal hairs

The theodolites used for making tacheometric observations by optical wedge system, are (A) Provided with stadia hairs in front of eye piece (B) Not provided with stadia hairs at all (C) Fitted with a glass wedge inside the telescope (D) Fitted with a glass wedge in front of telescope

Description : The theodolites used for making tacheometric observations by optical wedge system, are (A) Provided with stadia hairs in front of eye piece (B) Not provided with stadia hairs at all (C) Fitted with a glass wedge inside the telescope (D) Fitted with a glass wedge in front of telescope

Last Answer : (D) Fitted with a glass wedge in front of telescope

a tacheometer is fitted with an anal-latic lens (A) Additive constant is 100, multiplying constant is zero (B) Multiplying constant is 100, additive constant is zero (C) Both multiplying and additive constants are 100 (D) Both multiplying and additive constants are 50

Description : a tacheometer is fitted with an anal-latic lens (A) Additive constant is 100, multiplying constant is zero (B) Multiplying constant is 100, additive constant is zero (C) Both multiplying and additive constants are 100 (D) Both multiplying and additive constants are 50

Last Answer : (B) Multiplying constant is 100, additive constant is zero

To avoid large centering error with very short legs, observations are generally made (A) To chain pins (B) By using optical system for centering the theodolite (C) To a target fixed on theodolite tripod on which theodolite may be fitted easily (D) All the above

Description : To avoid large centering error with very short legs, observations are generally made (A) To chain pins (B) By using optical system for centering the theodolite (C) To a target fixed on theodolite tripod on which theodolite may be fitted easily (D) All the above

Last Answer : (C) To a target fixed on theodolite tripod on which theodolite may be fitted easily

A river is said to be of uniform section if in its section A) A segment of a circle can be fitted (B) A parabolic section can be fitted (C) A rectangular section can be fitted (D) All the above

Description : A river is said to be of uniform section if in its section A) A segment of a circle can be fitted (B) A parabolic section can be fitted (C) A rectangular section can be fitted (D) All the above

Last Answer : Answer: Option D

Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration permanently. 4. Have nearly uniform discharge. Which of these statements are corrects? (a) 1, 2 & 4 only (b) 1, 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Description : Consider the following statements: Air vessels are fitted on the suction and delivery sides of a reciprocating pump to 1. Achieve higher speed without separation. 2. Reduce work in overcoming frictional resistance. 3. Avoid excessive vibration ... 2 & 3 only (c) 2, 3 & 4 only (d) 1, 2, 3 & 4

Last Answer : (d) 1, 2, 3 & 4

Most commonly used joint in the underground pipe lines is the (A) Sleeve joint (B) Coupling (C) Flange (D) Expansion joint

Description : Most commonly used joint in the underground pipe lines is the (A) Sleeve joint (B) Coupling (C) Flange (D) Expansion joint

Last Answer : (A) Sleeve joint

Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Description : Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion ... due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Last Answer : (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings

Describe The Methods Of Protecting Leakage At The Pipe Joint?

Description : Describe The Methods Of Protecting Leakage At The Pipe Joint?

Last Answer :  Threads joints should be fixed applying red lead, white lead, dry point etc. in the threads, bound the pipe threads using twine and tightened them fully with a suitable wrench.  Flanged joint should ... , leather, card board or soft metal in metal in between the inner sides of both the flanges.