Describe The Methods Of Protecting Leakage At The Pipe Joint?

Describe The Methods Of Protecting Leakage At The Pipe Joint?
by

1 Answer

Answer :

 Threads joints should be fixed applying red lead, white lead, dry point etc. in the threads, bound the pipe threads using twine and tightened them fully with a suitable wrench.
 Flanged joint should be fixed using a washer of rubber, leather, card board or soft metal in metal in between the inner sides of both the flanges.
by

Related questions

Q1. Why should preventive measures and biological control methods be preferred for protecting crops? -Science

Description : Q1. Why should preventive measures and biological control methods be preferred for protecting crops? -Science

Last Answer : Over exposure of chemicals leads to environmental problems hence, biological methods are preferred for protecting crops from pathogens, insects and rodents along with increasing the production. Since chemicals are ... feed on it, hence bio-pesticides are used as the safe way of crop protection.

The maximum pressure which the pipe can withstand without any leakage during hydrostatic pressure test, is called (A) Working pressure (B) Design pressure (C) Test pressure (D) Hydrostatic pressure

Description : The maximum pressure which the pipe can withstand without any leakage during hydrostatic pressure test, is called (A) Working pressure (B) Design pressure (C) Test pressure (D) Hydrostatic pressure

Last Answer : (C) Test pressure

The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid(C) The flow of fluid through the pipe is suddenly brought to rest by closing of the valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Description : The hammer blow in pipes occurs when (A) There is excessive leakage in the pipe (B) The pipe bursts under high pressure of fluid (C) The flow of fluid through the pipe is suddenly brought to ... valve (D) The flow of fluid through the pipe is gradually brought to rest by closing of the valve

Last Answer : Answer: Option C

Two pipe P & Q fill a tab in 5 hrs and 20 hrs respectively. If both the pipes are open then due to the leakage, it took 30mins more to fill the tab. If the tab is full, how long will it take for the leakage alone to empty the tank? A) 28 B) 24 C) 36 D) 12

Description : Two pipe P & Q fill a tab in 5 hrs and 20 hrs respectively. If both the pipes are open then due to the leakage, it took 30mins more to fill the tab. If the tab is full, how long will it take for the leakage alone to empty the tank? A) 28 B) 24 C) 36 D) 12

Last Answer : C Part filled by(P+Q) in 1 hr = 1/5 + 1/20 = ¼ So P & Q together can fill the tank in 4 hrs. Work done by the leak in 1 hr = 1 / 4 - 2/9 Leak will empty the tank in 36 hrs.

For joints in service in the creep range which of the following is recommended by ASME B16.5? a) Replacement of the joint after 1,000,000 hours of service. b) Periodic tightening of the bolts to prevent leakage. c) Immediate replacement is recommended if the material operates in the creep range. d) Regular flow detection inspection of the piping to fitting welds.

Description : For joints in service in the creep range which of the following is recommended by ASME B16.5? a) Replacement of the joint after 1,000,000 hours of service. b) Periodic tightening of ... the material operates in the creep range. d) Regular flow detection inspection of the piping to fitting welds.

Last Answer : b) Periodic tightening of the bolts to prevent leakage.

During an audit and expert examines the facility for…. a) Energy leakage b) Reduction c) Energy conservation d) None of the above

Description : During an audit and expert examines the facility for…. a) Energy leakage b) Reduction c) Energy conservation d) None of the above

Last Answer : Energy leakage

Describe the leakage current in a transmission line and in what unit it is expressed.

Description : Describe the leakage current in a transmission line and in what unit it is expressed.

Last Answer : The small amount of current that flows through the dielectric between two wires of a transmission line and is expressed in micro ohms per unit length.

Describe the procedure to locate leakage in Compressed Natural Gas Fuel supply system of a car. State relevant precaution.

Description : Describe the procedure to locate leakage in Compressed Natural Gas Fuel supply system of a car. State relevant precaution.

Last Answer : Procedure to locate Leakage in Compressed Natural Gas Fuel Supply System of a Car: 1. The first indicator is the foul smelling agent present in CNG.. 2. The second level of test you can do is to take a ... , incense sticks, etc. 2. Close the CNG regulator and 3. Put the safety cap on the cylinder.

Describe the concept of leakage flux, useful flux and fringing with neat diagram.

Description : Describe the concept of leakage flux, useful flux and fringing with neat diagram.

Last Answer : Leakage Flux

A backing ring is used inside the pipe joint when making a (a) butt weld (b) fillet weld (c) sleeve weld (d) socket weld (e) tube weld.

Description : A backing ring is used inside the pipe joint when making a (a) butt weld (b) fillet weld (c) sleeve weld (d) socket weld (e) tube weld.

Last Answer : (a) butt weld

Most commonly used joint in the underground pipe lines is the (A) Sleeve joint (B) Coupling (C) Flange (D) Expansion joint

Description : Most commonly used joint in the underground pipe lines is the (A) Sleeve joint (B) Coupling (C) Flange (D) Expansion joint

Last Answer : (A) Sleeve joint

Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Description : Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion ... due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Last Answer : (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings

At the socket and spigot joint, (A) Enlarged end of the pipe is called socket (B) Normal end of the pipe is called spigot (C) Spigot is fitted into the socket (D) All the above

Description : At the socket and spigot joint, (A) Enlarged end of the pipe is called socket (B) Normal end of the pipe is called spigot (C) Spigot is fitted into the socket (D) All the above

Last Answer : (D) All the above

Steel pipe are (A) Suitable for withstanding high internal pressure (B) Connected by riveted or welded joints (C) Generally laid underground and no expansion joint is required (D) Likely to last 100 years under ordinary conditions

Description : Steel pipe are  (A) Suitable for withstanding high internal pressure  (B) Connected by riveted or welded joints  (C) Generally laid underground and no expansion joint is required  (D) Likely to last 100 years under ordinary conditions 

Last Answer : (D) Likely to last 100 years under ordinary conditions 

If d is the diameter of the pipe, p is the total internal pressure, f is the permissible tensile stress and n is the effective of the joint, the thickness t of metal pipe, is (A) n (pd/2f) (B) (1/n) (pd/2f) (C) (1/n) (pd/3f) (D) (1/n) (pf/d

Description : If d is the diameter of the pipe, p is the total internal pressure, f is the permissible tensile stress  and n is the effective of the joint, the thickness t of metal pipe, is  (A) n (pd/2f)  (B) (1/n) (pd/2f)  (C) (1/n) (pd/3f)  (D) (1/n) (pf/d

Last Answer : (B) (1/n) (pd/2f) 

State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) Minimum clearance between cable and water pipe line when running in parallel. (iii) If cable is laid through pipe what should be diameter of pipe. (iv) When more than one cable is to be laid in the same trench, what should be minimum spacing between two cables ?

Description : State the four methods of laying of cable. State precautions while laying of underground cable in the situation : (i) Minimum clearance between cable and water pipe line when running in parallel. (ii) ... is to be laid in the same trench, what should be minimum spacing between two cables ?  

Last Answer : (i) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr. (ii) Minimum clearance between cable and water pipe line when running in parallel:- 0.5 mtr ... should be minimum spacing between two cables :- Then minimum 30 cm spacing is provided between 2 cables 

The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Description : The principle of conservation of energy cannot be applied in case of a.Flow of heat through a metal b.Ideal flow of water in a pipe c.Simple pendulum d.Sliding of a particle along inclined plane with friction e.A particle moving in gravitational field

Last Answer : e. A particle moving in gravitational field

The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Description : The principle of conservation of energy cannot be applied in case of a.Flow of water in a pipe b.A particle moving in gravitational field c.Frictional movement of a particle over a surface d.Frictionless movement of a principle over a surface e.Simple pendulum

Last Answer : c. Frictional movement of a particle over a surface

Explain Briefly The Uses Of Pipe Vice And Pipe Wrench ?

Description : Explain Briefly The Uses Of Pipe Vice And Pipe Wrench ?

Last Answer :  Pipe vice. It is used to hold the pipe firmly while cutting, threading etc.  Pipe wrench. It is used fir tightening and loosening the pipes.

What Are The Different Types Of Tools Used In Pipe Fittings?

Description : What Are The Different Types Of Tools Used In Pipe Fittings?

Last Answer : Generally tools used in pipe fittings are Pipe vice, Pipe wrench, Pipe die, Pipe tap, Chain wrench, Chisel, Hammer, Reamer and Pipe cutter.

Explain About Common Types Of Pipe Materials And How Are Pipes Specified?

Description : Explain About Common Types Of Pipe Materials And How Are Pipes Specified?

Last Answer : Pipes are commonly made of cast iron , steel, copper, lead, zinc, galvanized iron(G.I) wrought iron , aluminium and also cement and plastic pipes are used. Generally pipes are specified by the length, material, bore size.

What Is The Use Of Chain Wrench In Pipe Fitting?

Description : What Is The Use Of Chain Wrench In Pipe Fitting?

Last Answer : It is used to hold the pipe firmly and it is fit for rotation on both ways.

Name Different Pipe Fitting Accessories?

Description : Name Different Pipe Fitting Accessories?

Last Answer : Commonly used pipe fitting accessories are : Socket, Reducing socket, Cross, Union, Stop valve, Elbow, Union, Plug, Flange, Tee.

What Are Standard Pipe Threads?

Description : What Are Standard Pipe Threads?

Last Answer : Pipe threads are grouped in certain ranges such as 1/4” to 3/8” pipe threads have 19 T.P.I , ½ “ to 7/ 8” pipe threads have 14 T.P.I, 1” and above size pipe threads have 11 T.P.I . Pipe threads may be either straight or tapered.

Capillary wick is a part of a) heat pump b) heat wheel c) heat pipe d) regenerator

Description : Capillary wick is a part of a) heat pump b) heat wheel c) heat pipe d) regenerator

Last Answer : heat pipe

Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Description : Wet steam at 1 MPa flowing through a pipe is throttled to a pressure of 0.1 MPa. If the throttling temperature is110°C, What is the quality of the steam in the pipe?  a) 96%  b) 86%  c) 76%  d) 66%

Last Answer : 96%

A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Description : A steam calorimeter receives steam from a pipe at 0.1 MPa and 20°SH. For a pipe steam pressure of 2 MPa, what is the quality of the steam?  a) 95.56%  b) 70.10%  c) 95.20%  d) 85.10% Formula: h1 = hf1 + x1hfg1

Last Answer : 265.4°C, 430.7kJ/kg, 71.4kJ/kg, 1.0327kJ/(kg)(K),502.1 kJ/kg

Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe?  a. 34m/s  b. 24m/s  c. 15m/s  d. 27m/s

Description : Water flowing at a 6m/s through a 60 mm pipe is suddenly channeled into a 30 mm pipe. What is the velocity in the small pipe?  a. 34m/s  b. 24m/s  c. 15m/s  d. 27m/s

Last Answer : 24m/s

Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Description : Water is flowing through a 1 foot diameter pipe at the rate of 10ft/sec. What is the volume flow rate of water in ft³/sec?  a. 7.85  b. 6.85  c. 8.85  d. 5.85 V = Aν

Last Answer : 7.85

Full form of MJM is______ a.Multi Joint Modelling b.Multi Jet Modelling c.Muted Jet Modelling d.Mitred Jet Modelling

Description : Full form of MJM is______ a.Multi Joint Modelling b.Multi Jet Modelling c.Muted Jet Modelling d.Mitred Jet Modelling

Last Answer : b.Multi Jet Modelling

What Do You Meant By Expansion Joint?

Description : What Do You Meant By Expansion Joint?

Last Answer : This joint is used to carry the piping system at high pressure. This joint is provided with gland and stuffing box which make the joint perfectly steam tight. To prevent leakage asbestos packing is provided.

Explain About Spigot And Socket Joint?

Description : Explain About Spigot And Socket Joint?

Last Answer : This joint is generally used to connect cast iron pipes which are buried in ground .This is also suitable for straight pipe line carrying water and this joint has less rigidity.

Does the temperature of tap water affect fluoride's effectiveness in protecting teeth?

Description : Does the temperature of tap water affect fluoride's effectiveness in protecting teeth?

Last Answer : https://fluorideresearch.org/484/files/FJ2015_v48_n4_p338-344_sfs.pdf

Do you think Missouri is protecting womens health or being discriminatory?

Description : Do you think Missouri is protecting womens health or being discriminatory?

Last Answer : Without looking at the specific details, one has to ask, Why is Missouri different from every other state? Planned Parenthood has facilities everywhere else, but the rules in Missouri are apparently too draconian for them to operate even one facility.

Do the Conservatives believe in protecting the environment at all?

Description : Do the Conservatives believe in protecting the environment at all?

Last Answer : To judge by their rhetoric, and actions. Clearly they do not.

What's the maximum amount of money that the US president should be allowed to make out of the Secret Service for protecting him?

Description : What's the maximum amount of money that the US president should be allowed to make out of the Secret Service for protecting him?

Last Answer : 0

Should or could the USA be compensated for protecting the world?

Description : Should or could the USA be compensated for protecting the world?

Last Answer : The US already benefits hugely from its military power, and US intervention in the world is rarely-if ever-a purely altruistic endeavor. Leaving aside whatever deterrent effects having the world's most ... don't have the political willpower to do so regardless of whether or not they want to.

Can the sentence “One method to ....” be revised as “One method for protecting ....”?

Description : Can the sentence “One method to ....” be revised as “One method for protecting ....”?

Last Answer : answer:Sentence #1: One method to protect against the impact is to surround the structures with works built of fill materials. Sentence #2: One method for protecting against the impact is to surround the ... #2 leaves the works detail out. In engineering, this could be a very important detail.

Is Oscar Pistorius an innocent man, protecting his house against invisible invaders former lovers cheating girlfriends or is he OJ Simpson?

Description : Is Oscar Pistorius an innocent man, protecting his house against invisible invaders former lovers cheating girlfriends or is he OJ Simpson?

Last Answer : He holds a lot of records, including worst valentines present ever.

What is the best kind of professional to help me deal with issues about protecting my finances post divorce?

Description : What is the best kind of professional to help me deal with issues about protecting my finances post divorce?

Last Answer : A lawyer would probably be your best bet because they call tell you what you ex is and isn’t legally able to go after post divorce. Depending on your situation, there may be things that he is entitled to, so talk to a lawyer. Good luck.

How "creative" were your parents in teaching, disciplining and protecting you when you were a kid?

Description : How "creative" were your parents in teaching, disciplining and protecting you when you were a kid?

Last Answer : My father didn’t fool around.He was very direct. My mother put my panties on our Scottish Terrier when I didn’t pick them up. XD

When we protect our children from certain kinds of knowledge, are we protecting their psychological health, or are we protecting ourselves from dealing with uncomfortable subects?

Description : When we protect our children from certain kinds of knowledge, are we protecting their psychological health, or are we protecting ourselves from dealing with uncomfortable subects?

Last Answer : answer:One must go with the gut feel on this one. The TV has its ratings scheme but most parents by default know their kids best. Err on the safe side I guess. If a parent is uncertain about ... follow I guess. Just the ability to adapt to present situations in your kid's life and growth process.

Do SRO's (school resource officers) play a big part in protecting your child at school?

Description : Do SRO's (school resource officers) play a big part in protecting your child at school?

Last Answer : They play a big part at either protecting them or locking them up.

Why don't airplanes have a mesh protecting the engines?

Description : Why don't airplanes have a mesh protecting the engines?

Last Answer : As I understand it jet engines are designed to allow for things to get sucked in and blown out the back. I have heard that when jet engines are tested by having frozen turkeys thrown into them. Mesh would ... to have an intense fear of flying so I've done all sorts of reading on subjects like this.

Is telling a lie good if you are protecting afriend?

Description : Is telling a lie good if you are protecting afriend?

Last Answer : It can be good or it can be bad. DETAILS

Is lying bad if you are protecting someone?

Description : Is lying bad if you are protecting someone?

Last Answer : I don’t like to lie, but there are instances where it’s necessary. To protect someone is an excellent example.

Should we be protecting endangered species or should we just let natural selection take its course?

Description : Should we be protecting endangered species or should we just let natural selection take its course?

Last Answer : Oh… I like the controversy. I would say if WE have screwed up their environment, then save them. But if they are dying of other reasons, then let them go out. I completely believe that everything happens for a reason.

Where do you draw the line between protecting your children and allowing them to experience things?

Description : Where do you draw the line between protecting your children and allowing them to experience things?

Last Answer : What?

I need help protecting my Pencil Tree.

Description : I need help protecting my Pencil Tree.

Last Answer : Need Answer

What has been the contribution of the Indian Wildlife Protection Act in protecting habitats in India ? -SST 10th

Description : What has been the contribution of the Indian Wildlife Protection Act in protecting habitats in India ? -SST 10th

Last Answer : (i) An all-India list of protected species was published. The thrust of the programme was towards protecting the remaining population of certain endangered species by banning hunting, ... national parks, wildlife sanctuaries and bioreserves were established to protect and conserve the wildlife.