When a gas is expanded from high pressure region to low pressure
region; temperature change occurs". This phenomenon is related to the
(A) Gibbs-Duhem equation
(B) Gibbs-Helmholtz equation
(C) Third law of thermodynamics
(D) Joule-Thomson effect

1 Answer

Answer :

(D) Joule-Thomson effect

Related questions

Description : The relation connecting the fugacities of various components in a solution with one another and to composition at constant temperature and pressure is called the __________ equation. (A) Gibbs-Duhem (B) Van Laar (C) Gibbs-Helmholtz (D) Margules

Last Answer : (A) Gibbs-Duhem

Description : The four properties of a system viz. P, V, T, S are related by __________ equation. (A) Gibbs-Duhem (B) Gibbs-Helmholtz (C) Maxwell's (D) None of these

Last Answer : (C) Maxwell's

Description : Equation which relates pressure, volume and temperature of a gas is called the (A) Equation of state (B) Gibbs Duhem equation (C) Ideal gas equation (D) None of these

Last Answer : (A) Equation of state

Description : Gibbs-Duhem equation (A) States that n1dμ1 + n2dμ2 + ....njdμj = 0, for a system of definite composition at constant temperature and pressure (B) Applies only to binary systems (C) Finds no application in gas-liquid equilibria involved in distillation (D) None of these

Last Answer : (A) States that n1dμ1 + n2dμ2 + ....njdμj = 0, for a system of definite composition at constant temperature and pressure

Description : Variation of equilibrium pressure with temperature for any two phases of a given substances is given by the __________ equation. (A) Gibbs-Duhem (B) Maxwell's (C) Clapeyron (D) None of these

Last Answer : (C) Clapeyron

Description : Gibbs-Duhem equation relates composition in liquid phase and the __________ at constant temperature & pressure. (A) Fugacity (B) Partial pressure (C) Activity co-efficient (D) All (A), (B), and (C)

Last Answer : (D) All (A), (B), and (C)

Description : In thermodynamics, a throttling process, also called a _________, is a type of isenthalpic process where a liquid or gas is cooled as it passes from a higher pressure state to a lower pressure state.  a. Rankine Process  b. Carnot Cycle  c. Joule-Thomson process  d. Refrigeration process

Last Answer : Joule-Thomson process

Description : “The fugacity of a gas in a mixture is equal to the product of its mole fraction and its fugacity in the pure state at the total pressure of the mixture". This is (A) The statement as per Gibbs-Helmholtz (B) Called Lewis-Randall rule (C) Henry's law (D) None of these

Last Answer : (B) Called Lewis-Randall rule

Description : Gibbs-Helmholtz equation is (A) ∆F = ∆H + T [∂(∆F)/∂T]P (B) ΔF = ΔH - TΔT (C) d(E - TS) T, V < 0 (D) dP/dT = ∆Hvap/T.∆Vvap

Last Answer : (A) ∆F = ∆H + T [∂(∆F)/∂T]P

Description : Gibbs free energy (G) is represented by, G = H - TS, whereas Helmholtz free energy, (A) is given by, A = E - TS. Which of the following is the Gibbs Helmholtz equation? (A) [∂(G/T)/∂T] = - (H/T2) (B) [∂(A/T)/∂T]V = - E/T2 (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Description : Joule-Thomson co-efficient is the ratio of (A) Pressure change to temperature change occuring during adiabatic compression of a gas (B) Pressure change to temperature change occuring during adiabatic ... a gas (D) Temperature change to pressure change occuring during adiabatic throttling of a gas

Last Answer : (D) Temperature change to pressure change occuring during adiabatic throttling of a gas

Description : What is defined as the ratio of the change in temperature to the change in pressure when a real gas is throttled?  A. Rankine coefficient  B. Kelvin coefficient  C. Maxwell-Boltzmann coefficient  D. Joule-Thomson coefficient

Last Answer : Joule-Thomson coefficient

Description : The change in __________ is equal to the reversible work for compression in steady state flow process under isothermal condition. (A) Internal energy (B) Enthalpy (C) Gibbs free energy (D) Helmholtz free energy

Last Answer : (C) Gibbs free energy

Description : Throttling (Joule-Thomson effect) process is a constant __________ process. (A) Enthalpy (B) Entropy (C) Pressure (D) None of these

Last Answer : (A) Enthalpy

Description : Joule-Thomson effect i.e., a throttling process is a constant __________ process. (A) Entropy (B) Temperature (C) Internal energy (D) Enthalpy

Last Answer : (D) Enthalpy

Description : Claude process of gas liquefaction employs (A) Merely compression of gas beyond its critical pressure (B) Joule-Thomson expansion cooling (C) Heat exchange with colder stream (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (D) Adiabatic expansion against a piston or in a turbine

Description : Linde process of gas liquefaction employs (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Adiabatic expansion against a piston or in a turbine (D) Merely compressing the gas beyond its critical pressure

Last Answer : (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion)

Description : In any spontaneous process, the __________ free energy decreases. (A) Helmholtz (B) Gibbs (C) Both ‘a’ & ‘b’ (D) Neither 'a' nor 'b'

Last Answer : (C) Both ‘a’ & ‘b’

Description : Joule-Thomson co-efficient depends on the (A) Pressure (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Description : Which one is true for a throttling process? (A) A gas may have more than one inversion temperatures (B) The inversion temperature is different for different gases (C) The inversion ... gases (D) The inversion temperature is the temperature at which Joule-Thomson co-efficient is infinity

Last Answer : (B) The inversion temperature is different for different gases

Description : The principle applied in liquefaction of gases is (A) Adiabatic expansion (B) Joule-Thomson effect (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Description : The third law of thermodynamics states that the (A) Heat capacity of a crystalline solid is zero at absolute zero temperature (B) Heat transfer from low temperature to high temperature source is ... without external work (C) Gases having same reduced properties behaves similarly (D) None of these

Last Answer : (A) Heat capacity of a crystalline solid is zero at absolute zero temperature

Description : 6. Liquefaction of gases cannot be done by (A) Exchange of heat with colder stream (B) Adiabatic expansion through a throttle valve (Joule-Thomson expansion) (C) Merely compressing it beyond critical pressure (D) Adiabatic expansion against a piston or in a turbine

Last Answer : (C) Merely compressing it beyond critical pressure

Description : (1/V) (∂V/∂T)Pis the mathematical expression (A) Joule-Thomson co-efficient (B) Specific heat at constant pressure (Cp) (C) co-efficient of thermal expansion (D) Specific heat at constant volume (CV)

Last Answer : (C) co-efficient of thermal expansion

Description : Joule-Thomson co-efficient for a perfect gas is (A) Zero (B) Positive (C) Negative (D) None of these

Last Answer : (A) Zero

Description : What is the value of Joule-Thomson co-efficient for an ideal gas? (A) +ve (B) -ve (C) 0 (D) ∞

Last Answer : (C) 0

Description : Gases are cooled in Joule-Thomson expansion, when it is __________ inversion temperature. (A) Below (B) At (C) Above (D) Either 'b' or 'c'

Last Answer : A) Below

Description : Joule-Thomson co-efficient which is defined as, η = (∂T/∂P)H = 1/Cp (∂H/∂T)P, changes sign at a temperature known as inversion temperature. The value of Joule-Thomson co-efficient at inversion temperature is (A) 0 (B) ∞ (C) +ve (D) -ve

Last Answer : (A) 0

Description : During Joule-Thomson expansion of gases (A) Enthalpy remains constant (B) Entropy remains constant (C) Temperature remains constant (D) None of these

Last Answer : (A) Enthalpy remains constant

Description : In Joule-Thomson porous plug experiment, the (A) Enthalpy does not remain constant (B) Entire apparatus is exposed to surroundings (C) Temperature remains constant (D) None of these

Last Answer : (D) None of these

Description : In case of an ideal gas, Joule Thomson coefficient is -

Last Answer : In case of an ideal gas, Joule Thomson coefficient is - A. Zero B. Positive C. Negative D. Infinite

Description : The Joule. Thomson expansion of a gas is an

Last Answer : The Joule. Thomson expansion of a gas is an A. Isothermal process B. Isochoric process C. Isoenthalpic process D. Isobaric process

Description : Bernoulli's equation is dependent on the (A) First law of thermodynamics (B) Third law of thermodynamics (C) Law of conservation of momentum (D) None of these

Last Answer : (D) None of these

Description : The Joule-Thomson co-efficient is defined as (∂T/∂P)H. Its value at the inversion point is (A) ∞ (B) 1 (C) 0 (D) -ve

Last Answer : (C) 0

Description : Joule-Thomson experiment is (A) Isobaric (B) Adiabatic (C) Isenthalpic (D) Both (B) & (C)

Last Answer : (D) Both (B) & (C)

Description : Joule-Thomson Co-efficient at any point on the inversion curve is (A) ∞ (B) +ve (C) 0 (D) -ve

Last Answer : (C) 0

Description : Joule-Thomson co-efficient is defined as (A) µ = (∂P/∂T)H (B) µ = (∂T/∂P)H (C) µ = (∂E/∂T)H (D) µ = (∂E/∂P)H

Last Answer : (B) µ = (∂T/∂P)H

Description : If the heat of solution of an ideal gas in a liquid is negative, then its solubility at a given partial pressure varies with the temperature as (A) Solubility increases as temperature ... (D) Solubility increases or decreases with temperature depending on the Gibbs free energy change of solution

Last Answer : (B) Solubility increases as temperature decreases

Description : What predicts the approximate molar specific heat at high temperatures from the atomic weight?  A. Third law of thermodynamics  B. Law of Dulong and Petit  C. Mollier diagram  D. Pressure-enthalpy diagram

Last Answer : Law of Dulong and Petit

Description : __________ is concerned with the adsorption equilibria. (A) Fick's law (B) Gibb's equation (C) Freundlich equation (D) None of these

Last Answer : (C) Freundlich equation

Description : "At the absolute zero temperature, the entropy of every perfectly crystalline substance becomes zero". This follows from the (A) Third law of thermodynamics (B) Second law of thermodynamics (C) Nernst heat theorem (D) Maxwell's relations

Last Answer : (A) Third law of thermodynamics

Description : Third law of thermodynamics is helpful in (A) Prediction of the extent of a chemical reaction (B) Calculating absolute entropies of substances at different temperature (C) Evaluating entropy changes of chemical reaction (D) Both (B) and (C)

Last Answer : D) Both (B) and (C)

Description : What law states that it is impossible to build a device that operates in a cycle and produces no effect other than the transfer of heat from a lowertemperature body to a highertemperature body?  A. ... B. First law of thermodynamics  C. Second law of thermodynamics  D. Third law of thermodynamics

Last Answer : Second law of thermodynamics

Description : Refrigeration cycle (A) Violates second law of thermodynamics (B) Involves transfer of heat from low temperature to high temperature (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Involves transfer of heat from low temperature to high temperature

Description : The phenomenon of radioactivity was discovered by (A) Madam Curie (B) Becquerel (C) Roentgen (D) J.J. Thomson

Last Answer : (B) Becquerel

Description : As temperature goes to “0”, the entropy approaches a constant  a. Zeroth Law of Thermodynamics  b. First Law of Thermodynamics  c. Second Law of Thermodynamics  d. Third Law of Thermodynamics

Last Answer : Third Law of Thermodynamics

Description : Which law that states “Entropy of all perfect crystalline solids is zero at absolute zero temperature”?  a. Zeroth law of thermodynamics  b. First law of thermodynamics  c. Second law of thermodynamics  d. Third law of thermodynamics

Last Answer : Third law of thermodynamics

Description : What states that the entropy of a pure crystalline substance at absolute zero temperature is zero?  A. Zeroth law of thermodynamics  B. First law of thermodynamics  C. Second law of thermodynamics  D. Third law of thermodynamics

Last Answer : Third law of thermodynamics

Description : The basis for measuring thermodynamic property of temperature is given by  (a) zeroth law of thermodynamics  (b) first law of thermodynamics  (c) second law of thermodynamics  (d) third law of thermodynamics  (e) Avogadro’s hypothesis.

Last Answer : Answer : a

Description : Specific __________ does not change during phase change at constant temperature and pressure. (A) Entropy (B) Gibbs energy (C) Internal energy (D) Enthalpy

Last Answer : (B) Gibbs energy