Coagulant is used __________ filtration.
(A) Before
(B) After
(C) During
(D) To avoid

1 Answer

Answer :

(A) Before

Related questions

Description : Suspended solid present in the waste water generated in blast furnace gas cooling and cleaning plant is removed by (A) Biological oxygen pond (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate) (C) Lagoons (D) Filtration

Last Answer : (B) Radial settling tank (thickener) using coagulant (lime & ferrous sulphate)

Description : Temporary hardness of water can be removed by (A) Addition of alum (a coagulant) (B) Boiling (C) Filtration (through gravity sand filter) (D) Addition of lime

Last Answer : (B) Boiling

Description : Pick out the true statement pertaining to water treatment. (A) Slow sand filters can remove colour completely (B) Activated carbon can be used for taste & odour control without subsequent filtration ... of water (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Last Answer : (D) Normally, the turbidity is removed by adding a coagulant prior to sedimentation

Description : The amount of chemical coagulant added for treatment of polluted water __________ with increase in temperature of the polluted water to be treated. (A) Decreases (B) Increases (C) Remain constant (D) May increase or decrease; depends on the chemical characteristics of polluted water

Last Answer : (A) Decreases

Description : Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Last Answer : (A) Increase the porosity

Description : Filter medium resistance is important during the __________ of filtration. (A) Early stages (B) Final stages (C) Entire process (D) None of these

Last Answer : (A) Early stages

Description : During sewage treatment, the sewage is subjected to __________ treatment in Imhoff tank. (A) Filtration (B) Digestion (C) Sedimentation (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Description : During treatment of water, sedimentation is done  (A) Before filtration  (B) After filtration  (C) Simultaneously with filtration  (D) Along with chlorination 

Last Answer : (A) Before filtration 

Description : Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b

Last Answer : (C) Both ‘a’ & ‘b

Description : To remove dirt from the flowing fluid, we use a (A) Coagulant (B) Gravity settler (C) Strains (D) Clarifier

Last Answer : (C) Strains

Description : To remove very small amount of tiny solid impurities from liquid, we use a (A) Pressure filter (B) Vacuum filter (C) Centrifugal filter (D) Coagulant

Last Answer : (D) Coagulant

Description : Pick out the one which is not a chemical coagulant. (A) Aluminium sulphate (B) Ferrous sulphate (C) Hydrated lime (D) Chloramine

Last Answer : (D) Chloramine

Description : The most commonly used chemical coagulant in water treatment is (A) Ferrous sulphate (B) Alum (C) Lime (D) Hydrazine

Last Answer : (B) Alum

Description : Which is the most widely used coagulant for the treatment of turbid water? (A) Alum (aluminium sulphate) (B) Lime (C) Ferric chloride (D) Sodium aluminate

Last Answer : (A) Alum (aluminium sulphate)

Description : Which of the following is used as a coagulant in treating turbid water? (A) Chlorine (B) Ferric sulphate (C) Calcium sulphate (D) Activated carbon

Last Answer : (B) Ferric sulphate

Description : Most widely and commonly used coagulant for the removal of suspended impurities in water is (A) Bleaching powder (B) Slaked lime (C) Alum (D) Copper sulphate

Last Answer : (C) Alum

Description : The purpose of adding Na2CO3 to water of low alkalinity is to (A) Permit the use of alum as a coagulant (B) Increase the softening capacity of zeolite (C) Facilitate easy regeneration of zeolite (D) All (A), (B) and (C)

Last Answer : (A) Permit the use of alum as a coagulant

Description : Which of the following is used as a coagulant in water treatment? (A) Chloramine (B) Chlorine (C) Ferrous sulphate (D) Hydrogen peroxide

Last Answer : (C) Ferrous sulphate

Description : Alum [Al2 (SO4 )3 ] is used as a coagulant in water treatment to remove (A) Colour (B) Turbidity (C) Bacteria (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : The most widely used coagulant for removing suspended impurities from water is (A) Bleaching powder (B) Chlorine (C) Calcium sulphate (D) Alum

Last Answer : (D) Alum

Description : Use of hydrated lime in water treatment (A) Before filtration, reduces the bacterial load on filters (B) After filtration, combats the corrosiveness of water due to the presence of O2 & CO2 (C) Is to adjust the pH value (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Description : Filtration operation carried out by continuous increase of the inlet pressure of slurry, is called the __________ filtration. (A) Constant rate (B) Varying pressure (C) Varying rate (D) Constant pressure

Last Answer : (A) Constant rate

Description : A straight line is obtained on plotting reciprocal of filtration rate vs. the volume of filtrate for __________ flow of filtrate. (A) Compressible cakes and laminar (B) Incompressible cake and laminar (C) Compressible cake and turbulent (D) Incompressible cake and turbulent

Last Answer : (B) Incompressible cake and laminar

Description : Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Last Answer : (A) Open sand

Description : Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Last Answer : (B) 3 to 6

Description : Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500 (D) 4000 to 5000

Last Answer : (B) 100 to 200

Description : Ferrous sulphate is used in water treatment as a/an - (1) Oxidizing agent (2) Reducing agent (3) Coagulant aid (4) Adsorbent

Last Answer : (3) Coagulant aid

Description : Charcoal is used in water treatment as a/an - (1) absorbent (2) coagulant (3) solvent (4) adsorbent

Last Answer : (4) adsorbent Explanation: Charcoal is used in water treatment as adsorbent.

Description : Bleaching powder is used in drinking water as a/an – (1) disinfectant (2) antibiotic (3) antiseptic (4) coagulant

Last Answer : (1) disinfectant Explanation: Bleach refers to a number of chemicals which remove colour, whiten or disinfect, often via oxidation. Bleaches are used as household chemicals to whiten clothes and ... to control bacteria, viruses and algae and in any institution where sterile conditions are needed.

Description : Q No: 291 The coagulant widely used for sewage treatment, is A. Alum B. Ferric chloride C. Ferric sulphate D. Chlorinated copperas

Last Answer : ANS: B

Description : The normal values of over flow rates for sedimentation tanks using coagulant, ranges between A. 25,000 to 35,000 litres/sqm/day B. 40,000 to 50,000 litres/sqm/day C. 50,000 to 60,000 litres/sqm/day D. 80,000 to 100,000 litres/sqm/day

Last Answer : ANS: C

Description : The coagulant which is generally not used for treating the sewage, is A. Alum B. Ferric chloride C. Ferric sulphate D. Chlorinated copperas

Last Answer : ANS: A

Description : Which of the following is strongest coagulant

Last Answer : Aluminum Chloride (Alcl3)

Description : Alum is a (A) Coagulant (B) Flocculent (C) Catalyst (D) Disinfectant

Last Answer : (A) Coagulant

Description : Mostly used coagulant, is  (A) Chlorine  (B) Alum  (C) Lime  (D) Bleaching powder

Last Answer : (B) Alum

Description : Consider the following statements. The following factors relate to the process of coagulation : 1. Percentage removal is higher when turbidity is more 2. Additional of activated silica aids in the process of coagulation 3. pH of water ... 1, 2 and 3 b) 1 and 2 only c) 2 and 3 only d) 1 and 3 only

Last Answer : a) 1, 2 and 3

Description : Patient on anti-coagulant therapy requires an extraction to be performed. Which of the following is NOT true: A. Minor post operative bleedings can be reduced somehow by using tranexamic acid B. ... takes at least 8 hours for heparin to take effects D. Heparin should be administered sub-cutaneous

Last Answer : C. It takes at least 8 hours for heparin to take effects

Description : ____ is a soft cheeselike food made by curdling fresh hot soymilk with a coagulant. a. Tempeh c. Yogurt b. Tofu d. Cheddar

Last Answer : b. Tofu

Description : Which is the anti coagulant obtained from brown algae?

Last Answer : Ans: Sodium laminarin sulphateobtained from Laminaria is an effective blood anti coagulant.  

Description : Which is the anti-coagulant substance in blood? (1) Fibrinogen (2) Heparin (3) Thrombin (4) Globin

Last Answer : Heparin

Description : Ferrous sulphate is used in water treatment as a/an (1) Oxidizing agent (2) Reducing agent (3) Coagulant aid (4) Adsorbent

Last Answer : Coagulant aid

Description : Charcoal is used in water treatment as a/an (1) absorbent (2) coagulant (3) solvent (4) adsorbent

Last Answer : adsorbent

Description : Bleaching powder is used in drinking water as a/an (1) disinfectant (2) antibiotic (3) antiseptic (4) coagulant

Last Answer : disinfectant

Description : A centrifugal filtration unit operating at a rotational speed of w has inner surface of the liquid (density ρL) located at a radial distance R from the axis of rotation. The thickness of the liquid film is δ and no cake is formed. The ... . ρL (C) ½w 2 . δρL (2R + δ) (D) ½w 2 . R . ρL(R + 2δ)

Last Answer : (C) ½w 2 . δρL (2R + δ)

Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

Description : During washing of filter at the end of constant pressure filtration, the rate of washing equals the rate of filtration (A) At time zero (B) At the end of filtration

Last Answer : (B) At the end of filtration

Description : During filtration operation, the filtrate encounters the resistance of the (A) Filter medium (B) Cake (C) Channel carrying the slurry to the upstream side of the cake and filtrate away from the filter medium (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Description : High magnesia lime is added to hot sugar cane juice (during the manufacture of sugar) to (A) Flocculate the impurities (B) Facilitate fast filtration (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Description : Any ideas on how to avoid getting your credit hurt, before-during-after a care REPO?

Last Answer : Make the payments for him, and sell the car before it gets repossessed. And in future don’t co-sign loans for anyone you’re not willing to sacrifice your credit history and your savings for.