Filter medium resistance is important during the __________ of filtration. (A) Early stages (B) Final stages (C) Entire process (D) None of these

Filter medium resistance is important during the __________ of
filtration.
(A) Early stages
(B) Final stages
(C) Entire process
(D) None of these
by

1 Answer

Answer :

(A) Early stages
by

Related questions

Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre-coated on the filter medium prior to filtration (C) Separated from the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Description : Filter aids like asbestos, kieselguhr, diatomaceous earth etc. are used to increase the porosity of the final filter cake & reducing the cake resistance during filtration. Filter aid is (A) Added to the feed slurry (B) Pre ... the cake by dissolving solids or by burning it off (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

During filtration operation, the filtrate encounters the resistance of the (A) Filter medium (B) Cake (C) Channel carrying the slurry to the upstream side of the cake and filtrate away from the filter medium (D) All (A), (B) and (C)

Description : During filtration operation, the filtrate encounters the resistance of the (A) Filter medium (B) Cake (C) Channel carrying the slurry to the upstream side of the cake and filtrate away from the filter medium (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

. In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Description : . In filtration, the use of 'filter aid' helps in (A) Reducing the filtration pressure (B) Accelerating the rate of filtration (C) Deplugging the filter medium (D) Enhancing the cake porosity in case of a dense impermeable cake

Last Answer : (C) Deplugging the filter medium

Which of the following statement(s) is/are true concerning the physiology of the microvascular system? a. Filtration of capillary fluid into the interstitial and the subsequent reabsorption is influenced by Starling’s law of ultrafiltration b. The most important variable controlling blood to a capillary bed is the length of the vessel c. Most of the resistance to systemic blood flow occurs at the arteriolar level d. Adrenergic vasoconstriction can arrest blood flow to an entire capillary bed

Description : Which of the following statement(s) is/are true concerning the physiology of the microvascular system? a. Filtration of capillary fluid into the interstitial and the subsequent reabsorption is ... the arteriolar level d. Adrenergic vasoconstriction can arrest blood flow to an entire capillary bed

Last Answer : Answer: a, c, d Exchange of material between the vascular space and the cell of various tissues via the interstitial space is essential for organ viability and occurs at the ... contractions are potent enough that blood flow to entire capillary beds can be arrested by adrenergic vasoconstriction

Enlist the different filter medium used for filtration.

Description : Enlist the different filter medium used for filtration.

Last Answer : i) Filter paper. ii) Cotton wool. iii) Glass wool. iv) Asbestos. v) Fine muslin. vii)FilterMembranefilter. viii)Sintered glass filter. 

Filtration rate through a filter cake is proportional to (where, S = filtering surface R = specific cake resistance μ = viscosity of the filtrate) (A) S (B) 1/R (C) 1/μ (D) All (A), (B) & (C)

Description : Filtration rate through a filter cake is proportional to (where, S = filtering surface R = specific cake resistance μ = viscosity of the filtrate) (A) S (B) 1/R (C) 1/μ (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

The controlling resistance in a rotary drum vacuum filter is the __________ resistance.(A) Piping (B) Cake (C) Filter medium (D) None of these

Description : The controlling resistance in a rotary drum vacuum filter is the __________ resistance. (A) Piping (B) Cake (C) Filter medium (D) None of these

Last Answer : (B) Cake

Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc ) is proportional to __________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance). (A) √μ (B) 1/√μ (C) 1/μ (D) 1/μ

Description : Filtrate flow rate in case of a rotary drum vacuum filter (in which Rm < < Rc ) is proportional to __________ and the cycle time (where, μ = filtrate viscosity Rm = filter medium resistance Rc = cake resistance). (A) √μ (B) 1/√μ (C) 1/μ (D) 1/μ

Last Answer : (B) 1/√μ

Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Description : Addition of filter aid to the slurry before filtration is done to __________ of the cake. (A) Increase the porosity (B) Increase the compressibility co-efficient (C) Decrease the porosity (D) Decrease the compressibility co-efficient

Last Answer : (A) Increase the porosity

Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Description : Filtration of water in a paper mill is done by a/an __________ filter. (A) Open sand (B) Plate and frame (C) Vacuum leaf (D) Sparkler

Last Answer : (A) Open sand

Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Description : Water filtration rate in a rapid sand filter ranges from __________ kilolitres/m2 /hr. (A) 0.1 to 1 (B) 3 to 6 (C) 10 to 15 (D) 15 to 20

Last Answer : (B) 3 to 6

Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500(D) 4000 to 5000

Description : Water filtration rate in a slow sand filter ranges from __________ litres/m2 /hr. (A) 10 to 20 (B) 100 to 200 (C) 1500 to 2500 (D) 4000 to 5000

Last Answer : (B) 100 to 200

During the washing of cake (A) All the resistances are constant (B) Filter medium resistance increases (C) Filter medium resistance decreases (D) Cake resistance decreases

Description : During the washing of cake (A) All the resistances are constant (B) Filter medium resistance increases (C) Filter medium resistance decreases (D) Cake resistance decreases

Last Answer : (A) All the resistances are constant

During washing of filter at the end of constant pressure filtration, the rate of washing equals the rate of filtration (A) At time zero (B) At the end of filtration

Description : During washing of filter at the end of constant pressure filtration, the rate of washing equals the rate of filtration (A) At time zero (B) At the end of filtration

Last Answer : (B) At the end of filtration

In a trickling filter A. Filtration process is used B. Biological action is used C. Neither A. nor B. D. Both A. and B.

Description : In a trickling filter A. Filtration process is used B. Biological action is used C. Neither A. nor B. D. Both A. and B.

Last Answer : ANS: B

Filter medium resistance is that offered by the(A) Filter cloth(B) Embedded particles in the septum(C) Filter cloth and the embedded particle collectively(D) None of these

Description : Filter medium resistance is that offered by the (A) Filter cloth (B) Embedded particles in the septum (C) Filter cloth and the embedded particle collectively (D) None of these

Last Answer : (C) Filter cloth and the embedded particle collectively

The unit of filter medium resistance is(A) cm-1(B) gm/cm-1(C) cm/gm-1(D) gm-1

Description : The unit of filter medium resistance is (A) cm-1 (B) gm/cm-1 (C) cm/gm-1 (D) gm-1

Last Answer : (A) cm-1

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

The entire process of a project may be considered to be made upon a number of sub- processes placed in different stages called the Work Breakdown Structure. (True/False)

Description : The entire process of a project may be considered to be made upon a number of sub- processes placed in different stages called the Work Breakdown Structure. (True/False)

Last Answer : Ans. True

With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases(B) Increases linearly(C) Decreases(D) Is not affected

Description : With increase in drum speed, in a rotary drum filter, the filtration rate (A) Increases (B) Increases linearly (C) Decreases (D) Is not affected

Last Answer : (A) Increases

Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Description : Filter aid is used to (A) Increase the rate of filtration (B) Decrease the pressure drop (C) Increase the porosity of the cake (D) Act as a support base for the septum

Last Answer : (C) Increase the porosity of the cake

Tank filter (e.g., Nutsche filter) is (A) A high pressure filter (B) A continuous filter (C) Used for small scale filtration work (D) A leaf filter

Description : Tank filter (e.g., Nutsche filter) is (A) A high pressure filter (B) A continuous filter (C) Used for small scale filtration work (D) A leaf filter

Last Answer : (C) Used for small scale filtration work

Filtration should be stopped in a filter press, if the (A) Cake becomes very dense (B) Liquor stops flowing out to the discharge (C) Filtration pressure rises suddenly (D) Both (B) & (C

Description : Filtration should be stopped in a filter press, if the (A) Cake becomes very dense (B) Liquor stops flowing out to the discharge (C) Filtration pressure rises suddenly (D) Both (B) & (C

Last Answer : (D) Both (B) & (C

Shell and leaf filter as compared to plate and frame filter (A) Entails less labor cost(B) Facilitates filtration under higher pressure(C) Provides more effective washing(D) All (A), (B) & (C)

Description : Shell and leaf filter as compared to plate and frame filter (A) Entails less labor cost (B) Facilitates filtration under higher pressure (C) Provides more effective washing (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Filtration capacity of a rotary drum vacuum filter depends upon the (A) Cake thickness (B) Characteristics of the feed slurry (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Temporary hardness of water can be removed by (A) Addition of alum (a coagulant) (B) Boiling (C) Filtration (through gravity sand filter) (D) Addition of lime

Description : Temporary hardness of water can be removed by (A) Addition of alum (a coagulant) (B) Boiling (C) Filtration (through gravity sand filter) (D) Addition of lime

Last Answer : (B) Boiling

Cake resistance is (A) Important in the beginning of filtration (B) Decreased with the time of filtration (C) Independent of pressure drop (D) None of these

Description : Cake resistance is (A) Important in the beginning of filtration (B) Decreased with the time of filtration (C) Independent of pressure drop (D) None of these

Last Answer : (D) None of these

ch of the following fertilisers is needed for promoting the development of leaves and stems during early stages of plant growth? (A) Nitrogenous fertiliser (B) Potassic fertiliser (C) Phosphatic fertiliser (D) None of these

Description : ch of the following fertilisers is needed for promoting the development of leaves and stems during early stages of plant growth? (A) Nitrogenous fertiliser (B) Potassic fertiliser (C) Phosphatic fertiliser (D) None of these

Last Answer : (A) Nitrogenous fertilise

Phosphatic fertilisers (A) Are useful during early stage of the plant growth (B) Accelerate fruit formation in later stages of growth (C) Lessen the effect of excessive nitrogen application (D) None of these

Description : Phosphatic fertilisers (A) Are useful during early stage of the plant growth (B) Accelerate fruit formation in later stages of growth (C) Lessen the effect of excessive nitrogen application (D) None of these

Last Answer : (B) Accelerate fruit formation in later stages of growth

The unit of filter medium resistance is________

Description : The unit of filter medium resistance is________

Last Answer : L^-1

Assertion :- Filtration of colloidal particles is not possible by filter paper. Reason :- Size of colloidal particle is less than filter paper pores.

Description : Assertion :- Filtration of colloidal particles is not possible by filter paper. Reason :- Size of colloidal particle is less than filter paper pores.

Last Answer : Assertion :- Filtration of colloidal particles is not possible by filter paper. Reason :- Size of ... D. If both Assertion & Reason are False.

Air filtration typically uses a filter. a. HEPA b. Membrane c. Sand d. Diatomaceous Earth

Description : Air filtration typically uses a filter. a. HEPA b. Membrane c. Sand d. Diatomaceous Earth

Last Answer : a. HEPA

The most suitable pore size for bacterial filtration in a membrane filter is ------- A 0.22 mm B 0.45 nm C 0.22 µm D 30 µm

Description : The most suitable pore size for bacterial filtration in a membrane filter is ------- A 0.22 mm B 0.45 nm C 0.22 µm D 30 µm

Last Answer : C 0.22 µm

Differentiate between filtration and clarification. Enlist various filter media used in Pharmacy.

Description : Differentiate between filtration and clarification. Enlist various filter media used in Pharmacy.

Last Answer : Sr. no. Filtration Clarification 1 It is process of removal of solids or suspended matter in a liquid or gas by passing through a porous medium in which solids are retained. ... wool iv) Asbestos v) Fine muslin vi) Filter cloth vii) Membrane filters viii) Sintered glass filters.

Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Description : Explain any four factors affecting filtration. Draw a well labelled diagram of leaf filter.

Last Answer : Factors which affect the rate of filtration are:   1. Pressure: The rate of filtration of liquid is directly proportional to the pressure difference between the filter medium and filter cake. Thus, the ... cake increases which decreases the rate of filtration.  Diagram of leaf filter :

What are the thyroid cancer symptoms during its early stages?

Description : What are the thyroid cancer symptoms during its early stages?

Last Answer : Symptoms of thyroid cancer are a lump in the neck, changes to the voice such as hoarseness, difficulty swallowing, pain in the neck and throat, and swollen lymph nodes.

What are the typical signs of pregnancy during its early stages?

Description : What are the typical signs of pregnancy during its early stages?

Last Answer : In a typical pregnancy, the signs you should watch out to see if you're pregnant or not is nausea and chronic vomiting because these are the basic signs females should watch out for.

Which model is used during early stages of the system design afterthe requirements have been established? a) An application-composition model b) A post-architecture model c) A reuse model d) An early design model

Description : Which model is used during early stages of the system  design afterthe requirements have been established? a) An application-composition model b) A post-architecture model c) A reuse model d) An early design model

Last Answer : d) An early design model

During sewage treatment, the sewage is subjected to __________ treatment in Imhoff tank. (A) Filtration (B) Digestion (C) Sedimentation (D) Both (B) and (C)

Description : During sewage treatment, the sewage is subjected to __________ treatment in Imhoff tank. (A) Filtration (B) Digestion (C) Sedimentation (D) Both (B) and (C)

Last Answer : (D) Both (B) and (C)

Coagulant is used __________ filtration. (A) Before (B) After (C) During (D) To avoid

Description : Coagulant is used __________ filtration. (A) Before (B) After (C) During (D) To avoid

Last Answer : (A) Before

The following is true for gentamicin: A. It is more active in acidic medium B. It has a wide margin of safety C. It is excreted unchanged, mainly by glomerular filtration D. It primarily inhibits gram positive bacteria

Description : The following is true for gentamicin: A. It is more active in acidic medium B. It has a wide margin of safety C. It is excreted unchanged, mainly by glomerular filtration D. It primarily inhibits gram positive bacteria

Last Answer : C. It is excreted unchanged, mainly by glomerular filtration

VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Description : VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Last Answer : (4) On all stages between production and sale Explanation: Value Added Tax (VAT) is imposed on the value added to each commodity by a firm during all stages of production and distribution. In ... introduced as an indirect value added tax (VAT) into the Indian taxation system from 1 April 2005.

Which of the following matters would an auditor most likely consider when establishing the scope of the audit?a. Audit areas where there is a higher risk of material misstatement. b. The expected audit coverage, including the number and locations of the entity's components to be included. c. The entity's timetable for reporting, such as at interim and final stages. d. The discussion with the entity's management concerning the expected communications on the status of audit work throughout the engagement and the expected deliverables resulting from the audit procedures.

Description : Which of the following matters would an auditor most likely consider when establishing the scope of the audit? a. Audit areas where there is a higher risk of material misstatement. ... status of audit work throughout the engagement and the expected deliverables resulting from the audit procedures.

Last Answer : The expected audit coverage, including the number and locations of the entity's components to be included.

“The enthalpy change for any chemical reaction is independent of the intermediate stages, provided the initial and final conditions are the same for each route.” This statement is known as:

Description : “The enthalpy change for any chemical reaction is independent of the intermediate stages, provided the initial and final conditions are the same for each route.” This statement is known as:  A. Dulong’s Law  B. Dalton’s Law  C. Hess’s Law  D. Petit Law

Last Answer : Hess’s Law

VAT is imposed A. Directly on Consumers B. On final Stage of production C. On all stages from Production to final sale D. None of the above

Description : VAT is imposed A. Directly on Consumers B. On final Stage of production C. On all stages from Production to final sale D. None of the above

Last Answer : B. On final Stage of production

VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Description : VAT is imposed: (1) Directly on Consumer (2) On first stage of production (3) On final stage of production (4) On all stages between production and sale

Last Answer : On all stages between production and sale 

In washing type plate and frame filter press, the ratio of washing rate to the final filtrate rate is (A) 4 (B) 1/4 (C) 1 (D) 1/2

Description : In washing type plate and frame filter press, the ratio of washing rate to the final filtrate rate is (A) 4 (B) 1/4 (C) 1 (D) 1/2

Last Answer : (B) 1/4

The filtration factor is decreased in (A) Glomerulonephritis (B) Early essential hypertension (C) Malignant phase of hypertension (D) Starvation

Description : The filtration factor is decreased in (A) Glomerulonephritis (B) Early essential hypertension (C) Malignant phase of hypertension (D) Starvation

Last Answer : Answer : A