What is the setting for most autoclaves?a. 121oC at 15 psi for 15-30 minutes b. 100oC at 10 psi for 10-20 minutes c. 110oC at 21 psi for 20-30 min d. 150oC at 20 psi for 10-15 minutes

What is the setting for most autoclaves?a. 121oC at 15 psi for 15-30 minutes
b. 100oC at 10 psi for 10-20 minutes
c. 110oC at 21 psi for 20-30 min
d. 150oC at 20 psi for 10-15 minutes
by

1 Answer

Answer :

a. 121oC at 15 psi for 15-30 minutes
by

Related questions

An autoclave normally sterilizes material by heating the material to_____°C for minute‘s at__________ psi. a. 100; 10 30 b. 121.5; 15; 15 c. 100; 15; 0 d. 110; 30; 5

Description : An autoclave normally sterilizes material by heating the material to_____°C for minute‘s at__________ psi. a. 100; 10 30 b. 121.5; 15; 15 c. 100; 15; 0 d. 110; 30; 5

Last Answer : b. 121.5; 15; 15

What is the recommended time and pressure for sterilization of media using an Autoclave A 15 min 10 lbs B 60 min 5 lbs C 15 min 15 lbs D 15 min 20 lbs

Description : What is the recommended time and pressure for sterilization of media using an Autoclave A 15 min 10 lbs B 60 min 5 lbs C 15 min 15 lbs D 15 min 20 lbs

Last Answer : C 15 min 15 lbs

Temperature and duration in Flash method of Pasteurization is A 62.9℃, 30 min B 71.6℃, 30 min C 71.6℃, 15 seconds D 62.9℃, 15 seconds

Description : Temperature and duration in Flash method of Pasteurization is A 62.9℃, 30 min B 71.6℃, 30 min C 71.6℃, 15 seconds D 62.9℃, 15 seconds

Last Answer : C 71.6℃, 15 seconds

Three pumps, M, N and O are opened to fill a tank such that M and N can fill the tank alone in 18 min. and 23 min. respectively and O can empty it in 15 min. After 3 minutes the emptying pipe is closed. In how many minutes the tank will be full in this way? A) 20 B) 25 C) 18 D) 12

Description : Three pumps, M, N and O are opened to fill a tank such that M and N can fill the tank alone in 18 min. and 23 min. respectively and O can empty it in 15 min. After 3 minutes the emptying pipe is closed. In how many minutes the tank will be full in this way? A) 20 B) 25 C) 18 D) 12

Last Answer : D Let the tank full in x minutes, then M and N opened for x minutes and O for 3 minutes. (1/18 + 1/23)*x – (1/15)*3 = 1 (23+18/414)X=1+1/5 Solve, x = 12

Two pumps M and N can separately fill a dumper in 36 minutes and 45 minutes respectively. Both the pumps are opened together but 12 minutes after the start the pump M is turned off. How much time will it take to fill the dumper? A) 9 min B) 10 min C) 30 min D) 32 min

Description : Two pumps M and N can separately fill a dumper in 36 minutes and 45 minutes respectively. Both the pumps are opened together but 12 minutes after the start the pump M is turned off. How much time will it take to fill the dumper? A) 9 min B) 10 min C) 30 min D) 32 min

Last Answer : C 12/36 + x/45 = 1 (12*5)/180+4x/180=1 60+4x=180 4x=120 X=120/4=30min

Excluding stoppages, the speed of a bus is 54 kmph and including stoppages, it is 45 kmph. For how many minutes does the bus stop per hour? A.10 min B.12 min C.18 min D.15 min E.None of these

Description : Excluding stoppages, the speed of a bus is 54 kmph and including stoppages, it is 45 kmph. For how many minutes does the bus stop per hour? A.10 min B.12 min C.18 min D.15 min E.None of these

Last Answer : Answer – A (10 min) Explanation – Due to stoppages, it covers 9 km less.Time taken to cover 9 km = (9/54 x 60) min = 10 min

If the 'E/P converter' shown in the illustration operated on a range of 1-9 volts and 6-30 PSI, a 5 volt input would yield ______________. EL-0096 A. 9 PSI B. 15 PSI C. 18 PSI D. 24 PSI

Description : If the 'E/P converter' shown in the illustration operated on a range of 1-9 volts and 6-30 PSI, a 5 volt input would yield ______________. EL-0096 A. 9 PSI B. 15 PSI C. 18 PSI D. 24 PSI

Last Answer : Answer: C

An open-circuit fault between the pressure switch and the 'annunciator module' shown in the illustration would cause the alarm circuit to react in the same manner as if ___________. EL-0094 A. 3.5 volts were applied to the 'setpoint module' B. 'reduction gear lube oil pressure' fell below switch setting C. 50 PSI were applied to the 'setpoint module' D. the pressure switch closed

Description : An open-circuit fault between the pressure switch and the 'annunciator module' shown in the illustration would cause the alarm circuit to react in the same manner as if ___________. EL-0094 A. 3.5 ... below switch setting C. 50 PSI were applied to the 'setpoint module' D. the pressure switch closed

Last Answer : Answer: B

After flying for 16 minutes at 100kt TAS with a 20kt tail wind, you have to return to the airfield of departure. You will arrive after: a. 10 min 40 sec b. 20 min c. 24 min d. 16 min

Description : After flying for 16 minutes at 100kt TAS with a 20kt tail wind, you have to return to the airfield of departure. You will arrive after: a. 10 min 40 sec b. 20 min c. 24 min d. 16 min

Last Answer : c. 24 min

After flying for 16 minutes at 100kt TAS with a 20kt tail wind, you have to return to the airfield of departure. You will arrive after: a. 10 min 40 sec b. 20 min c. 24 min d. 16 min

Description : After flying for 16 minutes at 100kt TAS with a 20kt tail wind, you have to return to the airfield of departure. You will arrive after: a. 10 min 40 sec b. 20 min c. 24 min d. 16 min

Last Answer : c. 24 min

Two faucet p and q can fill a tank in 10 minutes and 20 minutes.If both faucet are opened simultaneously , after how much time should q be closed so that the tank is full in 9 minutes ? A) 2 min B) 9 min C) 4 min D) 7min

Description : Two faucet p and q can fill a tank in 10 minutes and 20 minutes.If both faucet are opened simultaneously , after how much time should q be closed so that the tank is full in 9 minutes ? A) 2 min B) 9 min C) 4 min D) 7min

Last Answer : A p fill the tank in 1 minute (10×2 = 20) = 2 units q fill the tank in 1 minute (20×1 = 20) = 1units For 9 min(p) = 9×2 = 18 units Remaining = 20 – 18 = 2 units Time for q be closed so that the tank is full in 9 minutes = 2/1 = 2 min

Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is retained in ETC iii) heat loss due to conduction back to atmosphere from ETC is high iv) performance of evacuated tube is highly dependent upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Description : Which of the following statements regarding evacuated tube collectors (ETC) are true? i) ETC is used for high temperatures upto 150oC ii) because of use of vacuum between two concentric glass tube, higher amount of heat is ... upon the ambient temperature i & iii b) ii & iii c) i & iv d) i & ii

Last Answer : d) i & ii

What does a transmitter output start from 3-15 psi or (0.2 - 1 Kg/Cm2) or 4 - 20 ma. etc. ?

Description : What does a transmitter output start from 3-15 psi or (0.2 - 1 Kg/Cm2) or 4 - 20 ma. etc. ? 

Last Answer : The transmitter output stance from what is known as "live zero". This system has specific advantages : 1. The systems automatically alarms when the signal system becomes inoperative. ... transmitter operating, but transmitting a zero measurement and a failure, in the signal system. 

At 160°C, it takes about minutes to kilt bacterial spores in a hot-air oven. a. 30 b. 60 c. 90 d. 120

Description : At 160°C, it takes about minutes to kilt bacterial spores in a hot-air oven. a. 30 b. 60 c. 90 d. 120

Last Answer : d. 120

Find the greatest unit of time with which 5 hours 15 minutes and 8 hours 24 minutes can both be represented as integers. (a) 70 min. (b) 63 min. (c) 48 min. (d) 42 min.

Description : Find the greatest unit of time with which 5 hours 15 minutes and 8 hours 24 minutes can both be represented as integers. (a) 70 min. (b) 63 min. (c) 48 min. (d) 42 min.

Last Answer : 63 min. 

1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Description : 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50'. What number is missing? -Riddles

Last Answer : 22

In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 days and 8 kg to 10 kg (C) 105 days to 120 days and 18 kg to 21 kg (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Description : In India, which one of the following should be considered the right combination of the age in days and live body weight in kg for a lamb for its weaning ? (A) 20 days to 30 days and 6 kg to 7 kg (B) 45 days to 60 ... (D) 75 days to 90 days and 12 kg to 15 kg (E) 55 days to 70 days and 9 kg to 11 kg

Last Answer : (C) 105 days to 120 days and 18 kg to 21 kg

For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Description : For an ordinary Portland cement (A) Residual does not exceed 10% when sieved through IS Sieve No. 9 (B) Soundness varies from 5 to 10 mm (C) Initial setting time is not less than 30 minutes (D) Compressive stress after 7 days, is not less than 175 kg/cm2

Last Answer : (C) Initial setting time is not less than 30 minutes

As per IS specifications, the maximum final setting time for ordinary Portland cement should be (A) 30 minutes (B) 1 hour (C) 6 hours (D) 10 hour

Description : As per IS specifications, the maximum final setting time for ordinary Portland cement should be (A) 30 minutes (B) 1 hour (C) 6 hours (D) 10 hour

Last Answer : Answer: Option D

The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes

Description : The initial setting time for ordinary Portland cement as per IS specifications should not be less than (A) 10 minutes (B) 30 minutes (C) 60 minutes (D) 600 minutes

Last Answer : Answer: Option B

The drainage area of a town is 12 hectares. Its 40% area is hard pavement ( K = 0.85), the 40% area is unpaved streets (K = 0.20) and the remaining is wooded areas (K = 0.15). Assuming the time of concentration for the areas as 30 minutes and using the formula Ps = 900/(t + 60) the maximum run off is A. 0.10 cumec B. 0.12 cumec C. 0.15 cumec D. 0.20 cumec

Description : The drainage area of a town is 12 hectares. Its 40% area is hard pavement ( K = 0.85), the 40% area is unpaved streets (K = 0.20) and the remaining is wooded areas (K = 0.15). Assuming the time of concentration ... 60) the maximum run off is A. 0.10 cumec B. 0.12 cumec C. 0.15 cumec D. 0.20 cumec

Last Answer : ANS: C

The solution of radiator should be drained out when the engine has run for a) 10 to 15 minutes b) 15 to 20 minutes c) 20 to 25 minutes d) 25 to 30 minutes

Description : The solution of radiator should be drained out when the engine has run for a) 10 to 15 minutes b) 15 to 20 minutes c) 20 to 25 minutes d) 25 to 30 minutes

Last Answer : b) 15 to 20 minutes

The duration of contact of chlorine with water before it is served to the first consumer, should be at least (A) 10 to 15 minutes (B) 15 to 20 minutes (C) 20 to 30 minutes (D) 30 to 40 minutes

Description : The duration of contact of chlorine with water before it is served to the first consumer, should be  at least  (A) 10 to 15 minutes  (B) 15 to 20 minutes  (C) 20 to 30 minutes  (D) 30 to 40 minutes 

Last Answer : (C) 20 to 30 minutes 

A barrier has four inlets A, B, C and D. The barrier can be filled in 24 minutes through the first three inlets and it can be filled in 30 minutes through the second, the third and fourth inlet also it can be filled through the first and the fourth inlet in 40 minutes. How much time required to fill up the barrier by all the four inlets? A) 10 mins B) 15 mins C) 20 mins D) 25 mins E) None of the Above

Description : A barrier has four inlets A, B, C and D. The barrier can be filled in 24 minutes through the first three inlets and it can be filled in 30 minutes through the second, the third and fourth inlet also it can be ... all the four inlets? A) 10 mins B) 15 mins C) 20 mins D) 25 mins E) None of the Above

Last Answer : C (1/A + 1/B + 1/C) = 1/24 …(i) (1/B + 1/C + 1/D) = 1/30 …(ii) (1/A + 1/D) = 1/40…(iii) From eqn (i) and (ii) (1/A – 1/D) = 1/120…(iv) From eqn (iii) and (iv) A=60,D=120. Let the time taken to full the tank = s S(1/A + 1/B +1/C +1/D)= 1 S(1/24+1/120) = 1 S= 20 mins

Choose the set of pressure intensities that are equivalent. (A) 4.33 psi, 10 ft. of water, 8.83 inches of Hg (B) 4.33 psi, 10 ft. of water, 20.7 inches of Hg (C) 10 psi, 19.7 ft. of water, 23.3 inches of Hg (D) 10 psi, 19.7 ft. of water, 5.3 inches of Hg

Description : Choose the set of pressure intensities that are equivalent. (A) 4.33 psi, 10 ft. of water, 8.83 inches of Hg (B) 4.33 psi, 10 ft. of water, 20.7 inches of Hg (C) 10 psi, 19.7 ft. of water, 23.3 inches of Hg (D) 10 psi, 19.7 ft. of water, 5.3 inches of Hg

Last Answer : (A) 4.33 psi, 10 ft. of water, 8.83 inches of Hg

How much time a bacterium take for the complete duplication? a. 30 min. b. 10 min. c. 20 min. d. 25 min.

Description : How much time a bacterium take for the complete duplication? a. 30 min. b. 10 min. c. 20 min. d. 25 min.

Last Answer : Ans: C

During the first 10 minutes after injection of phage DNA, no phage can be recovered by disrupting the infected bacterium. This is termed as A- eclipse period B- rise period C- latent period D- burst size

Description : During the first 10 minutes after injection of phage DNA, no phage can be recovered by disrupting the infected bacterium. This is termed as A- eclipse period B- rise period C- latent period D- burst size

Last Answer : eclipse period

.If a 1:600 dilution of a test compound kills a standard population of Staphylococcus aureus in 10minutes but not 5 minutes while a 1:60 dilution of phenol kills the population in thesame time, what is the phenol coefficient of the test compound? A- 1 B- 5 C- .10 D- .50

Description : .If a 1:600 dilution of a test compound kills a standard population of Staphylococcus aureus in 10minutes but not 5 minutes while a 1:60 dilution of phenol kills the population in thesame time, what is the phenol coefficient of the test compound? A- 1 B- 5 C- .10 D- .50

Last Answer : .10

or the selection of endospore-forming bacteria, a mixed culture can be heated at A- 80°C for 10 minutes B- 70°C for 10 minutes C- 60°C for 10 minutes D- 90°C for 10 minutes

Description : or the selection of endospore-forming bacteria, a mixed culture can be heated at A- 80°C for 10 minutes B- 70°C for 10 minutes C- 60°C for 10 minutes D- 90°C for 10 minutes

Last Answer : 80°C for 10 minutes

The maximal renal tubular reabsorptive capacity for calcium (Tmca) in mg/min is about (A) 1.5 ± 0.1 (B) 4.99 ± 0.21 (C) 5.5 ± 1.2 (D) 10.2 ± 2.2

Description : The maximal renal tubular reabsorptive capacity for calcium (Tmca) in mg/min is about (A) 1.5 ± 0.1 (B) 4.99 ± 0.21 (C) 5.5 ± 1.2 (D) 10.2 ± 2.2

Last Answer : Answer : B

Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Description : Calculate natural frequency of damped vibration, if damping factor is 0.52 and natural frequency of the system is 30 rad/sec which consists of machine supported on springs and dashpots. A 21 rad/sec B 25.62 rad/sec C 20.22 Hz D 3.15 Hz

Last Answer : B 25.62 rad/sec

The average age of A and B is 20 years. If C were to replace A, the average would be 19 and id C were to replace B,the average would be 21 . The ages of A, B and C are (in years) (a) 22, 17,16 (b) 22, 18, 20 (c) 30, 18, 15 (d) 23, 17 ,15

Description : The average age of A and B is 20 years. If C were to replace A, the average would be 19 and id C were to replace B,the average would be 21 . The ages of A, B and C are (in years) (a) 22, 17,16 (b) 22, 18, 20 (c) 30, 18, 15 (d) 23, 17 ,15

Last Answer : 22, 18, 20 Hint : A + B = 2 x 20 C + B = 2 x 19 A + C = 2 x 21

How many Newtons per square meters are 30 psi?

Description : How many Newtons per square meters are 30 psi?

Last Answer : 1000 psi is 6.895 MPa (mega pascals) where a Pa is 1 Newton/m2;thos 30 psi = 30/1000 x 6895000 = 206,850 N/m2

The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Description : The initial setting time of hydraulic lime, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Last Answer : Answer: Option D

The initial setting time of lime-pozzolana, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Description : The initial setting time of lime-pozzolana, is (A) 30 minutes (B) 60 minutes (C) 90 minutes (D) 120 minutes

Last Answer : Answer: Option D

Initial setting time of cement for asbestos cement products should be not less than (A) 30 minutes (B) 50 minutes (C) 75 minutes (D) 90 minutes

Description : Initial setting time of cement for asbestos cement products should be not less than (A) 30 minutes (B) 50 minutes (C) 75 minutes (D) 90 minutes

Last Answer : Answer: Option D

According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Description : According to IS Code , the requirement of an ordinary Portland cement is (a) The residue does not exceed 10% when sieved through is sieve no .9 (b) Its initial setting time is not less than 30 minutes. (c) its expansion is not morethan 10mm for unaerated cement (d) All the above.

Last Answer : (d) All the above.

Three pipes, A, B, & C are attached to a tank. A & B can fill it in 20 & 30 minutes respectively while C can empty it in 15 minutes. If A, B & C are kept open successively for 1 minute each, how soon will the tank be filled?

Description : Three pipes, A, B, & C are attached to a tank. A & B can fill it in 20 & 30 minutes respectively while C can empty it in 15 minutes. If A, B & C are kept open successively for 1 minute each, how soon will the tank be filled?

Last Answer : Answer: 167 minutes.

What is the time of removal the tensor from the newly executed A T Weld? (i) 15 minutes after pouring. (ii) 20 minutes after pouring* (iii) 25 minutes after pouring. (iv) 30 minutes after pouring.

Description : What is the time of removal the tensor from the newly executed A T Weld? (i) 15 minutes after pouring. (ii) 20 minutes after pouring* (iii) 25 minutes after pouring. (iv) 30 minutes after pouring.

Last Answer : (ii) 20 minutes after pouring*

A bike starts with a speed of 60 km/hr at 8a.m. Due to the problem in engine it reduces its speed as 20 km/hr for every 1 hour. After 9 am, the time taken to covers 15 km is: a) 13 minutes and 20 seconds b) 15 minutes and 09 seconds c) 18 minutes and 15 seconds d) 22 minutes and 30 seconds

Description : A bike starts with a speed of 60 km/hr at 8a.m. Due to the problem in engine it reduces its speed as 20 km/hr for every 1 hour. After 9 am, the time taken to covers 15 km is: a) 13 minutes and 20 seconds b) 15 minutes and 09 seconds c) 18 minutes and 15 seconds d) 22 minutes and 30 seconds

Last Answer : 15 min

Ravi walks to and fro to a Gym. He spends 30 minutes in gym. If he walks at speed of 20 km an hour, he returns to home at 8.00 a.m. If he walks at 30 km an hour, he returns to home at 7.30 a.m. How fast must he walk in order to return at 7.15 hours? a) 40 km/hr b) 30 km/hr c) 60 km/hr d) 50 km/hr

Description : Ravi walks to and fro to a Gym. He spends 30 minutes in gym. If he walks at speed of 20 km an hour, he returns to home at 8.00 a.m. If he walks at 30 km an hour, he returns to home at 7.30 a.m. How fast must he walk in order to return at 7.15 hours? a) 40 km/hr b) 30 km/hr c) 60 km/hr d) 50 km/hr

Last Answer :  A As per the question, let D be the total distance and ‘t’ is the time taken. So we have: D=20t 20t =30(t-0.5) 20t=30t-15 10t=15 t=3/2 D= 30 km Now, for the condition given we have: 30=S(t-3/4) 30=S(3/2-3/4) 30=S((6-3)/4) 30=S(3/4) S=40 km/hr

Minutes of the annual general meeting must be prepared and signed by the chairman within– (A) 14 days of the meeting (B) 21 days of the meeting (C) 30 days of the meeting (D) 45 days of the meeting

Description : Minutes of the annual general meeting must be prepared and signed by the chairman within– (A) 14 days of the meeting (B) 21 days of the meeting (C) 30 days of the meeting (D) 45 days of the meeting

Last Answer : Answer: 30 days of the meeting

If a train runs at 40 km/hour, it reaches its destination late by 11 minutes. But if it runs at 50 km/hour, it is late by 5 minutes only. The correct time (in minutes) for the train to complete the journey is? a) 13 b) 15 c) 19 d) 21 e) None of these

Description : If a train runs at 40 km/hour, it reaches its destination late by 11 minutes. But if it runs at 50 km/hour, it is late by 5 minutes only. The correct time (in minutes) for the train to complete the journey is? a) 13 b) 15 c) 19 d) 21 e) None of these

Last Answer : If the distance be x km, then x/40-x/50=6/60 x/4-x/5=1 x=20 km. Required time = (20/40) hour – 11 minutes = (1/2×60-11) minutes = 19 minutes Answer: c)

A freshly cut tree and a wooden artifact have 30.4 and 15.2 conuts `g^(-1)` `"min"^(-1)` of `C^(14)` of half of 5700 years. The age of the artifact in

Description : A freshly cut tree and a wooden artifact have 30.4 and 15.2 conuts `g^(-1)` `"min"^(-1)` of `C^(14)` of half of 5700 years. The age of the artifact in

Last Answer : A freshly cut tree and a wooden artifact have 30.4 and 15.2 conuts `g^(-1)` `"min"^(-1)` of `C^( ... in years would be: A. 2850 B. 5700 C. 570 D. 6930

is it florida law that companys give two 15 min breaks and a 30 min lunch?

Description : is it florida law that companys give two 15 min breaks and a 30 min lunch?

Last Answer : It is the Fair Labor Standards Act, a federal law. Florida actually has no break laws whatsoever. Only a limited number of states have laws about breaks and even those laws can be very limited still.

For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min -1? Assume that all the other operating conditions are the same for CSTR and PFR. (A) 0.15(B) 0.30 (C) 0.60 (D) 0.90

Description : For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min ... conditions are the same for CSTR and PFR. (A) 0.15 (B) 0.30 (C) 0.60 (D) 0.90

Last Answer : (C) 0.60

A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time and distance to PSR is: a. 1hr 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Description : A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time ... 1hr 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Last Answer : d. 1hr 16 min, 616nm

A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time and distance to PSR is: a. 1hr 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Description : A flight is planned from L to M, distance 850 nm. Wind component out is 35 kt(TWC), TAS 450kt. Mean fuel flow out is 2500kg/hr, mean fuel flow inbound is 1900kg/hr and the fuel available is 6000kg. The time ... 30 min, 660nm b. 1hr 30 min, 616nm c. 1hr 15 min, 606nm d. 1hr 16 min, 616nm

Last Answer : d. 1hr 16 min, 616nm