Description : Nylon-6 is manufactured from (A) Caprolactam (B) Adipic acid and Hexamethylenediamine (C) Maleic anhydride and Hexamethylenediamine (D) Sebacic acid and Hexamethylenediamine
Last Answer : (A) Caprolactam
Description : Nylon-6 is manufactured from (A) Caprolactam (B) Hexamethylene diamine and adipic acid (C) Hexamethylene diamine and Maleic anhydride (D) Hexamethylene diamine and Sebacic acid
Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene
Last Answer : (A) Terylene
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelite
Last Answer : (B) Nylon-66
Description : Nylon-66 is a polyamide of (A) Hexamethylene diamine and adipic acid (B) Adipic acid and methyl amine (C) Vinyl chloride and formaldehyde (D) None of these
Last Answer : (A) Hexamethylene diamine and adipic acid
Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol
Last Answer : (A) Adipic acid and Hexamethylene diamine
Description : Which of the following is a polymer of Hexamethylene diamine and adipic acid? (A) Nylon-6 (B) Nylon-66 (C) Nylon-6, 10 (D) Epoxy resin
Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Hexamethylene diamine and the ring (B) Hexamethylene diamine and the adipic acid (C) Adipic acid and the ring (D) None of these
Last Answer : (B) Hexamethylene diamine and the adipic acid
Description : Adipic acid is an intermediate in the manufacture of (A) Perspex (B) Nylon-66 (C) Polystyrene (D) Bakelit
Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol
Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is – (1) Nylon 66 (2) Terylene (3) Tollen's (4) Bakelite
Last Answer : (1) Nylon 66 Explanation: Polymers are very high molecular mass substances each molecule of which consists of very large number of simple structural units joined together though covalent bonds ... the repeating structural unit is derived from two monomer units - hexamethylenediamine and adipic acid.
Description : The polymer obtained by the condensation of hexamethylene diamine and adipic acid is : (1) Nylon 66 (2) Terylene (3) Tollen’s (4) Bakelite
Last Answer : Nylon 66
Description : Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid
Last Answer : (4) Terephthalic acid Explanation: Terylene is a co-polymer of ethylene glycol and Terephthalic acid. Also known as Dacron, it is prepared by the condensation polymerization of ethylene glycerol and. ... in the presence of a catalyst consisting of a mixture of zinc acetate and antimony trioxide.
Description : Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid
Last Answer : Terephthalic acid
Description : Adipic acid reacts with hexamethylene diamine to form (a) Bakelite (b) Nylon-6,6 (c) Terylene (d) Nylon-6,8
Last Answer : Nylon-6,6
Description : Nylon-6,6 is obtained from : (a) Adipic acid and hexamethylene diamine (b) Tetrafluoroethylene (c) Vinyl cyanide (d) Vinylbenzene
Last Answer : Adipic acid and hexamethylene diamine
Description : In nylon-66, the first and second numbers (i.e., 6) respectively designate the number of carbon atoms present in the (A) Diamine and the ring (B) Dibasic acid and the ring (C) Diamine and the dibasic acid (D) None of these
Last Answer : (C) Diamine and the dibasic acid
Description : what is the monomer of nylon-6?
Last Answer : A. Caprolactum [NH2-(CH2)5-COOH].
Description : The polymer obtained from condensation polymerisation of sebacic acid and hexamethylenediamine is called:
Last Answer : The polymer obtained from condensation polymerisation of sebacic acid and hexamethylenediamine is called: A. ... nylon-6 C. nylon-610 D. dacron
Description : Amitryptyline is synthesized from the following starting material : (A) Phthalic anhydride (B) Terephthalic acid (C) Phthalamic acid (D) Phthalimide
Last Answer : (B) Terephthalic acid
Description : Which one of the following organic compound is used to remove stains of iron compounds? (1) Oxalic acid (2) Benzoic acid (3) Phthalic acid (4) Cinnamic acid
Last Answer : (1) Oxalic acid Explanation: Oxalic acid is a reducing agent and its conjugate base, known as oxalate is a chelating agent for metal cations. Oxalic acid's main applications include cleaning or ... agents is due to its forming a stable, water soluble salt with ferric iron, ferrioxalate ion.
Last Answer : Oxalic acid
Description : __________ is not a condensation polymer. (A) Teflon (B) Nylon-66 (C) Dacron (D) Polystyrene
Last Answer : (A) Teflon
Description : Nylon-66 compared to nylon-6 has (A) Lower melting point (B) More abrasion resistant properties (C) Higher hardness (D) All (A), (B) and (C)
Last Answer : (C) Higher hardness
Description : Polyhexamethylene adipamide is also known as (A) Bakelite (B) Nylon-66 (C) Epoxy resin (D) Silicone rubber
Description : Chain growth polymerisation is a process, in which the monomers are added in a chain fashion, and it requires an initiator to produce the free radical. An example of chain growth polymerisation products is (A) Nylon-66 (B) Teflon (C) Polyester (D) Bakelite
Last Answer : (B) Teflon
Description : Polycaprolactam is (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon
Last Answer : (A) Nylon-6
Description : __________ is a homopolymer. (A) Neoprene (B) Bakelite (C) Nylon-66 (D) Terylene
Last Answer : (A) Neoprene
Description : Polycaprolactam is also known as (A) Nylon-66 (B) Nylon-6 (C) Teflon (D) SBR
Last Answer : (B) Nylon-6
Description : Phenol formaldehyde is produced by condensation polymerisation. It is also known as (A) Teflon (B) Bakelite (C) Polyester (D) Nylon-66
Last Answer : (B) Bakelite
Description : Polycaprolactam is nothing but (A) Orlon (B) Nylon-66 (C) Nylon-6 (D) Saran
Last Answer : (C) Nylon-6
Description : The inter particle forces between linear chains in nylon-66 are __________ bonds. (A) Hydrogen (B) Covalent (C) Ionic (D) None of these
Last Answer : (A) Hydrogen
Description : __________ is a copolymer. (A) Nylon-66 (B) Polypropylene (C) PVC
Last Answer : (A) Nylon-66
Description : Bristles of tooth brushes are made of (A) Nylon-6 (B) Nylon-66 (C) Polystyrene (D) PVC
Description : Nylon-6 as compared to nylon 66 has lower (A) Abrasion resistance (B) Thermal stability (C) Adhesion to rubber (D) Hardness
Last Answer : (A) Abrasion resistance
Description : Nylon-6 as compared to nylon-66 is (A) Harder (B) More abrasion resistant (C) Having higher melting point (D) None of these
Last Answer : (D) None of these
Description : Which of the following has the weakest intermolecular forces? (A) Polyisoprene (B) Nylon-66 (C) Polystyrene (D) Bakelite
Last Answer : (A) Polyisoprene
Description : Polycaprolactam is commercially known as (A) Nylon-6 (B) Nylon-66 (C) Dacron (D) Rayon
Description : Nylon-66 is so named because the (A) Average degree of polymerisation of the polymer is 1966 (B) Number of carbon atoms between two nitrogen atoms are 6 (C) Number of nitrogen atoms between two carbon atoms are 6 (D) Polymer was first synthesised in 1966
Last Answer : (A) Average degree of polymerisation of the polymer is 1966
Description : P.T.F.E. (Poly tetra fluoro ethylene) is commercially known as (A) Bakelite (B) Neoprene (C) Teflon (D) Nylon-66
Last Answer : (C) Teflon
Description : Nylon-6 as compared to Nylon-66 is having higher (A) Hardness (B) Abrasion/resistance (C) Melting point (D) None of these
Description : Nylon-66 is obtained from:
Last Answer : Nylon-66 is obtained from: A. Hexamethylene diamine and adipic acid B. Phenol and formaldehyde C. ... and adipic acid D. Adipic acid and phthalic acid
Description : ______ fiber is used in making bulletproof vests. (1) Nylon-66 (2) Terylene (3) Kevlar (4) Lexan
Last Answer : (3) Kevlar Explanation: Kevlar, a para-aramid synthetic fiber, is used for making bullet proof vests protective inserts.
Description : Clasify the polymers as addition and condenstation polymers. Nylon 66, Buna-S, Polythene.
Last Answer : Ans: Nylon 66 condensation polymer. Buna-S and polythene—Addition polymer.
Description : Arrange in increasing order of inter molecular forces. Nylon 66, Buna-S and polyethene.
Last Answer : Ans: Nylon 66 > polyethene> Buna-S
Description : Arrange the following Polymers in increasing order of inter molecular forces. (a) Nylon 66, Buna-S and Polythene (b) Nylon 6, Neoprene and PVC
Last Answer : Ans: (a) Buna-S, Polythene and Nylon 66. (b) Neoprene, PVC and Nylon 6.
Description : Why are the numbers 6, 6 and 6 put in the name of Nylon 66 and Nylon 6?
Last Answer : Ans: Nylon 66 means that it is formed by two monomers each containing six carbon atoms. While in Nylon 6 means that it is formed by a monomer containing six carbon atoms.
Description : 38. Which of the following statements is false? (1) Both starch and cellulose are polymers of glucose (2) Artificial silk is derived from cellulose (3) Nylon-66 is an example of elastomer (4) The repeat unit in natural rubber is isoprene
Last Answer : Nylon-66 is an example of elastomer
Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these