It is not preferable to use superheated steam in evaporators, because of its very (A) High temperature (B) High pressure (C) Low film co-efficient (D) None of these

It is not preferable to use superheated steam in evaporators, because of
its very
(A) High temperature
(B) High pressure
(C) Low film co-efficient
(D) None of these
by

1 Answer

Answer :

(C) Low film co-efficient
by

Related questions

Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger, the shell pressure drop is maximum for orifice baffles (C) S.I. unit of fouling factor is Watt/m2 .°K (D) Longitudinal fins are used in extended surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Description : Pick out the wrong statement. (A) Superheated steam is preferably not used for process heating because of its low heat transfer film co-efficient (B) In a shell and tube heat exchanger ... surface heat exchangers, when the direction of fluid flow is parallel to the axis of the tube

Last Answer : (C) S.I. unit of fouling factor is Watt/m2 .°K

Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat exchanger, when the (A) Higher condensing film co-efficient is desired (B) Condensate is corrosive in nature (C) Lower pressure drop through the exchanger is desired (D) Temperature of the incoming vapor is very high Answer: Option B

Description : Condensing film co-efficient for steam on horizontal tubes ranges from 5000 to 15000 Kcal/hr.m2 .°C. Condensation of vapor is carried out inside the tube in a shell and tube heat ... drop through the exchanger is desired (D) Temperature of the incoming vapor is very high

Last Answer : (B) Supersaturated

Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Description : Brass tubes are used in the manufacture of tubes of evaporators used in sugar and salt industries, mainly because of its (A) High co-efficient of thermal expansion (B) Low thermal conductivity (C) High corrosion resistance (D) All (A), (B) and (C)

Last Answer : (C) High corrosion resistance

The film co-efficient is decreased due to the presence of non-condensing gases in the vapors. The film co-efficient of superheated vapor as compared to that of saturated vapor is (A) More (B) Less (C) Some (D) Either more or less; depends on the nature of vapor

Description : The film co-efficient is decreased due to the presence of non-condensing gases in the vapors. The film co-efficient of superheated vapor as compared to that of saturated vapor is (A) More (B) Less (C) Some (D) Either more or less; depends on the nature of vapor

Last Answer : (C) Some

Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger calculations (Δt) weighted is used in place of Δt, when it involves more than one sequence of heating or cooling i.e., desuperheating & condensation or condensation & sub-cooling (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted (D) In case of short tube vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Description : Pick out the wrong statement. (A) 'Solvates' are chemical compounds formed by solute with their solvents. When water is the solvent, then it is called a 'hydrate' (B) In heat exchanger ... vertical evaporators, area of central downtake is about 50 to 100% of the total tube cross-sectional area

Last Answer : (C) Heat transfer co-efficient during nucleate boiling is not influenced by the agitation imparted

Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a shell and tube heat exchanger (C) Steam jet ejector is used for vapor compression in a thermal recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Description : Pick out the wrong statement: (A) The capacity of an evaporator is reduced by the boiling point elevation (B) Corrosive liquid is normally passed through the tubes in a ... recompression evaporator (D) Heat sensitive materials should be concentrated in high pressure evaporators

Last Answer : (D) Heat sensitive materials should be concentrated in high pressure evaporators

. A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of all the effects is -less than that in a single effect evaporator system (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect (C) Boiling point elevation in a single effect system is much higher than that in any effect in a multi-effect system (D) Heat transfer co-efficient in a single effect is much lower than that in any effect in a multi-effect system

Description : . A dilute aqueous solution is to be concentrated in an evaporator system. High pressure steam is available. Multiple effect evaporator system is employed, because (A) Total heat transfer area of ... in a single effect is much lower than that in any effect in a multi-effect system

Last Answer : (B) Total amount of vapor produced per Kg of feed steam in a multiple effect system is much higher than in a single effect

Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Description : Coolant present in the primary circuit of a pressurised water reactor is high pressure (A) Sub cooled water (B) Saturated water (C) Superheated steam (D) Saturated steam

Last Answer : (B) Saturated wate

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1 (C) When a vertical plate is heated in infinite air environmental under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Description : Pick out the wrong statement. (A) In process heat exchangers, saturated steam is preferred over the superheated steam (B) The maximum is the emissive power of a surface at a temperature T1 ... under natural convection conditions, the velocity profile in air, normal to the plate, exhibits a maximum

Last Answer : (B) The maximum is the emissive power of a surface at a temperature T1 occurs at a wavelength of λ1 . If the surface temperature is halved, the maximum in the emissive power would occur at a wavelength of 0.5 λ1

The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping (C) Most concentrated liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Description : The advantage of backward feed multiple effect evaporators over forward feed units is that (A) Heat sensitive material can be handled (B) There is no additional cost of pumping ... liquid is at highest temperature (D) Equal heat transfer co-efficients exist in various effects

Last Answer : (C) Most concentrated liquid is at highest temperature

Sudden temperature fluctuation does not affect pyrex glass, because of its (A) Low co-efficient of expansion (B) High co-efficient of expansion (C) High melting point (D) Both (B) and (C)

Description : Sudden temperature fluctuation does not affect pyrex glass, because of its (A) Low co-efficient of expansion (B) High co-efficient of expansion (C) High melting point (D) Both (B) and (C)

Last Answer : (A) Low co-efficient of expansion

Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Description : Dry saturated steam can be converted into superheated steam by (A) Increasing its cross-sectional area of flow (B) Passing it through a pressure reducing valve (C) Forcing it downwards through a vertical tube (D) None of these

Last Answer : (B) Passing it through a pressure reducing valve

Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Description : Extremely large or small volumes of fluids are generally best routed through the shell side of a shell and tube heat exchanger, because of the (A) Less corrosion problems (B) Flexibility possible in the baffle arrangement (C) Low pressure drop (D) High heat transfer co-efficient

Last Answer : (B) Flexibility possible in the baffle arrangement

In a shell and tube heat exchanger, floating head is used for (A) Large temperature differentials (B) High heat transfer co-efficient (C) Low pressure drop (D) Less corrosion of tubes

Description : In a shell and tube heat exchanger, floating head is used for (A) Large temperature differentials (B) High heat transfer co-efficient (C) Low pressure drop (D) Less corrosion of tubes

Last Answer : (A) Large temperature differentials

Saturated steam at a pressure of 25 kg/cm2is throttled to attain 5 kg/cm2. Then the outcoming steam will be (A) Wet (B) Saturated (C) Superheated (D) None of these

Description : Saturated steam at a pressure of 25 kg/cm2is throttled to attain 5 kg/cm2. Then the outcoming steam will be (A) Wet (B) Saturated (C) Superheated (D) None of these

Last Answer : C) Superheated

For which of the following substances, the gas laws can be used with minimum error  (a) dry steam  (b) wet steam  (c) saturated steam  (d) superheated steam  (e) steam at atmospheric pressure.

Description : For which of the following substances, the gas laws can be used with minimum error  (a) dry steam  (b) wet steam  (c) saturated steam  (d) superheated steam  (e) steam at atmospheric pressure.

Last Answer : Answer : d

The separation of liquid droplets from the vapor is done by a/an __________, in the evaporators. (A) Steam ejector (B) Entrainment separator (C) Compressor (D) Vacuum pump

Description : The separation of liquid droplets from the vapor is done by a/an __________, in the evaporators. (A) Steam ejector (B) Entrainment separator (C) Compressor (D) Vacuum pump

Last Answer : (B) Entrainment separator

Multiple effect evaporators ar used to (A) Increase the steam economy & decrease the capacity (B) Increase the steam economy & the capacity (C) Decrease the steam economy & the capacity (D) Decrease the steam economy & increase the capacity

Description : Multiple effect evaporators ar used to (A) Increase the steam economy & decrease the capacity (B) Increase the steam economy & the capacity (C) Decrease the steam economy & the capacity (D) Decrease the steam economy & increase the capacity

Last Answer : (B) Increase the steam economy & the capacity

For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Description : For which of the following substances, the internal energy and enthalpy are the functions of temperature only  (a) any gas  (b) saturated steam  (c) water  (d) perfect gas  (e) superheated steam.

Last Answer : Answer : d

Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

Description : Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

Last Answer : Represent generation of steam on H-S diagram. Show constant dryness fraction lines, constant temperature lines, saturated line and superheated region on the same.

The temperature of boiling water in a steam engine may be high because - (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the lire is at very high temperature

Description : The temperature of boiling water in a steam engine may be high because - (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the lire is at very high temperature

Last Answer : (3) there is high pressure inside the boiler Explanation: In the boiler of a steam engine, there is a firebox where coal is shoveled into. The coal is kept burning at a very high temperature, and ... reservoir; the steam is then controlled by a slide valve to move into a cylinder to push the piston.

The temperature of boiling water in a steam engine may be high because : (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the fire is at very high temperature

Description : The temperature of boiling water in a steam engine may be high because : (1) there are dissolved substances in water (2) there is low pressure inside the boiler (3) there is high pressure inside the boiler (4) the fire is at very high temperature

Last Answer :  there is high pressure inside the boiler

Viscous & heat sensitive liquids are concentrated in __________ evaporators. (A) Open pan (B) Long tube (C) Agitated film (D) None of these

Description : Viscous & heat sensitive liquids are concentrated in __________ evaporators. (A) Open pan (B) Long tube (C) Agitated film (D) None of these

Last Answer : (C) Agitated film

Forced circulation evaporators are useful for the concentration of viscous, salting and scale forming liquors. Which of the following is a forced circulation evaporator? (A) Long vertical evaporator (B) Horizontal tube evaporator (C) Agitated film evaporator (D) Calandria vertical tube evaporator

Description : Forced circulation evaporators are useful for the concentration of viscous, salting and scale forming liquors. Which of the following is a forced circulation evaporator? (A) Long vertical evaporator (B) Horizontal tube evaporator (C) Agitated film evaporator (D) Calandria vertical tube evaporator

Last Answer : (C) Agitated film evaporator

The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient(B) Increasing the liquid film co-efficient(C) Increasing the total pressure(D) Decreasing the total pressure

Description : The overall mass transfer co-efficient for the absorption of SO2 in air with dilute NaOH solution can be increased substantially by (A) Increasing the gas film co-efficient (B) Increasing the liquid film co-efficient (C) Increasing the total pressure (D) Decreasing the total pressure

Last Answer : (A) Increasing the gas film co-efficient

Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Description : Increasing the liquor level in the evaporator results in the (A) Decreased capacity (B) Increase in liquor film co-efficient (C) Decreased effect of hydrostatic head (D) Increased true temperature drop

Last Answer : (A) Decreased capacity

The film co-efficient between condensing vapour and metal wall increases with (A) Increasing temperature of the vapour (B) Decreasing temperature of the vapour (C) Increasing viscosity of the film of condensate (D) Increasing temperature drop

Description : The film co-efficient between condensing vapour and metal wall increases with (A) Increasing temperature of the vapour (B) Decreasing temperature of the vapour (C) Increasing viscosity of the film of condensate (D) Increasing temperature drop

Last Answer : (A) Increasing temperature of the vapour

Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 kJ/kg. K) The exit condition of steam is (A) Superheated vapour (B) Partially condensed vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Description : Steam undergoes isentropic expansion in a turbine from 5000 kPa and 400°C (entropy = 6.65 kJ/kg K) to 150 kPa) (entropy of saturated liquid = 1.4336 kJ/kg. K, entropy of saturated vapour = 7.2234 ... vapour with quality of 0.9 (C) Saturated vapour (D) Partially condensed vapour with quality of 0.1

Last Answer : (A) Superheated vapour

Which of the following identities can be most easily used to verify steam table data for superheated steam? (A) (∂T/∂V)S = (∂p/∂S)V (B) (∂T/∂P)S = (∂V/∂S)P (C) (∂P/∂T)V = (∂S/∂V)T (D) (∂V/∂T)P = -(∂S/∂P)T

Description : Which of the following identities can be most easily used to verify steam table data for superheated steam? (A) (∂T/∂V)S = (∂p/∂S)V (B) (∂T/∂P)S = (∂V/∂S)P (C) (∂P/∂T)V = (∂S/∂V)T (D) (∂V/∂T)P = -(∂S/∂P)T

Last Answer : D) (∂V/∂T)P = -(∂S/∂P)T

Which of the following approaches the ideal gas behaviour most closely? (A) Wet steam (B) Saturated steam (C) Superheated steam (D) Saturated water

Description : Which of the following approaches the ideal gas behaviour most closely? (A) Wet steam (B) Saturated steam (C) Superheated steam (D) Saturated water

Last Answer : Option C

Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Description : Multipass heat exchangers are used (A) Because of simplicity of fabrication (B) For low heat load (C) To obtain higher heat transfer co-efficient and shorter tube (D) To reduce the pressure drop

Last Answer : (C) To obtain higher heat transfer co-efficient and shorter tube

Double pipe heat exchangers are preferably useful, when (A) High viscosity liquid is to be cooled (B) Requirement of heat transfer area is low (C) Overall heat transfer co-efficient is very high (D) A corrosive liquid is to be heated

Description : Double pipe heat exchangers are preferably useful, when (A) High viscosity liquid is to be cooled (B) Requirement of heat transfer area is low (C) Overall heat transfer co-efficient is very high (D) A corrosive liquid is to be heated

Last Answer : (B) Requirement of heat transfer area is low

A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co-efficient and fi° is the fugacity of the pure component i. the Ki value (Yi = Ki xi) is therefore, in general a function of (A) Temperature only (B) Temperature and pressure only (C) Temperature, pressure and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Description : A reasonably general expression for vapour-liquid phase equilibrium at low to moderate pressure is φi yi P = Yi xifi° where, Φ is a vapor fugacity component, Yiis the liquid activity co- ... and liquid composition xi only (D) Temperature, pressure, liquid composition xi and vapour composition yi

Last Answer : (C) Temperature, pressure and liquid composition xi only

The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has an elevation of boiling point (B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Description : The capacity of double-effect evaporator is less than half of the capacity of two single effects, each of which is operating over same terminal temperature difference, when the (A) Solution has ... B) Evaporators operate under vacuum (C) Evaporators operate at atmospheric pressure (D) None of these

Last Answer : (A) Solution has an elevation of boiling point

In a gas-liquid shell and tube heat exchanger, the(A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure gases are corrosive in nature (C) Gases to be heated/cooled is normally routed through the shell side, because the corrosion caused by the cooling water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Description : In a gas-liquid shell and tube heat exchanger, the (A) Presence of a non-condensable gas decreases the condensing film co￾efficient (B) Gases under high pressure are routed through the tube side, because high pressure ... water or steam condensate remain localised to the tubes (D) All 'a', 'b' & 'c'

Last Answer : (D) All 'a', 'b' & 'c'

In an extended surface heat exchanger, fluid having lower co-efficient (A) Flows through the tube (B) Flows outside the tubes (C) Can flow either inside or outside the tubes (D) Should not be used as it gives very high pressure drop

Description : In an extended surface heat exchanger, fluid having lower co-efficient (A) Flows through the tube (B) Flows outside the tubes (C) Can flow either inside or outside the tubes (D) Should not be used as it gives very high pressure drop

Last Answer : (B) Flows outside the tubes

Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if distilled directly at atmospheric pressure (C) Material cannot be distilled by indirect heating even under low pressure, because of the high boiling temperature (D) Material to be distilled is thermally unstable or has the tendency to react with other components associated with it, at the boiling temperature

Description : Steam distillation is not recommended to be used, if the (A) Azeotropic mixture is to be separated and the final product is miscible with water (B) Liquids decompose, if ... unstable or has the tendency to react with other components associated with it, at the boiling temperature

Last Answer : (A) Azeotropic mixture is to be separated and the final product is miscible with water

Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Description : Which of the following is an undesirable property of a manometricliquid? (A) Non-sticky & non-corrosive nature (B) High vapour pressure (C) Low viscosity & surface tension (D) Low co-efficient of thermal expansion

Last Answer : (B) High vapour pressure

An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Description : An ideal coolant for a nuclear reactor should (A) Be a good absorber of neutrons (B) Be capable of attaining high temperature, only when it is pressurised (C) Have high density, but low heat transfer co-efficient (D) Be free from radiation damage and non-corrosive

Last Answer : (D) Be free from radiation damage and non-corrosive

Low-temperature ____ evaporators are used for heat-sensitive foods. a. ultrafiltration c. vacuum b. osmosis d. drum

Description : Low-temperature ____ evaporators are used for heat-sensitive foods. a. ultrafiltration c. vacuum b. osmosis d. drum

Last Answer : c. vacuum

Whether superheated steam can be treated like ideal gas ?

Description : Whether superheated steam can be treated like ideal gas ?

Last Answer : Yes.

What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Description : What type of steam is generated by evaporator tube of Lamont boiler ? a. Saturated steam b. Unsaturated steam c. Superheated steam d. Flash steam

Last Answer : a. Saturated steam

Superheated vapour behaves  (a) exactly as gas  (b) as steam  (c) as ordinary vapour  (d) approximately as a gas  (e) as average of gas and vapour.

Description : Superheated vapour behaves  (a) exactly as gas  (b) as steam  (c) as ordinary vapour  (d) approximately as a gas  (e) as average of gas and vapour.

Last Answer : Answer : d

Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge stream is mixed with superheated steam at 400 0C, 1 atm and specific volume of 3.11 m 3 /kg. Calculate the amount of superheated steam at 300 0C produced and the volumetric flow rate of the 400 0C steam.

Description : Saturated steam at 1 atm is discharged from a turbine at 1200 kg/h. Superheated steam at 300 0C  and 1 atm is needed as a feed to a heat exchanger. To produce it, the turbine discharge ... amount of superheated steam at 300 0C produced and the volumetric flow rate of the  400 0C steam.

Last Answer : Solution 1. Mass balance of water 1200 + m1 = m2 ………………………………………… (1) …………………….1 mark 2. Energy balance (1200 kg/h)(2676 kJ/kg) + m1(3278 kJ/kg)

Steam is to be condensed in a shell and tube heat exchanger, 5 m long with a shell diameter of 1 m. Cooling water is to be used for removing the heat. Heat transfer co-efficient for the cooling water, whether on shell side or tube side is the same. The best arrangement is (A) Vertical heat exchanger with steam on tube side (B) Vertical heat exchanger with steam on shell side (C) Horizontal heat exchanger with steam on tube side (D) Horizontal heat exchanger with steam on shell side

Description : Steam is to be condensed in a shell and tube heat exchanger, 5 m long with a shell diameter of 1 m. Cooling water is to be used for removing the heat. Heat transfer co-efficient ... ) Horizontal heat exchanger with steam on tube side (D) Horizontal heat exchanger with steam on shell side

Last Answer : (B) Vertical heat exchanger with steam on shell side

Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Description : Steam side heat transfer co-efficient in an evaporator is in the range of __________ kcal/hr.m2°C. (A) 10-50 (B) 100-500 (C) 1000-1500 (D) 5000-15000

Last Answer : (D) 5000-15000

The maximum heat transfer co-efficient from steam heating will beattained when the steam is: (A) Supersaturated (B) Saturated (C) Wet (D) None of these

Description : The maximum heat transfer co-efficient from steam heating will beattained when the steam is: (A) Supersaturated (B) Saturated (C) Wet (D) None of these

Last Answer : (B) Saturated