Description : 1,2-Dichloroethane reacts with excess of NaNH2 to form (a) Vinyl chloride (b) Ethylene (c) Ethyl chloride (d) Acetylene
Last Answer : Acetylene
Description : The best way to prepare 1,2-Dibromoethane is to treat : (a) Ethylene with Br2 (b) Acetylene with excess of HBr (c) Ethylene with excess of HBr (d) 1,2-Dichloroethane with Br2
Last Answer : Ethylene with Br2
Description : Ethylene oxide reacts with HBr to give (a) 1-Bromoethanol (b) Ethyl bromide (c) 2-Bromoethanol (c) Ethylene glycol
Last Answer : 2-Bromoethanol
Description : Ethylene glycol reacts with dimethyl terephthalate to form (a) Nylon-6,6 (b) Teflon (c) Dacron (d) Orlon
Last Answer : Dacron
Description : Ethylene reacts with oxygen in the presence of silver catalyst at 300°C to form (a) Diethyl ether (b) Ethylene glycol (c) Ethyl alcohol (d) Ethylene oxide
Last Answer : Ethylene oxide
Description : The monomer of poly vinyl chloride (PVC) is (A) Chloroethane (B) Ethylene dichloride (C) Ethyl chloride (D) Chloroform
Last Answer : (A) Chloroethane
Description : Butyric acid reacts with PCl5 to give (a) Benzoyl chloride (b) 1-Chlorobutane (c) Butyryl chloride (d) 1-Chloropropane
Last Answer : Butyryl chloride
Description : (3) prevents freezing of petrol Explanation: Ethylene glycol (IUPAC name: ethane-1,2-diol) is an organic compound widely used as an automotive antifreeze and a precursor to polymers. In its pure form, it is ... A mixture of 60% ethylene glycol and 40% water freezes at -45 degree C (- 49 degree F).
Last Answer : Rust is - (1) A mixture of Fe₂O₃ and Fe(OH) ₂ (2) A mixture of FeO and Fe(OH)₂ (3) FeO only (4) A mixture of Fe₂O₃, 3H₂O and FeO
Description : Teryleneisa condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid
Last Answer : (4) Terephthalic acid Explanation: Terylene is a co-polymer of ethylene glycol and Terephthalic acid. Also known as Dacron, it is prepared by the condensation polymerization of ethylene glycerol and. ... in the presence of a catalyst consisting of a mixture of zinc acetate and antimony trioxide.
Description : The chemical used in enabalining biological materials is – (1) formaldehyde in water (2) formaldehyde in methanol (3) ethylene glycol (4) gaseous formaldehyde
Last Answer : (1) formaldehyde in water Explanation: Embalming fluids use formaldehyde as a preservative. Formaldehyde is the simplest aldehyde with the chemical formula HCHO. Formalin is a solution of formaldehyde ... based embalming fluids are much kinder to the environment than those used in previous years.
Description : Vulcanization is the process of cross-linking polymer chains in rubber using (a) Sulfur. (b) Formaldehye. (c) Benzoyl peroxide. (d) Ethylene glycol.
Last Answer : Sulfur.
Description : The monomers for Buna-S are 1,3-butadiene and (a) Ethylene glycol (b) Adipic acid (c) Styrene (d) Caprolactum
Last Answer : Styrene
Description : Bakelite is obtained from : (a) Phenol and formaldehyde (b) Adipic acid and hexamethylene diamine (c) Dimethyl terephthalate and ethylene glycol (d) Neoprene
Last Answer : Phenol and formaldehyde
Description : Oxidation of acetaldehyde with Na2Cr2O7/H+ gives (a) Ethylene glycol (b) Acetic acid (c) Ethanol (d) Acetone
Last Answer : Acetic acid
Description : Which of the following statements is false? (a) Diethyl ether has been used as a general anesthetic (b) Ethyl alcohol is present in all alcoholic beverages (c) Methyl alcohol is produced by fermentation of sugars (d) Ethylene glycol is a common antifreeze for automobiles
Last Answer : Methyl alcohol is produced by fermentation of sugars
Description : Which of the following compounds is least soluble in water? (a) Glycerol (b) Ethyl alcohol (c) Ethylene glycol (d) Ethyl chloride
Last Answer : Ethyl chloride
Description : Which of the following is used as an antifreeze? (a) Ethylene glycol (b) Glycerol (c) Diethyl ether (d) Picric acid
Last Answer : Ethylene glycol
Description : When ethylene glycol is heated with concentrated HNO3, it forms (a) Oxalic acid (b) Ethylene oxide (c) Dioxane (d) Diethylene glycol
Last Answer : Oxalic acid
Description : Ethylene glycol undergoes oxidation with hot acidic KMnO4 to form : (a) Formic acid (b) Formaldehyde (c) Acetic acid (d) Acetaldehyde
Last Answer : Formic acid
Description : Ethylene oxide undergoes acid-hydrolysis to form (a) Ethylene glycol (b) Formic acid (c) Ethyl alcohol (d) Acetic acid
Description : In cold countries ethylene glycol is added to water in car radiators. This helps to (a) Reduce the viscosity (b) Make water a better lubricant (c) Lower the freezing point (d) Lower the boiling poin
Last Answer : Lower the freezing point
Description : Chemically, fats are esters of long carbon-chain acids and which of the following: w) ethanol x) glycerol y) ethylene glycol z) sodium hydroxide
Last Answer : ANSWER: X -- GLYCEROL
Description : Terylene is a condensation polymer of ethylene glycol and which acid? (1) Benzoic Acid (2) Salicylic acid (3) Phthalic acid (4) Terephthalic acid
Last Answer : Terephthalic acid
Description : The chemical used in embalming biological materials is (1) formaldehyde in water (2) formaldehyde in methanol (3) ethylene glycol (4) gaseous formaldehyde
Last Answer : formaldehyde in water
Description : Gammexane is (a) Hexachloroethane (b) DDT (c) Hexachlorocyclohexane (d) TNT
Last Answer : Hexachlorocyclohexane
Description : Ethylene glycol when heated in the presence of an hydrous `ZnCl_(2)` yields
Last Answer : Ethylene glycol when heated in the presence of an hydrous `ZnCl_(2)` yields A. Ethanal B. Ethylene oxide C. Dioxane D. Diethylene glycol
Description : Which IMF is the strongest in Ethylene Glycol (HOCH2CH2OH)?
Last Answer : These are hydrogen bonds and dispersion forces.
Description : Ethylene glycol test?
Last Answer : DefinitionEthylene glycol is a colorless, odorless, sweet-tasting but poisonous type of alcohol found in many household products. People sometimes drink ethylene glycol mistakenly or on purpose as a substitute ... into an airtight vial or tube attached to the needle. The elastic band is removed f
Description : Ethylene glycol intoxication?
Last Answer : DefinitionEthylene glycol is a colorless, odorless, sweet-tasting chemical found in many household products, including antifreeze, deicing products, detergents, paints, and cosmetics. It is poisonous if ... (ethanol).SymptomsThe first symptom of ethylene glycol ingestion is similar to the feeling ca
Description : Vitamin required for metabolism of diols e.g. conversion of ethylene glycol to acetaldehyde is (A) Thiamin (B) Cobalamin (C) Pyridoxine (D) Folic acid
Last Answer : Answer : B
Description : The starting material used for the manufacture of caprolactam is (A) Ethyl benzene (B) Cyclohexane (C) Ethylene glycol (D) DMT
Last Answer : (B) Cyclohexane
Description : Nylon-66 is manufactured from (A) Adipic acid and Hexamethylene diamine (B) Caprolactam (C) Maleic anhydride and Hexamethylene diamine (D) Dimethyl terephthalate (DMT) and ethylene glycol
Last Answer : (A) Adipic acid and Hexamethylene diamine
Description : Dacron is a (A) Condensation polymerisation product of Hexamethylene diamine and adipic acid (B) Condensation polymerisation product of dimethyl terephthalate (DMT) and ethylene glycol (C) Thermosetting material (D) None of these
Last Answer : (D) None of these
Description : Plasticisers are high boiling liquids added to plastic polymers to impart toughness and flexibility at ordinary temperature. Which of the following is not a plasticiser? (A) Ethylene glycol (B) Stearic acid estors (C) Tricresyl phosphate (D) Esters of phthalic acid
Last Answer : (A) Ethylene glycol
Description : Reaction of dimethyl terephthalate (DMT) and ethylene glycol produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC
Last Answer : (B) Dacron
Description : Synthetic polymer produced by using terephthalic acid and ethylene glycol is (A) Terylene (B) Nylon-66 (C) PVC (D) Polystyrene
Last Answer : (A) Terylene
Description : A suspension of glass beads in ethylene glycol has a hindered settling velocity of 1.7 mm/s, while the terminal settling velocity of a single glass bead in ethylene glycol is 17 mm/s. If the Richardson-Zaki hindered settling index ... in the suspension is (A) 0.1 (B) 0.4 (C) 0.6 (D) None of these
Last Answer : (C) 0.6
Description : Reaction of ethylene glycol and dimethyl terephthalate (DMT) produces (A) Nylon-6 (B) Dacron (C) Polyester (D) PVC
Description : Nylon-66 is manufactured from (A) Hexamethylene diamine and adipic acid (B) Hexamethylene diamine and Maleic anhydride (C) Caprolactam (D) Dimethyl terephthalate and ethylene glycol
Last Answer : (A) Hexamethylene diamine and adipic acid
Description : Dacron is a (A) Condensation product of Hexamethylene diamine and adipic acid (B) Thermosetting material (C) Condensation product of dimethyl terephthalate and ethylene glycol (D) None of these
Description : Which of the following is commonly used as liquid absorbent? a. Silica gel b. Activated alumina c. Ethylene glycol d. None of these
Description : Which of the following is a specific inhibitor of the enzyme alcohol dehydrogenase and is useful in the treatment of methanol poisoning: A. Disulfiram B. Ethylene glycol C. Calcium leucovorin D. Fomepizole
Last Answer : D. Fomepizole
Description : Ethylene oxide reacts with ammonia to give (a) 1-Aminoethanol (b) Ethylamine (c) 2-Aminoethanol (d) Acetamide
Last Answer : 2-Aminoethanol
Description : Ethylene reacts with HI to give (a) Iodoethane (b) 2,2-Diiodoethane (c) 1,1-Diiodoethane (d) None of these
Last Answer : Iodoethane
Description : Which of the following compounds would be unaffected by boiling aqueous NaOH? (a) Chloroethane (b) Acetaldehyde (c) Chlorobenzene (d) Ethyl acetate
Last Answer : Chlorobenzene
Description : Phenol reacts with excess bromine water to give (a) o- plus p-Bromophenol (b) Bromobenzene (c) 2,4,6-Tribromophenol (d) m-Bromophenol
Last Answer : 2,4,6-Tribromophenol
Description : Ethyl alcohol reacts with concentrated H2SO4 at 140°C to form (a) Acetone (b) Ethylene (c) Diethyl ether (d) Acetic acid
Last Answer : Diethyl ether
Description : 1,2-Ethanediol reacts with anhydrous zinc chloride to form (a) Ethylene (b) Acetaldehyde (c) Acetylene (d) Ethyl chloride
Last Answer : Acetaldehyde
Description : Neoprene which is used for making shoe heels & belts is superior to natural rubber in its stability to aerial oxidation and resistance to oils & other solvents. The monomer used for making neoprene is (A) Chloroethane (B) Chloroprene (C) Isoprene (D) None of these
Last Answer : (B) Chloroprene
Description : Which of the following reaction mixtures will give an organic product which is ionic? (a) CH3CH2OH + PCl5 (b) CH3CH2OH + KBr + H2SO4 (c) CH3CH2OH + Na (d) CH3CH2OH + SOCl2
Last Answer : CH3CH2OH + Na