A second order reaction of the form A + B → C is called a pseudo-first order reaction, when (A) CA0 = CB0 (B) CA0 > CB0 (C) CB0 > CA0 (D) CB0 ≥ CB0

A second order reaction of the form A + B → C is called a pseudo-first
order reaction, when
(A) CA0 = CB0
(B) CA0 > CB0
(C) CB0 > CA0
(D) CB0 ≥ CB0
by

1 Answer

Answer :

(D) CB0 ≥ CB0
by

Related questions

Half life period of a chemical reaction is proportional to CA0 -1 , if the reaction is of __________ order. (A) First(B) Zero(C) Second(D) Third

Description : Half life period of a chemical reaction is proportional to CA0 -1 , if the reaction is of __________ order. (A) First (B) Zero (C) Second (D) Third

Last Answer : (C) Second

The grammar with production rules S → aSb |SS|λ generates language L given by: (A) L = {w∈{a, b}* | na(w) = nb(w) and na(v) ≥ nb(v) where v is any prefix of w} (B) L = {w∈{a, b}* | na(w) = nb(w) and na(v) ≤ nb(v) where v is any prefix of w} (C) L = {w∈{a, b}* | na(w) ≠ nb(w) and na(v) ≥ nb(v) where v is any prefix of w} (D) L = {w∈{a, b}* | na(w) ≠ nb(w) and na(v) ≤ nb(v) where v is any prefix of w}

Description : The grammar with production rules S → aSb |SS|λ generates language L given by: (A) L = {w∈{a, b}* | na(w) = nb(w) and na(v) ≥ nb(v) where v is any prefix of w} (B) L = {w∈{a, b}* | na(w) = nb(w) and na(v ... (D) L = {w∈{a, b}* | na(w) ≠ nb(w) and na(v) ≤ nb(v) where v is any prefix of w}

Last Answer : (A) L = {w∈{a, b}* | na(w) = nb(w) and na(v) ≥ nb(v) where v is any prefix of w} 

The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Description : The gas phase reaction 2A ⇌ B is carried out in an isothermal plug flow reactor. The feed consists of 80 mole % A and 20 mole % inerts. If the conversion of A at the reactor exit is 50%, then CA/CA0 at the outlet of the reactor is (A) 2/3 (B) 5/8 (C) 1/3 (D) 3/8

Last Answer : (B) 5/8

The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Description : The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Last Answer : (B) 75

. For an isothermal second order aqueous phase reaction, A → B, the ratio of the time required for 90% conversion to the time required for 45% conversion is: (A) 2 (B) 4 (C) 11 (D) 22

Description : . For an isothermal second order aqueous phase reaction, A → B, the ratio of the time required for 90% conversion to the time required for 45% conversion is: (A) 2 (B) 4 (C) 11 (D) 22

Last Answer : (C) 11

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2(D) 3

Description : The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0.5

. A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two reactors. (A) Both conversion as well as concentration are same (B) Conversion in both will be the same but concentrations will be different (C) Both the conversion as well as concentrations will be different (D) None of these

Description : . A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two ... be different (C) Both the conversion as well as concentrations will be different (D) None of these

Last Answer : (B) Conversion in both will be the same but concentrations will be different

The concentration of A in a first order reaction, A → B, decreases (A) Linearly with time (B) Exponentially with time (C) Very abruptly towards the end of the reaction (D) Logarithmically with time

Description : The concentration of A in a first order reaction, A → B, decreases (A) Linearly with time (B) Exponentially with time (C) Very abruptly towards the end of the reaction (D) Logarithmically with time

Last Answer : (B) Exponentially with time

A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the process is limited by (A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Description : A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the ... A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Last Answer : (A) Diffusion within the pellet

Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration of A (B) Transition state theory approaches the problem of calculating reaction rates by concentrating on the idea of activated complexes (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases (D) If the rate of an irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Description : Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration ... irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Last Answer : (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases

Half life period of a first order irreversible reaction A → B is (A) k/2 (B) ln k/2 (C) ln 2/k (D) ln 0.5/k

Description : Half life period of a first order irreversible reaction A → B is (A) k/2 (B) ln k/2 (C) ln 2/k (D) ln 0.5/k

Last Answer : (C) ln 2/k

For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min -1? Assume that all the other operating conditions are the same for CSTR and PFR. (A) 0.15(B) 0.30 (C) 0.60 (D) 0.90

Description : For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min ... conditions are the same for CSTR and PFR. (A) 0.15 (B) 0.30 (C) 0.60 (D) 0.90

Last Answer : (C) 0.60

For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a single CSTR for high yield (B) Tubular reactor is preferred over a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Description : For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a ... a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Last Answer : (C) Both (A) and (B)

The experimentally determined overall order of the reaction, A + B → C + D, is two. Then the (A) Reaction is elementary with a molecularity of 2 (B) Molecularity of the reaction is 2, but the reaction may not be elementary (C) Reaction may be elementary with molecularity of 2 (D) Reaction is elementary but the molecularity may not be 2

Description : The experimentally determined overall order of the reaction, A + B → C + D, is two. Then the (A) Reaction is elementary with a molecularity of 2 (B) Molecularity of the reaction is 2, ... Reaction may be elementary with molecularity of 2 (D) Reaction is elementary but the molecularity may not be 2

Last Answer : (A) Reaction is elementary with a molecularity of 2

The dimensions of rate constant for reaction 3A → B are (l/gm mole)/min. Therefore the reaction order is (A) 0 (B) 1 (C) 2 (D) 3

Description : The dimensions of rate constant for reaction 3A → B are (l/gm mole)/min. Therefore the reaction order is (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (C) 2

The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Description : The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Last Answer : (A) 0

How do you Write a pseudo code algorithm that reads in three values and writes out the result of subtracting the second value from the sum of the first and third values?

Description : How do you Write a pseudo code algorithm that reads in three values and writes out the result of subtracting the second value from the sum of the first and third values?

Last Answer : Pseudocode means you don't use any actual computer language, so you can be quite informal. Just get the general idea. In this case, for instance:Input number to aInput number to bInput ... a + c - bShow resultYour teacher may have specific requirements for pseudocode; try to incorporate those.

What is the term used to describe a spread spectrum communications system where the center frequency if a conventional carrier is altered many time per second in accordance with a pseudo-random list of channels? A. Frequency hopping B. Direct sequence C. Time-domain frequency modulation D. Frequency compandored spread spectrum

Description : What is the term used to describe a spread spectrum communications system where the center frequency if a conventional carrier is altered many time per second in accordance with a pseudo ... hopping B. Direct sequence C. Time-domain frequency modulation D. Frequency compandored spread spectrum

Last Answer : A. Frequency hopping

What is a pseudo-molecular reaction ?

Description : What is a pseudo-molecular reaction ?

Last Answer : A reaction in which the number of solvent molecules, despite the participation of multiple reacting molecules, is high , is called a pseudo-molecular reaction.

A 75-year-old man had been receiving gentamicin (an aminoglycoside antibiotic) to treat an urinary tract infection. After three months of therapy patient's serum creatinine levels were 10 mg/dL ( normal 0.5-1.2) and serum gentamicin concentrations obtained just before the last dose were 9 mg/dL (normal < 2). Which of the following is the most likely adverse drug reaction the patient was suffering from? a) Type II allergic reaction b)Type III allergic reaction c) Pseudo allergic reaction d) Overdose toxicity

Description : A 75-year-old man had been receiving gentamicin (an aminoglycoside antibiotic) to treat an urinary tract infection. After three months of therapy patient's serum creatinine levels were 10 mg/ ... Type II allergic reaction b)Type III allergic reaction c) Pseudo allergic reaction d) Overdose toxicity

Last Answer : d) Overdose toxicity 

For the chemical reaction X → Y, it is observed that, on doubling the concentration of 'X', the reaction rate quadruples. If the reaction rate is proportional to Cx n , then what is the value of ‘n’? (A) 1/4 (B) 2 (C) 4 (D) 16

Description : For the chemical reaction X → Y, it is observed that, on doubling the concentration of 'X', the reaction rate quadruples. If the reaction rate is proportional to Cx n , then what is the value of ‘n’? (A) 1/4 (B) 2 (C) 4 (D) 16

Last Answer : (C) 4

For the chemical reaction P → Q, it is found that the rate of reaction doubles as the concentration of 'P' is doubled. If the reaction rate is proportional to Cp n , then what is the value of 'n' for this chemical reaction? (A) 0 (B) 1 (C) 2 (D) 3

Description : For the chemical reaction P → Q, it is found that the rate of reaction doubles as the concentration of 'P' is doubled. If the reaction rate is proportional to Cp n , then what is the value of 'n' for this chemical reaction? (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

The fractional volume change of the system for the isothermal gas phase reaction, A → 3B, between no conversion and complete conversion is (A) 0.5 (B) 1 (C) 2 (D) 3

Description : The fractional volume change of the system for the isothermal gas phase reaction, A → 3B, between no conversion and complete conversion is (A) 0.5 (B) 1 (C) 2 (D) 3

Last Answer : (C) 2

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

For the gaseous reaction 2A → B, where the feed consists of 50 mole % A and 50 mole % inerts, the expansion factor is (A) 1 (B) -0.5 (C) -0.25 (D) 0

Description : For the gaseous reaction 2A → B, where the feed consists of 50 mole % A and 50 mole % inerts, the expansion factor is (A) 1 (B) -0.5 (C) -0.25 (D) 0

Last Answer : (C) -0.25

With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Description : With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Last Answer : (A) Higher in P.F. reactor

The irreversible reaction, X → Y, is the special case of the reversible reaction, X ⇌ Y, in which the (A) Equilibrium constant is infinite (B) Fractional conversion of 'A' at equilibrium is unity (C) Concentration of 'A' at equilibrium is zero (D) All (A), (B) and (C)

Description : The irreversible reaction, X → Y, is the special case of the reversible reaction, X ⇌ Y, in which the (A) Equilibrium constant is infinite (B) Fractional conversion of 'A' at equilibrium is unity (C) Concentration of 'A' at equilibrium is zero (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The fractional volume change between no conversion and complete conversion, for the isothermal gas phase reaction, 2A → R, is (A) 0.5 (B) -0.5 (C) 1 (D) 1.5

Description : The fractional volume change between no conversion and complete conversion, for the isothermal gas phase reaction, 2A → R, is (A) 0.5 (B) -0.5 (C) 1 (D) 1.5

Last Answer : (B) -0.5

For a heterogeneous catalytic reaction, A + B → C, with equimole feed of A and B, the initial rate - rA0 is invariant with total pressure. The rate controlling step is (A) Surface Kc /(1 + TS ) reaction between absorbed A and B in the gas phase (B) Surface reaction between absorbed A and absorbed B (C) Surface reaction between A in the gas phase and absorbed B(D) Desorption of C

Description : For a heterogeneous catalytic reaction, A + B → C, with equimole feed of A and B, the initial rate - rA0 is invariant with total pressure. The rate controlling step is (A) Surface Kc /(1 + TS ) ... A and absorbed B (C) Surface reaction between A in the gas phase and absorbed B (D) Desorption of C

Last Answer : (D) Desorption of C

A chemical reaction, A → 3B, is conducted in a constant pressure vessel. Starting with pure A, the volume of the reaction mixture increases 3 times in 6 minutes. The fractional conversion is (A) 0.33 (B) 0.5 (C) 1 (D) Data insufficient, can't be predicted

Description : A chemical reaction, A → 3B, is conducted in a constant pressure vessel. Starting with pure A, the volume of the reaction mixture increases 3 times in 6 minutes. The fractional conversion is (A) 0.33 (B) 0.5 (C) 1 (D) Data insufficient, can't be predicted

Last Answer : (C) 1

To maximise the formation of R in the simultaneous reaction A + B → R, rR = 2CA 0.5 .CB 2 A + B→ S, rS = 1.5 CA. CB We should have (A) Low CA , low CB (B) Low CA , high CB (C) High CA , low CB (D) High CA , high CB

Description : To maximise the formation of R in the simultaneous reaction A + B → R, rR = 2CA 0.5 .CB 2 A + B→ S, rS = 1.5 CA. CB We should have (A) Low CA , low CB (B) Low CA , high CB (C) High CA , low CB (D) High CA , high CB

Last Answer : (B) Low CA , high CB

What is the value of 'n' if the reaction rate of the chemical reaction A → B, is proportional to CA n and it is found that the reaction rate triples, when the concentration of 'A' is increased 9 times? (A) 1/2 (B) 1/3 (C) 1/9 (D) 3

Description : What is the value of 'n' if the reaction rate of the chemical reaction A → B, is proportional to CA n and it is found that the reaction rate triples, when the concentration of 'A' is increased 9 times? (A) 1/2 (B) 1/3 (C) 1/9 (D) 3

Last Answer : (A) 1/2

Calcination reaction of limestone (CaCO3 → CaO + CO2 ) goes to completion in the rotary kiln, because (A) CaO is not dissociated (B) CO2 escapes continuously (C) Of high calcination temperature (D) CaO is more stable than CaCO3

Description : Calcination reaction of limestone (CaCO3 → CaO + CO2 ) goes to completion in the rotary kiln, because (A) CaO is not dissociated (B) CO2 escapes continuously (C) Of high calcination temperature (D) CaO is more stable than CaCO3

Last Answer : (B) CO2 escapes continuously

The rate of the chemical reaction A → B doubles as the concentration of A i.e.., CA is doubled. If rate of reaction is proportional to CA n , then what is the value of n for this reaction? (A) 0 (B) 0.5 (C) 1 (D) 2

Description : The rate of the chemical reaction A → B doubles as the concentration of A i.e.., CA is doubled. If rate of reaction is proportional to CA n , then what is the value of n for this reaction? (A) 0 (B) 0.5 (C) 1 (D) 2

Last Answer : (C) 1

Pure A in gas phase enters a reactor 50% of this A is converted to Bthrough the reaction, A → 3B. Mole fraction of A in the exit stream is(A) 1/2(B) 1/3(C) 1/4(D) 1/5

Description : Pure A in gas phase enters a reactor 50% of this A is converted to Bthrough the reaction, A → 3B. Mole fraction of A in the exit stream is (A) 1/2 (B) 1/3 (C) 1/4 (D) 1/5

Last Answer : (B) 1/3

Molecularity of an elementary reaction, P + Q → R + S is (A) 1 (B) 2 (C) 3 (D) 4

Description : Molecularity of an elementary reaction, P + Q → R + S is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (D) 4

The value of 'n' for a chemical reaction A → B, whose reaction rate is → CA n , will be __________ if the rate of the reaction increases by a factor of 8, when the concentration of is doubled. (A) 0 (B) 1 (C) 2 (D) 3

Description : The value of 'n' for a chemical reaction A → B, whose reaction rate is → CA n , will be __________ if the rate of the reaction increases by a factor of 8, when the concentration of is doubled. (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (D) 3

For reaction, P + 2 → 3R, molar rate of consumption of P is (A) Double of that of Q (B) Same as that of Q (C) Half of that of Q (D) 2/3rd of that of Q

Description : For reaction, P + 2 → 3R, molar rate of consumption of P is (A) Double of that of Q (B) Same as that of Q (C) Half of that of Q (D) 2/3rd of that of Q

Last Answer : (C) Half of that of Q

Entropy change of the reaction, H2O (liquid) → H2O (gas), is termed as the enthalpy of (A) Solution (B) Vaporisation (C) Formation (D) Sublimation

Description : Entropy change of the reaction, H2O (liquid) → H2O (gas), is termed as the enthalpy of (A) Solution (B) Vaporisation (C) Formation (D) Sublimation

Last Answer : (B) Vaporisation

Consider the reaction, C + O2 ⇌ CO2; ΔH = - 94 kcal. What will be the value of ΔH for the reaction CO2 → C + O2? (A) -94 kcal (B) +94 kcal (C) > 94 kcal (D) < -94 kcal

Description : Consider the reaction, C + O2 ⇌ CO2; ΔH = - 94 kcal. What will be the value of ΔH for the reaction CO2 → C + O2? (A) -94 kcal (B) +94 kcal (C) > 94 kcal (D) < -94 kcal

Last Answer : (B) +94 kcal

In the reaction, C + O2 → CO2; ΔH = - 94 kcal. What is the heat content (enthalpy) of O2? (A) -94 kcal (B) > -94 kcal (C) < - 94 kcal (D) Zero

Description : In the reaction, C + O2 → CO2; ΔH = - 94 kcal. What is the heat content (enthalpy) of O2? (A) -94 kcal (B) > -94 kcal (C) < - 94 kcal (D) Zero

Last Answer : (D) Zero

The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Description : The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Last Answer : (B) 2

Naphthenic acid is represented by (A) CnH2n+2O2 (B) CnH2n-2O2 (C) CnH2n+2O2 (n ≥ 6) (D) CnH2n+6O2 (n ≤ 6)

Description : Naphthenic acid is represented by (A) CnH2n+2O2 (B) CnH2n-2O2 (C) CnH2n+2O2 (n ≥ 6) (D) CnH2n+6O2 (n ≤ 6)

Last Answer : (B) CnH2n-2O2

Cetane number of high speed diesel must be ≥ (A) 30 (B) 45 (C) 75 (D) 95

Description : Cetane number of high speed diesel must be ≥ (A) 30 (B) 45 (C) 75 (D) 95

Last Answer : (B) 45

The general formula of naphthenes is(A) CnH2n + 2(B) CnH2n-6(where, n ≥ 6)(C) CnHn-4(D) Same as that for olefins i.e. CnH2n

Description : The general formula of naphthenes is (A) CnH2n + 2 (B) CnH2n-6 (where, n ≥ 6) (C) CnHn-4 (D) Same as that for olefins i.e. CnH2n

Last Answer : (B) CnH2n-6 (where, n ≥ 6)

. Which of the following relationships between co-efficient of friction (μ) between rock & roll and a (half of the angle of nip) of the particle to be crushed is correct? (A) μ > tan α (B) μ ≥ tan α (C) μ > tan 2α (D) μ ≤ tan α

Description : . Which of the following relationships between co-efficient of friction (μ) between rock & roll and a (half of the angle of nip) of the particle to be crushed is correct? (A) μ > tan α (B) μ ≥ tan α (C) μ > tan 2α (D) μ ≤ tan α

Last Answer : (B) μ ≥ tan α