The experimentally determined overall order of the reaction, A + B → C + D, is two. Then the (A) Reaction is elementary with a molecularity of 2 (B) Molecularity of the reaction is 2, but the reaction may not be elementary (C) Reaction may be elementary with molecularity of 2 (D) Reaction is elementary but the molecularity may not be 2

The experimentally determined overall order of the
reaction, A + B → C + D, is two. Then the
(A) Reaction is elementary with a molecularity of 2
(B) Molecularity of the reaction is 2, but the reaction may not be elementary
(C) Reaction may be elementary with molecularity of 2
(D) Reaction is elementary but the molecularity may not be 2
by

1 Answer

Answer :

(A) Reaction is elementary with a molecularity of 2
by

Related questions

Molecularity of an elementary reaction, P + Q → R + S is (A) 1 (B) 2 (C) 3 (D) 4

Description : Molecularity of an elementary reaction, P + Q → R + S is (A) 1 (B) 2 (C) 3 (D) 4

Last Answer : (D) 4

Molecularity of a reaction (A) Is always equal to the overall order of reaction (B) May not be equal to the order of reaction (C) Can’t have a fractional value (D) Both (B) and (C

Description : Molecularity of a reaction (A) Is always equal to the overall order of reaction (B) May not be equal to the order of reaction (C) Can’t have a fractional value (D) Both (B) and (C

Last Answer : (D) Both (B) and (C

Sum of the powers of the concentration terms in the rate equation is called the __________ of the reaction. (A) Order (B) Overall order (C) Molecularity (D) None of these

Description : Sum of the powers of the concentration terms in the rate equation is called the __________ of the reaction. (A) Order (B) Overall order (C) Molecularity (D) None of these

Last Answer : (B) Overall order

Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration of A (B) Transition state theory approaches the problem of calculating reaction rates by concentrating on the idea of activated complexes (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases (D) If the rate of an irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Description : Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration ... irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Last Answer : (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases

The order of a chemical reaction is (A) An experimentally determined quantity (B) Always equal to the total stoichiometric number of reactants (C) Never fractional (D) None of these

Description : The order of a chemical reaction is (A) An experimentally determined quantity (B) Always equal to the total stoichiometric number of reactants (C) Never fractional (D) None of these

Last Answer : (A) An experimentally determined quantity

The order of a chemical reaction (A) Can be determined only experimentally (B) Can be determined from the stoichiometry of the reaction (C) Cannot be zero (D) Can be fractional

Description : The order of a chemical reaction (A) Can be determined only experimentally (B) Can be determined from the stoichiometry of the reaction (C) Cannot be zero (D) Can be fractional

Last Answer : (B) Can be determined from the stoichiometry of the reaction (C) Cannot be zero

Pick out the wrong statement. (A) Visible radiation provides the necessary activation energy in photochemical reactions (B) The order and molecularity of a complex reaction may not be the same (C) For a second order reaction, the slope of the graph/plot between rate and (concentration) is equal to the rate constant (k) (D) Molecularity of the reaction is always a whole number greater than zero

Description : Pick out the wrong statement. (A) Visible radiation provides the necessary activation energy in photochemical reactions (B) The order and molecularity of a complex reaction may not be the same (C) For ... rate constant (k) (D) Molecularity of the reaction is always a whole number greater than zero

Last Answer : (B) The order and molecularity of a complex reaction may not be the same

Pick out the wrong statement. (A) In a multistep reaction, the slowest step is the rate determining step (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature (C) Slow chemical reactions have generally high values of activation energy (D) Molecularity of a reaction cannot be zero but the order of a reaction can be zero

Description : Pick out the wrong statement. (A) In a multistep reaction, the slowest step is the rate determining step (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature (C ... energy (D) Molecularity of a reaction cannot be zero but the order of a reaction can be zero

Last Answer : (B) In general, the rate of a reaction becomes triple for every 10°C rise in temperature

Which one of the following statements is not correct? A Since voltage depends on concentrations, using standard conditions makes it easier to compare different electrochemical reactions. B We have to measure the cell potential to obtain the difference in potential energy because the potential of half-reactions cannot be measured directly. C The direction of a redox reaction can only be determined experimentally. D Half-cell potentials for half-reactions are determined by combining the relevant half-cell with a standardised half-cell.

Description : Which one of the following statements is not correct? A Since voltage depends on concentrations, using standard conditions makes it easier to compare different electrochemical reactions. B We have ... half-reactions are determined by combining the relevant half-cell with a standardised half-cell.

Last Answer : C The direction of a redox reaction can only be determined experimentally. 

The molecularity and the order of reaction respectively, for the hydrolysis of methyl acetate in presence of acids are (A) 2 & 1 (B) 11 & 2 (C) 2 & 2 (D) 1 & 1

Description : The molecularity and the order of reaction respectively, for the hydrolysis of methyl acetate in presence of acids are (A) 2 & 1 (B) 11 & 2 (C) 2 & 2 (D) 1 & 1

Last Answer : (A) 2 & 1

Which of the following equations as suggested by Colebrook and White gives the increase in roughness of a new surface (ε0 ) with age/time (t) (where, ε = roughness of the surface after time't'. α = a co-efficient to be experimentally determined)? (A) ε = ε0 + α.t (B) ε = ε0 + α.t 2 (C) ε = ε0 + α.t 3 (D) ε = ε0 + α.t

Description : Which of the following equations as suggested by Colebrook and White gives the increase in roughness of a new surface (ε0 ) with age/time (t) (where, ε = roughness of the surface after time't'. α = a co-efficient to be experimentally determined ... ε = ε0 + α.t 2 (C) ε = ε0 + α.t 3 (D) ε = ε0 + α.t

Last Answer : (A) ε = ε0 + α.t

Information about the order of reaction is obtained from its (a) Reaction rate (b) Molecularity (c) Rate equation (d) Half-life period

Description : Information about the order of reaction is obtained from its (a) Reaction rate (b) Molecularity (c) Rate equation (d) Half-life period

Last Answer : Ans:(c)

When could order an molecularity of a reaction i) be Same ii) be different

Description : When could order an molecularity of a reaction i) be Same ii) be different

Last Answer : Ans.: i) Order and molecularity will be same in single step reaction. ii) They will be different if reaction is of two or more steps.

Differentiate between order of reaction and molecularity of reaction.

Description : Differentiate between order of reaction and molecularity of reaction.

Last Answer : Order of reaction  Molecularity 1. It is defined as sum of powers to which concentration terms are raised in rate law ... can be determined, 4. Molecularity of complex reaction can not be determined.

All chiral D-sugars rotate plane-polarized light : (a) clockwise (b) counterclockwise (c) +20.0° (d) in a direction that cannot be predicted but must be determined experimentally

Description : All chiral D-sugars rotate plane-polarized light : (a) clockwise (b) counterclockwise (c) +20.0° (d) in a direction that cannot be predicted but must be determined experimentally

Last Answer : in a direction that cannot be predicted but must be determined experimentally

What happens when a chemical bond is formed? (1) energy is always absorbed (2) energy in always released (3) more energy is released than is absorbed (4) energy is neither released nor absorbed Correct (4) Answer – (1) energy is always absorbed Explanation: If a bond is broken, energy is released; and if a bond is formed, energy must have been absorbed. As these occur, a change in the chemical energy of the system also occurs. Within each bond of a molecule is an experimentally determined amount of enemy that upon the breaking of that bond is released into the chemical system. The energy within these bonds are 'stored' and can be easily thought of as potential energy. Upon the breaking of these bonds the energy is released thereby creating usable energy.

Description : What happens when a chemical bond is formed? (1) energy is always absorbed (2) energy in always released (3) more energy is released than is absorbed (4) energy is neither released nor ... as potential energy. Upon the breaking of these bonds the energy is released thereby creating usable energy.

Last Answer : Silver nitrate solution is kept in brown bottles in laboratory because - (1) it reacts with ordinary white bottles (2) brown bottles stops the passage of light through it (3) brown bottles do not react with it (4) brown bottles react with it

The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Description : The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Last Answer : (A) 0

The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Description : The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Last Answer : (B) 75

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

. A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two reactors. (A) Both conversion as well as concentration are same (B) Conversion in both will be the same but concentrations will be different (C) Both the conversion as well as concentrations will be different (D) None of these

Description : . A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two ... be different (C) Both the conversion as well as concentrations will be different (D) None of these

Last Answer : (B) Conversion in both will be the same but concentrations will be different

The number of species participating in the slowest step of the reaction is called molecularity of the reaction.

Description : The number of species participating in the slowest step of the reaction is called molecularity of the reaction.

Last Answer : Define Equilibrium state

What is the overall state of Tacoma public elementary schools?

Description : What is the overall state of Tacoma public elementary schools?

Last Answer : I don’t know. But these folks would like to tell you: http://www.greatschools.net/washington/tacoma/ Browns Point seems to be well-liked.

For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min -1? Assume that all the other operating conditions are the same for CSTR and PFR. (A) 0.15(B) 0.30 (C) 0.60 (D) 0.90

Description : For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min ... conditions are the same for CSTR and PFR. (A) 0.15 (B) 0.30 (C) 0.60 (D) 0.90

Last Answer : (C) 0.60

For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a single CSTR for high yield (B) Tubular reactor is preferred over a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Description : For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a ... a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Last Answer : (C) Both (A) and (B)

. For an isothermal second order aqueous phase reaction, A → B, the ratio of the time required for 90% conversion to the time required for 45% conversion is: (A) 2 (B) 4 (C) 11 (D) 22

Description : . For an isothermal second order aqueous phase reaction, A → B, the ratio of the time required for 90% conversion to the time required for 45% conversion is: (A) 2 (B) 4 (C) 11 (D) 22

Last Answer : (C) 11

The dimensions of rate constant for reaction 3A → B are (l/gm mole)/min. Therefore the reaction order is (A) 0 (B) 1 (C) 2 (D) 3

Description : The dimensions of rate constant for reaction 3A → B are (l/gm mole)/min. Therefore the reaction order is (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (C) 2

The concentration of A in a first order reaction, A → B, decreases (A) Linearly with time (B) Exponentially with time (C) Very abruptly towards the end of the reaction (D) Logarithmically with time

Description : The concentration of A in a first order reaction, A → B, decreases (A) Linearly with time (B) Exponentially with time (C) Very abruptly towards the end of the reaction (D) Logarithmically with time

Last Answer : (B) Exponentially with time

A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the process is limited by (A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Description : A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the ... A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Last Answer : (A) Diffusion within the pellet

A second order reaction of the form A + B → C is called a pseudo-first order reaction, when (A) CA0 = CB0 (B) CA0 > CB0 (C) CB0 > CA0 (D) CB0 ≥ CB0

Description : A second order reaction of the form A + B → C is called a pseudo-first order reaction, when (A) CA0 = CB0 (B) CA0 > CB0 (C) CB0 > CA0 (D) CB0 ≥ CB0

Last Answer : (D) CB0 ≥ CB0

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

Half life period of a first order irreversible reaction A → B is (A) k/2 (B) ln k/2 (C) ln 2/k (D) ln 0.5/k

Description : Half life period of a first order irreversible reaction A → B is (A) k/2 (B) ln k/2 (C) ln 2/k (D) ln 0.5/k

Last Answer : (C) ln 2/k

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

For the chemical reaction X → Y, it is observed that, on doubling the concentration of 'X', the reaction rate quadruples. If the reaction rate is proportional to Cx n , then what is the value of ‘n’? (A) 1/4 (B) 2 (C) 4 (D) 16

Description : For the chemical reaction X → Y, it is observed that, on doubling the concentration of 'X', the reaction rate quadruples. If the reaction rate is proportional to Cx n , then what is the value of ‘n’? (A) 1/4 (B) 2 (C) 4 (D) 16

Last Answer : (C) 4

For the chemical reaction P → Q, it is found that the rate of reaction doubles as the concentration of 'P' is doubled. If the reaction rate is proportional to Cp n , then what is the value of 'n' for this chemical reaction? (A) 0 (B) 1 (C) 2 (D) 3

Description : For the chemical reaction P → Q, it is found that the rate of reaction doubles as the concentration of 'P' is doubled. If the reaction rate is proportional to Cp n , then what is the value of 'n' for this chemical reaction? (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

The rate of the chemical reaction A → B doubles as the concentration of A i.e.., CA is doubled. If rate of reaction is proportional to CA n , then what is the value of n for this reaction? (A) 0 (B) 0.5 (C) 1 (D) 2

Description : The rate of the chemical reaction A → B doubles as the concentration of A i.e.., CA is doubled. If rate of reaction is proportional to CA n , then what is the value of n for this reaction? (A) 0 (B) 0.5 (C) 1 (D) 2

Last Answer : (C) 1

The reactions of high molecularity are rare, because (A) Of very large activation energy of many bodies (B) Of low probability of many body collisions (C) Many body collisions are not favoured energetically (D) Of requirement of very large concentration for such reactions

Description : The reactions of high molecularity are rare, because (A) Of very large activation energy of many bodies (B) Of low probability of many body collisions (C) Many body collisions are not favoured energetically (D) Of requirement of very large concentration for such reactions

Last Answer : (B) Of low probability of many body collisions

38. “Increased diversity contributed to higher productivity” –was experimentally proved by ... b) David Tilman b) Paul Ehrlich c) Alexander Von Humbolt d) Robert May

Description : 38. “Increased diversity contributed to higher productivity” –was experimentally proved by ... b) David Tilman b) Paul Ehrlich c) Alexander Von Humbolt d) Robert May

Last Answer : b) David Tilman

18. “Increased diversity contributed to higher productivity” –was experimentally proved by ... a) David Tilman b) Paul Ehrlich c) Alexander Von Humbolt d) Robert May

Description : 18. “Increased diversity contributed to higher productivity” –was experimentally proved by ... a) David Tilman b) Paul Ehrlich c) Alexander Von Humbolt d) Robert May

Last Answer : a) David Tilman

Pick out the wrong statemen(A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an irreversible series reaction (C) The fractional conversion at any time is same for both the constant as well as the variable volume system in case of an irreversible unimolecular type first order reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Description : Pick out the wrong statemen (A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an ... reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Last Answer : (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Description : A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

What is molecularity ?

Description : What is molecularity ?

Last Answer : The number of molecular molecules , atoms or ions that take part in the occurrence of a chemical reaction is called the molecular weight of that sale.

The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Description : The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Last Answer : (B) 2

According to Arrhenius equation of temperature dependency of rate constant for an elementary reaction (A) k ∝ √T (B) k ∝ e -E/RT (C) k ∝ T e -E/RT (D) None of these

Description : According to Arrhenius equation of temperature dependency of rate constant for an elementary reaction (A) k ∝ √T (B) k ∝ e -E/RT (C) k ∝ T e -E/RT (D) None of these

Last Answer : (B) k ∝ e -E/RT

. Reaction of benzene with chlorine gas to produce tri-chlorobenzene exemplifies a/an __________ reaction. (A) Elementary (B) Parallel(C) Consecutive(D) None of these

Description : . Reaction of benzene with chlorine gas to produce tri-chlorobenzene exemplifies a/an __________ reaction. (A) Elementary (B) Parallel (C) Consecutive (D) None of these

Last Answer : (C) Consecutive

There is no correspondence between stoichiometric and the rate equation in case of a/an __________ reaction. (A) Elementary (B) Multiple (C) Autocatalytic (D) Non-elementary

Description : There is no correspondence between stoichiometric and the rate equation in case of a/an __________ reaction. (A) Elementary (B) Multiple (C) Autocatalytic (D) Non-elementary

Last Answer : (D) Non-elementary

The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2(D) 3

Description : The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0.5

The fractional volume change of the system for the isothermal gas phase reaction, A → 3B, between no conversion and complete conversion is (A) 0.5 (B) 1 (C) 2 (D) 3

Description : The fractional volume change of the system for the isothermal gas phase reaction, A → 3B, between no conversion and complete conversion is (A) 0.5 (B) 1 (C) 2 (D) 3

Last Answer : (C) 2

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C