The dimensions of rate constant for reaction 3A → B are (l/gm mole)/min. Therefore the reaction order is (A) 0 (B) 1 (C) 2 (D) 3

The dimensions of rate constant for reaction 3A → B are (l/gm
mole)/min. Therefore the reaction order is
(A) 0
(B) 1
(C) 2
(D) 3
by

1 Answer

Answer :

(C) 2
by

Related questions

Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time requiredto reduce the concentration of reactant from 100 gm moles/litre to 50 gmmoles/litre is same as that required to reduce it from 2 gm moles/litre to 1gm mole/litre in the same volume. Then the order of this reaction is:(A) 0(B) 1(C) 2(D) 3

Description : Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants; but it is afunction of reaction temperature. In a chemical reaction, the time required to ... Then the order of this reaction is: (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min -1? Assume that all the other operating conditions are the same for CSTR and PFR. (A) 0.15(B) 0.30 (C) 0.60 (D) 0.90

Description : For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min ... conditions are the same for CSTR and PFR. (A) 0.15 (B) 0.30 (C) 0.60 (D) 0.90

Last Answer : (C) 0.60

For the reaction as shown in the bellow figure, the rate of formation of Z is 0.2 gm mole/litre.hr. What is the rate of disappearance of X in gm mole/litre.hr? (A) 0.4 (B) 0.1 (C) 0.2 (D) None of these

Description : For the reaction as shown in the bellow figure, the rate of formation of Z is 0.2 gm mole/litre.hr. What is the rate of disappearance of X in gm mole/litre.hr? (A) 0.4 (B) 0.1 (C) 0.2 (D) None of these

Last Answer : (A) 0.4

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

For the gaseous reaction 2A → B, where the feed consists of 50 mole % A and 50 mole % inerts, the expansion factor is (A) 1 (B) -0.5 (C) -0.25 (D) 0

Description : For the gaseous reaction 2A → B, where the feed consists of 50 mole % A and 50 mole % inerts, the expansion factor is (A) 1 (B) -0.5 (C) -0.25 (D) 0

Last Answer : (C) -0.25

The value of gas constant 'R' is (A) 1.987 cal/gm mole °K (B) 1.987 BTU/lb. mole °R (C) Both (A) and (B)(D) Neither (A) nor (B)

Description : The value of gas constant 'R' is (A) 1.987 cal/gm mole °K (B) 1.987 BTU/lb. mole °R (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Pure A in gas phase enters a reactor 50% of this A is converted to Bthrough the reaction, A → 3B. Mole fraction of A in the exit stream is(A) 1/2(B) 1/3(C) 1/4(D) 1/5

Description : Pure A in gas phase enters a reactor 50% of this A is converted to Bthrough the reaction, A → 3B. Mole fraction of A in the exit stream is (A) 1/2 (B) 1/3 (C) 1/4 (D) 1/5

Last Answer : (B) 1/3

. A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two reactors. (A) Both conversion as well as concentration are same (B) Conversion in both will be the same but concentrations will be different (C) Both the conversion as well as concentrations will be different (D) None of these

Description : . A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two ... be different (C) Both the conversion as well as concentrations will be different (D) None of these

Last Answer : (B) Conversion in both will be the same but concentrations will be different

The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Description : The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Last Answer : (B) 2

Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration of A (B) Transition state theory approaches the problem of calculating reaction rates by concentrating on the idea of activated complexes (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases (D) If the rate of an irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Description : Pick out the wrong statement. (A) In a first order reaction, A → products; the reaction becomes slower as it proceeds, because the concentration of A decreases and the rate is proportional to the concentration ... irreversible reaction, A + B → 2C is k.CA .CB , then the reaction is always elementary

Last Answer : (C) According to the penetration theory, the mass transfer co-efficient decreases, if the exposure time of an eddy to the solute decreases

A chemical reaction, A → 3B, is conducted in a constant pressure vessel. Starting with pure A, the volume of the reaction mixture increases 3 times in 6 minutes. The fractional conversion is (A) 0.33 (B) 0.5 (C) 1 (D) Data insufficient, can't be predicted

Description : A chemical reaction, A → 3B, is conducted in a constant pressure vessel. Starting with pure A, the volume of the reaction mixture increases 3 times in 6 minutes. The fractional conversion is (A) 0.33 (B) 0.5 (C) 1 (D) Data insufficient, can't be predicted

Last Answer : (C) 1

The following gas phase reactions are carried out isothermally in a CSTR. A → 2R ; r1 = k1pA ; k1 = 20mole/(sec.m3 bar)A → 3S ; r2 = k2 pA ;k2 = 40mole/(sec.m3.bar)What is the maximum possible value of FR(mole/sec.)?(A) 1/3(B) 1/2(C) 2/3(D) 2

Description : The following gas phase reactions are carried out isothermally in a CSTR. A → 2R ; r1 = k1pA ; k1 = 20mole/(sec.m3 bar) A → 3S ; r2 = k2 pA ; k2 = 40mole/(sec.m3 .bar) What is the maximum possible value of FR(mole/sec.)? (A) 1/3 (B) 1/2 (C) 2/3 (D) 2

Last Answer : (C) 2/3

What is the unit of the rate constant in a chemical reaction in which 10% of the reactant decomposes in one hour, 20% in two hours, 30% in three hours and so on? (A) Litre/mole.second (B) Moles/litre.second (C) Litre/mole (D) Litre/second

Description : What is the unit of the rate constant in a chemical reaction in which 10% of the reactant decomposes in one hour, 20% in two hours, 30% in three hours and so on? (A) Litre/mole.second (B) Moles/litre.second (C) Litre/mole (D) Litre/second

Last Answer : (A) Litre/mole.second

The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Description : The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Last Answer : (A) 0

Half life period of a first order irreversible reaction A → B is (A) k/2 (B) ln k/2 (C) ln 2/k (D) ln 0.5/k

Description : Half life period of a first order irreversible reaction A → B is (A) k/2 (B) ln k/2 (C) ln 2/k (D) ln 0.5/k

Last Answer : (C) ln 2/k

The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2(D) 3

Description : The conversion in a mixed reactor/accomplishing a reaction A → 3R is 50% when gaseous reactant 'A' is introduced at the rate of 1 litre/second and the leaving flow rate is 2 litres/second. The holding time for this operation is __________ second. (A) 0.5 (B) 1 (C) 2 (D) 3

Last Answer : (A) 0.5

For the chemical reaction P → Q, it is found that the rate of reaction doubles as the concentration of 'P' is doubled. If the reaction rate is proportional to Cp n , then what is the value of 'n' for this chemical reaction? (A) 0 (B) 1 (C) 2 (D) 3

Description : For the chemical reaction P → Q, it is found that the rate of reaction doubles as the concentration of 'P' is doubled. If the reaction rate is proportional to Cp n , then what is the value of 'n' for this chemical reaction? (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (B) 1

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

The rate of the chemical reaction A → B doubles as the concentration of A i.e.., CA is doubled. If rate of reaction is proportional to CA n , then what is the value of n for this reaction? (A) 0 (B) 0.5 (C) 1 (D) 2

Description : The rate of the chemical reaction A → B doubles as the concentration of A i.e.., CA is doubled. If rate of reaction is proportional to CA n , then what is the value of n for this reaction? (A) 0 (B) 0.5 (C) 1 (D) 2

Last Answer : (C) 1

The value of 'n' for a chemical reaction A → B, whose reaction rate is → CA n , will be __________ if the rate of the reaction increases by a factor of 8, when the concentration of is doubled. (A) 0 (B) 1 (C) 2 (D) 3

Description : The value of 'n' for a chemical reaction A → B, whose reaction rate is → CA n , will be __________ if the rate of the reaction increases by a factor of 8, when the concentration of is doubled. (A) 0 (B) 1 (C) 2 (D) 3

Last Answer : (D) 3

For a reaction `CH_(3)OCH_(3) (g) rarr CH_(4) (g)+H_(2) (g)+CO(g)` at 750K, the rate constant is `3.52xx10^(-3)" min"^(-1)`. Starting with a pressure

Description : For a reaction `CH_(3)OCH_(3) (g) rarr CH_(4) (g)+H_(2) (g)+CO(g)` at 750K, the rate constant is `3.52xx10^(-3)" min"^(-1)`. Starting with a pressure

Last Answer : For a reaction `CH_(3)OCH_(3) (g) rarr CH_(4) (g)+H_(2) (g)+CO(g)` at 750K, the rate constant ... to become 760 mm Hg ? (Take log 2.25 = 0.352)

The irreversible reaction, X → Y, is the special case of the reversible reaction, X ⇌ Y, in which the (A) Equilibrium constant is infinite (B) Fractional conversion of 'A' at equilibrium is unity (C) Concentration of 'A' at equilibrium is zero (D) All (A), (B) and (C)

Description : The irreversible reaction, X → Y, is the special case of the reversible reaction, X ⇌ Y, in which the (A) Equilibrium constant is infinite (B) Fractional conversion of 'A' at equilibrium is unity (C) Concentration of 'A' at equilibrium is zero (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Sodium reacts with water to form sodium hydroxide and hydrogen gas. The balanced equation which represents the above reaction is (a) Na(s) + 2H20(l) → 2NaOH(aq) + 2H2(g) (b) 2Na(s) + 2H2O(l) → 2NaOH(aq) +H2(g) (c) 2Na(s) + 2H20(l) → NaOH(aq) + 2H2(g) (d) 2Na(s) + H20(l) - 2NaOH(aq) + 2H2(g)

Description : Sodium reacts with water to form sodium hydroxide and hydrogen gas. The balanced equation which represents the above reaction is (a) Na(s) + 2H20(l) → 2NaOH(aq) + 2H2(g) (b) 2Na(s) + 2H2O(l) → 2NaOH(aq) +H2(g) (c) 2Na(s) + 2H20(l) → NaOH(aq) + 2H2(g) (d) 2Na(s) + H20(l) - 2NaOH(aq) + 2H2(g)

Last Answer : Answer: (b)

For the reversible reaction A ⇌ 2B, if the equilibrium constant K is 0.05 mole/litre; starting from initially 2 moles of A and zero moles of B, how many moles will be formed at equilibrium? (A) 0.253 (B) 0.338 (C) 0.152 (D) 0.637

Description : For the reversible reaction A ⇌ 2B, if the equilibrium constant K is 0.05 mole/litre; starting from initially 2 moles of A and zero moles of B, how many moles will be formed at equilibrium? (A) 0.253 (B) 0.338 (C) 0.152 (D) 0.637

Last Answer : (B) 0.338

Looking for source and pricing for nipple O2 adaptor for Hand Held Nebulizers. Constant Flow 7-9 L/min plugs int O2 outlet.?

Description : Looking for source and pricing for nipple O2 adaptor for Hand Held Nebulizers. Constant Flow 7-9 L/min plugs int O2 outlet.?

Last Answer : you can expect to pay over 40 dolalrs

In which type of projection, actual dimensions and angles of objects and therefore shapescannot be preserved? a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Description : In which type of projection, actual dimensions and angles of objects and therefore shapescannot be preserved? a.User Coordinate System b.World Coordinate System c.Screen Coordinate System d.None of the above

Last Answer : b.World Coordinate System

For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a single CSTR for high yield (B) Tubular reactor is preferred over a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Description : For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a ... a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Last Answer : (C) Both (A) and (B)

The experimentally determined overall order of the reaction, A + B → C + D, is two. Then the (A) Reaction is elementary with a molecularity of 2 (B) Molecularity of the reaction is 2, but the reaction may not be elementary (C) Reaction may be elementary with molecularity of 2 (D) Reaction is elementary but the molecularity may not be 2

Description : The experimentally determined overall order of the reaction, A + B → C + D, is two. Then the (A) Reaction is elementary with a molecularity of 2 (B) Molecularity of the reaction is 2, ... Reaction may be elementary with molecularity of 2 (D) Reaction is elementary but the molecularity may not be 2

Last Answer : (A) Reaction is elementary with a molecularity of 2

. For an isothermal second order aqueous phase reaction, A → B, the ratio of the time required for 90% conversion to the time required for 45% conversion is: (A) 2 (B) 4 (C) 11 (D) 22

Description : . For an isothermal second order aqueous phase reaction, A → B, the ratio of the time required for 90% conversion to the time required for 45% conversion is: (A) 2 (B) 4 (C) 11 (D) 22

Last Answer : (C) 11

The concentration of A in a first order reaction, A → B, decreases (A) Linearly with time (B) Exponentially with time (C) Very abruptly towards the end of the reaction (D) Logarithmically with time

Description : The concentration of A in a first order reaction, A → B, decreases (A) Linearly with time (B) Exponentially with time (C) Very abruptly towards the end of the reaction (D) Logarithmically with time

Last Answer : (B) Exponentially with time

A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the process is limited by (A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Description : A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the ... A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Last Answer : (A) Diffusion within the pellet

A second order reaction of the form A + B → C is called a pseudo-first order reaction, when (A) CA0 = CB0 (B) CA0 > CB0 (C) CB0 > CA0 (D) CB0 ≥ CB0

Description : A second order reaction of the form A + B → C is called a pseudo-first order reaction, when (A) CA0 = CB0 (B) CA0 > CB0 (C) CB0 > CA0 (D) CB0 ≥ CB0

Last Answer : (D) CB0 ≥ CB0

The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Description : The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Last Answer : (B) 75

One mole on iron [55.8 gm], when oxidised to `+2` oxidation state gives up :

Description : One mole on iron [55.8 gm], when oxidised to `+2` oxidation state gives up :

Last Answer : One mole on iron [55.8 gm], when oxidised to `+2` oxidation state gives up : A. `1N_(A)` electron B ... C. `3N_(A)` electron D. `0.5` mole of electron

For the chemical reaction X → Y, it is observed that, on doubling the concentration of 'X', the reaction rate quadruples. If the reaction rate is proportional to Cx n , then what is the value of ‘n’? (A) 1/4 (B) 2 (C) 4 (D) 16

Description : For the chemical reaction X → Y, it is observed that, on doubling the concentration of 'X', the reaction rate quadruples. If the reaction rate is proportional to Cx n , then what is the value of ‘n’? (A) 1/4 (B) 2 (C) 4 (D) 16

Last Answer : (C) 4

With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Description : With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Last Answer : (A) Higher in P.F. reactor

For a heterogeneous catalytic reaction, A + B → C, with equimole feed of A and B, the initial rate - rA0 is invariant with total pressure. The rate controlling step is (A) Surface Kc /(1 + TS ) reaction between absorbed A and B in the gas phase (B) Surface reaction between absorbed A and absorbed B (C) Surface reaction between A in the gas phase and absorbed B(D) Desorption of C

Description : For a heterogeneous catalytic reaction, A + B → C, with equimole feed of A and B, the initial rate - rA0 is invariant with total pressure. The rate controlling step is (A) Surface Kc /(1 + TS ) ... A and absorbed B (C) Surface reaction between A in the gas phase and absorbed B (D) Desorption of C

Last Answer : (D) Desorption of C

What is the value of 'n' if the reaction rate of the chemical reaction A → B, is proportional to CA n and it is found that the reaction rate triples, when the concentration of 'A' is increased 9 times? (A) 1/2 (B) 1/3 (C) 1/9 (D) 3

Description : What is the value of 'n' if the reaction rate of the chemical reaction A → B, is proportional to CA n and it is found that the reaction rate triples, when the concentration of 'A' is increased 9 times? (A) 1/2 (B) 1/3 (C) 1/9 (D) 3

Last Answer : (A) 1/2

For reaction, P + 2 → 3R, molar rate of consumption of P is (A) Double of that of Q (B) Same as that of Q (C) Half of that of Q (D) 2/3rd of that of Q

Description : For reaction, P + 2 → 3R, molar rate of consumption of P is (A) Double of that of Q (B) Same as that of Q (C) Half of that of Q (D) 2/3rd of that of Q

Last Answer : (C) Half of that of Q

Determine the values of equilibrium constant (Kc) and ΔG° for the following reaction : Ni(s) + 2Ag+ (aq) → Ni2+ (aq) + 2Ag(s), E° = 1.05 V (1F = 96500 C mol-1 -Chemistry

Description : Determine the values of equilibrium constant (Kc) and ΔG° for the following reaction : Ni(s) + 2Ag+ (aq) → Ni2+ (aq) + 2Ag(s), E° = 1.05 V (1F = 96500 C mol-1 -Chemistry

Last Answer : According to the formula ΔG° = -nFE° = – 2 × 96500 ×1.05 or ΔG° = -202650 J mol-1 = -202.65 KJ mol-1 Now ΔG° ⇒ -202650 J Mol-1 R = 8.314 J/Mol/K, T = 298 K

Find the flux density due to a conductor of length 6m and carrying a current of 3A(in 10 -7 order) a) 1 b) 10 c) 100 d) 0.1

Description : Find the flux density due to a conductor of length 6m and carrying a current of 3A(in 10 -7 order) a) 1 b) 10 c) 100 d) 0.1

Last Answer : a) 1

Dimensions of gravitational constant ‘G’ are: A. [M]-1 [L]3 [T]-2 B. [M] [L]3 [T]-2 C. [M]-1 [L]2 [T]-1 D. [M] [L]-1 [T]2

Description : Dimensions of gravitational constant ‘G’ are: A. [M]-1 [L]3 [T]-2 B. [M] [L]3 [T]-2 C. [M]-1 [L]2 [T]-1 D. [M] [L]-1 [T]2

Last Answer : [M]-1 [L]3 [T]-2

In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the same volume.(A) More than(B) Less than(C) Same as(D) Data insufficient; can't be predicted

Description : In a first order reaction, the time required to reduce the concentration of reactant from 1 mole/litre to 0.5 mole/litre will be __________ that requiredto reduce it from 10 moles/litre to 5 moles/litre in the ... (A) More than (B) Less than (C) Same as (D) Data insufficient; can't be predicted

Last Answer : (C) Same as

An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The residence time required (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Description : An isothermal aqueous phase reversible reaction, P ⇌ R, is to be carried out in a mixed flow reactor. The reaction rate in k.mole/m3 .h is given by, r = 0.5CP - 0.125CR. A stream containing only P enters the reactor. The ... (in hours) for 40% conversion of P is (A) 0.80 (B) 1.33 (C) 1.60 (D) 2.67

Last Answer : (C) 1.60

Insured boxes dimensions and weight limit is a) Max 200X200X100, min as per letter & 2 Kg a) Max 300X200X100, min as per letter & 1 Kg a) Max 100X200X100, min as per letter & 4 Kg a) None of the above

Description : Insured boxes dimensions and weight limit is a) Max 200X200X100, min as per letter & 2 Kg a) Max 300X200X100, min as per letter & 1 Kg a) Max 100X200X100, min as per letter & 4 Kg a) None of the above

Last Answer : a) Max 300X200X100, min as per letter & 1 Kg

Dimensions of Postcards is a) Max 100 X 150 mm & min 80 X 140 mm b) Max 105 X 149 mm & min 90 X 140 mm c) Max 150 X 200 mm & min 70X 140 mm d) None of these

Description : Dimensions of Postcards is a) Max 100 X 150 mm & min 80 X 140 mm b) Max 105 X 149 mm & min 90 X 140 mm c) Max 150 X 200 mm & min 70X 140 mm d) None of these

Last Answer : b) Max 105 X 149 mm & min 90 X 140 mm