For a heterogeneous catalytic reaction, A + B → C, with equimole feed of A and B, the initial rate - rA0 is invariant with total pressure. The rate controlling step is (A) Surface Kc /(1 + TS ) reaction between absorbed A and B in the gas phase (B) Surface reaction between absorbed A and absorbed B (C) Surface reaction between A in the gas phase and absorbed B(D) Desorption of C

For a heterogeneous catalytic reaction, A + B → C, with equimole feed
of A and B, the initial rate - rA0
is invariant with total pressure. The rate
controlling step is
(A) Surface Kc
/(1 + TS
) reaction between absorbed A and B in the gas phase
(B) Surface reaction between absorbed A and absorbed B
(C) Surface reaction between A in the gas phase and absorbed B
(D) Desorption of C
by

1 Answer

Answer :

(D) Desorption of C
by

Related questions

Which of the following is not a chemical step in a fluid solid catalytic reaction? (A) Surface chemical reaction (B) Adsorption (C) Desorption (D) None of these

Description : Which of the following is not a chemical step in a fluid solid catalytic reaction? (A) Surface chemical reaction (B) Adsorption (C) Desorption (D) None of these

Last Answer : (D) None of these

Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Description : Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Last Answer : (B) Film diffusion

If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Description : If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Last Answer : (A) Film

With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Description : With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Last Answer : (A) Higher in P.F. reactor

In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Last Answer : (C) Catalytic homogenous

__________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction. (A) Gas film diffusion (B) Ash diffusion (C) Chemical reaction (D) None of these

Description : __________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction. (A) Gas film diffusion (B) Ash diffusion (C) Chemical reaction (D) None of these

Last Answer : (C) Chemical reaction

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

The rate expression for a heterogeneous catalytic reaction is given by, - rA = K.KA PA(1 + KA.PA + KR.PR), where K is surface reaction rate constant and KA and KR are absorption equilibrium constants of A and R respectively. If KR PR >> (1 + KA PA), the apparent activation energy EA is equal to (given E is the activation energy for the reaction and ΔHR and ΔHA are the activation energies of adsorption of R and A) (A) E (B) E + ΔHA (C) E + ΔHA - ΔHR ) (D) ΔHA + ΔHR

Description : The rate expression for a heterogeneous catalytic reaction is given by, - rA = K.KA PA(1 + KA.PA + KR.PR), where K is surface reaction rate constant and KA and KR are absorption equilibrium constants of A and R respectively. If KR PR ... R and A) (A) E (B) E + ΔHA (C) E + ΔHA - ΔHR ) (D) ΔHA + ΔHR

Last Answer : (C) E + ΔHA - ΔHR )

Determine the values of equilibrium constant (Kc) and ΔG° for the following reaction : Ni(s) + 2Ag+ (aq) → Ni2+ (aq) + 2Ag(s), E° = 1.05 V (1F = 96500 C mol-1 -Chemistry

Description : Determine the values of equilibrium constant (Kc) and ΔG° for the following reaction : Ni(s) + 2Ag+ (aq) → Ni2+ (aq) + 2Ag(s), E° = 1.05 V (1F = 96500 C mol-1 -Chemistry

Last Answer : According to the formula ΔG° = -nFE° = – 2 × 96500 ×1.05 or ΔG° = -202650 J mol-1 = -202.65 KJ mol-1 Now ΔG° ⇒ -202650 J Mol-1 R = 8.314 J/Mol/K, T = 298 K

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

__________ catalytic reaction is involved in the thermal cracking of gas oil. (A) Homogeneous (B) Non-Homogeneous (C) Heterogeneous (D) Non-Heterogeneous

Description : __________ catalytic reaction is involved in the thermal cracking of gas oil. (A) Homogeneous (B) Non-Homogeneous (C) Heterogeneous (D) Non-Heterogeneous

Last Answer : (A) Homogeneous

Which of the following is a controlling factor in very fast heterogeneous reaction? (A) Heat and mass transfer effects (B) Pressure (C) Temperature (D) Composition of reactant

Description : Which of the following is a controlling factor in very fast heterogeneous reaction? (A) Heat and mass transfer effects (B) Pressure (C) Temperature (D) Composition of reactant

Last Answer : (A) Heat and mass transfer effects

The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

Description : The rate controlling step in the manufacture of silicone rubber is the (A) Polymer termination step (B) Condensation of siloxane to silicone (C) Initial hydrolysis of silicone monomer (D) None of these

Last Answer : (C) Initial hydrolysis of silicone monomer

The process employing desorption of the absorbed solute by a solvent is called (A) Elution (B) Osmosis (C) Reverse osmosis (D) Sublimation

Description : The process employing desorption of the absorbed solute by a solvent is called (A) Elution (B) Osmosis (C) Reverse osmosis (D) Sublimation

Last Answer : (A) Elution

Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction?(A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Description : Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction? (A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Last Answer : (A) Ash resistance

In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In the desorption of highly soluble gas from the liquid, the main resistance will be in the __________ phase. (A) Gas (B) Liquid (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (B) Liquid

An important step in protein synthesis is transcription. Which of the following statement(s) is/are true concerning this process? a. The first step in gene transcription involves separating the double helix of DNA by an enzyme known as DNA polymerase b. The initial product of DNA transcription is called heterogeneous nuclear RNA which codes directly for proteins c. After processing is complete, the mRNA is exported from the nucleus to the cytoplasm d. Only one protein can be produced from an initial mRNA strand

Description : An important step in protein synthesis is transcription. Which of the following statement(s) is/are true concerning this process? a. The first step in gene transcription involves separating the double helix ... nucleus to the cytoplasm d. Only one protein can be produced from an initial mRNA strand

Last Answer : Answer: c Transcription of a gene begins at an initiation site associated with a specific DNA sequence, termed a promoter region. After binding to DNA, the RNA polymerase opens up a short ... different proteins from the same gene. mRNA is exported from the nucleus only after processing is complete

For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (C) Chemical reaction

For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (B) Diffusion through ash layer

If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Description : If pore diffusion is the controlling step in a solid catalysed reaction, the catalyst (A) Porosity is very important (B) Porosity is of less importance (C) Internal surface area is utilised efficiently (D) None of these

Last Answer : (B) Porosity is of less importance

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in a reaction involving many steps is the fastest step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Description : Pick out the correct statement. (A) A lower temperature favours the reaction of lower activation energy (B) The dispersion number for a reactor/vessel is uL/D (C) The rate controlling step in ... step (D) Pore volume and porosity of a catalyst is measured by Brunauer￾Emmett-Teller (BET) technique

Last Answer : (A) A lower temperature favours the reaction of lower activation energy

The fractional volume change of the system for the isothermal gas phase reaction, A → 3B, between no conversion and complete conversion is (A) 0.5 (B) 1 (C) 2 (D) 3

Description : The fractional volume change of the system for the isothermal gas phase reaction, A → 3B, between no conversion and complete conversion is (A) 0.5 (B) 1 (C) 2 (D) 3

Last Answer : (C) 2

The fractional volume change between no conversion and complete conversion, for the isothermal gas phase reaction, 2A → R, is (A) 0.5 (B) -0.5 (C) 1 (D) 1.5

Description : The fractional volume change between no conversion and complete conversion, for the isothermal gas phase reaction, 2A → R, is (A) 0.5 (B) -0.5 (C) 1 (D) 1.5

Last Answer : (B) -0.5

Pure A in gas phase enters a reactor 50% of this A is converted to Bthrough the reaction, A → 3B. Mole fraction of A in the exit stream is(A) 1/2(B) 1/3(C) 1/4(D) 1/5

Description : Pure A in gas phase enters a reactor 50% of this A is converted to Bthrough the reaction, A → 3B. Mole fraction of A in the exit stream is (A) 1/2 (B) 1/3 (C) 1/4 (D) 1/5

Last Answer : (B) 1/3

In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Description : In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Last Answer : (C) Temperature

For the gaseous reaction 2A → B, where the feed consists of 50 mole % A and 50 mole % inerts, the expansion factor is (A) 1 (B) -0.5 (C) -0.25 (D) 0

Description : For the gaseous reaction 2A → B, where the feed consists of 50 mole % A and 50 mole % inerts, the expansion factor is (A) 1 (B) -0.5 (C) -0.25 (D) 0

Last Answer : (C) -0.25

The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving force. and, Kp= M.T.C. for diffusion of a gas through a stagnant inert gas with pressure as driving force.) (A) Kc = Kp = Km (B) Kc = Kp /RT = Km . RT/P (C) Kc = Kp . RT = Km . RT/p (D) None of these

Description : The relation among various mass transfer co-efficients (M.T.C) for ideal gases is given by (where, Kc & Km are M.T.C. for equimolar counter diffusion with concentration & mole fraction respectively as the driving ... (C) Kc = Kp . RT = Km . RT/p (D) None of these

Last Answer : (C) Kc = Kp . RT = Km . RT/p

The rate of a gas phase reaction is given by K . CA . CB. If the volume of the reaction vessel is reduced to l/4th of its initial volume, then the reaction rate compared to the original rate will be __________ times. (A) 4 (B) 16 (C) 8 (D) 2

Description : The rate of a gas phase reaction is given by K . CA . CB. If the volume of the reaction vessel is reduced to l/4th of its initial volume, then the reaction rate compared to the original rate will be __________ times. (A) 4 (B) 16 (C) 8 (D) 2

Last Answer : (B) 16

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Which of the following is incorrect about heterogeneous catalysis? a. The most effective catalysts are those which have small surface area b. Seperation of catlyst is easy c. Increase in the rate of reaction is due to decrease in the activation energy d. It is based upon the phenomenon of adsorption

Description : Which of the following is incorrect about heterogeneous catalysis? a. The most effective catalysts are those which have small surface area b. Seperation of catlyst is easy c. Increase in the rate of reaction is due to decrease in the activation energy d. It is based upon the phenomenon of adsorption

Last Answer : a. The most effective catalysts are those which have small surface area

When adsorption hysteresis is observed, the desorption equilibrium pressure is __________ that obtained by adsorption. (A) Always lower than (B) Always higher than (C) Same as (D) Dependent on the system; can be either lower or higher than

Description : When adsorption hysteresis is observed, the desorption equilibrium pressure is __________ that obtained by adsorption. (A) Always lower than (B) Always higher than (C) Same as (D) Dependent on the system; can be either lower or higher than

Last Answer : (A) Always lower than

Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the flooding velocity, generally (C) 'Elution' means the desorption of the adsorbed solute by a solvent (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Description : Pick out the wrong statement: (A) Change in barometric pressure does not affect the relative humidity (B) In case of a packed tower, the operating velocity is about half of the ... (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Last Answer : (D) The equilibrium moisture content of the solid can be reduced by increasing the absolute humidity

Though, theoretically the adsorption & desorption isotherms is expected to coincide but sometimes at least a part of the isotherms does not coincide and this phenomenon is known as adsorption hysteresis. In such cases, the desorption equilibrium pressure is __________ that obtained for adsorption. (A) Lower than (B) Higher than (C) Same as (D) Either same or higher than

Description : Though, theoretically the adsorption & desorption isotherms is expected to coincide but sometimes at least a part of the isotherms does not coincide and this phenomenon is known as adsorption hysteresis. In such ... (B) Higher than (C) Same as (D) Either same or higher than

Last Answer : (A) Lower than

In which of the following reaction equilibrium, the value of equilibrium constant Kp will be more than is Kc? (A) 2HI ⇌ H2 + I2 (B) N2O4 ⇌ 2NO2 (C) 2SO2 + O2 ⇌ 2SO3 (D) None of these

Description : In which of the following reaction equilibrium, the value of equilibrium constant Kp will be more than is Kc? (A) 2HI ⇌ H2 + I2 (B) N2O4 ⇌ 2NO2 (C) 2SO2 + O2 ⇌ 2SO3 (D) None of these

Last Answer : (B) N2O4 ⇌ 2NO2

Pick out the correct statement. (A) Reaction of NH3 with HNO3 to produce (NH4 )2NO3 is endothermic (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total feed rate (C) Biuret (an intermediate during urea manufacture) is toxic to seeds and animals (D) Both (B) and (C)

Description : Pick out the correct statement. (A) Reaction of NH3 with HNO3 to produce (NH4 )2NO3 is endothermic (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total ... (an intermediate during urea manufacture) is toxic to seeds and animals (D) Both (B) and (C)

Last Answer : (B) With increase in NH3 /CO2 ratio, urea yield decreases for a given temperature, pressure and total feed rate

In the biosynthesis of cholesterol, the step which controls the rate and locus of metabolic regulation is (A) Geranyl pyrophosphate farnesyl pyrophosphate (B) Squalene → lanosterol (C) HMG CoA → mevalonate (D) Lanosterol → 1, 4-desmethyl lanosterol

Description : In the biosynthesis of cholesterol, the step which controls the rate and locus of metabolic regulation is (A) Geranyl pyrophosphate farnesyl pyrophosphate (B) Squalene → lanosterol (C) HMG CoA → mevalonate (D) Lanosterol → 1, 4-desmethyl lanosterol

Last Answer : Answer : C

For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min -1? Assume that all the other operating conditions are the same for CSTR and PFR. (A) 0.15(B) 0.30 (C) 0.60 (D) 0.90

Description : For the liquid phase zero order irreversible reaction A → B, the conversion of A in a CSTR is found to be 0.3 at a space velocity of 0.1min -1 . What will be the conversion for a PFR with a space velocity of 0.2 min ... conditions are the same for CSTR and PFR. (A) 0.15 (B) 0.30 (C) 0.60 (D) 0.90

Last Answer : (C) 0.60

. For an isothermal second order aqueous phase reaction, A → B, the ratio of the time required for 90% conversion to the time required for 45% conversion is: (A) 2 (B) 4 (C) 11 (D) 22

Description : . For an isothermal second order aqueous phase reaction, A → B, the ratio of the time required for 90% conversion to the time required for 45% conversion is: (A) 2 (B) 4 (C) 11 (D) 22

Last Answer : (C) 11

The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Description : The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Last Answer : (B) 75

The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Description : The reaction A (l) → R(g) is allowed to reach equilibrium conditions in an autoclave. At equilibrium, there are two phases, one a pure liquid phase of A and the other a vapor phase of A, R and S. Initially A alone is present. The numbers of degrees of freedom are: (A) 1 (B) 2 (C) 3 (D) 0

Last Answer : (B) 2

The Reynolds number of the liquid was increased 100 fold for a laminar falling film used for gas-liquid contacting. Assuming penetrating theory is applicable, the fold increase in the mass transfer co-efficient (Kc ) for the same system is(A) 100(B) 10(C) 5(D) 1.

Description : The Reynolds number of the liquid was increased 100 fold for a laminar falling film used for gas-liquid contacting. Assuming penetrating theory is applicable, the fold increase in the mass transfer co-efficient (Kc ) for the same system is. (A) 100 (B) 10 (C) 5 (D) 1

Last Answer : (B) 10

For a gaseous phase reaction, rate of reaction is equal to K. CA . CB. If the volume of the reactor is suddenly reduced to 1/4th of its initial volume, then the rate of reaction compared to the original rate will be __________ times. (A) 8 (B) 16 (C) 1/8 (D) 1/16

Description : For a gaseous phase reaction, rate of reaction is equal to K. CA . CB. If the volume of the reactor is suddenly reduced to 1/4th of its initial volume, then the rate of reaction compared to the original rate will be __________ times. (A) 8 (B) 16 (C) 1/8 (D) 1/16

Last Answer : (B) 16

The following gas phase reactions are carried out isothermally in a CSTR. A → 2R ; r1 = k1pA ; k1 = 20mole/(sec.m3 bar)A → 3S ; r2 = k2 pA ;k2 = 40mole/(sec.m3.bar)What is the maximum possible value of FR(mole/sec.)?(A) 1/3(B) 1/2(C) 2/3(D) 2

Description : The following gas phase reactions are carried out isothermally in a CSTR. A → 2R ; r1 = k1pA ; k1 = 20mole/(sec.m3 bar) A → 3S ; r2 = k2 pA ; k2 = 40mole/(sec.m3 .bar) What is the maximum possible value of FR(mole/sec.)? (A) 1/3 (B) 1/2 (C) 2/3 (D) 2

Last Answer : (C) 2/3

A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the process is limited by (A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Description : A first order reaction A → B occurs in an isothermal porous catalyst pellet of spherical shape. If the concentration of A at the centre of the pellet is much less than at the external surface, the ... A) Diffusion within the pellet (B) Reaction (C) External mass transfer (D) None of the above

Last Answer : (A) Diffusion within the pellet

The relation between Kc and Kp for the reaction A(g) + B(g) ⇌ 2C(g) + D(g) is :

Description : The relation between Kc and Kp for the reaction A(g) + B(g) ⇌ 2C(g) + D(g) is :

Last Answer : The relation between Kc and Kp for the reaction A(g) + B(g) ⇌ 2C(g) + D(g) is : a. Kc = Kp/RT b. Kp ... Kc = \(\frac{1}{\sqrt{Kp}}\) d. Kp/Kc = 1