Non-catalytic fluid-solid reactions are represented by __________ model. (A) Continuous reaction (B) Unreacted core (C) Both (A) and (B) (D) Neither (A) and (B)

Non-catalytic fluid-solid reactions are represented by __________
model.
(A) Continuous reaction
(B) Unreacted core
(C) Both (A) and (B)
(D) Neither (A) and (B)
by

1 Answer

Answer :

(C) Both (A) and (B)
by

Related questions

Unreacted core model' represents the reaction involving (A) Combustion of coal particles (B) Roasting of sulphide ores (C) Manufacture of carbon disulphide from elements (D) None of these

Description : Unreacted core model' represents the reaction involving (A) Combustion of coal particles (B) Roasting of sulphide ores (C) Manufacture of carbon disulphide from elements (D) None of these

Last Answer : (B) Roasting of sulphide ores

__________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction. (A) Gas film diffusion (B) Ash diffusion (C) Chemical reaction (D) None of these

Description : __________ is the controlling step in a highly temperature sensitive fluid-solid non-catalytic reaction. (A) Gas film diffusion (B) Ash diffusion (C) Chemical reaction (D) None of these

Last Answer : (C) Chemical reaction

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non catalytic reaction of particles with surrounding fluid, the same needed to achieve the same fractional conversion for particles of different unchanging sizes is proportional to the particle diameter, when the ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (C) Chemical reaction

For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, when the __________ is the controlling resistance. (A) Film diffusion (B) Diffusion through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Description : For the non-catalytic reaction of particles with surrounding fluid, the time needed to achieve the same fractional conversion for particles of different but unchanging sizes is proportional to the square of particle diameter, ... through ash layer (C) Chemical reaction (D) Either (A), (B) or (C)

Last Answer : (B) Diffusion through ash layer

If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Description : If a solid-gas non-catalytic reaction occurs at very high temperature, the rate controlling step is the __________ diffusion. (A) Film (B) Ash layer (C) Pore (D) None of these

Last Answer : (A) Film

Which of the following is not a chemical step in a fluid solid catalytic reaction? (A) Surface chemical reaction (B) Adsorption (C) Desorption (D) None of these

Description : Which of the following is not a chemical step in a fluid solid catalytic reaction? (A) Surface chemical reaction (B) Adsorption (C) Desorption (D) None of these

Last Answer : (D) None of these

The gasification reaction represented by, C + H2O = CO + H2 , is a/an __________ reaction. (A) Exothermic (B) Endothermic (C) Catalytic (D) Autocatalytic

Description : The gasification reaction represented by, C + H2O = CO + H2 , is a/an __________ reaction. (A) Exothermic (B) Endothermic (C) Catalytic (D) Autocatalytic

Last Answer : (B) Endothermic

In case of __________ reactions, the reaction rate does not decrease appreciably as the reaction proceeds. (A) Catalytic (B) Parallel (C) Series (D) Auto catalytic

Description : In case of __________ reactions, the reaction rate does not decrease appreciably as the reaction proceeds. (A) Catalytic (B) Parallel (C) Series (D) Auto catalytic

Last Answer : (D) Auto catalytic

In the fluid catalytic cracker (FCC), the cracking reaction is __________ (i) and the regeneration is__________ (ii) __________(A) (i) exothermic (ii) endothermic (B) (i) exothermic (ii) exothermic (C) (i) endothermic (ii) endothermic (D) (i) endothermic (ii) exothermic.

Description : In the fluid catalytic cracker (FCC), the cracking reaction is __________ (i) and the regeneration is__________ (ii) __________. (A) (i) exothermic (ii) endothermic (B) (i) exothermic (ii) exothermic (C) (i) endothermic (ii) endothermic (D) (i) endothermic (ii) exothermic

Last Answer : (D) (i) endothermic (ii) exothermic

Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Description : Which one is the rate controlling step in a solid-gas non-catalytic reaction occurring at very high temperature? (A) Pore diffusion (B) Film diffusion (C) Ash layer diffusion (D) Chemical reaction

Last Answer : (B) Film diffusion

The gasification reaction represented by, C + H2O = CO + H2 , is (A) Exothermic (B) Endothermic (C) Catalytic (D) Autocatalytic

Description : The gasification reaction represented by, C + H2O = CO + H2 , is (A) Exothermic (B) Endothermic (C) Catalytic (D) Autocatalytic

Last Answer : (B) Endothermic

Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) NH3 synthesis reaction

Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Design of heterogamous catalytic reactor involves consideration of __________ steps. (A) Only chemical (B) Only physical (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C(B) Most of the enzyme catalysed reactions involve at least two substrates (C) Enzymes help in increasing the activation energy of the reaction (D) Equilibrium concentrations in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Description : Pick out the wrong statement. (A) Catalytic activity of enzyme catalysed reactions which is affected by temperature, pH value & chemical agents, is maximum at a temperature of about 45°C ... in enzyme catalysed reactions can be calculated by using the thermodynamic properties of substrates & prod

Last Answer : (C) Enzymes help in increasing the activation energy of the reaction

Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of the reacting molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Description : Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of ... molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Last Answer : (C) A catalyst lowers the activation energy of the reacting molecules

For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption. (A) Physical (B) Chemical (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For a solid catalysed chemical reaction, the effectiveness of solid catalyst depends upon the __________ adsorption. (A) Physical (B) Chemical (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) Chemical

Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Fanning friction factor equation applies to the __________ fluid flow. (A) Non-isothermal condition of (B) Compressible (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Applicability of Bernoulli's equation is limited to a/an __________ fluid, that does not exchange shaft work with the surroundings. (A) Incompressible (B) Non-viscous (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Applicability of Bernoulli's equation is limited to a/an __________ fluid, that does not exchange shaft work with the surroundings. (A) Incompressible (B) Non-viscous (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The main factor on which the behaviour of a mass of fluidised solid depends mainly is the (A) Fluid characteristics (B) Particle size (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The main factor on which the behaviour of a mass of fluidised solid depends mainly is the (A) Fluid characteristics (B) Particle size (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The effect of solid boundary on the fluid flow is confined to the boundary layer, except for fluids (A) Having high viscosities (B) Moving at low velocities (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Description : In chamber process of sulphuric acid manufacture in industry, the gas phase oxidation of SO2 to SO3 is accomplished by a __________ reaction. (A) Non-catalytic homogeneous (B) Non-catalytic heterogeneous (C) Catalytic homogenous (D) Catalytic heterogeneous

Last Answer : (C) Catalytic homogenous

__________ catalytic reaction is involved in the thermal cracking of gas oil. (A) Homogeneous (B) Non-Homogeneous (C) Heterogeneous (D) Non-Heterogeneous

Description : __________ catalytic reaction is involved in the thermal cracking of gas oil. (A) Homogeneous (B) Non-Homogeneous (C) Heterogeneous (D) Non-Heterogeneous

Last Answer : (A) Homogeneous

In the reaction, represented by, 2SO2 + O2 ⇌ 2SO3; ΔH = - 42 kcal; the forward reaction will be favoured by (A) Low temperature (B) High pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : In the reaction, represented by, 2SO2 + O2 ⇌ 2SO3; ΔH = - 42 kcal; the forward reaction will be favoured by (A) Low temperature (B) High pressure (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction?(A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Description : Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction? (A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products

Last Answer : (A) Ash resistance

The space time is equivalent to the holding time in a steady state mixed reactor for (A) Non-isothermal gas reaction (B) Variable fluid density systems (C) Constant fluid density systems(D) Gas reactions with changing number of moles

Description : The space time is equivalent to the holding time in a steady state mixed reactor for (A) Non-isothermal gas reaction (B) Variable fluid density systems (C) Constant fluid density systems (D) Gas reactions with changing number of moles

Last Answer : (C) Constant fluid density systems

Petroleum coke is commercially produced by the __________ process. (A) Hydrocracking (B) Visbreaking (C) Fluid catalytic cracking (D) Delayed coking

Description : Petroleum coke is commercially produced by the __________ process. (A) Hydrocracking (B) Visbreaking (C) Fluid catalytic cracking (D) Delayed coking

Last Answer : (D) Delayed coking

The single parameter model proposed for describing non-ideal flow is the __________ model. (A) Tank in series (B) Dispersion (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The single parameter model proposed for describing non-ideal flow is the __________ model. (A) Tank in series (B) Dispersion (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Description : Pick out the correct statement. (A) A forced vortex occurs when fluid rotates as a solid about an axis (B) In laminar flow, Newton's law of viscosity does not apply (C) A free vortex occurs, when fluid rotates as a solid (D) In turbulent flow, there are neither cross-currents nor eddies

Last Answer : (A) A forced vortex occurs when fluid rotates as a solid about an axis

In the reversible reaction of the type, A + B ⇌ AB, in general (A) Both forward and backward reactions will be exothermic (B) Neither of the reactions will be endothermic (C) The combination reaction will be exothermic, while the dissociation reaction will be endothermic (D) The combination reaction will be endothermic, while the dissociation reaction will be exothermic

Description : In the reversible reaction of the type, A + B ⇌ AB, in general (A) Both forward and backward reactions will be exothermic (B) Neither of the reactions will be endothermic (C) ... will be endothermic (D) The combination reaction will be endothermic, while the dissociation reaction will be exothermic

Last Answer : (C) The combination reaction will be exothermic, while the dissociation reaction will be endothermic

For multiple reactions, the flow pattern within the vessel affects the (A) Size requirement (B) Distribution of reaction products (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For multiple reactions, the flow pattern within the vessel affects the (A) Size requirement (B) Distribution of reaction products (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In catalytic alkylation, higher iso-butane to olefin ratio gives (A) Low final boiling point product (B) Higher yield (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (A) Low final boiling point product

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

In Hydrofining catalytic desulphurisation process for sweetening of petroleum products, use of hydrogen (A) Enhances the desulphurisation process (B) Minimises coke formation (C) Both (A) and (B) (D) Neither (A) nor (B

Description : In Hydrofining catalytic desulphurisation process for sweetening of petroleum products, use of hydrogen (A) Enhances the desulphurisation process (B) Minimises coke formation (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) and (B)

In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

1.250 g of metal carbonate `(MCO_(3))` was treated with 500 mL of 0.1 M HCl solution. The unreacted HCl required 50.0 mL of 0.500 M NaOH solution for

Description : 1.250 g of metal carbonate `(MCO_(3))` was treated with 500 mL of 0.1 M HCl solution. The unreacted HCl required 50.0 mL of 0.500 M NaOH solution for

Last Answer : 1.250 g of metal carbonate `(MCO_(3))` was treated with 500 mL of 0.1 M HCl solution. The unreacted HCl ... the metal M A. Mg B. Ca C. Sr D. Ba

Extraction of `Ag` from sulphide ore and removal of unreacted silver bromide from phorographic plate involve complexes:

Description : Extraction of `Ag` from sulphide ore and removal of unreacted silver bromide from phorographic plate involve complexes:

Last Answer : Extraction of `Ag` from sulphide ore and removal of unreacted silver bromide from phorographic plate involve ... (3))_(2)]^(3-)` respectively

Keeping in view the ‘fluid mosaic model’ for the structure of cell membrane, which one of the following statement is correct with respect to the movements of lipids and proteins from one lipid monolayer to the other (described as flip-flop movement)?(a) While proteins can flip-flop, lipids can not (b) Neither lipids, nor proteins can flip-flop (c) Both lipids and proteins can flip-flop (d) While lipids can rarely flip-flop, proteins cannot.

Description : Keeping in view the fluid mosaic model' for the structure of cell membrane, which one of the following statement is correct with respect to the movements of lipids and proteins from one lipid ... ) Both lipids and proteins can flip-flop (d) While lipids can rarely flip-flop, proteins cannot.

Last Answer : (d) While lipids can rarely flip-flop, proteins cannot.

The rate of shear versus the shear stress curves are time dependent for __________ fluid. (A) Thixotropic (B) Rheopectic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The rate of shear versus the shear stress curves are time dependent for __________ fluid. (A) Thixotropic (B) Rheopectic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

An ideal fluid is (A) Non-viscous (B) Incompressible (C) Both (A) & (B) (D) Neither (A) & (B

Description : An ideal fluid is (A) Non-viscous (B) Incompressible (C) Both (A) & (B) (D) Neither (A) & (B

Last Answer : (C) Both (A) & (B)

For __________ drying, the effects of velocity, temperature and humidity of the gas and the thickness of the solid are the same. (A) Unsaturated surface (B) Constant rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : For __________ drying, the effects of velocity, temperature and humidity of the gas and the thickness of the solid are the same. (A) Unsaturated surface (B) Constant rate (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Combustion reaction of fuels is a/an __________ reaction. (A) Auto catalytic (B) Exothermic (C) Endothermic (D) None of these

Description : Combustion reaction of fuels is a/an __________ reaction. (A) Auto catalytic (B) Exothermic (C) Endothermic (D) None of these

Last Answer : (B) Exothermic

Formation of ammonium carbamate by reaction of NH3 with CO2 is a/an __________ reaction. (A) Catalytic (B) Exothermic (C) Endothermic (D) Reversible

Description : Formation of ammonium carbamate by reaction of NH3 with CO2 is a/an __________ reaction. (A) Catalytic (B) Exothermic (C) Endothermic (D) Reversible

Last Answer : (B) Exothermic

Dehydration of ammonium carbamate to yield urea is a/an __________ reaction. (A) Exothermic (B) Endothermic (C) Autocatalytic (D) Catalytic

Description : Dehydration of ammonium carbamate to yield urea is a/an __________ reaction. (A) Exothermic (B) Endothermic (C) Autocatalytic (D) Catalytic

Last Answer : (B) Endothermic

Dehydration of ammonium carbamate (to produce urea) is a/an __________ reaction. (A) Reversible (B) Catalytic(C) Exothermic(D) Endothermic

Description : Dehydration of ammonium carbamate (to produce urea) is a/an __________ reaction. (A) Reversible (B) Catalytic (C) Exothermic (D) Endothermic

Last Answer : (D) Endothermic

Neutralisation of nitric acid with ammonia to produce ammonium nitrate is a/an __________ reaction. (A) Catalytic (B) Endothermic (C) Exothermic (D) Autocatalytic

Description : Neutralisation of nitric acid with ammonia to produce ammonium nitrate is a/an __________ reaction. (A) Catalytic (B) Endothermic (C) Exothermic (D) Autocatalytic

Last Answer : (C) Exothermic

A reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Catalytic (B) Autocatalytic (C) Photochemical

Description : A reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Catalytic (B) Autocatalytic (C) Photochemical

Last Answer : (C) Photochemical

Kinetics of a catalytic reaction can be best studied on a/an __________ reactor. (A) Mixed (B) Integral (plug flow) (C) Differential (flow) (D) Either (A), (B) and (C)

Description : Kinetics of a catalytic reaction can be best studied on a/an __________ reactor. (A) Mixed (B) Integral (plug flow) (C) Differential (flow) (D) Either (A), (B) and (C)

Last Answer : (D) Either (A), (B) and (C)

The reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Biochemical (B) Photochemical (C) Catalytic (D) Autocatalytic

Description : The reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Biochemical (B) Photochemical (C) Catalytic (D) Autocatalytic

Last Answer : (D) Autocatalytic