Description : The reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Biochemical (B) Photochemical (C) Catalytic (D) Autocatalytic
Last Answer : (D) Autocatalytic
Description : In autocatalytic reactions, (A) One of the reactants acts as a catalyst (B) One of the products acts as a catalyst (C) Catalysts have very high selectivity (D) No catalyst is used
Last Answer : (B) One of the products acts as a catalyst
Description : The rate of reaction of a/an __________ reaction is not affected by temperature rise. (A) Autocatalytic (B) Photochemical (C) Consecutive (D) Zero order
Last Answer : (B) Photochemical
Description : Dehydration of ammonium carbamate to yield urea is a/an __________ reaction. (A) Exothermic (B) Endothermic (C) Autocatalytic (D) Catalytic
Last Answer : (B) Endothermic
Description : Neutralisation of nitric acid with ammonia to produce ammonium nitrate is a/an __________ reaction. (A) Catalytic (B) Endothermic (C) Exothermic (D) Autocatalytic
Last Answer : (C) Exothermic
Description : The gasification reaction represented by, C + H2O = CO + H2 , is a/an __________ reaction. (A) Exothermic (B) Endothermic (C) Catalytic (D) Autocatalytic
Description : Which of the following is an autocatalytic reaction? (A) Photochemical reactions (B) Microbial fermentation reactio (C) Enzyme fermentation reaction (D) Ammonia synthesis reaction
Last Answer : (B) Microbial fermentation reaction
Description : The gasification reaction represented by, C + H2O = CO + H2 , is (A) Exothermic (B) Endothermic (C) Catalytic (D) Autocatalytic
Description : Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic
Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o
Last Answer : (A) Proportional to
Description : The equilibrium constant of a catalytic chemical reaction __________ due to the presence of a catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable from the data
Last Answer : (C) Remain unaffected
Description : Oxidation of ammonia is (A) Exothermic (B) Endothermic (C) Non-catalytic (D) Autocatalytic
Last Answer : (A) Exothermic
Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base
Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene
Description : Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO
Last Answer : (C) K2O
Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction
Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction
Description : Catalytic action in a catalytic chemical reaction follows from the ability of catalyst to change the (A) Activation energy (B) Equilibrium constant (C) Heat of reaction (D) None of these
Last Answer : (A) Activation energy
Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction
Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot
Description : Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of ... molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction
Last Answer : (C) A catalyst lowers the activation energy of the reacting molecules
Description : Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay (D) All (A), (B) & (C)
Last Answer : (D) All (A), (B) & (C)
Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98
Last Answer : (D) 98
Description : There is no correspondence between stoichiometric and the rate equation in case of a/an __________ reaction. (A) Elementary (B) Multiple (C) Autocatalytic (D) Non-elementary
Last Answer : (D) Non-elementary
Description : The rate of reaction does not decrease appreciably as the reaction proceeds in case of __________ reactions. (A) Autocatalytic (B) Exothermic (C) Endothermic (D) Autothermal
Last Answer : (A) Autocatalytic
Description : Hydrogenation of vegetable oils is a/an __________ reaction. (A) Endothermic (B) Autocatalytic (C) Exothermic (D) Homogenous
Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C
Last Answer : (D) All (A), (B) and (C
Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel
Last Answer : (A) Silica-alumina
Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride
Last Answer : (A) Platinum on alumina
Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide
Last Answer : (A) Phosphoric acid on kieselguhr
Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Catalyst used in catalytic polymerisation which produces polymergasoline is (A) H2SO4 (B) H3PO4 (C) Both (A) and (B) (D) AlCl3
Last Answer : (C) Both (A) and (B)
Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed
Last Answer : (B) High cost of the high pressure vessel used for the reactor
Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)
Description : A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)
Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum
Last Answer : (D) Platinum
Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide
Last Answer : Option B
Description : The reaction between oxygen and organic material is a/an __________ reaction. (A) Exothermic (B) Endothermic (C) Biochemical (D) Photochemical
Description : Exposure of a photographic plate to produce a latent image is an example of __________ reaction. (A) Very slow (B) Very fast (C) Photochemical (D) Both (B) and (C)
Last Answer : (D) Both (B) and (C)
Description : A photochemical reaction is __________ light. (A) Initiated by (B) Accompanied with emission of (C) Catalysed by (D) Used to convert heat energy into
Last Answer : (A) Initiated by
Description : Which of the following resistances is not involved in a gas phase catalytic (gas-solid) reaction? (A) Ash resistance (B) Gas film and pore surface diffusion resistances for reactants (C) Surface phenomenon resistance (D) Gas film and pore surface diffusion resistances for products
Last Answer : (A) Ash resistance
Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction
Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction
Description : The temperature at which the catalytic activity of the catalyst is maximum, is called (1) room temperature (2) critical temperature (3) absolute temperature (4) optimum temperature
Last Answer : d) optimum temperature
Description : The combustion reaction, C + O2 = CO2 , is (A) Exothermic (B) Endothermic (C) Autocatalytic
Description : Liquid ammonia and 60% nitric acid reaction (which producesammonium nitrate) is (A) Exothermic (B) Endothermic (C) Autocatalytic (D) None of these
Description : Ammonia synthesis reaction is (A) Exothermic (B) Endothermic (C) Autocatalytic (D) None of these
Description : Conversion increases with increase in temperature in case of a/an__________ reaction. (A) Autocatalytic (B) Irreversible (C) Reversible endothermic (D) Reversible exothermic
Last Answer : (C) Reversible endothermic
Description : Pick out the wrong statemen (A) Autocatalytic reactions are exemplified by microbial fermentation reactions (B) The slowest step has the greatest influence on the overall reaction rate in case of an ... reaction (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction
Last Answer : (D) Hydrolysis of ester in presence of alkali or acid is a zero order reaction
Description : Rate of an autocatalytic chemical reaction is a function of (A) Temperature only (B) Pressure only (C) Composition only (D) All (A), (B) and (C)
Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction
Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity
Description : The combustion reaction, C + O2 = CO2 , is (A) Exothermic (B) Endothermic (C) Autocatalytic (D) None of these
Description : Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total surface area of 6291456 `cm^(2)
Last Answer : Finely divided catalyst has greater surface area and has greater catalytic activity than the compact solid. If a total ... B. `80` C. `20` D. `22`
Description : 2-Butyne undergoes catalytic hydrogenation in the presence of Lindlar's catalyst to give (a) 2-Butene (b) Butane (c) 1-Butene (d) 2-Methylpropene
Last Answer : 2-Butene