For a tubular flow reactor with uniform concentration and temperature, the independent variable is (A) Time (B) Length (C) Diameter (D) None of these

For a tubular flow reactor with uniform concentration and
temperature, the independent variable is
(A) Time
(B) Length
(C) Diameter
(D) None of these
by

1 Answer

Answer :

(B) Length
by

Related questions

Which of the following is an independent variable for a batch tank reactor with uniform concentration and temperature? (A) Time (B) Useful volume of the tank (C) Diameter of the reactor (D) None of these

Description : Which of the following is an independent variable for a batch tank reactor with uniform concentration and temperature? (A) Time (B) Useful volume of the tank (C) Diameter of the reactor (D) None of these

Last Answer : (A) Time

A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Description : A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

In an ideal tubular-flow reactor (A) There is no mixing in longitudinal direction (B) Mixing takes place in radial direction (C) There is a uniform velocity across the radius (D) All (A), (B) and (C)

Description : In an ideal tubular-flow reactor (A) There is no mixing in longitudinal direction (B) Mixing takes place in radial direction (C) There is a uniform velocity across the radius (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit conversion is 20%, then the exit temperature (in k) is (Data: Heat of reaction at 298 K = - 50000 kJ/ kmole of A reacted Heat capacities CPA = CPB = 100kJ/kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Description : The reaction A → B is conducted in an adiabatic plug flow reactor (PFR). Pure A at a concentration of 2 kmol/m3 is fed to the reactor at the rate of 0.01 m3 /s and at a temperature of 500 K. If the exit ... /kmole. K (may be assumed to be independent of temperature)) (A) 400 (B) 500 (C) 600 (D) 1000

Last Answer : (C) 600

Space time equals the mean residence time (A) When the density of the reaction mixture is constant (B) For large diameter tubular reactor (C) For narrow diameter tubular reactor (D) For CSTR

Description : Space time equals the mean residence time (A) When the density of the reaction mixture is constant (B) For large diameter tubular reactor (C) For narrow diameter tubular reactor (D) For CSTR

Last Answer : (A) When the density of the reaction mixture is constant

An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Description : An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Last Answer : (C) Decrease

For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Description : For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Last Answer : (A) Stirred tank

Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a measure of its capacity and is equal to the residence time when the density of reaction mixture is constant (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty (D) In an ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Description : Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a ... ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Last Answer : (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty

The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Description : The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Last Answer : (B) Ideal tubular-flow reactor

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

For the same residence time, which one will give the maximum conversion? (A) Single stirred tank (v = 5 litres) (B) Two stirred tank (each of 2.5 litres) in series (C) Stirred tank followed by tubular flow reactor (each of 2.5 litres) (D) Single tubular flow reactor (v = 5 litres)

Description : For the same residence time, which one will give the maximum conversion? (A) Single stirred tank (v = 5 litres) (B) Two stirred tank (each of 2.5 litres) in series (C) Stirred tank followed by tubular flow reactor (each of 2.5 litres) (D) Single tubular flow reactor (v = 5 litres)

Last Answer : (D) Single tubular flow reactor (v = 5 litres)

Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Description : Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Last Answer : (B) Tubular flow reactor

Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Description : Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same (D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Description : Pick out the wrong statement: (A) Chemical reactions with high activation energy are very temperature sensitive (B) A flat velocity profile exists in a plug flow reactor (C) The residence ... D) Half life of a reaction increases with increased initial concentration for reaction orders more than one

Last Answer : (C) The residence time for all the elements of fluid in case of a P.F.R. need not be same

Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate or larger amounts of data (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order (D) The ratio of volumes of plug flow reactor to that of mixed reactor is always less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Description : Pick out the wrong statement. (A) The integral method of analysing kinetic data is used when the data is scattered (B) The differential method of analysing kinetic data requires more accurate ... less than one for identical feed composition, flow rate, conversion and for all positive reaction orders

Last Answer : (C) When the reaction rate is independent of temperature, the reaction is said to be of zero order

. A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two reactors. (A) Both conversion as well as concentration are same (B) Conversion in both will be the same but concentrations will be different (C) Both the conversion as well as concentrations will be different (D) None of these

Description : . A first order irreversible reaction, A → B is carried out separately in a constant volume as well as in a variable volume reactor for a particular period. It signifies that __________ in the two ... be different (C) Both the conversion as well as concentrations will be different (D) None of these

Last Answer : (B) Conversion in both will be the same but concentrations will be different

For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a single CSTR for high yield (B) Tubular reactor is preferred over a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Description : For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a ... a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Last Answer : (C) Both (A) and (B)

The energy balance equation over a tubular reactor under transient conditions is (A) An ordinary non-linear differential equation (B) An algebraic differential equation (C) A linear partial differential equation(D) A non-linear partial differential equation

Description : The energy balance equation over a tubular reactor under transient conditions is (A) An ordinary non-linear differential equation (B) An algebraic differential equation (C) A linear partial differential equation (D) A non-linear partial differential equation

Last Answer : (C) A linear partial differential equation

. In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same. (A) Semi-batch(B) Tubular(C) Batch(D) Back-mix

Description : . In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same. (A) Semi-batch (B) Tubular (C) Batch (D) Back-mix

Last Answer : (D) Back-mix

A reactor is generally termed as an autoclave, when it is a (A) High pressure batch reactor (B) Atmospheric pressure tank reactor (C) High pressure tubular reactor (D) Atmospheric pressure CSTR(

Description : A reactor is generally termed as an autoclave, when it is a (A) High pressure batch reactor (B) Atmospheric pressure tank reactor (C) High pressure tubular reactor (D) Atmospheric pressure CSTR

Last Answer : A) High pressure batch reactor

A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) Decreases (B) Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Description : A reversible liquid phase endothermic reaction is to be carried out in a plug flow reactor. For minimum reactor volume, it should be operated such that the temperature along the length (A) ... Increases (C) Is at the highest allowable temperature throughout (D) First increases and then decreases

Last Answer : (C) Is at the highest allowable temperature throughout

For all positive reaction orders for a particular duty, (A) Mixed reactor is always larger than the plug-flow reactor (B) Ratio of the volume of the mixed reactor to that of the plug-flow reactor decreases with order (C) Reactor size is independent of the type of flow (D) Density variation during reaction affects design

Description : For all positive reaction orders for a particular duty, (A) Mixed reactor is always larger than the plug-flow reactor (B) Ratio of the volume of the mixed reactor to that of the plug-flow ... (C) Reactor size is independent of the type of flow (D) Density variation during reaction affects design

Last Answer : (A) Mixed reactor is always larger than the plug-flow reactor

The most unsuitable reactor for carrying out reactions in which high reactant concentration favours high yields is (A) Backmix reactor (B) Plug flow reactor (C) Series of CSTR (D) PFR in series

Description : The most unsuitable reactor for carrying out reactions in which high reactant concentration favours high yields is (A) Backmix reactor (B) Plug flow reactor (C) Series of CSTR (D) PFR in series

Last Answer : A) Backmix reactor

A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume of the reacting mixture is V and the density of the liquid mixture is constant. The mass balance for A is (A) d(VCA )/dt = -F (CAF - CA ) - kCA 2V (B) d(VCA )/dt = F (CAF - CA ) - kCA 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Description : A second order liquid phase reaction, A → B, is carried out in a mixed flow reactor operated in semi batch mode (no exit stream). The reactant A at concentration CAF is fed to the reactor at a volumetric flow rate of F. The volume ... 2V (C) d(VCA )/dt = -FCA - kCA 2V (D) d(VCA )/dt = FCAF - kCA 2V

Last Answer : (D) d(VCA )/dt = FCAF - kCA 2V

In a fluidised bed reactor (A) Temperature gradients are very high (B) Temperature is more or less uniform (C) Hot spots are formed (D) Segregation of the solids occurs

Description : In a fluidised bed reactor (A) Temperature gradients are very high (B) Temperature is more or less uniform (C) Hot spots are formed (D) Segregation of the solids occurs

Last Answer : (B) Temperature is more or less uniform

Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocity(B) Newton's law of viscosity is not applicable to the turbulent flow of fluidwith linear velocity distribution(C) Laminar flow of viscous liquids is involved in the lubrication of varioustypes of bearings(D) Rise of water in capillary tubes reduces with the increasing diameter ofcapillary tubes

Description : Pick out the wrong statement. (A) A fluid mass is free from shearing forces, when it is made to rotate with a uniform velocit (B) Newton's law of viscosity is not applicable to the ... types of bearings (D) Rise of water in capillary tubes reduces with the increasing diameter of capillary tubes

Last Answer : (B) Newton's law of viscosity is not applicable to the turbulent flow of fluid with linear velocity distribution

An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Description : An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Last Answer : (B) Tapering pipe at either decreasing or increasing flow rate

Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric flow rate, cm3 /sec. V = volume, cm3 .) (A) Reactor dispersion number (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Description : Which of the following is not a dimension-less group used in catalysis? (Where, D = dispersion co-efficient, cm2 /sec.D1 = diffusion co-efficient; cm2 /sec L = length of the reactor, cm t = time, sec, v = volumetric ... (D/vL) (B) Reduced time (vt/V) (C) Thiele modulus L √(k/D1 ) (D) None of these

Last Answer : (D) None of these

In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Description : In the gaseous phase ammonia formation reaction (N2 + 3H2 ⇌ 2NH3 ), the value of the equilibrium constant depends on the (A) Total pressure of the system (B) Volume of the reactor (C) Temperature (D) Initial concentration of N2 and H2

Last Answer : (C) Temperature

Critical velocity in a pipe flow (A) Increases as fluid viscosity increases (B) Increases as pipe diameter increases (C) Independent of fluid density (D) None of these

Description : Critical velocity in a pipe flow (A) Increases as fluid viscosity increases (B) Increases as pipe diameter increases (C) Independent of fluid density (D) None of these

Last Answer : (B) Increases as pipe diameter increases

An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum along the length of the reactor (C) Goes through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Description : An endothermic aqueous phase first order irreversible reaction is carried out in an adiabatic plug flow reactor. The rate of reaction: (A) Is maximum at the inlet of the reactor (B) Goes through a maximum ... through a minimum along the length of the reactor (D) Is maximum at the exit of the reactor

Last Answer : (A) Is maximum at the inlet of the reactor

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ ... (A) Hyperbolic (B) Parabolic (C) Linear (D) Logarithmic

Last Answer : (C) Linear

If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Description : If the thermal conductivity of a wall material is independent of temperature, the steady state temperature distribution in the very large thin plane wall having steady, uniform surface temperature follows __________ law. (A) Parabolic (B) Hyperbolic (C) Linear (D) Logarithmic

Last Answer : (A) Parabolic

The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Description : The loss of head due to friction in a pipe of uniform diameter in which a viscous flow is taking place, is (where RN = Reynold number) (A) 1/RN (B) 4/RN (C) 16/RN (D) 64/RN

Last Answer : Answer: Option C

The ratio of the length and diameter of a simply supported uniform circular beam which experiences maximum bending stress equal to tensile stress due to same load at its mid span, is (A) 1/8 (B) 1/4 (C) 1/2 (D) 1/3

Description : The ratio of the length and diameter of a simply supported uniform circular beam which  experiences maximum bending stress equal to tensile stress due to same load at its mid span, is  (A) 1/8  (B) 1/4  (C) 1/2  (D) 1/3 

Last Answer : (C) 1/2 

The deflection of a uniform circular bar of diameter d and length , which extends by an amount under a tensile pull , when it carries the same load at its mid-span, is (A) el/2d (B) e²l/3d² (C) el²/3d² (D) e²l²/3d

Description : The deflection of a uniform circular bar of diameter d and length , which extends by an  amount under a tensile pull , when it carries the same load at its mid-span, is  (A) el/2d (B) e²l/3d² (C) el²/3d² (D) e²l²/3d

Last Answer : (C) el²/3d

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose ends are hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2 , the permissible maximum crippling load will be (A) 1.288 tonnes (B) 12.88 (C) 128.8 tonnes (D) 288.0

Last Answer : (B) 12.88

A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Description : A compound pipe of diameter d1, d2 and d3 having lengths l1, l2 and l3 is to be replaced by an equivalent pipe of uniform diameter d and of the same length (l) as that of the compound pipe. The size of the equivalent pipe is given by (A) l/d² = + + (B) l/d³ = + ) + (C) = + + (D)

Last Answer : Answer: Option D

The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0

Description : The length of a column, having a uniform circular cross-section of 7.5 cm diameter and whose endsare hinged, is 5 m. If the value of E for the material is 2100 tonnes/cm2, the permissible maximumcrippling load will be (a) 1.288 tonnes (b) 12.88 (c) 128.8 tonnes (d) 288.0

Last Answer : (b) 12.88

Which of the following concerning the pH of urine is correct? 1) is a useful indicator of the acid/base balance of the blood 2) rises on a vegetarian diet 3) is determined by the concentration of ammonium 4) is lower than 5.5 in renal tubular acidosis 5) would be above 7.0 after prolonged and severe vomiting

Description : Which of the following concerning the pH of urine is correct? 1) is a useful indicator of the acid/base balance of the blood 2) rises on a vegetarian diet 3) is determined by the concentration of ... lower than 5.5 in renal tubular acidosis 5) would be above 7.0 after prolonged and severe vomiting

Last Answer : Answers-2 c - excretion of ammonium occurs when an acid urine is produced but the pH of urine is of course determined by the concentration of H+ ions d-unable to lower the pH to ... and distal nephron and this perpetuates the metabolic alkalosis until the fluid balance is restored with IV fluids.

The tubular and dorsal nervous system of chordates is related to the cephalization in these animals and to bilateral symmetry. The presence of neural integrating centers with concentration of neurons in the brains and the spinal cord (central nervous system, CNS) allowed the increase of the interaction complexity between these animals and the environment. Receptor (afferent conduction) and efferent (motor, regulatory and behavioral reactions) functions come out more sophisticated in chordates due to the presence of more well-developed neural networks. These features have been preserved by evolution as they provide adaptive advantage to their owners.

Description : The tubular and dorsal nervous system of chordates is related to the cephalization in these animals and to bilateral symmetry. The presence of neural integrating centers with concentration of ... These features have been preserved by evolution as they provide adaptive advantage to their owners.

Last Answer : How can the tubular-dorsal nervous system in chordates be compared to the nervous pattern present in invertebrates?

A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions(D) Obtaining uniform polymerisation products in highly exothermicreactions

Description : A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions (D) Obtaining uniform polymerisation products in highly exothermic reactions

Last Answer : (C) Liquid phase reactions

The purpose of providing expansion bellows in the shell of tubular exchanger is to (A) Increase the heating load (B) Impart structural strength(C) Account for the uneven expansion of shell and tube bundles(D) Facilitate increase of shell length, if needed

Description : The purpose of providing expansion bellows in the shell of tubular exchanger is to (A) Increase the heating load (B) Impart structural strength (C) Account for the uneven expansion of shell and tube bundles (D) Facilitate increase of shell length, if needed

Last Answer : (C) Account for the uneven expansion of shell and tube bundles

The space time is equivalent to the holding time in a steady state mixed reactor for (A) Non-isothermal gas reaction (B) Variable fluid density systems (C) Constant fluid density systems(D) Gas reactions with changing number of moles

Description : The space time is equivalent to the holding time in a steady state mixed reactor for (A) Non-isothermal gas reaction (B) Variable fluid density systems (C) Constant fluid density systems (D) Gas reactions with changing number of moles

Last Answer : (C) Constant fluid density systems

Pick out the wrong statement. (A) α-particle emission from a radioactive element makes it electrically negative (B) β-particle emission from a radioactive element makes it electrically positive (C) A radioactive element having a half life period of 20 years will completely disintegrated in 40 years (D) The disintegration constant of a radioactive isotope is independent of pressure, temperature or concentration

Description : Pick out the wrong statement. (A) α-particle emission from a radioactive element makes it electrically negative (B) β-particle emission from a radioactive element makes it electrically ... ) The disintegration constant of a radioactive isotope is independent of pressure, temperature or concentration

Last Answer : (C) A radioactive element having a half life period of 20 years will completely disintegrated in 40 years

Enzymes are destroyed, when the (A) Temperature is very high (B) Reactant's concentration is very high (C) Reactant's concentration is very low (D) Reaction rate is independent of the reactant's concentration

Description : Enzymes are destroyed, when the (A) Temperature is very high (B) Reactant's concentration is very high (C) Reactant's concentration is very low (D) Reaction rate is independent of the reactant's concentration

Last Answer : (A) Temperature is very high