A reactor is generally termed as an autoclave, when it is a (A) High pressure batch reactor (B) Atmospheric pressure tank reactor (C) High pressure tubular reactor (D) Atmospheric pressure CSTR(

A reactor is generally termed as an autoclave, when it is a
(A) High pressure batch reactor
(B) Atmospheric pressure tank reactor
(C) High pressure tubular reactor
(D) Atmospheric pressure CSTR
by

1 Answer

Answer :

A) High pressure batch reactor
by

Related questions

For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a single CSTR for high yield (B) Tubular reactor is preferred over a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Description : For reactions in parallel viz A → P (desired product) and A → Q (unwanted product), if the order of the desired reaction is higher than that of the undesired reaction, a (A) Batch reactor is preferred over a ... a single CSTR for high yield (C) Both (A) and (B) (D) Single CSTR is the most suitable

Last Answer : (C) Both (A) and (B)

The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Description : The use of space time is preferred over the mean residence time in the design of a/an (A) Batch reactor (B) Ideal tubular-flow reactor (C) Slurry reactor (D) CSTR

Last Answer : (B) Ideal tubular-flow reactor

Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Description : Which of the following is the most suitable for very high pressure gas phase reaction? (A) Batch reactor (B) Tubular flow reactor (C) Stirred tank reactor (D) Fluidised bed reactor

Last Answer : (B) Tubular flow reactor

For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Description : For nearly isothermal operation involving large reaction time in a liquid-phase reaction, the most suitable reactor is a __________ reactor. (A) Stirred tank (B) Tubular flow (C) Batch (D) Fixed bed

Last Answer : (A) Stirred tank

Space time equals the mean residence time (A) When the density of the reaction mixture is constant (B) For large diameter tubular reactor (C) For narrow diameter tubular reactor (D) For CSTR

Description : Space time equals the mean residence time (A) When the density of the reaction mixture is constant (B) For large diameter tubular reactor (C) For narrow diameter tubular reactor (D) For CSTR

Last Answer : (A) When the density of the reaction mixture is constant

Backmixing is most predominant in (A) A well stirred batch reactor (B) A plug-flow reactor (C) A single CSTR (D) CSTR's connected in series

Description : Backmixing is most predominant in (A) A well stirred batch reactor (B) A plug-flow reactor (C) A single CSTR (D) CSTR's connected in series

Last Answer : (C) A single CSTR

. In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same. (A) Semi-batch(B) Tubular(C) Batch(D) Back-mix

Description : . In case of a __________ reactor, the composition in the reactor and at the exit of the reactor is the same. (A) Semi-batch (B) Tubular (C) Batch (D) Back-mix

Last Answer : (D) Back-mix

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

For the same residence time, which one will give the maximum conversion? (A) Single stirred tank (v = 5 litres) (B) Two stirred tank (each of 2.5 litres) in series (C) Stirred tank followed by tubular flow reactor (each of 2.5 litres) (D) Single tubular flow reactor (v = 5 litres)

Description : For the same residence time, which one will give the maximum conversion? (A) Single stirred tank (v = 5 litres) (B) Two stirred tank (each of 2.5 litres) in series (C) Stirred tank followed by tubular flow reactor (each of 2.5 litres) (D) Single tubular flow reactor (v = 5 litres)

Last Answer : (D) Single tubular flow reactor (v = 5 litres)

A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Description : A stirred tank reactor compared to tubular-flow reactor provides (A) More uniform operating conditions (B) Permits operation at the optimum temperature for a long reaction time (C) Higher overall selectivity for a first order consecutive reaction (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Which of the following is an independent variable for a batch tank reactor with uniform concentration and temperature? (A) Time (B) Useful volume of the tank (C) Diameter of the reactor (D) None of these

Description : Which of the following is an independent variable for a batch tank reactor with uniform concentration and temperature? (A) Time (B) Useful volume of the tank (C) Diameter of the reactor (D) None of these

Last Answer : (A) Time

The most unsuitable reactor for carrying out reactions in which high reactant concentration favours high yields is (A) Backmix reactor (B) Plug flow reactor (C) Series of CSTR (D) PFR in series

Description : The most unsuitable reactor for carrying out reactions in which high reactant concentration favours high yields is (A) Backmix reactor (B) Plug flow reactor (C) Series of CSTR (D) PFR in series

Last Answer : A) Backmix reactor

A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield?(A) Large reactor followed by smaller one(B) Smaller reactor followed by larger one(C) Either of the arrangement (A) or (B) will give the same yield(D) Data insufficient, can't be predicted

Description : A first order reaction requires two unequal sized CSTR. Which of thefollowing gives higher yield? (A) Large reactor followed by smaller one (B) Smaller reactor followed by larger one (C) Either of the arrangement (A) or (B) will give the same yield (D) Data insufficient, can't be predicted

Last Answer : (C) Either of the arrangement (A) or (B) will give the same yield

Exothermic reactions are best carried out in (A) A CSTR (B) CSTR in series (C) A plug flow reactor followed by CSTR (D) CSTR followed by a plug flow reactor

Description : Exothermic reactions are best carried out in (A) A CSTR (B) CSTR in series (C) A plug flow reactor followed by CSTR (D) CSTR followed by a plug flow reactor

Last Answer : (D) CSTR followed by a plug flow reactor

Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Description : Recycling back of outlet stream to the reactor from an ideal CSTR carrying out a first order liquid phase reaction will result in __________ in conversion. (A) Decrease (B) Increase (C) No change (D) Either (A) or (B), depends on the type of reaction

Last Answer : (C) No change

For an autocatalytic reactor, the suitable reactor set up is(A) P.F. reactors in series (B) CSTR in series (C) CSTR followed by P.F. reactor (D) P.F. reactor followed by CSTR

Description : For an autocatalytic reactor, the suitable reactor set up is (A) P.F. reactors in series (B) CSTR in series (C) CSTR followed by P.F. reactor (D) P.F. reactor followed by CSTR

Last Answer : (C) CSTR followed by P.F. reactor

With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Description : With the same reaction time, initial concentration and feed rate, the reaction 2A → B is carried out separately in CSTR and P.F. reactor of equal volumes. The conversion will be (A) Higher in P.F. reactor (B) Higher in CSTR (C) Same in both the reactors (D) Data insufficient; can't be predicted

Last Answer : (A) Higher in P.F. reactor

For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Description : For series reaction, the relative yield (A) Is always greater for plug-flow reactor than for the single CSTR of the same volume (B) Statement in (A) is wrong (C) Decreases with increasing conversion (D) Both (A) and (C) hold good

Last Answer : (D) Both (A) and (C) hold good

For an ideal mixed flow reactor (CSTR), the exit age distribution E(t) is given by (A) A Dirac delta function (B) A step function (C) A ramp function (D) None of the above

Description : For an ideal mixed flow reactor (CSTR), the exit age distribution E(t) is given by (A) A Dirac delta function (B) A step function (C) A ramp function (D) None of the above

Last Answer : (D) None of the above

Autocatalytic reactions are best carried out in a (A) CSTR (B) CSTR in series (C) Plug flow reactor (D) Recycle reactor

Description : Autocatalytic reactions are best carried out in a (A) CSTR (B) CSTR in series (C) Plug flow reactor (D) Recycle reactor

Last Answer : (D) Recycle reactor

The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Description : The preferred reacting system for oxidation of o-xylene to phthalic anhydride is (A) Jacketed liquid phase CSTR (B) Jacketed steam heated multitubular reactor (C) Multitubular reactor with cooling (D) Multistage multitubular reactor with interstage cooling

Last Answer : (A) Jacketed liquid phase CSTR

The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Description : The conversion for a first order liquid phase reaction. A → B in a CSTRis 50%. If another CSTR of the same volume is connected in series, then the % conversion at the exit of the second reactor will be (A) 60 (B) 75 (C) 90 (D) 100

Last Answer : (B) 75

__________ Centrifuge is normally used in sugar mills. (A) Tubular bowl (B) Disc-bowl (C) Suspended batch basket (D) Perforated horizontal basket continuous

Description : __________ Centrifuge is normally used in sugar mills. (A) Tubular bowl (B) Disc-bowl (C) Suspended batch basket (D) Perforated horizontal basket continuous

Last Answer : (C) Suspended batch basket

__________ centrifuge is the most suitable for separation of non-friable crystals. (A) Tubular bowl (B) Disc-bowl (C) Perforated horizontal basket continuous (D) Suspended batch baske

Description : __________ centrifuge is the most suitable for separation of non-friable crystals. (A) Tubular bowl (B) Disc-bowl (C) Perforated horizontal basket continuous (D) Suspended batch baske

Last Answer : (C) Perforated horizontal basket continuous

Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, one reactant is charged batch wise, while the other reactant is fed continuously (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Description : Pick out the wrong statement. (A) In a batch reactor, which is exclusively used for liquid phase reactions; temperature pressure and composition may vary with time (B) In a semi-batch reactor, ... system (D) In a continuous flow reactor, both the reactants and the products flow out continuously

Last Answer : (C) In a continuous flow reactor, uniform concentration cannot be maintained throughout the vessel even in a well agitated system

Which of the following fixes the volume of a batch reactor for a particular conversion and production rate? (A) Operating conditions (e.g. pressure and temperature) (B) Rate constant (C) Density of mixture (D) None of these

Description : Which of the following fixes the volume of a batch reactor for a particular conversion and production rate? (A) Operating conditions (e.g. pressure and temperature) (B) Rate constant (C) Density of mixture (D) None of these

Last Answer : (C) Density of mixture

The composition of fresh feed to the high temperature, high pressure urea autoclave is (A) Excess liquid ammonia and liquefied CO2 (B) Excess liquid ammonia and compressed CO2 gas (C) Liquid ammonia and excess compressed CO2 (D) Compressed ammonia gas and excess compressed CO2

Description : The composition of fresh feed to the high temperature, high pressure urea autoclave is (A) Excess liquid ammonia and liquefied CO2 (B) Excess liquid ammonia and compressed CO2 gas (C) Liquid ammonia and excess compressed CO2 (D) Compressed ammonia gas and excess compressed CO2

Last Answer : (B) Excess liquid ammonia and compressed CO2 gas

. A batch reactor suffers from following disadvantage. (A) Poor product quality control (B) High labour and handling cost (C) High shutdown time requirement for emptying, cleaning and refilling (D) All (A), (B) and (C)

Description : . A batch reactor suffers from following disadvantage. (A) Poor product quality control (B) High labour and handling cost (C) High shutdown time requirement for emptying, cleaning and refilling (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Description : An isothermal irreversible reaction is being carried out in an ideal tubular flow reactor. The conversion in this case will __________ with decrease in space time. (A) Increase (B) Increase exponentially (C) Decrease (D) Remain unchanged

Last Answer : (C) Decrease

In an ideal tubular-flow reactor (A) There is no mixing in longitudinal direction (B) Mixing takes place in radial direction (C) There is a uniform velocity across the radius (D) All (A), (B) and (C)

Description : In an ideal tubular-flow reactor (A) There is no mixing in longitudinal direction (B) Mixing takes place in radial direction (C) There is a uniform velocity across the radius (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

The energy balance equation over a tubular reactor under transient conditions is (A) An ordinary non-linear differential equation (B) An algebraic differential equation (C) A linear partial differential equation(D) A non-linear partial differential equation

Description : The energy balance equation over a tubular reactor under transient conditions is (A) An ordinary non-linear differential equation (B) An algebraic differential equation (C) A linear partial differential equation (D) A non-linear partial differential equation

Last Answer : (C) A linear partial differential equation

Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a measure of its capacity and is equal to the residence time when the density of reaction mixture is constant (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty (D) In an ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Description : Pick out the wrong statement. (A) The vessel dispersion number (D/UL) for plug flow and mixed flow approaches zero and infinity respectively (B) Space time in a flow reactor is a ... ideal tubular flow reactor, mixing takes place in radial direction and there is no mixing in longitudinal direction

Last Answer : (C) Mixed reactor is always smaller than the plug flow reactor for all positive reaction orders for a particular duty

For a tubular flow reactor with uniform concentration and temperature, the independent variable is (A) Time (B) Length (C) Diameter (D) None of these

Description : For a tubular flow reactor with uniform concentration and temperature, the independent variable is (A) Time (B) Length (C) Diameter (D) None of these

Last Answer : (B) Length

Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Description : Space velocity (A) Describes the extensive operating characteristics of a tubular flow reactor (B) Is the maximum feed rate per unit volume of reactor for a given conversion (C) Is a measure of the ease of the reaction (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Description : Temperature and pressure in urea autoclave is (A) 120°C and 300 atm (B) 190°C and 200 atm (C) 400°C and 550 atm (D) 200°C and 10 atm

Last Answer : (B) 190°C and 200 atm

Bottom product of atmospheric pressure crude oil distillation column is termed as (A) Reduced crude (B) Heavy ends (C) Asphalt (D) Residuum

Description : Bottom product of atmospheric pressure crude oil distillation column is termed as (A) Reduced crude (B) Heavy ends (C) Asphalt (D) Residuum

Last Answer : (A) Reduced crude

Which of the following is the most suitable for isothermal operation? (A) Batch reactor (B) Back-mix reactor (C) Plug-flow reactor (D) Fixed bed reactor

Description : Which of the following is the most suitable for isothermal operation? (A) Batch reactor (B) Back-mix reactor (C) Plug-flow reactor (D) Fixed bed reactor

Last Answer : (B) Back-mix reactor

A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions(D) Obtaining uniform polymerisation products in highly exothermicreactions

Description : A batch reactor is suitable for (A) Achieving cent percent conversion of reactants into products (B) Large scale gaseous phase reactions (C) Liquid phase reactions (D) Obtaining uniform polymerisation products in highly exothermic reactions

Last Answer : (C) Liquid phase reactions

A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Description : A batch reactor is (A) Suitable for gas-phase reactions on commercial scale (B) Suitable for liquid phase reactions involving small production rate (C) Least expensive to operate for a given rate (D) Most suitable for very large production rate

Last Answer : (B) Suitable for liquid phase reactions involving small production rate

In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Description : In a semi-batch reactor, (A) Mixing takes place in axial direction only (B) Velocity of reaction can be controlled (C) Condition similar to plug flow reactor exists (D) Residence time is constant

Last Answer : (B) Velocity of reaction can be controlled

A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal to 50J/mole.K. The temperature rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Description : A batch adiabatic reactor at an initial temperature of 373°K is being used for the reaction, A → B. Assume the heat of reaction is - 1kJ/mole at 373°K and heat capacity of both A and B to be constant and equal ... rise after a conversion of 0.5 will be: (A) 5°C (B) 10°C (C) 20°C (D) 100°C

Last Answer : (B) 10°C

A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed (C) Cent per cent conversion can be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Description : A space velocity of 5 hr -1 means that (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour (B) After every 5 hours, reactor is being filled with the feed ... be achieved in at least 5 hours (D) A fixed conversion of a given batch of feed takes 5 hours

Last Answer : (A) Five reactor volumes of feed (at specified conditions) are being fed into the reactor per hour

In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Description : In a semi-batch reactor (A) Velocity of reaction can be controlled (B) Maximum conversion can be controlled (C) Both the reactants flow counter-currently (D) Residence time is constant

Last Answer : (A) Velocity of reaction can be controlled

Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally by stimulus￾response technique (C) For studying a chemical reaction, it is desirable to monitor the reactants during initial stages and the products during the final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Description : Pick out the wrong statement. (A) 'Hold back' is defined as the fraction of material that stays longer than the mean residence time (B) Study of non-ideal flow reactor is done experimentally ... final stages of reaction (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Last Answer : (D) A batch reactor cannot be used to study the kinetics of catalytic reaction

Time required for 50% decomposition of a liquid in an isothermal batch reactor following first order kinetics is 2 minutes. The time required for 75% decomposition will be about __________ minutes. (A) 3 (B) 4 (C) 6 (D) 10

Description : Time required for 50% decomposition of a liquid in an isothermal batch reactor following first order kinetics is 2 minutes. The time required for 75% decomposition will be about __________ minutes. (A) 3 (B) 4 (C) 6 (D) 10

Last Answer : (B) 4

Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Description : Oil is hydrogenated using nickel catalyst in a __________ reactor. (A) Batch (B) Slurry (C) Fluidised bed (D) Fixed bed

Last Answer : (B) Slurry

Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Description : Kinetics of a solid catalysed reaction can best be studied in a __________ reactor. (A) Batch (B) Plug-flow (C) Mixed (D) None of these

Last Answer : (C) Mixed

The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Description : The reaction A → B is conducted in an isothermal batch reactor. If the conversion of A increases linearly with holding time, then the order of the reaction is (A) 0 (B) 1 (C) 1.5 (D) 2

Last Answer : (A) 0