Which is a catalyst promoter used in catalytic ammonia synthesis reaction? (A) Al2O3 (B) Cr2O3 (C) K2O (D) MnO

Which is a catalyst promoter used in catalytic ammonia synthesis
reaction?
(A) Al2O3
(B) Cr2O3
(C) K2O
(D) MnO
by

1 Answer

Answer :

(C) K2O
by

Related questions

Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Description : Catalyst used in ammonia synthesis uses __________ as a promoter. (A) Pt (B) K2O (C) Al2O3 (D) Ni

Last Answer : (B) K2O

Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to iron catalyst in ammonia synthesis reaction (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Description : Pick out the wrong statement. (A) Use of different catalysts in a reversible catalytic chemical reaction does not change the equilibrium composition (B) Alumina is added as a promoter to ... Arrhenius plot (D) Presence of inerts affects the equilibrium conversion of reactants in a chemical reaction

Last Answer : (C) Activation energy for a reaction is obtained from the intercept of the Arrhenius plot

Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Description : Promoter used in NH3 synthesis catalyst is (A) K2O (B) SiO3 (C) V2O5 (D) U2O3

Last Answer : (C) V2O5

The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Description : The main constituents of glass is (A) SiO2 (B) B2O3 (C) Al2O3 (D) Cr2O3

Last Answer : (A) SiO2

Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in __________ of the catalyst. (A) Stabilisation (B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Description : Use of catalyst is a must in the ammonia manufacture, because the reaction is reversible as well as the heat of dissociation of N2 & H2 is high. The presence of promoter along with the catalyst helps in ... B) Increasing the effectiveness (C) Improving the strength & heat resistance (D) All a, b & c

Last Answer : (D) All a, b & c

Cement mainly contains (A) CaO, SiO2 , Al2O3 (B) MgO, SiO2 , K2O (C) Al2O3 , MgO, Fe2O3 (D) CaO, MgO, K2O

Description : Cement mainly contains (A) CaO, SiO2 , Al2O3 (B) MgO, SiO2 , K2O (C) Al2O3 , MgO, Fe2O3 (D) CaO, MgO, K2O

Last Answer : (A) CaO, SiO2 , Al2O3

Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (B) (i) - Fe/Al2O3 ; (ii) - Cu - ZnO/Al2O3 (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Description : Consider the production of ammonia from methene and air as raw materials. The catalysts used are: (i) __________ for steam reforming of methane and (ii) __________ for ammonia synthesis. (A) (i) - Ni/Al2O3 ; (ii) - Cu - ZnO/ ... (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3 (D) (i) - Fe/Al2O3 ; (ii) - Ni/Al2O3

Last Answer : (C) (i) - Ni/Al2O3 ; (ii) - Fe/Al2O3

Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Description : Catalyst used in the manufacture of sulphuric acid by chamber & contact processes are respectively (A) V2O5 & Cr2O3 . (B) Oxides of nitrogen & Cr2O3 (C) V2O5 on a porous carrier & oxides of nitrogen (D) Oxides of nitrogen & V2O5 on a porous carrier

Last Answer : (D) Oxides of nitrogen & V2O5 on a porous carrier

Catalytic ammonia synthesis reaction as in Haber's process is (A) Endothermic (B) Exothermic (C) Irreversible (D) None of these

Description : Catalytic ammonia synthesis reaction as in Haber's process is (A) Endothermic (B) Exothermic (C) Irreversible (D) None of these

Last Answer : (B) Exothermic

During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Description : During nitric acid manufacture, catalytic oxidation of ammonia at 800°C in presence of platinum catalyst produces nitrogen oxide. Conversion of NH3 to NO is about __________ percent. (A) 38 (B) 68 (C) 82 (D) 98

Last Answer : (D) 98

Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure vessel used for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Description : Multistage operation (as in the case of catalytic oxidation of SO2 ) is not carried out for NH3 synthesis, because of (A) Comparatively higher pressure drop (B) High cost of the high pressure ... for the reactor (C) Higher pumping cost (D) Chances of entrainment and disturbance of catalyst bed

Last Answer : (B) High cost of the high pressure vessel used for the reactor

Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Description : Steam reforming of naphtha produces ammonia synthesis gas. This is a/an __________ process. (A) Autocatalytic (B) Endothermic (C) Exothermic (D) Non-catalytic

Last Answer : (B) Endothermic

From among the following, choose one which is not an exothermic process. (A) Methanol synthesis (B) Catalytic cracking (C) Ammonia synthesis (D) Oxidation of sulphu

Description : From among the following, choose one which is not an exothermic process. (A) Methanol synthesis (B) Catalytic cracking (C) Ammonia synthesis (D) Oxidation of sulphu

Last Answer : (B) Catalytic cracking

Promoter (A) Initiates a chemical reaction and is a catalyst by itself (B) Alters the position of equilibrium in a reversible reaction (C) Increases the number of active centres by increasing the unevenness of catalyst surface and by creating discontinuities in the crystals(D) All (A), (B) and (C)

Description : Promoter (A) Initiates a chemical reaction and is a catalyst by itself (B) Alters the position of equilibrium in a reversible reaction (C) Increases the number of active centres by increasing the unevenness of catalyst surface and by creating discontinuities in the crystals (D) All (A), (B) and (C)

Last Answer : (C) Increases the number of active centres by increasing the unevenness of catalyst surface and by creating discontinuities in the crystals

Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3

Description : Which catalyst is used in the manufacture of ethylene oxide by oxidation of ethylene? (A) AgO (B) Al2O3 (C) ZnCl2 (D) Fe2O3

Last Answer : (A) AgO

Fat splitting catalyst is(A) CaCO3(B) ZnO(C) Al2O3(D) Fe

Description : Fat splitting catalyst is (A) CaCO3 (B) ZnO (C) Al2O3 (D) Fe

Last Answer : (B) ZnO

Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Description : Manufacture of phthalic anhydride uses __________ as a catalyst. (A) Ni (B) Cr (C) V2O5 (D) Al2O3

Last Answer : (C) V2O5

In __________ converter for ammonia synthesis, the catalyst is arranged in the form of a single continuous bed. (A) Fauser-Montecatini (B) Claude (C) Uhde(D) Kellogg

Description : In __________ converter for ammonia synthesis, the catalyst is arranged in the form of a single continuous bed. (A) Fauser-Montecatini (B) Claude (C) Uhde (D) Kellogg

Last Answer : (B) Claude

Iron is not used alone as a catalyst in ammonia synthesis, because (A) Its activity declines rapidly, if heated to above 520°C (B) It decomposes ammonia (C) It gets oxidised above 500°C (D) None of these

Description : Iron is not used alone as a catalyst in ammonia synthesis, because (A) Its activity declines rapidly, if heated to above 520°C (B) It decomposes ammonia (C) It gets oxidised above 500°C (D) None of these

Last Answer : (A) Its activity declines rapidly, if heated to above 520°C

In Haber process of production of ammonia K2O is used as :

Description : In Haber process of production of ammonia K2O is used as :

Last Answer : In Haber process of production of ammonia K2O is used as : a. catalyst b. inhibitor c. promotor d. adsorbate

Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming process (C) The most ideal feedstock for thermal reforming is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Description : Pick out the wrong statement. (A) Lower boiling paraffins have higher octane number than higher paraffins (B) Dehydrogenation of naphthenes to aromatics is a desirable reaction in reforming ... is dearomatised kerosene (D) Catalyst used in catalytic reforming is platinum on silica-alumina base

Last Answer : (C) The most ideal feedstock for thermal reforming is dearomatised kerosene

A reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Catalytic (B) Autocatalytic (C) Photochemical

Description : A reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Catalytic (B) Autocatalytic (C) Photochemical

Last Answer : (C) Photochemical

For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst can cause the conversion of large amount of reactants which does not mean that catalyst concentration is important (C) The catalyst does not form an intermediate complex with the reactant (D) The surface of the catalyst does not play an important role during reaction

Description : For a heterogeneous catalytic reaction (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction (B) A relatively small amount of catalyst ... with the reactant (D) The surface of the catalyst does not play an important role during reaction

Last Answer : (A) Free energy of activation is lowered in the presence of catalyst, which remains unchanged at the end of reaction

Catalytic action in a catalytic chemical reaction follows from the ability of catalyst to change the (A) Activation energy (B) Equilibrium constant (C) Heat of reaction (D) None of these

Description : Catalytic action in a catalytic chemical reaction follows from the ability of catalyst to change the (A) Activation energy (B) Equilibrium constant (C) Heat of reaction (D) None of these

Last Answer : (A) Activation energy

Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of the reacting molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Description : Pick out the correct statement. (A) In catalytic reactions, the catalyst reacts with the reactants (B) A catalyst initiates a chemical reaction (C) A catalyst lowers the activation energy of ... molecules (D) A catalyst cannot be recovered chemically unchanged at the end of the chemical reaction

Last Answer : (C) A catalyst lowers the activation energy of the reacting molecules

The reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Biochemical (B) Photochemical (C) Catalytic (D) Autocatalytic

Description : The reaction in which one of the products of reaction acts as a catalyst is called a/an __________ reaction. (A) Biochemical (B) Photochemical (C) Catalytic (D) Autocatalytic

Last Answer : (D) Autocatalytic

Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of catalyst, if it doesnot entail a chain mechanism.(A) Proportional to(B) Independent of(C) Inversely proportional to(D) Proportional to the square o

Description : Overall rate of reaction in a heterogeneous catalytic reaction depends upon the mass and energy transfer from the fluid to solid surface and its rate of reaction is usually __________ the concentration of ... to (B) Independent of (C) Inversely proportional to (D) Proportional to the square o

Last Answer : (A) Proportional to

The equilibrium constant of a catalytic chemical reaction __________ due to the presence of a catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable from the data

Description : The equilibrium constant of a catalytic chemical reaction __________ due to the presence of a catalyst. (A) Increases (B) Decreases (C) Remain unaffected (D) Unpredictable from the data

Last Answer : (C) Remain unaffected

Which of the following agents is used in order to make benzene react with bromine to give bromobenzene? (a) Ultraviolet light (b) Fe catalyst (c) Nickel catalyst (d) Al2O3 catalyst

Description : Which of the following agents is used in order to make benzene react with bromine to give bromobenzene? (a) Ultraviolet light (b) Fe catalyst (c) Nickel catalyst (d) Al2O3 catalyst

Last Answer : Fe catalyst

Which of the following agents is used in order to make benzene react with acetyl chloride to give acetophenone?(a) Ultraviolet light (b) AlCl3 catalyst (c) Platinum catalyst (d) Al2O3 catalyst

Description : Which of the following agents is used in order to make benzene react with acetyl chloride to give acetophenone? (a) Ultraviolet light (b) AlCl3 catalyst (c) Platinum catalyst (d) Al2O3 catalyst

Last Answer : AlCl3 catalyst

Neutralisation of nitric acid with ammonia to produce ammonium nitrate is a/an __________ reaction. (A) Catalytic (B) Endothermic (C) Exothermic (D) Autocatalytic

Description : Neutralisation of nitric acid with ammonia to produce ammonium nitrate is a/an __________ reaction. (A) Catalytic (B) Endothermic (C) Exothermic (D) Autocatalytic

Last Answer : (C) Exothermic

A catalyst promoter (A) Improves the activity of a catalyst (B) Acts as a catalyst support (C) Itself has very high activity (D) All (A), (B) and (C)

Description : A catalyst promoter (A) Improves the activity of a catalyst (B) Acts as a catalyst support (C) Itself has very high activity (D) All (A), (B) and (C)

Last Answer : (A) Improves the activity of a catalyst

Promoter is added to the catalyst to improve its (A) Porosity (B) Sensitivity (C) Surface area (D) None of these

Description : Promoter is added to the catalyst to improve its (A) Porosity (B) Sensitivity (C) Surface area (D) None of these

Last Answer : (B) Sensitivity

Two half-reactions of an electrochemical cell are given below : MnO–4 (aq) + 8H+ (aq) + 5e– → Mn2+ (aq) + 4H2O (I), E° = 1.51 V Sn2+ (aq) → Sn4+ (aq) + 2e–, E° = + 0.15 V. Construct the redox equation from the standard potential of the cell and predict if the reaction is reactant favoured or product favoured. -Chemistry

Description : Two half-reactions of an electrochemical cell are given below : MnO-4 (aq) + 8H+ (aq) + 5e- → Mn2+ (aq) + 4H2O (I), E° = 1.51 V Sn2+ (aq) → Sn4+ (aq) + 2e- ... the redox equation from the standard potential of the cell and predict if the reaction is reactant favoured or product favoured. -Chemistry

Last Answer : The reactions can be represented at anode and at cathode in the following ways : At anode (oxidation) : Sn2+ → = Sn4+ (aq) + 2e- ] 5 E° = + 0.15 V At cathode (reduction) : MnO-4(aq) + 8H+ ... = E°cathode - E°anode = 1.51 - 0.15 = + 1.36 V ∴ Positive value of E°cell favours formation of product.

Two half-reactions of an electrochemical cell are given below : MnO–4 (aq) + 8H+ (aq) + 5e– → Mn2+ (aq) + 4H2O (I), E° = 1.51 V Sn2+ (aq) → Sn4+ (aq) + 2e–, E° = + 0.15 V. Construct the redox reaction equation from the two half-reactions and calculate the cell potential from the standard potentials and predict if the reaction is reactant or product favoured. -Chemistry

Description : Two half-reactions of an electrochemical cell are given below : MnO-4 (aq) + 8H+ (aq) + 5e- → Mn2+ (aq) + 4H2O (I), E° = 1.51 V Sn2+ (aq) → Sn4+ (aq) + ... -reactions and calculate the cell potential from the standard potentials and predict if the reaction is reactant or product favoured. -Chemistry

Last Answer : The reactions can be represented at anode and at cathode in the following ways : At anode (oxidation) : Sn2+ → Sn4+ (aq) + 2e- ] 5 E° = + 0.15 V Af cathode (reduction) : MnO-4(aq) + 8H+ ( ... = E°cathode - E°anode = 1.51 - 0.15 = + 1.36 V ∴ Positive value of E°cell favours formation of product.

Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Description : Nickel is not used as a catalyst in the __________ reaction. (A) Shift conversion (B) Oil hydrogenation (C) Steaming reforming of naphtha (D) Ammonia cracking/dissociation

Last Answer : (A) Shift conversion

Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) NH3 synthesis reaction

A substance which increases the efficiency of a catalyst is termed as: A. Promoter (Answer) B. Activator C. Retarder D. Super catalyst

Description : A substance which increases the efficiency of a catalyst is termed as: A. Promoter (Answer) B. Activator C. Retarder D. Super catalyst

Last Answer : A. Promoter (Answer)

Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay(D) All (A), (B) & (C)

Description : Catalytic desulphurisation process used for sweetening of straight run gasoline and kerosene uses __________ as catalyst. (A) Bauxite (B) Fuller’s earth (C) Activated clay (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

. Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Description : . Which of the following is used as a catalyst in fluidised bed catalytic cracking? (A) Silica-magnesia (B) Silica-alumina (C) Bentonite clays (D) All (A), (B) and (C

Last Answer : (D) All (A), (B) and (C

Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Description : Catalyst used in the catalytic cracking is (A) Silica-alumina (B) Silica gel (C) Vanadium pentoxide (D) Nickel

Last Answer : (A) Silica-alumina

Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Description : Catalyst used in catalytic reforming is (A) Platinum on alumina (B) Nickel (C) Iron (D) Aluminium chloride

Last Answer : (A) Platinum on alumina

Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Description : Catalyst used in the catalytic polymerisation is (A) Phosphoric acid on kieselguhr (B) Aluminium chloride (C) Nickel (D) Vanadium pentoxide

Last Answer : (A) Phosphoric acid on kieselguhr

Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given conversion (C) Percentage conversion increases with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Description : Pick out the correct statement pertaining to catalytic cracking. (A) With increase in the reactor pressure, octane number of gasoline decreases (B) With increase in the reactor temperature, gasoline yield decreases for a given ... with increase in the catalyst to oil ratio (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Catalyst used in catalytic polymerisation which produces polymergasoline is(A) H2SO4(B) H3PO4(C) Both (A) and (B)(D) AlCl3

Description : Catalyst used in catalytic polymerisation which produces polymergasoline is (A) H2SO4 (B) H3PO4 (C) Both (A) and (B) (D) AlCl3

Last Answer : (C) Both (A) and (B)

Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first compartment (C) Oxidation of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Description : Automobile exhaust is passed through two compartments catalytic converter employing platinum as catalyst for (A) Conversion of CO into CO2 in the second compartment (B) Conversion of NOx into N2 and NH3 in the first ... of unburnt hydrocarbon fuel in the second compartment (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Description : A catalyst loses its activity due to (A) Loss in surface area of the active component (B) Agglomeration of metal particles caused by thermal sintering of the solid surface (C) Covering of the catalytic active sites by a foreign substance (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

. Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Description : . Catalyst used in the catalytic converter employed in automobiles to convert CO into CO2 and for complete oxidation of un-burnt hydrocarbons is (A) Nickel (B) Cobalt (C) Vanadium (D) Platinum

Last Answer : (D) Platinum

Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Description : Catalyst used in the 'catalytic converter' employed in automobile exhaust line for complete combustion/oxidation of carbon monoxide, nitrogen oxides and hydrocarbons is (A) Alumina (B) Platinum (C) Vanadium pentoxide (D) Iron oxide

Last Answer : Option B

The industrial process of producing ammonia by the reaction of nitrogen with hydrogen in the presence of catalyst is called?

Description : The industrial process of producing ammonia by the reaction of nitrogen with hydrogen in the presence of catalyst is called?

Last Answer : Haber process