A relief valve (A) Provides back pressure for a cylinder (B) Unloads a pump (C) Is a directional control valve (D) None of these

A relief valve
(A) Provides back pressure for a cylinder
(B) Unloads a pump
(C) Is a directional control valve
(D) None of these
by

1 Answer

Answer :

(C) Is a directional control valve
by

Related questions

Foot valve provided in the pump is a __________ valve. (A) Direction control (B) Back pressure (C) Relief (D) Pressure reduction

Description : Foot valve provided in the pump is a __________ valve. (A) Direction control (B) Back pressure (C) Relief (D) Pressure reduction

Last Answer : (B) Back pressure

Purpose of relief valve in a reciprocating pump is to (A) Protect the pump against developing excessive pressure (B) Facilitate unidirectional flow of liquid (C) Reduce the discharge pressure (D) Control the rate of discharge

Description : Purpose of relief valve in a reciprocating pump is to (A) Protect the pump against developing excessive pressure (B) Facilitate unidirectional flow of liquid (C) Reduce the discharge pressure (D) Control the rate of discharge

Last Answer : (A) Protect the pump against developing excessive pressure

A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Description : A hydraulic accumulator comprises of (A) A storage device and a control valve (B) A cylinder and a plunger (C) Two pistons and two cylinders (D) A storage tank and a ram pump

Last Answer : (B) A cylinder and a plunger

A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Description : A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Last Answer : c. Automatically switched to a more appropriate source of hydraulic supply

A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Description : A shuttle valve will: a. Allow the accumulator to be emptied after engine shut down b. Reduce pump loading when normal system pressure is reached c. Automatically switched to a more appropriate source of hydraulic supply d. Operate on a rising pressure, higher than the Full Flow relief valve

Last Answer : c. Automatically switched to a more appropriate source of hydraulic supply

Foot valves provided in pumps are __________ valves. (A) Relief (B) Three/four way (C) Pressure reducing (D) Directional contro

Description : Foot valves provided in pumps are __________ valves. (A) Relief (B) Three/four way (C) Pressure reducing (D) Directional contro

Last Answer : (D) Directional control

Device to control the pressure of fluid and gases within range of settings. a. Relief valve. c. Filter b. Spray gun. d. Pressure regulator

Description : Device to control the pressure of fluid and gases within range of settings. a. Relief valve. c. Filter b. Spray gun. d. Pressure regulator

Last Answer : Pressure regulator

What is function of Oil reservoir,Pressure relief valve, Direction control valve and filters in Hydraulic system.

Description : What is function of Oil reservoir,Pressure relief valve,  Direction control valve and filters in Hydraulic system.

Last Answer : (i) Oil Reservoir - To store the Hydraulic oil for the circuit (ii) Pressure Relief Valve- To release the extra pressure whenever not required by system (iii) Direction Control Valve- To ... (iv) Filters- To filter the foreign particle from the oil and to separates submicron level contamination

Check valve provided in the discharge line of a centrifugal pump serves the purpose of controlling the (A) Back flow of fluid in the event of stoppage of pump (B) Discharge pressure (C) Flow of liquid during operation of the pump (D) All (A), (B) and (C)

Description : Check valve provided in the discharge line of a centrifugal pump serves the purpose of controlling the (A) Back flow of fluid in the event of stoppage of pump (B) Discharge pressure (C) Flow of liquid during operation of the pump (D) All (A), (B) and (C)

Last Answer : (A) Back flow of fluid in the event of stoppage of pump

The sewer that unloads the sewage at the point of treatment is called A. Main sewer B. Outfall sewer C. Branch sewer D. House sewer

Description : The sewer that unloads the sewage at the point of treatment is called A. Main sewer B. Outfall sewer C. Branch sewer D. House sewer

Last Answer : ANS: B

If the compressor of 200 cfm loads in 10 seconds and unloads in 20 seconds, the air leakage would be_____ a) 67 cfm b) 100 cfm c) 10 cfm d) 133 cfm

Description : If the compressor of 200 cfm loads in 10 seconds and unloads in 20 seconds, the air leakage would be_____ a) 67 cfm b) 100 cfm c) 10 cfm d) 133 cfm 

Last Answer : a) 67 cfm

For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Description : For a reciprocating pump, the indicator diagram is the graph between the (A) Discharge and overall efficiency (B) Volume swept by piston for one complete revolution and the pressure in the cylinder (C) Angle swept by the crank pin at any instant and the discharge (D) None of these

Last Answer : (B) Volume swept by piston for one complete revolution and the pressure in the cylinder

When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Description : When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Last Answer : d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Description : When does the engine High Pressure fuel shut off valve close? a. After a booster pump failure b. When the engine fuel switch is selected ‘ON’ during engine start c. When flight idle is selected d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

Last Answer : d. When the engine fuel switch is selected ‘OFF’ during engine shut-down

What causes a water heaters relief valve to discharge water?

Description : What causes a water heaters relief valve to discharge water?

Last Answer : The relief valves are installed on every water heater for your safety. If the tank builds up too much pressure inside it can explode. The relief valve is there to relieve the pressure in the ... the tank exceeds this limit the pressure valve is activated and will relieve the pressure in the tank.

Do all propane tanks have a relief valve?

Description : Do all propane tanks have a relief valve?

Last Answer : Propane tanks are required to have a safety relief valve. The relief valve is a safety device on the propane tank to vent excess pressure.

Do I need threaded or flanged type of vacuum relief valve?

Description : Do I need threaded or flanged type of vacuum relief valve?

Last Answer : You should take your current one off and see what type you have. If you can't take it off, then you should go down to your local parts store and ask them which one your vehicle takes. They have a huge database that typically lists all of the different parts that are needed.

The moisture in a refrigerant is removed by (a) evaporator (b) safety relief valve (c) dehumidifier (d) driers

Description : The moisture in a refrigerant is removed by (a) evaporator (b) safety relief valve (c) dehumidifier (d) driers

Last Answer : Ans: d

What is relief valve?

Description : What is relief valve?

Last Answer : Answer: Valve to relieve excess pressure in liquids in situations where full flow discharge is not required, when release of small volume of liquid would rapidly lower pressure.

Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Description : Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Last Answer : Filter

Why is there a relief valve on a turbine casing?

Description : Why is there a relief valve on a turbine casing?

Last Answer : The turbine casing is fitted with spring-loaded relief valves to prevent damage by excessive steam pressure at the low-pressure end if the exhaust valve is closed accidentally. Some casings on smaller ... -pressure of the exhaust end. A spring-loaded relic valve is needed to relieve high pressure.

A relief valve

Description : A relief valve

Last Answer : C. Relieves at a designed pressure

While starting a centrifugal pump, its delivery valve should be kept (A) Opened (B) Closed (C) Either opened or closed; it does not make any difference (D) Either opened or closed; depending on the fluid viscosity

Description : While starting a centrifugal pump, its delivery valve should be kept (A) Opened (B) Closed (C) Either opened or closed; it does not make any difference (D) Either opened or closed; depending on the fluid viscosity

Last Answer : (B) Closed

Gear pump (A) Is a positive displacement pump (B) Is a centrifugal pump (C) Is a non-positive displacement pump (D) Can be started with delivery valve closed

Description : Gear pump (A) Is a positive displacement pump (B) Is a centrifugal pump (C) Is a non-positive displacement pump (D) Can be started with delivery valve closed

Last Answer : (A) Is a positive displacement pump

Check in a centrifugal pump is (A) Provided in the discharge line (B) Generally a globe valve (C) Provided to prevent liquid from backing up through the pump when the pump is turned off or accidently stops running (D) All (A), (B) and (C)

Description : Check in a centrifugal pump is (A) Provided in the discharge line (B) Generally a globe valve (C) Provided to prevent liquid from backing up through the pump when the pump is turned off or accidently stops running (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

While starting an axial flow pump, its delivery valve should be kept (A) Open (B) Closed (C) Either open or closed (D) None of these

Description : While starting an axial flow pump, its delivery valve should be kept (A) Open (B) Closed (C) Either open or closed (D) None of these

Last Answer : (A) Open

Erosion and pits formation on the impeller of a centrifugal pump may be due to (A) Cavitation (B) Low speed of impeller (C) Its operation with delivery valve closed for considerable time after starting the pump (D) Off centering of pump with motor

Description : Erosion and pits formation on the impeller of a centrifugal pump may be due to (A) Cavitation (B) Low speed of impeller (C) Its operation with delivery valve closed for considerable time after starting the pump (D) Off centering of pump with motor

Last Answer : (A) Cavitation

The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Description : The vent valve provided in a liquid handling centrifugal pump is (A) Generally a needle valve (B) Used to release any gases that might be vapour locking the pump (C) Helpful in easy removal of samples (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following is a boiler accessory i.e., not a boiler mounting? (A) Blow off cock (B) Feed check valve (C) Feed water pump (D) Stop valve

Description : Which of the following is a boiler accessory i.e., not a boiler mounting? (A) Blow off cock (B) Feed check valve (C) Feed water pump (D) Stop valve

Last Answer : (C) Feed water pump

An engine is called I or valve in head engine when a) Valve are immediately above the cylinder b) Both valves are on one side c) Both valves are on opposite direction d) None of the above

Description : An engine is called I or valve in head engine when a) Valve are immediately above the cylinder b) Both valves are on one side c) Both valves are on opposite direction d) None of the above

Last Answer : d) None of the above

The fastest symptomatic relief as well as highest healing rates in reflux esophagitis are obtained with: A. Prokinetic drugs B. H2 receptor blockers C. Proton pump inhibitors D. Sodium alginate

Description : The fastest symptomatic relief as well as highest healing rates in reflux esophagitis are obtained with: A. Prokinetic drugs B. H2 receptor blockers C. Proton pump inhibitors D. Sodium alginate

Last Answer : C. Proton pump inhibitors

Chapter 13 Bankruptcy Provides Relief to Debtors?

Description : Chapter 13 Bankruptcy Provides Relief to Debtors?

Last Answer : If you're overwhelmed by debt and have a steady job, filing for bankruptcy under Chapter 13 of the federal bankruptcy code might work for you.The federal government calls it the "wage earners" ... payments within 30 days of filing. When the debts have been paid, the bankruptcy can be discharged.

Which of these scenes in invention of love provides brief relief tot he overall mood of the story?

Description : Which of these scenes in invention of love provides brief relief tot he overall mood of the story?

Last Answer : When the man and woman laugh at the horse's sneeze

National Disaster Management Division of the Govt. of India wherever necessary, sends to disaster affected areas? a. Coordanation its containing satellite phones b. Medicines for affected people c. Provides relief measures d. All the above

Description : National Disaster Management Division of the Govt. of India wherever necessary, sends to disaster affected areas? a. Coordanation its containing satellite phones b. Medicines for affected people c. Provides relief measures d. All the above

Last Answer : d. All the above

Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed, the head developed is maximum which is known as shut-off head (C) At a particular speed the discharge at which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Description : Pick up the correct statement from the following: (A) At a particular speed of operation, the head produced decreases with the increase of discharge (B) At zero discharge, discharge valve remaining closed ... which efficiency of a pump is maximum, is known as normal discharge (D) All the above

Last Answer : (D) All the above

In centrifugal pump installation, (A) Pump is properly primed before starting (B) The diameter of the pipe at inlet as well as at outlet, is kept smaller than the delivery pipe (C) The motor may burn out if it is started with empty delivery pipe and with open gate valve (D) All the above

Description : In centrifugal pump installation,  (A) Pump is properly primed before starting  (B) The diameter of the pipe at inlet as well as at outlet, is kept smaller than the delivery pipe  (C) The ... out if it is started with empty delivery pipe and with open gate valve  (D) All the above 

Last Answer : (D) All the above 

Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Description : Why Does The Safety Valve On My Compressor Pump Make A "popping" Sound?

Last Answer : This is most commonly an indication of bad valves. Depending on the model valves could be rebuilt or replaced.

Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Description : Ignition timing of a multi-cylinder SI engine can be adjusted by A. rotating the cam shaft B. adjusting the generator pulley C. rotating the distributor D. adjusting the pump pulley

Last Answer : ANSWER : C

In _____________ injection system only one pump is sufficient for multi-cylinder engine. a) air b) mechanical c) compression fuel d) common rail

Description : In _____________ injection system only one pump is sufficient for multi-cylinder engine. a) air b) mechanical c) compression fuel d) common rail

Last Answer : Answer: d Explanation: None.

Mixing of air and fuel in the diesel engine occurs in a. injection pump b. carburetor c. engine cylinder d. inlet manifold

Description : Mixing of air and fuel in the diesel engine occurs in a. injection pump b. carburetor c. engine cylinder d. inlet manifold

Last Answer : ANSWER c. engine cylinder

iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Description : iesel engine has less reserve torque then spark ignition because ∙ Torque-speed curve is governed by volumetric efficiency of fuel pump and engine cylinder ∙ Torque is a function of thermal efficiency ∙ Diesel engine has generally low speed engine ∙ None of the above

Last Answer : ∙ Torque is a function of thermal efficiency

Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Description : Radio wave concentration in the direction of the signal emitted by a directional antenna. A. Back lobe radiation B. Side lobe radiation C. Major lobe radiation D. Transmitted signal

Last Answer : C. Major lobe radiation

The valve used to control the back flow of digesta from ventriculus to crop is C A. Mesentronic valve B. Proctodaeal valve C. Stomodaeal valve D. Atrial valve

Description : The valve used to control the back flow of digesta from ventriculus to crop is C A. Mesentronic valve B. Proctodaeal valve C. Stomodaeal valve D. Atrial valve

Last Answer : Stomodaeal valve

Back-trapping in a distillation column (A) Increases tray efficiency (B) Decreases tray efficiency (C) Reduces pressure drop (D) Is desirable, as it provides improved vapour-liquid contact

Description : Back-trapping in a distillation column (A) Increases tray efficiency (B) Decreases tray efficiency (C) Reduces pressure drop (D) Is desirable, as it provides improved vapour-liquid contact

Last Answer : (B) Decreases tray efficiency

The haemodialyzer has semi-permeable lining of tubes which help to: (a) To maintain osmotic pressure of blood. (b) To filter nitrogenous wastes from the dialyzing solution. (c) In passing the waste product, in the dialyzing solution. (d) To pump purified blood back into the body of the patient.

Description : The haemodialyzer has semi-permeable lining of tubes which help to: (a) To maintain osmotic pressure of blood. (b) To filter nitrogenous wastes from the dialyzing solution. (c) In passing the waste product, in the dialyzing solution. (d) To pump purified blood back into the body of the patient.

Last Answer : (c) In passing the waste product, in the dialyzing solution.

A globe valve is the most suitable for applications, in which (A) Fluid flow control is required (B) Fluid contains dispersed solid particles (C) Valve is required to be either fully open or fully closed (D) One way flow is required

Description : A globe valve is the most suitable for applications, in which (A) Fluid flow control is required (B) Fluid contains dispersed solid particles (C) Valve is required to be either fully open or fully closed (D) One way flow is required

Last Answer : (A) Fluid flow control is required

The most economical flow control valve for use with large diameter pipes is a (A) Butterfly valve (B) Globe valve (C) Needle valve (D) None of these

Description : The most economical flow control valve for use with large diameter pipes is a (A) Butterfly valve (B) Globe valve (C) Needle valve (D) None of these

Last Answer : (A) Butterfly valve

Remote control valve is a __________ valve. (A) Gate (B) Butterfly (C) Needle (D) Globe

Description : Remote control valve is a __________ valve. (A) Gate (B) Butterfly (C) Needle (D) Globe

Last Answer : (B) Butterfly