Description : Bernoulli's equation is applied to (A) Venturimeter (B) Orifice meter (C) Pitot tube (D) All of these
Last Answer : Answer: Option D
Description : __________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge (C) Pitot tube (D) Orificemeter
Last Answer : (C) Pitot tube
Description : Water flow rate in a pipe of 3.5 metres diameter can be most economically and conveniently measured by a/an (A) Pitot tube (B) Venturimeter (C) Orificemeter (D) Rotameter
Last Answer : (A) Pitot tube
Description : The pressure head of a flow meter remains constant for (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube
Last Answer : (C) Rotameter
Description : Which of the following can be used for the direct measurement of volumetric flow rate of slurry? (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube
Description : Which of the following is used for very accurate measurement of flow of gas at low velocity? (A) Pitot tube (B) Rotameter (C) Segmental orificemeter (D) Hot wire anemometer
Last Answer : (D) Hot wire anemometer
Description : Which is not a variable head meter? (A) Venturimeter (B) Pitot tube (C) Rotameter (D) None of these
Description : In a/an __________, the flow rate of fluids is obtained by measuring the difference between the impact and the static pressure. (A) Rotameter (B) Pitot tube (C) Venturimeter (D) Flow nozzle
Last Answer : (B) Pitot tube
Description : Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube
Description : Which of the following instrument can be used for measuring speed of an aeroplane? (A) Venturimeter (B) Orifice plate (C) Pitot tube (D) Rotameter
Last Answer : Answer: Option C
Description : Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, ... (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.
Description : Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube
Description : Flow measurement in an open channel is done by a/an (A) Venturimeter (B) Orificemeter (C) Weir (D) Rotameter
Last Answer : (C) Weir
Description : Venturimeter and orificemeter measures the __________ of the fluid. (A) Pressure (B) Maximum velocity (C) Average velocity (D) Point velocity
Last Answer : (C) Average velocity
Description : Select the wrong statement pertaining to flow of an incompressible fluid through a Venturimeter. (A) For frictionless flow, the fluid pressure entering the venturi meter will be exactly equal ... than an orificemeter (D) Venturimeter incurs less power loss compared to an equivalent orificemeter
Last Answer : (C) Venturimeter occupies less space than an orificemeter
Description : Power loss in an orificemeter is __________ that in a Venturimeter. (A) Less than (B) Same as (C) More than (D) Data insufficient, cannot be predicted
Last Answer : (C) More than
Description : Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter
Last Answer : (B) Venturimeter
Description : For the same flow rate of a fluid, the pressure drop is the least for (A) Venturimeter (B) Orificemeter (C) Flow-nozzle (D) Δp is same for all
Last Answer : (A) Venturimeter
Description : Which of the following flow measuring devices is an area meter? (A) Venturimeter (B) Orificemeter (C) Anemometer (D) Rotameter
Last Answer : (D) Rotameter
Description : For a given fluid flow rate, which of the following incurs maximum head loss? (A) Orificemeter (B) Venturimeter (C) Flow nozzle (D) All of them incur the same head loss
Last Answer : (A) Orificemeter
Description : Which is the most efficient and best for measuring very small flow rate of gases? (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Flow nozzle
Description : Which of the following instruments is used to measure flow on the application of Bernoulli's theorem? (A) Venturimeter (B) Orifice plate (C) Nozzle (D) All of the above
Description : The simple Pitot tube measures the __________ pressure. (A) static (B) Dynamic (C) Total (D) None of these
Last Answer : (C) Total
Description : The simple Pitot tube does not measure the (A) Static pressure (B) Dynamic pressure (C) Velocity at the stagnation point (D) All (A), (B) and (C)
Last Answer : (D) All (A), (B) and (C)
Description : Which of the following may be termed as a variable orifice flow-meter? (A) Rotameter (B) Pitot tube (C) V-notch (D) All (A), (B) and (C)
Last Answer : (A) Rotameter
Description : Small pressure differences in liquids is measured using a/an (A) U-tube manometer (B) Inclined tube manometer (C) Pitot tube (D) None of these
Last Answer : (B) Inclined tube manometer
Description : The most suitable flow measuring device for the fluid flow measurement in a very large diameter pipeline is a (A) Weir (B) Pitot tube (C) Kennison nozzle (D) V-notch
Description : The Prandtl Pitot tube measures the (A) Velocity at a point in the flow (B) Pressure at a point (C) Average flow velocity (D) Pressure difference in pipe flow
Last Answer : (A) Velocity at a point in the flow
Description : The pitot static tube does not measure the __________ pressure. (A) Static (B) Total (C) Difference in static & dynamic (D) All (A), (B) and (C)
Description : Flow rate of high velocity flue gas discharged through a stack to the atmosphere can be most conveniently measured by a (A) Pitot tube (B) Manometer (C) Rotameter (D) None of these
Description : A Pitot tube indicates 5 cm of water (manometer) when it is being used for measuring velocity of air. The velocity of air in m/sec is (A) 5 (B) 14.1 (C) 56.22 (D) 28.2
Last Answer : (D) 28.2
Description : Speed of a submarine in deep sea & that of an aeroplane is measured by a/an (A) Pitot tube (B) Hot wire anemometer (C) Rotameter (D) Stroboscope
Description : The best instrument for measuring the velocity of a stream flow is (A) Pitot tube (B) Price's current meter (C) Surface float (D) Sub-surface float
Last Answer : Answer: Option B
Description : Pitot tube is used for measurement of (A) Pressure (B) Flow (C) Velocity (D) Discharge
Description : A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe
Last Answer : Answer: Option A
Description : Air velocity in ducts can be measured by using and manometer a) Orifice meter b) Borden gauge c) Pitot tube d) Anemometer
Last Answer : Pitot tube
Description : What instrument is used to measure atmospheric pressure? A. Pitot tube B. Wind vane C. Barometer D. Manometer
Last Answer : Barometer
Description : Which of the following is NOT an instrument used to measure pressure? A. Bourdon tube B. Pitot tube C. Aneroid D. Manometer
Description : Explain the working of a Pitot tube.
Last Answer : The pitot tube measures the velocity at point in the conduct. If quantity rate measurement is desired, it must be calculated from the ratio of average velocity to the velocity at the point of measurement. ... will be a measure of the impact pressure and therefore of the velocity of the stream oil.
Description : Bernoulli's equation describes the (A) Mechanical energy balance in potential flow (B) Kinetic energy balance in laminar flow (C) Mechanical energy balance in turbulent flow (D) Mechanical energy balance in boundary layer
Last Answer : (A) Mechanical energy balance in potential flow
Description : Bernoulli's equation is dependent on the (A) First law of thermodynamics (B) Third law of thermodynamics (C) Law of conservation of momentum (D) None of these
Last Answer : (D) None of these
Description : Bernoulli's equation for fluid flow is derived following certain assumptions. Out of the assumptions listed below, which set of assumptions is used in derivation of Bernoulli's equation? A. Fluid flow is frictionless & irrotational. B. Fluid flow is ... A, C, D (B) B, D, E (C) A, B, E (D) A, D, E
Last Answer : (C) A, B, E
Description : Each term in Bernoulli’s equation represents the __________ of the fluid. (A) Energy per unit mass (B) Energy per unit weight (C) Force per unit mass (D) None of these
Last Answer : (B) Energy per unit weight
Description : Each term of the Bernoulli's equation written in the form, (p/ρ) + (g/gc ). Z + (v 2 /2gc ) = constant, represents the total energy per unit (A) Mass (B) Volume (C) Specific weight (D) None of these
Last Answer : (A) Mass
Description : Bernoulli's equation accounts for the (A) Various momentums (B) Various masses (C) Different forms of mechanical energy (D) None of these
Last Answer : (C) Different forms of mechanical energy
Description : Bernoulli's equation for steady, frictionless, continuous flow states that the __________ at all sections is same. (A) Total pressure (B) Total energy (C) Velocity head (D) None of these
Last Answer : (B) Total energy
Description : For steady ideal fluid flow, the Bernoulli's equation states that the (A) Velocity is constant along a stream line (B) Energy is constant throughout the fluid (C) Energy is constant along a stream line, but may vary across stream lines (D) None of these
Last Answer : (C) Energy is constant along a stream line, but may vary across stream lines
Description : In deriving Bernoulli's equation, fluid is assumed to be (A) Incompressible, frictionless, steady, along a streamline (B) Uniform, steady, incompressible, along a streamline (C) Steady, density being pressure dependent, frictionless (D) None of these
Last Answer : (A) Incompressible, frictionless, steady, along a streamline
Description : Bernoulli's equation is not applicable, when the flow is (A) Irrotational (B) Incompressible (C) Viscous (D) All (A), (B) & (C
Last Answer : (D) All (A), (B) & (C)
Description : Applicability of Bernoulli's equation is limited to a/an __________ fluid, that does not exchange shaft work with the surroundings. (A) Incompressible (B) Non-viscous (C) Both (A) and (B) (D) Neither (A) nor (B)
Last Answer : (C) Both (A) and (B)