The most suitable flow measuring device for the fluid flow measurement in a very large diameter pipeline is a (A) Weir(B) Pitot tube(C) Kennison nozzle(D) V-notch

The most suitable flow measuring device for the fluid flow
measurement in a very large diameter pipeline is a
(A) Weir
(B) Pitot tube
(C) Kennison nozzle
(D) V-notch
by

1 Answer

Answer :

(B) Pitot tube
by

Related questions

__________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge(C) Pitot tube(D) Orificemeter

Description : __________ is used for measuring the static pressure exerted on the wall by a fluid flowing parallel to the wall in a pipeline. (A) Venturimeter (B) Pressure gauge (C) Pitot tube (D) Orificemeter

Last Answer : (C) Pitot tube

In a/an __________, the flow rate of fluids is obtained by measuring the difference between the impact and the static pressure. (A) Rotameter (B) Pitot tube (C) Venturimeter (D) Flow nozzle

Description : In a/an __________, the flow rate of fluids is obtained by measuring the difference between the impact and the static pressure. (A) Rotameter (B) Pitot tube (C) Venturimeter (D) Flow nozzle

Last Answer : (B) Pitot tube

A pipe of length more than double the diameter of orifice fitted externally or internally to the orifice is called a (A) Notch (B) Weir (C) Mouthpiece (D) Nozzle

Description : A pipe of length more than double the diameter of orifice fitted externally or internally to the orifice is called a (A) Notch (B) Weir (C) Mouthpiece (D) Nozzle

Last Answer : Answer: Option C

Which of the following may be termed as a variable orifice flow-meter? (A) Rotameter (B) Pitot tube (C) V-notch (D) All (A), (B) and (C)

Description : Which of the following may be termed as a variable orifice flow-meter? (A) Rotameter (B) Pitot tube (C) V-notch (D) All (A), (B) and (C)

Last Answer : (A) Rotameter

Which of the following is used for very accurate measurement of flow of gas at low velocity? (A) Pitot tube (B) Rotameter (C) Segmental orificemeter (D) Hot wire anemometer

Description : Which of the following is used for very accurate measurement of flow of gas at low velocity? (A) Pitot tube (B) Rotameter (C) Segmental orificemeter (D) Hot wire anemometer

Last Answer : (D) Hot wire anemometer

Which of the following can be used for the direct measurement of volumetric flow rate of slurry? (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Description : Which of the following can be used for the direct measurement of volumetric flow rate of slurry? (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Last Answer : (C) Rotameter

Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation (B) Cavitation may be caused due to boiling of liquid by decreasing the pressure resulting in formation & collapse of vapor cavities (C) Cavitation begins at higher static pressure and lower velocity in larger diameter pipelines resulting in audible noise(D) Large scale cavitation cannot damage pipeline, restrict fluid flow anddamage steam turbine blades

Description : Pick out the wrong statement about cavitation. (A) Sudden reduction of pressure in a fluid flow system caused by flow separation, vortex formation or abrupt closing of valve leads to cavitation ... (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

Last Answer : (D) Large scale cavitation cannot damage pipeline, restrict fluid flow and damage steam turbine blades

The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Description : The discharge through a V-notch weir varies as (A) H3/2 (B) H1/2 (C) H5/2 (D) H2/3

Last Answer : (C) H5/2

Venturimeters, orificemeters and nozzles are used to measure the fluid discharge from a pipeline. The average fluid velocity in a pipeline can be measured by a/an (A) Weir (B) Hot wire anemometer (C) Cup and vane anemometer (D) None of these

Description : Venturimeters, orificemeters and nozzles are used to measure the fluid discharge from a pipeline. The average fluid velocity in a pipeline can be measured by a/an (A) Weir (B) Hot wire anemometer (C) Cup and vane anemometer (D) None of these

Last Answer : (B) Hot wire anemometer

The best instrument for measuring the velocity of a stream flow is (A) Pitot tube (B) Price's current meter (C) Surface float (D) Sub-surface float

Description : The best instrument for measuring the velocity of a stream flow is (A) Pitot tube (B) Price's current meter (C) Surface float (D) Sub-surface float

Last Answer : Answer: Option B

Pitot tube is used for measurement of (A) Pressure (B) Flow (C) Velocity (D) Discharge

Description : Pitot tube is used for measurement of (A) Pressure (B) Flow (C) Velocity (D) Discharge

Last Answer : Answer: Option C

Water flow rate in a pipe of 3.5 metres diameter can be most economically and conveniently measured by a/an (A) Pitot tube (B) Venturimeter (C) Orificemeter (D) Rotameter

Description : Water flow rate in a pipe of 3.5 metres diameter can be most economically and conveniently measured by a/an (A) Pitot tube (B) Venturimeter (C) Orificemeter (D) Rotameter

Last Answer : (A) Pitot tube

Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Description : Flow of water in a pipe about 3 metres in diameter can be measured by (A) Orifice plate (B) Venturimeter (C) Rotameter (D) Pitot tube

Last Answer : Answer: Option D

Why does the v notch give more accurate flow measurement than any other weirs?

Description : Why does the v notch give more accurate flow measurement than any other weirs?

Last Answer : Need answer

A Pitot tube indicates 5 cm of water (manometer) when it is being used for measuring velocity of air. The velocity of air in m/sec is (A) 5 (B) 14.1 (C) 56.22 (D) 28.2

Description : A Pitot tube indicates 5 cm of water (manometer) when it is being used for measuring velocity of air. The velocity of air in m/sec is (A) 5 (B) 14.1 (C) 56.22 (D) 28.2

Last Answer : (D) 28.2

Which is the most efficient and best for measuring very small flow rate of gases? (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Flow nozzle

Description : Which is the most efficient and best for measuring very small flow rate of gases? (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Flow nozzle

Last Answer : (C) Rotameter

Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Description : Which of the following instrument can be used for measuring speed of a submarine moving in deep sea? (A) Venturimeter (B) Orifice plate (C) Hot wire anemometer (D) Pitot tube

Last Answer : Answer: Option D

Which of the following instrument can be used for measuring speed of an aeroplane? (A) Venturimeter (B) Orifice plate (C) Pitot tube(D) Rotameter

Description : Which of the following instrument can be used for measuring speed of an aeroplane? (A) Venturimeter (B) Orifice plate (C) Pitot tube (D) Rotameter

Last Answer : Answer: Option C

Most appropriate instrument for measurement of internal and external diameter of a tube is A. vernier callipers B. micrometer screw gauge C. meter rule D. measuring tape

Description : Most appropriate instrument for measurement of internal and external diameter of a tube is A. vernier callipers B. micrometer screw gauge C. meter rule D. measuring tape

Last Answer : vernier callipers

08. The difference between the notch and weir is that the notch is of bigger size and the weir is of a smaller size. A) Agree B) Disagree

Description : 08. The difference between the notch and weir is that the notch is of bigger size and the weir is of a smaller size. A) Agree B) Disagree

Last Answer : B

A structure used to dam up a stream or river over which the water flows is called (A) Orifice (B) Notch (C) Weir (D) Dam

Description : A structure used to dam up a stream or river over which the water flows is called (A) Orifice (B) Notch (C) Weir (D) Dam

Last Answer : Answer: Option C

4 The sheet of water flowing over a notch or a weir is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of thes

Description : 4 The sheet of water flowing over a notch or a weir is known as (A) Sill or crest (B) Nappe or vein (C) Orifice (D) None of thes

Last Answer : Answer: Option B

An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called (A) Weir (B) Notch (C) Orifice(D) None of these

Description : An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called (A) Weir (B) Notch (C) Orifice (D) None of these

Last Answer : Answer: Option B

Differentiate any four points between notch and weir.

Description : Differentiate any four points between notch and weir. 

Last Answer : Sr.No. Notch Weir 1 It is an opening provided on one side of the tank or reservoir with free surface of liquid below the top edge of the opening. It is a structure which ... Trapezoidal, stepped notch. e. g. According to shape, discharge, width of crest, nature of crest.

Flow measurement in an open channel is done by a/an (A) Venturimeter (B) Orificemeter (C) Weir (D) Rotameter

Description : Flow measurement in an open channel is done by a/an (A) Venturimeter (B) Orificemeter (C) Weir (D) Rotameter

Last Answer : (C) Weir

The pressure head of a flow meter remains constant for (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Description : The pressure head of a flow meter remains constant for (A) Venturimeter (B) Orificemeter (C) Rotameter (D) Pitot tube

Last Answer : (C) Rotameter

The Prandtl Pitot tube measures the (A) Velocity at a point in the flow (B) Pressure at a point (C) Average flow velocity (D) Pressure difference in pipe flow

Description : The Prandtl Pitot tube measures the (A) Velocity at a point in the flow (B) Pressure at a point (C) Average flow velocity (D) Pressure difference in pipe flow

Last Answer : (A) Velocity at a point in the flow

Flow rate of high velocity flue gas discharged through a stack to the atmosphere can be most conveniently measured by a (A) Pitot tube (B) Manometer (C) Rotameter (D) None of these

Description : Flow rate of high velocity flue gas discharged through a stack to the atmosphere can be most conveniently measured by a (A) Pitot tube (B) Manometer (C) Rotameter (D) None of these

Last Answer : (A) Pitot tube

Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Description : Out of the following flow measuring devices, which one incurs themaximum installation cost as well as pressure loss? (A) Flow nozzle (B) Venturimeter (C) Rotameter (D) Orificemeter

Last Answer : (B) Venturimeter

A Venturimeter cannot be used for the direct measurement of (A) Datum difference in the stretch of pipe-flow (B) Pressure difference in the flow through pipeline(C) Friction loss in pipe flow(D) All (A), (B) and (C)

Description : A Venturimeter cannot be used for the direct measurement of (A) Datum difference in the stretch of pipe-flow (B) Pressure difference in the flow through pipeline (C) Friction loss in pipe flow (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, kinetic energy and pressure energy. (C) The length of divergent portion in a Venturimeter is equal to the convergent portion. (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Description : Which of the following statement is wrong? (A) A flow whose streamline is represented by a curve is called two dimensional flow. (B) The total energy of a liquid particle is the sum of potential energy, ... (D) A pitot tube is used to measure the velocity of flow at the required point in a pipe.

Last Answer : Answer: Option C

A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Description : A pitot tube is used to measure the (A) Velocity of flow at the required point in a pipe (B) Pressure difference between two points in a pipe (C) Total pressure of liquid flowing in a pipe (D) Discharge through a pipe

Last Answer : Answer: Option A

For the same flow rate of a fluid, the pressure drop is the least for (A) Venturimeter (B) Orificemeter (C) Flow-nozzle (D) Δp is same for all

Description : For the same flow rate of a fluid, the pressure drop is the least for (A) Venturimeter (B) Orificemeter (C) Flow-nozzle (D) Δp is same for all

Last Answer : (A) Venturimeter

Which of the following exemplifies a three dimensional fluid flow? (A) Fluid flow at the inlet to a nozzle (B) Fluid flow between parallel plates (C) Viscous fluid flow between converging plates (D) None of these

Description : Which of the following exemplifies a three dimensional fluid flow? (A) Fluid flow at the inlet to a nozzle (B) Fluid flow between parallel plates (C) Viscous fluid flow between converging plates (D) None of these

Last Answer : (A) Fluid flow at the inlet to a nozzle

For a given fluid flow rate, which of the following incurs maximum head loss? (A) Orificemeter (B) Venturimeter (C) Flow nozzle (D) All of them incur the same head loss

Description : For a given fluid flow rate, which of the following incurs maximum head loss? (A) Orificemeter (B) Venturimeter (C) Flow nozzle (D) All of them incur the same head loss

Last Answer : (A) Orificemeter

The energy loss in flow through Venturimeter is less than that through flow nozzle, because in case of a flow nozzle, the (A) Length is shorter (B) Throat diameter is more (C) Sudden expansion of flow in the downstream occurs (D) Distance between the throat and the inlet is more

Description : The energy loss in flow through Venturimeter is less than that through flow nozzle, because in case of a flow nozzle, the (A) Length is shorter (B) Throat diameter is more (C) Sudden expansion of flow in the downstream occurs (D) Distance between the throat and the inlet is more

Last Answer : (C) Sudden expansion of flow in the downstream occurs

Convective heat transfer co-efficient in case of fluid flowing in tubes is not affected by the tube length/diameter ratio, if the flow is in the __________ zone. (A) Laminar (B) Transition (C) Both 'a' & 'b' (D) Highly turbulent

Description : Convective heat transfer co-efficient in case of fluid flowing in tubes is not affected by the tube length/diameter ratio, if the flow is in the __________ zone. (A) Laminar (B) Transition (C) Both 'a' & 'b' (D) Highly turbulent

Last Answer : (D) Highly turbulent

A fluid is flowing inside the inner tube of a double pipe heat exchanger with diameter 'd'. For a fixed mass flow rate, the tube side heat transfer co￾efficient for turbulent flow conditions is proportional to (A) d 0.8 (B) d -0.2 (C) d -1 (D) d -1.8

Description : A fluid is flowing inside the inner tube of a double pipe heat exchanger with diameter 'd'. For a fixed mass flow rate, the tube side heat transfer co￾efficient for turbulent flow conditions is proportional to (A) d 0.8 (B) d -0.2 (C) d -1 (D) d -1.8

Last Answer : (B) d -0.2

Nature of fluid flow during the opening of a valve in a pipeline is (A) Laminar (B) Unsteady (C) Steady (D) Uniform

Description : Nature of fluid flow during the opening of a valve in a pipeline is (A) Laminar (B) Unsteady (C) Steady (D) Uniform

Last Answer : (B) Unsteady

Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Description : Fluid flow in a/an __________ is an example of pressure flow. (A) Partially filled pipeline (B) Pipe (C) Open channel (D) River

Last Answer : (B) Pipe

In case of supersonic flow of a fluid through pipeline, the 'Mach number' is (A) 0 (B) 1 (C) < 1 (D) > 1

Description : In case of supersonic flow of a fluid through pipeline, the 'Mach number' is (A) 0 (B) 1 (C) < 1 (D) > 1

Last Answer : (D) > 1

An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Description : An example of unsteady non uniform flow is the flow of liquid under pressure through a (A) Tapering pipe at constant flow rate (B) Tapering pipe at either decreasing or increasing flow rate (C) Long pipeline of constant diameter (D) None of these

Last Answer : (B) Tapering pipe at either decreasing or increasing flow rate

The most serious disadvantage of an orificemeter is that (A) It is not very accurate (B) It is very costly (C) Most of the pressure drop is not recoverable (D) It is not suitable for measuring gas flow

Description : The most serious disadvantage of an orificemeter is that (A) It is not very accurate (B) It is very costly (C) Most of the pressure drop is not recoverable (D) It is not suitable for measuring gas flow

Last Answer : (C) Most of the pressure drop is not recoverable

Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Description : Disc compensators are provided in large diameter fuel gas carrying pipelines to (A) Keep the pipe in proper orientation (B) Make the pipe joint leak-proof (C) Account for contraction/expansion ... due to temperature changes of the surroundings (D) Account for the pressure variation side the pipeline

Last Answer : (C) Account for contraction/expansion of pipe due to temperature changes of the surroundings

Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Description : Component to remove suspended matter large than a predetermined size from fluid. a. Relief valve. c. Filter b. Spray gun. d. Nozzle

Last Answer : Filter

The simple Pitot tube measures the __________ pressure.(A) static (B) Dynamic (C) Total (D) None of these

Description : The simple Pitot tube measures the __________ pressure. (A) static (B) Dynamic (C) Total (D) None of these

Last Answer : (C) Total

The simple Pitot tube does not measure the (A) Static pressure (B) Dynamic pressure (C) Velocity at the stagnation point (D) All (A), (B) and (C)

Description : The simple Pitot tube does not measure the (A) Static pressure (B) Dynamic pressure (C) Velocity at the stagnation point (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which is not a variable head meter? (A) Venturimeter (B) Pitot tube (C) Rotameter (D) None of these

Description : Which is not a variable head meter? (A) Venturimeter (B) Pitot tube (C) Rotameter (D) None of these

Last Answer : (C) Rotameter

Small pressure differences in liquids is measured using a/an (A) U-tube manometer (B) Inclined tube manometer (C) Pitot tube (D) None of these

Description : Small pressure differences in liquids is measured using a/an (A) U-tube manometer (B) Inclined tube manometer (C) Pitot tube (D) None of these

Last Answer : (B) Inclined tube manometer

Bernoulli’s equation does not apply to the functioning of a/an (A) Venturimeter (B) Orificemeter (C) pitot tube (D) None of these

Description : Bernoulli’s equation does not apply to the functioning of a/an (A) Venturimeter (B) Orificemeter (C) pitot tube (D) None of these

Last Answer : (D) None of these