With decrease in particle size to be fluidised by a particular fluid, the operating range of fluidisation velocity (A) Widens (B) Squeezes (C) Does not change (D) Unpredictable from the data

With decrease in particle size to be fluidised by a particular fluid, the
operating range of fluidisation velocity
(A) Widens
(B) Squeezes
(C) Does not change
(D) Unpredictable from the data
by

1 Answer

Answer :

(C) Does not change
by

Related questions

Minimum fluidisation velocity for a specific system depends upon the (A) Particle size (B) Fluid viscosity (C) Density of both the particle & the fluid (D) All (A), (B) and (C)

Description : Minimum fluidisation velocity for a specific system depends upon the (A) Particle size (B) Fluid viscosity (C) Density of both the particle & the fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below : Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, the minimum fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle ... fluidisation velocity, VOM is (A) 12 mm/s (B) 16 mm/s (C) 24 mm/s (D) 28 mm/s

Last Answer : (B) 16 mm/s

. A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Description : . A 0.5 m high bed made up of a 1 mm dia glass sphere (density 2500 kg/m3 ) is to be fluidised by water (density 1000 kg/m3 ). If at the point of incipient fluidisation, the bed voidage is 40%, the pressure drop across the bed is (A) 4.4 KPa (B) 2.94 KPa (C) 3.7 KPa (D) None of these

Last Answer : (A) 4.4 KPa

Minimum porosity for fluidisation is(A) That corresponding to static bed (B) That corresponding to completely fluidised bed (C) The porosity of the bed when true fluidisation begins (D) Less than that of the' static bed

Description : Minimum porosity for fluidisation is (A) That corresponding to static bed (B) That corresponding to completely fluidised bed (C) The porosity of the bed when true fluidisation begins (D) Less than that of the' static bed

Last Answer : (C) The porosity of the bed when true fluidisation begins

Which of the following is not an advantage of fluidisation from transferoperation point of view?(A) Intimate contact of the fluid with all parts of the solid particles(B) Lower fluid pumping power requirement(C) Minimisation of temperature variation(D) Prevention of particle segregation

Description : Which of the following is not an advantage of fluidisation from transferoperation point of view? (A) Intimate contact of the fluid with all parts of the solid particles (B) Lower fluid pumping power requirement (C) Minimisation of temperature variation (D) Prevention of particle segregation

Last Answer : (B) Lower fluid pumping power requirement

The main factor on which the behaviour of a mass of fluidised solid depends mainly is the (A) Fluid characteristics (B) Particle size (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The main factor on which the behaviour of a mass of fluidised solid depends mainly is the (A) Fluid characteristics (B) Particle size (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system (in SI units) is given below: Δ P/L = 375 × 10 3 VOM + 10.94 × 10 6 V2 OM (SI units) If water is to be used as the fluidising medium, in actual operation, the above bed has a height = 1 m. What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Description : A bed of spherical particles (specific gravity 2.5) of uniform size 1500 μm is 0.5 m in diameter and 0.5 m high. In packed bed state, the porosity may be taken as 0.4. Ergun's equation for the above fluid-particle system ... What is the porosity of the fluidised bed? (A) 0.2 (B) 0.5 (C) 0.7 (D) 0.8

Last Answer : (C) 0.7

In continuous fluidisation (A) Solids are completely entrained (B) The pressure drop is less than that for batch fluidisation (C) There is no entrainment of solids (D) Velocity of the fluid is very small

Description : In continuous fluidisation (A) Solids are completely entrained (B) The pressure drop is less than that for batch fluidisation (C) There is no entrainment of solids (D) Velocity of the fluid is very small

Last Answer : (A) Solids are completely entrained

The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Description : The terminal velocity of a solid spherical particle falling through a stationary fluid mass in the Stoke's law range is proportional to the (A) Inverse of fluid viscosity (B) Square of particle size (C) Difference in the densities of the particle & fluid (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Slugging in a fluidised bed can be avoided by using (A) Tall narrow vessel (B) Deep bed of solids (C) Shallow beds of solids and proper choice of particle size (D) Very large particles

Description : Slugging in a fluidised bed can be avoided by using (A) Tall narrow vessel (B) Deep bed of solids (C) Shallow beds of solids and proper choice of particle size (D) Very large particles

Last Answer : (C) Shallow beds of solids and proper choice of particle size

In Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass varies as the __________ of its diameter. (A) Inverse (B) Square root (C) Second power (D) First power

Description : In Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass varies as the __________ of its diameter. (A) Inverse (B) Square root (C) Second power (D) First power

Last Answer : (B) Square root

In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Description : In the Newton's law range, the terminal velocity of a solid spherical particle falling through a stationary fluid mass is __________ the fluid viscosity. (A) Directly proportional to (B) Inversely proportional to (C) Inversely proportional to the square root of (D) Independent of

Last Answer : (B) Inversely proportional to

In case of calcination of limestone, CaCO3 CaO + CO2 , the addition of more of CaO will result in __________ in the concentration of CO2 . (A) No change (B) Increase (C) Decrease (D) Unpredictable from the data

Description : In case of calcination of limestone, CaCO3 CaO + CO2 , the addition of more of CaO will result in __________ in the concentration of CO2 . (A) No change (B) Increase (C) Decrease (D) Unpredictable from the data

Last Answer : (A) No change

Umf is the minimum fluidisation velocity for a bed of particles. An increase in the superficial gas velocity from 2 Umf to 2.5 Umf results in (all velocities are smaller than the entrainment velocity of the particles) nochange in the(A) Drag on particles(B) Drag on column walls(C) Bed height(D) Bed voidage

Description : Umf is the minimum fluidisation velocity for a bed of particles. An increase in the superficial gas velocity from 2 Umf to 2.5 Umf results in (all velocities are smaller than the entrainment velocity of the particles ... (A) Drag on particles (B) Drag on column walls (C) Bed height (D) Bed voidage

Last Answer : (C) Bed height

Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Description : Brownian movement is prominent in the particle size range of __________ microns in case of settling of a particle in a fluid. (A) 2 to 3 (B) 0.01 to 0.10 (C) 200 to 300 (D) 100 to 1000

Last Answer : A) 2 to 3

In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Description : In reactions involving solids and liquids (where change in volume is negligible), the heat of reaction at constant pressure as compared to that at constant volume is (A) More (B) Less (C) Same (D) Unpredictable; depends on the particular reaction

Last Answer : (C) Same

When the pressure of a rock layers pressing on an aquifer from above and below squeezes water up to the earth surface is called an?

Description : When the pressure of a rock layers pressing on an aquifer from above and below squeezes water up to the earth surface is called an?

Last Answer : What is the answer ?

Fluidised beds are formed, when the (A) Fluid friction is zero (B) Gravity force is less than the fluid friction (C) Pressure forces equal gravity forces (D) Sum of the fluid friction and pressure forces is equal and opposite to gravity forces

Description : Fluidised beds are formed, when the (A) Fluid friction is zero (B) Gravity force is less than the fluid friction (C) Pressure forces equal gravity forces (D) Sum of the fluid friction and pressure forces is equal and opposite to gravity forces

Last Answer : (B) Gravity force is less than the fluid friction

Advantages of fluidised bed combustion are (A) Reduced NOx formation in flue gas (B) Lower furnace operating temperature (C) High heat transfer rate (D) All (A), (B) & (C)

Description : Advantages of fluidised bed combustion are (A) Reduced NOx formation in flue gas (B) Lower furnace operating temperature (C) High heat transfer rate (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

In Newton's law range, the drag co-efficient for the motion of spherical particle in a stationary fluid is (A) 0.44 (B) 0.044 (C) 4.4 (D) 44

Description : In Newton's law range, the drag co-efficient for the motion of spherical particle in a stationary fluid is (A) 0.44 (B) 0.044 (C) 4.4 (D) 44

Last Answer : (A) 0.44

The size of plug flow reactor (PFR) for all positive reaction orders and for any given duty, is __________ that of mixed reactor. (A) Greater than (B) Equal to (C) Smaller than (D) Unpredictable from the data

Description : The size of plug flow reactor (PFR) for all positive reaction orders and for any given duty, is __________ that of mixed reactor. (A) Greater than (B) Equal to (C) Smaller than (D) Unpredictable from the data

Last Answer : (C) Smaller than

The terminal velocity of a particle moving through a fluid varies as dp n . What is the value of n' for Newton's law regime? (A) 0.5 (B) 1 (C) 1.5 (D) 3

Description : The terminal velocity of a particle moving through a fluid varies as dp n . What is the value of n' for Newton's law regime? (A) 0.5 (B) 1 (C) 1.5 (D) 3

Last Answer : (A) 0.5

The terminal velocity of a particle moving through a fluid varies as dp n . The value of n is equal to __________ in Stoke's law regime. (A) 1 (B) 0.5 (C) 2 (D) 1.5

Description : The terminal velocity of a particle moving through a fluid varies as dp n . The value of n is equal to __________ in Stoke's law regime. (A) 1 (B) 0.5 (C) 2 (D) 1.5

Last Answer : (C) 2

A streamline is a line in flow field, (A) That is traced by all the fluid particles passing through a given point (B) Along which a fluid particle travels (C) Such that at every point on it, the velocity is tangential to it (D) None of these

Description : A streamline is a line in flow field, (A) That is traced by all the fluid particles passing through a given point (B) Along which a fluid particle travels (C) Such that at every point on it, the velocity is tangential to it (D) None of these

Last Answer : (C) Such that at every point on it, the velocity is tangential to it

Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal mixed reactor at steady state, the exit stream has the samecomposition as fluid within the reactor and the space time is equivalent toholding time for constant density system(C) Plug flow reactor (PFR) is always smaller than mixed reactor for allpositive reaction orders for a particular duty(D) Reaction rate does not decrease appreciably as the reaction proceeds incase of an autocatalytic reaction

Description : Pick out the wrong statement. (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity(B) For an ideal ... D) Reaction rate does not decrease appreciably as the reaction proceeds in case of an autocatalytic reaction

Last Answer : (A) For a first order consecutive reaction, a tubular flow reactor as compared to a stirred tank reactor provides higher overall selectivity

In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Description : In β-decay of radioactive material, the ratio of neutron to proton (A) Increases (B) Remain same (C) Decreases (D) Is unpredictable; may increase or decrease

Last Answer : (C) Decreases

As the impurities are oxidised, the melting point of iron (A) Decreases (B) Remains unchanged (C) Increases (D) May increase or decrease; unpredictable

Description : As the impurities are oxidised, the melting point of iron (A) Decreases (B) Remains unchanged (C) Increases (D) May increase or decrease; unpredictable

Last Answer : (C) Increases

With increase in molecular weight of the gas, the head developed by a centrifugal compressor will (A) Decrease (B) Increase (C) Remain same (D) Unpredictable

Description : With increase in molecular weight of the gas, the head developed by a centrifugal compressor will (A) Decrease (B) Increase (C) Remain same (D) Unpredictable

Last Answer : (A) Decrease

The total energy of each particle at various places in the case of perfect incompressible fluid flowing in continuous stream (A) Keeps on increasing (B) Keeps on decreasing (C) Remain constant (D) May increase/decrease

Description : The total energy of each particle at various places in the case of perfect incompressible fluid flowing in continuous stream (A) Keeps on increasing (B) Keeps on decreasing (C) Remain constant (D) May increase/decrease

Last Answer : Answer: Option C

Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a particle of a particular size is proportional to the square root of the surface to volume ratio of the product (C) Work required in crushing is proportional to the new surface created (D) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Description : Rittinger's crushing law states that (A) Work required to form a particle of any size is proportional to the square of the surface to volume ratio of the product (B) Work required to form a ... ) For a given machine and feed, crushing efficiency is dependent on the size of the feed & product

Last Answer : (C) Work required in crushing is proportional to the new surface created

Economics cannot be considered a perfect science because (a) Human behaviour is unpredictable (b) It is difficult to make correct prediction of economic variables (c) Economist do not have common opinion about a particular economic event (d) All the three

Description : Economics cannot be considered a perfect science because (a) Human behaviour is unpredictable (b) It is difficult to make correct prediction of economic variables (c) Economist do not have common opinion about a particular economic event (d) All the three

Last Answer : (d) All the three

When larger particles e.g., grains are subjected to fluidisation, the corresponding bed produced is termed as the __________ bed. (A) Spouted (B) Sluggish (C) Boiling (D) Teeter

Description : When larger particles e.g., grains are subjected to fluidisation, the corresponding bed produced is termed as the __________ bed. (A) Spouted (B) Sluggish (C) Boiling (D) Teeter

Last Answer : (A) Spouted

According to special theory of relativity the mass of a particle – (1) increases with increase in velocity with respect to an observer. (2) decreases with increase in velocity. (3) decreases with decrease in velocity. (4) is independent of its velocity.

Description : According to special theory of relativity the mass of a particle – (1) increases with increase in velocity with respect to an observer. (2) decreases with increase in velocity. (3) decreases with decrease in velocity. (4) is independent of its velocity.

Last Answer : (1) increases with increase in velocity with respect to an observer. Explanation: According to the Special Theory of Relativity, the mass of a moving object measures more as its velocity increases until, ... becomes infinite. This is because as an object gains speed, it gains more (kinetic) energy.

According to special theory of relativity the mass of a particle (1) increases with increase in velocity with respect to an observer. (2) decreases with increase in velocity. (3) decreases with decrease in velocity. (4) is independent of its velocity.

Description : According to special theory of relativity the mass of a particle (1) increases with increase in velocity with respect to an observer. (2) decreases with increase in velocity. (3) decreases with decrease in velocity. (4) is independent of its velocity.

Last Answer : increases with increase in velocity with respect to an observer.

The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The uniformity of a gas fluidised bed depends upon the __________ of the solid particles. (A) Size (B) Surface properties (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Arrange the following size reduction equipment in the decreasing order of the average particle size produced by each of them. (A) Jaw crusher, Ball mill, Fluid energy mill(B) Ball mill, Jaw crusher, Fluid energy mill(C) Fluid energy mill, Jaw crusher, Ball mill(D) Fluid energy mill, Ball mill, Jaw crusher

Description : Arrange the following size reduction equipment in the decreasing order of the average particle size produced by each of them. (A) Jaw crusher, Ball mill, Fluid energy mill (B) Ball mill, Jaw crusher, Fluid ... C) Fluid energy mill, Jaw crusher, Ball mill (D) Fluid energy mill, Ball mill, Jaw crusher

Last Answer : (A) Jaw crusher, Ball mill, Fluid energy mill

Which of the following factors control the design of a fluid-solid reactor? (A) Reaction kinetics for single particle (B) Size distribution of solids being treated (C) Flow patterns of solids and fluid in the reactor (D) All (A), (B) and (C)

Description : Which of the following factors control the design of a fluid-solid reactor? (A) Reaction kinetics for single particle (B) Size distribution of solids being treated (C) Flow patterns of solids and fluid in the reactor (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

As the wealth gap widens between the rich and the poor. Why do companies and corporations seem not concerned that before long there will be very few people left that can actually afford their goods and services?

Description : As the wealth gap widens between the rich and the poor. Why do companies and corporations seem not concerned that before long there will be very few people left that can actually afford their goods and services?

Last Answer : answer:Short-term Because the people at the top know it's a pyramid scheme and already have their exit strategy in place once they are done looting everything. Long-term goods and services will ... access them it all comes toppling down. It's destined to fail eventually since resources are finite.

The Ganga plain widens from (a) south to north (b) west to east (c) north to south (d) east to west

Description : The Ganga plain widens from (a) south to north (b) west to east (c) north to south (d) east to west

Last Answer : Ans: (d)

The Ganga-Brahmaputra Plain widens (a) from east to west (b) from west to east (c) at the middle (d) No where

Description : The Ganga-Brahmaputra Plain widens (a) from east to west (b) from west to east (c) at the middle (d) No where

Last Answer : Ans: (b)

The sideways erosion which widens the river valley called? (1) Lateral Corrosion (2) Vertical Corrosion (3) Side Corrosion (4) Mean Corrosion

Description : The sideways erosion which widens the river valley called? (1) Lateral Corrosion (2) Vertical Corrosion (3) Side Corrosion (4) Mean Corrosion

Last Answer : (1) Lateral Corrosion Explanation: Sideways form of erosion is called lateral erosion. In lateral erosion, the river erodes away at its banks and widens the river channel. Together, vertical and lateral erosion create the distinctive V-shaped valley that is found in rivers in their upper course.

A far-sighted person, without optical correction, is typically able to see nearby objects more clearly in bright light. The reason for this phenomena is: w) bright light provides better illumination. x) the pupil of the eye narrows which increases the depth of focus. y) the pupil of the eye widens which increases the depth of focus. z) the bright light causes squinting which flattens the eyeball which tends to correct the far-sighted condition.

Description : A far-sighted person, without optical correction, is typically able to see nearby objects more clearly in bright light. The reason for this phenomena is: w) bright light provides better ... bright light causes squinting which flattens the eyeball which tends to correct the far-sighted condition.

Last Answer : ANSWER: X -- THE PUPIL OF THE EYE NARROWS WHICH INCREASES THE DEPTH OF FOCUS

If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be(A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Description : If cohesion between molecules of a fluid is greater than adhesion between fluid and glass, then the free level of fluid in a dipped glass tube will be (A) Higher than the surface of liquid (B) The same as the surface of liquid (C) Lower than the surface of liquid (D) Unpredictable

Last Answer : Answer: Option C

In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air consumption, brake power and incylinder pressure. Tutorials on engine performance parameters. Heat balance sheet. Engine performance curves. 1. The increase in intake air temperature into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Description : In four stroke engine which of the following is also known as power stroke a. Suction stroke b. Compression stroke c. Expansion stroke d. Exhaust stroke (Ans:c) Measurements of fuel and air ... into IC engine,___________its efficiency A. increase B. decrease C. does not alter D. unpredictable on

Last Answer : ANSWER : B

If the intake air temperature of Internal combustion engine increases, its efficiency will a. increase b. decrease c.remains same d unpredictable

Description : If the intake air temperature of Internal combustion engine increases, its efficiency will a. increase b. decrease c.remains same d unpredictable

Last Answer : ANSWER b. decrease

The melting points of aldehydes and ketones tend to : (a) decrease with increasing molecular weight. (b) increase with increasing molecular weight. (c) remain unchanged with increasing molecular weight. (d) be unpredictable due to resonance

Description : The melting points of aldehydes and ketones tend to : (a) decrease with increasing molecular weight. (b) increase with increasing molecular weight. (c) remain unchanged with increasing molecular weight. (d) be unpredictable due to resonance

Last Answer : increase with increasing molecular weight.

The ideal efficiency of a Brayton cycle with regeneration, with increase in pressure ratio will  (a) increase  (b) decrease  (c) remain unchanged  (d) increase/decrease depending on ap-plication  (e) unpredictable. “

Description : The ideal efficiency of a Brayton cycle with regeneration, with increase in pressure ratio will  (a) increase  (b) decrease  (c) remain unchanged  (d) increase/decrease depending on ap-plication  (e) unpredictable. “

Last Answer : Answer : b

In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Description : In an isothermal process, the internal energy of gas molecules  (a) increases  (b) decreases  (c) remains constant  (d) may increase/decrease depending on the properties of gas  (e) shows unpredictable behaviour.

Last Answer : Answer : c

The angle of projection when the range is equal to the distance through which the particle would have fallen in order to acquire a velocity equal to the velocity of projection will be a.30? b.45? c.15? d.90? e.22

Description : The angle of projection when the range is equal to the distance through which the particle would have fallen in order to acquire a velocity equal to the velocity of projection will be a.30? b.45? c.15? d.90? e.22

Last Answer : c. 15?

The fuel air ratio in a petrol engine fitted with suction carburetor, operating with dirty air filter as compared to clean filter will be A. higher B. lower C. remain unaffected D. unpredictable

Description : The fuel air ratio in a petrol engine fitted with suction carburetor, operating with dirty air filter as compared to clean filter will be A. higher B. lower C. remain unaffected D. unpredictable

Last Answer : ANSWER : A