A fluid is pumped at the rate of 10 lb/sec to a height of 55 ft. The horse power required is __________ hp. (A) 1 (B) 10/55 (C) 5.5 (D) 1/55

A fluid is pumped at the rate of 10 lb/sec to a height of 55 ft. The horse
power required is __________ hp.
(A) 1
(B) 10/55
(C) 5.5
(D) 1/55
by

1 Answer

Answer :

(A) 1
by

Related questions

A problem Drum ( 3 ft. diameter ; 6 ft. height ) is field with a fluid whose density is 50 lb/ft^3. Determine the total volume of the fluid.  A. 42.41 ft^3  B.44.35 ft^3  C.45.63 ft^3  D.41.23 ft^3 Formula: Vf = (pi d^2 h) / 4

Description : A problem Drum ( 3 ft. diameter ; 6 ft. height ) is field with a fluid whose density is 50 lb/ft^3. Determine the total volume of the fluid.  A. 42.41 ft^3  B.44.35 ft^3  C.45.63 ft^3  D.41.23 ft^3 Formula: Vf = (pi d^2 h) / 4

Last Answer : 42.41 ft^3

What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Description : What horse power is required to isothermally compress 800 ft^3 of Air per minute from 14.7 psia to 120 psia?  A. 28 hp  B.108 hp  C.256 hp  D.13900 hp Formula: W= p1V1 ln (p1/p2) Power = dW / dt

Last Answer : 108 hp

The unit of velocity head is (A) ft-lb/sec (B) ft-lb/ft 3 (C) ft-lbf/lb (D) ft-lbf/sec

Description : The unit of velocity head is (A) ft-lb/sec (B) ft-lb/ft 3 (C) ft-lbf/lb (D) ft-lbf/sec

Last Answer : (C) ft-lbf/lb

How much work is done in 1 minute by a machine operating at 300 ft. lb-sec?

Description : How much work is done in 1 minute by a machine operating at 300 ft. lb-sec?

Last Answer : Feel Free to Answer

A stone dropped from a baloon that was ascending at the rate of 30 ft/sec, reaches ground after 10 secs. The height of the baloon where stone was dropped was a.3420 ft b.107 dynes c.4520 ft d.2310 ft e.1310 ft

Description : A stone dropped from a baloon that was ascending at the rate of 30 ft/sec, reaches ground after 10 secs. The height of the baloon where stone was dropped was a.3420 ft b.107 dynes c.4520 ft d.2310 ft e.1310 ft

Last Answer : e. 1310 ft

The flow energy of 5 ft3 of a fluid passing a boundary to a system is 80,000 ft-lb. Determine the pressure at this point.  a. 222 psi  b. 333 psi  c. 444 psi  d. 111 psi formula: Ef= pV

Description : The flow energy of 5 ft3 of a fluid passing a boundary to a system is 80,000 ft-lb. Determine the pressure at this point.  a. 222 psi  b. 333 psi  c. 444 psi  d. 111 psi formula: Ef= pV

Last Answer : 111 psi

Which of the following is not the unit of power? (A) kW (kilowatt) (B) hp (horse power) (C) kcal/sec (D) kcal/kg sec

Description : Which of the following is not the unit of power?  (A) kW (kilowatt)  (B) hp (horse power)  (C) kcal/sec  (D) kcal/kg sec 

Last Answer : (D) kcal/kg sec 

Calculate: a. Mass flow rate in lb/hr. b. The velocity at section 2 in fps  a. 800,000lb/hr;625ft/s  b. 900,000lb/hr;625 ft/s  c. 888,000lb/hr;269 ft/s  d. 700,000lb/hr;269 ft/s m = A1V!/V1

Description : Calculate: a. Mass flow rate in lb/hr. b. The velocity at section 2 in fps  a. 800,000lb/hr;625ft/s  b. 900,000lb/hr;625 ft/s  c. 888,000lb/hr;269 ft/s  d. 700,000lb/hr;269 ft/s m = A1V!/V1

Last Answer : 900,000 lb/hr;625 ft/s

Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) (A) D = 1840 H0.5 /N (B) D = 1840 N/H0.5 (C) H = 1840 D0.5 /N (D) D = 1840 H/N

Description : Which is the correct relationship for a centrifugal pump? (Where, D = Impeller diameter, inches H = Head developed, ft of liquid pumped N = Speed of pump, rpm) (A) D = 1840 H0.5 /N (B) D = 1840 N/H0.5 (C) H = 1840 D0.5 /N (D) D = 1840 H/N

Last Answer : (A) D = 1840 H0.5 /N

Discharge from a 24 inch pipe of water at 10 ft/sec will be __________ ft 3 /sec. (A) 7.65 (B) 32.36 (C) 48.22 (D) 125.6

Description : Discharge from a 24 inch pipe of water at 10 ft/sec will be __________ ft 3 /sec. (A) 7.65 (B) 32.36 (C) 48.22 (D) 125.6

Last Answer : (D) 125.6

A vertical column of water will be supported to what height by standard atmospheric pressure. If the Y w = 62.4lb/ft3 po = 14.7 psi.  a. 44.9 ft  b. 33.9 ft  c. 22.9 ft  d. 55.9 ft formula: ho= po/Yw

Description : A vertical column of water will be supported to what height by standard atmospheric pressure. If the Y w = 62.4lb/ft3 po = 14.7 psi.  a. 44.9 ft  b. 33.9 ft  c. 22.9 ft  d. 55.9 ft formula: ho= po/Yw

Last Answer : 33.9 ft

If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Description : If w is the weight of water per cubic metre, Q is the discharge in cubic metres per sec and H is the total head, the required water horse power of the pump, is (A) wQH/15 (B) wQH/360 (C) wQH/220 (D) wQH/550

Last Answer : (A) wQH/15

A certain gas, with cp = 0.529Btu/ lb. °Rand R = 96.2ft.lb/lb. °R, expands from 5 cu ft and 80°F to 15 cu ft while the pressure remains constant at 15.5psia. Compute for T2.  a.1520°R  b. 1620°R  c. 1720°R  d. 1820°R formula: T2= T1V2/V1

Description : A certain gas, with cp = 0.529Btu/ lb. °Rand R = 96.2ft.lb/lb. °R, expands from 5 cu ft and 80°F to 15 cu ft while the pressure remains constant at 15.5psia. Compute for T2.  a.1520°R  b. 1620°R  c. 1720°R  d. 1820°R formula: T2= T1V2/V1

Last Answer : 1620°R

A certain gas, with cp = 0.529Btu/lb.°R and R = 96.2 ft.lb/lb.°R, expands from 5 cu ft and 80°F to 15 cu ft while the pressure remains constant at 15.5 psia. Compute for T2. (Formula: T2= T1V2/V1)  a. 460°R  b. 270°R  c. 1620 °R  d. None of the above

Description : A certain gas, with cp = 0.529Btu/lb.°R and R = 96.2 ft.lb/lb.°R, expands from 5 cu ft and 80°F to 15 cu ft while the pressure remains constant at 15.5 psia. Compute for T2. (Formula: T2= T1V2/V1)  a. 460°R  b. 270°R  c. 1620 °R  d. None of the above

Last Answer : 1620 °R

Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) NPSH required (B) BHP required by the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Description : Consider a centrifugal pump having a specific impeller diameter, fixed impeller speed pumping a liquid of constant density at a particular discharge capacity. With decrease in the capacity of the pump, the __________ decreases. (A) ... the pump (C) Head of the liquid pumped (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Description : An automobile weighing 2800 lb and travelling at 30 miles/hr, hits a depression in the road which has a radius of curvature of 50 ft. What is the total force to which springs are subjected. a.8230 lb b.6170 lb c.2800 ib d.107 dynes e.3280 lb

Last Answer : b. 6170 lb

The two sides of a tringle are increasing at the rate of 1/2 ft/sec with their included angle decreasing at the rate of π/90 rad/sec. What is the rate of change of area when the sides and the included angle are respectively 5 ft,8 ft, and 60°?

Description : The two sides of a tringle are increasing at the rate of 1/2 ft/sec with their included angle decreasing at the rate of π/90 rad/sec. What is the rate of change of area when the sides and the included angle are respectively 5 ft,8 ft, and 60°?

Last Answer : Area = (L1 L2) sin(angle) , where L1, L2 and and angle are functions of time t. Take the derivative using the multiplication rule. The derivative will equal (L1L2)(derivative of sin) + sin times ... will have to use the multiplication rule a second time to get the derivative of L1 L2. Good luck.

A liquid is pumped at the rate of 600 litres using 1000 rpm. If the rpm is changed to 1100, the liquid pumped is __________ litres. (A) 600(B) 660 (C) 1.1 (D) 60

Description : A liquid is pumped at the rate of 600 litres using 1000 rpm. If the rpm is changed to 1100, the liquid pumped is __________ litres. (A) 600 (B) 660 (C) 1.1 (D) 60

Last Answer : (B) 660

When the head pumped against is less than the head of the fluid used for pumping, the usual device is a/an (A) Ejector (B) Blower (C) Injector (D) Airlift

Description : When the head pumped against is less than the head of the fluid used for pumping, the usual device is a/an (A) Ejector (B) Blower (C) Injector (D) Airlift

Last Answer : (D) Airlift

What is the rate 55 mi h ft s?

Description : What is the rate 55 mi h ft s?

Last Answer : 55 miles per hour is 80.66... (repeating) feet per second.

A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Description : A fluid (µ/ρ) = 0.01 cm2 /sec is moving at critical flow condition (NRe = 2100) through a pipe of dia 3 cms. Velocity of flow is __________ cm/sec. (A) 7 (B) 700 (C) 7000 (D) 630

Last Answer : (A) 7

The approximate height of a blast furnace having a useful volume of 2000 m3is about __________ metres (A) 25 (B) 35 (C) 55 (D) 75

Description : The approximate height of a blast furnace having a useful volume of 2000 m3is about __________ metres (A) 25 (B) 35 (C) 55 (D) 75

Last Answer : (C) 55

The variable required to be known in correlations used for estimating the horse power of a centrifugal gas compressor and hence its cost is P. Inlet pressure Q. Compressor rpm R. Delivery pressure S. Volumetric flow rate at inlet. (A) P, Q and R (B) P and R (C) R and S (D) P, Rand S

Description : The variable required to be known in correlations used for estimating the horse power of a centrifugal gas compressor and hence its cost is P. Inlet pressure Q. Compressor rpm R. Delivery pressure S. Volumetric flow rate at inlet. (A) P, Q and R (B) P and R (C) R and S (D) P, Rand S

Last Answer : (A) P, Q and R

A fluid flows in a steady manner between two section in a flow line at section 1: A 1 = 1ft², V1 = 100fpm, volume1 of 4ft³/lb. at sec2: A2 = 2 ft², p= 0.20 lb/ft³ calculate the velocity at section 2.  a. 625 fpm  b. 567 fpm  c. 356 fpm  d. None of the above

Description : A fluid flows in a steady manner between two section in a flow line at section 1: A 1 = 1ft², V1 = 100fpm, volume1 of 4ft³/lb. at sec2: A2 = 2 ft², p= 0.20 lb/ft³ calculate the velocity at section 2.  a. 625 fpm  b. 567 fpm  c. 356 fpm  d. None of the above

Last Answer : 625 fpm

It is observed that the total pressure exerted by air on the man of average size is around 14.7 lb wt. per square inch. But the man feels quite comfortable,. It is because of-----? A. An equal and opposite pressure acts from inside (Answer) B. of the height of a man C. of gravity D. Earth pulls the man upward E. None of these

Description : It is observed that the total pressure exerted by air on the man of average size is around 14.7 lb wt. per square inch. But the man feels quite comfortable,. It is because of-----? A. An equal and ... B. of the height of a man C. of gravity D. Earth pulls the man upward E. None of these

Last Answer : A. An equal and opposite pressure acts from inside (Answer)

Crude oil is pumped by a __________ pump. (A) Gear (B) Centrifugal

Description : Crude oil is pumped by a __________ pump. (A) Gear (B) Centrifugal

Last Answer : (B) Centrifugal

Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Description : Medium viscosity lubricating oil can be most ideally pumped by a __________ pump. (A) Vane (B) Piston (C) Centrifugal (D) Plunger

Last Answer : (A) Vane

Slurries can be most conveniently pumped by a __________ pump. (A) Screw (B) Reciprocating (C) Gear (D) Centrifuga

Description : Slurries can be most conveniently pumped by a __________ pump. (A) Screw (B) Reciprocating (C) Gear (D) Centrifuga

Last Answer : (D) Centrifuga

In a counter-current liquid extractor (A) Both liquids flow at fixed rate (B) Both liquids can have any desired flow rate (C) Only one of the liquids may be pumped at any desired rate (D) Liquid’s flow rate depends upon the temperature and pressure

Description : In a counter-current liquid extractor (A) Both liquids flow at fixed rate (B) Both liquids can have any desired flow rate (C) Only one of the liquids may be pumped at any desired rate (D) Liquid’s flow rate depends upon the temperature and pressure

Last Answer : (C) Only one of the liquids may be pumped at any desired rate

What is tje velocity of a ball thrown upward at 16 ft/sec?

Description : What is tje velocity of a ball thrown upward at 16 ft/sec?

Last Answer : If a ball is thrown vertically upward with a velocity of 160 ft/s, then its height after t seconds is s = 160t - 16t^2. If a ball is thrown vertically upward with a velocity of 160 ft/s, then its height after t seconds is s = 160t − 16t^2.

What is the boiling point of water at an elevation of 1.55 and times104 ft?

Description : What is the boiling point of water at an elevation of 1.55 and times104 ft?

Last Answer : The boiling point of water at this altitude is 84,2 oC.

The oil is leaking from a drum at a rate of `16 cm^(3)//sec`. If the radius and height of drum are 7 cm and 60 cm respectively, find the rate of chang

Description : The oil is leaking from a drum at a rate of `16 cm^(3)//sec`. If the radius and height of drum are 7 cm and 60 cm respectively, find the rate of chang

Last Answer : The oil is leaking from a drum at a rate of `16 cm^(3)//sec`. If the radius and height of drum ... height of oil when height of oil in drum is 18 cm.

A man of height 160 cm walks at a rate of 1.1` m/sec from a lamp post which 6m high. Find the rate at which the length of his shadow increases when he

Description : A man of height 160 cm walks at a rate of 1.1` m/sec from a lamp post which 6m high. Find the rate at which the length of his shadow increases when he

Last Answer : A man of height 160 cm walks at a rate of 1.1` m/sec from a lamp post which 6m high. Find ... shadow increases when he is 1m away from the lamp post.

The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Description : The maximum velocity of a body in SHM with amplitude of 150 mm and a frequency 2 vibrations/sec is equal to a.1.885 m/sec b.0.01885 m/sec c.0.1885 m/sec d.18.55 m/sec e.185.5 m/sec

Last Answer : a. 1.885 m/sec

Flue gas discharge velocity through chimney of a big thermal power plant may be around __________ m/sec. (A) 0.5 (B) 10 (C) 50 (D) 500

Description : Flue gas discharge velocity through chimney of a big thermal power plant may be around __________ m/sec. (A) 0.5 (B) 10 (C) 50 (D) 500

Last Answer : (B) 10

Latent heat absorbed by 1 lb of water at 212°F, when it is changed to steam at 212°F, may be around __________ BTU. (A) 180 (B) 970 (C) 3.97 (D) None of these

Description : Latent heat absorbed by 1 lb of water at 212°F, when it is changed to steam at 212°F, may be around __________ BTU. (A) 180 (B) 970 (C) 3.97 (D) None of these

Last Answer : (A) 180

Sensible heat absorbed by 1 lb of water when it is heated from 32 to 212°F may be around __________ BTU. (A) 180 (B) 970 (C) 3.97 (D) Data insufficient, can't be predicted

Description : Sensible heat absorbed by 1 lb of water when it is heated from 32 to 212°F may be around __________ BTU. (A) 180 (B) 970 (C) 3.97 (D) Data insufficient, can't be predicted

Last Answer : (A) 180

What is the optimum reverberation time at 500 Hz for a cinema? A. 0.8 – 1.2 sec. B. 0.9 – 1.3 sec. C. 0.6 – 0.8 sec. D. 0.45 – 0.55 sec.

Description : What is the optimum reverberation time at 500 Hz for a cinema? A. 0.8 – 1.2 sec. B. 0.9 – 1.3 sec. C. 0.6 – 0.8 sec. D. 0.45 – 0.55 sec.

Last Answer : A. 0.8 – 1.2 sec.

The head developed by a centrifugal pump is largely determined by the (A) Power of the pump(B) Nature of the liquid being pumped(C) Angle of the vanes and the speed of the tip of the impeller(D) Vapour pressure of the liquid

Description : The head developed by a centrifugal pump is largely determined by the (A) Power of the pump (B) Nature of the liquid being pumped (C) Angle of the vanes and the speed of the tip of the impeller (D) Vapour pressure of the liquid

Last Answer : (C) Angle of the vanes and the speed of the tip of the impeller

Which of the following terms indicates the amount of blood pumped out of the ventricle with each contraction of the heart? a) Stroke volume Stroke volume is the amount of blood pumped out (ejected) with each contraction of the heart (heart beat). Stroke volume times heart rate equals cardiac output.

Description : Which of the following terms indicates the amount of blood pumped out of the ventricle with each contraction of the heart? a) Stroke volume Stroke volume is the amount of blood pumped out ( ... d) Preload Preload is the pressure created by a volume of blood within a ventricle before contraction.

Last Answer : a) Stroke volume Stroke volume is the amount of blood pumped out (ejected) with each contraction of the heart (heart beat). Stroke volume times heart rate equals cardiac output.

The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Description : The capacity of a classifier in 'tons of solid/hr' is given by (where, A = cross-sectional area in m2 , V = rising velocity of fluid in m/sec, S = percentage of solids in the suspension by volume, ρ = density of solids in kg/m3 ) (A) 3.6 AVS.ρ (B) 3.6 A.V.ρ (C) 3.6 A.S. ρ (D) 3.6 AVS/ρ

Last Answer : (A) 3.6 AVS.ρ

Fluid present in dense connective tissue and cartilage in ml/kg body weight is about (A) 10 (B) 20 (C) 45 (D) 55

Description : Fluid present in dense connective tissue and cartilage in ml/kg body weight is about (A) 10 (B) 20 (C) 45 (D) 55

Last Answer : Answer : C

Tray spacing in a distillation column of dia 10-12 ft. used in petroleum refinery may be around __________ inches. (A) 5 (B) 30 (C) 60 (D) 100

Description : Tray spacing in a distillation column of dia 10-12 ft. used in petroleum refinery may be around __________ inches. (A) 5 (B) 30 (C) 60 (D) 100

Last Answer : (B) 30

A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Description : A rocket is fired vertically from the ground with a resultant vertical acceleration of 10 m/sec the fuel is finished in one minute and it continues to move up. The maximum height reached will be a.2 km b.20 km c.36 km d.10 km e.80 km

Last Answer : a. 2 km

A stone of wight 100 kg is thrown vertically upwards by a man of height y = 1.8 m with an initial velocity of 20 m/sec. The maximum height to which it will rise would be a.22.2 m b.26 m c.15.1 m d.20.2 m e.10 m

Description : A stone of wight 100 kg is thrown vertically upwards by a man of height y = 1.8 m with an initial velocity of 20 m/sec. The maximum height to which it will rise would be a.22.2 m b.26 m c.15.1 m d.20.2 m e.10 m

Last Answer : a. 22.2 m

A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the power consumed now will be __________ hp. (A) 0.5 (B) 2 (C) 4 (D) 1

Description : A centrifugal pump has the following specifications: Power = 4 H.P.; Speed = 800 rpm Head = 8 metres Flow = 1000 litres/minutes. If its speed is halved, the power consumed now will be __________ hp. (A) 0.5 (B) 2 (C) 4 (D) 1

Last Answer : (A) 0.5

The rate of change of moment of momentum represents the __________ by the fluid. (A) Torque applied (B) Force exerted (C) Work done (D) Power developed

Description : The rate of change of moment of momentum represents the __________ by the fluid. (A) Torque applied (B) Force exerted (C) Work done (D) Power developed

Last Answer : (A) Torque applied

Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Description : Consider a CSMA/CD network that transmits data at a rate of 100 Mbps (108 bits per second) over a 1 km (kilometre) cable with no repeaters. If the minimum frame size required for this network is 1250 bytes, what is the signal speed (km/sec) in the cable? a. 8000 b. 10000 c. 16000 d. 20000

Last Answer : d. 20000

The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. Flourish in the presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Description : The Brake Horse power of the motor (efficiency 60%) required for a pump of capacity 0.075 cumec for a total lift of 12 m, is A. 10 B. 15 C. 20 D. 25 Q No: 44 Aerobic bacterias A. ... presence of free oxygen B. Consume organic matter as their food C. Oxidise organic matter in sewage D. All the above

Last Answer : ANS: D