Latent heat absorbed by 1 lb of water at 212°F, when it is changed to steam at 212°F, may be around __________ BTU. (A) 180 (B) 970 (C) 3.97 (D) None of these

Latent heat absorbed by 1 lb of water at 212°F, when it is changed to

steam at 212°F, may be around __________ BTU.

(A) 180

(B) 970

(C) 3.97

(D) None of these

by

1 Answer

Answer :

(A) 180

by

Related questions

Sensible heat absorbed by 1 lb of water when it is heated from 32 to 212°F may be around __________ BTU. (A) 180 (B) 970 (C) 3.97 (D) Data insufficient, can't be predicted

Description : Sensible heat absorbed by 1 lb of water when it is heated from 32 to 212°F may be around __________ BTU. (A) 180 (B) 970 (C) 3.97 (D) Data insufficient, can't be predicted

Last Answer : (A) 180

Heat in BTU necessary to increase the temperature of 1 lb of gas and its accompanying vapour by 1°F is called the (A) Latent heat (B) Humid heat (C) Specific heat (D) Sensible heat

Description : Heat in BTU necessary to increase the temperature of 1 lb of gas and its accompanying vapour by 1°F is called the (A) Latent heat (B) Humid heat (C) Specific heat (D) Sensible heat

Last Answer : (C) Specific heat

Find ∫ for steam at 100 psia and 600°F.If h = 1329.6 and v = 6.216  a. 1214 Btu / lb  b. 1234 Btu /lb  c. 1342 Btu / lb  d. 1324 Btu /lb formula: ∫ = h– pv/ J

Description : Find ∫ for steam at 100 psia and 600°F.If h = 1329.6 and v = 6.216  a. 1214 Btu / lb  b. 1234 Btu /lb  c. 1342 Btu / lb  d. 1324 Btu /lb formula: ∫ = h– pv/ J

Last Answer : 1214Btu / lb

n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In each batch about 120 kgs of material is dried. a. The quantity of moisture removed per batch. b. What is the total quantity ( sensible & latent) of heat required to evaporate the moisture, if the latent heat of water is 540 kcal/kg at atmospheric conditions, Ignore heat absorbed by the solids c. Find the quantity of steam required for the drying process (per batch), if steam at 4 kg/cm2 is used for generating hot air in the dryer and the dryer efficiency is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Description : n a chemical factory where dyes are made, wet cake at 30 OC consisting of 60% moisture  is put in a dryer to obtain an output having only 5% moisture, at atmospheric pressure. In  each batch about 120 ... dryer and the dryer efficiency  is 80%. Latent heat of steam at 4 kg/cm2 is 520 kcal/kg.

Last Answer : Given that   Qty of material dried per batch - 120 Kgs  Moisture at inlet - 60% a. The quantity of moisture removed per batch.  Water quantity in a wet batch - 120 x 0.6 = 72 Kgs.  Quantity of bone dry ... - 48/0.95 = 50.5 Kgs.  Equivalent water in a dry batch - 50.5 - 48 = 2.5 Kgs.

Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Description : Latent heat of dry steam at atmospheric pressure is 539 Kcal/kg; which __________ with increase in the pressure of steam. (A) Decreases (B) Increases (C) Remain same (D) May increase or decrease

Last Answer : (A) Decreases

What is defined as the quantity of heat needed to raise the temperature of one kilogram of water by one degrees Celsius?  a. Kilojoule  b. Btu  c. Kilocalorie  d. Latent heat

Description : What is defined as the quantity of heat needed to raise the temperature of one kilogram of water by one degrees Celsius?  a. Kilojoule  b. Btu  c. Kilocalorie  d. Latent heat

Last Answer : Kilocalorie

The value of gas constant 'R' is (A) 1.987 cal/gm mole °K (B) 1.987 BTU/lb. mole °R (C) Both (A) and (B)(D) Neither (A) nor (B)

Description : The value of gas constant 'R' is (A) 1.987 cal/gm mole °K (B) 1.987 BTU/lb. mole °R (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Description : 2000 kJ of heat is supplied to 500 kg of ice at 0oC. If the latent heat of fusion of ice is 335 kJ/kg then the amount of ice in kg melted will be a) 1.49 b) 83.75 c) 5.97 d) None of the above

Last Answer : c) 5.97

The critical pressure at which the latent heat of vaporisation of steam becomes zero is __________ Kg/cm2. (A) 273.15 (B) 225.65 (C) 100.03 (D) 373.15

Description : The critical pressure at which the latent heat of vaporisation of steam becomes zero is __________ Kg/cm2. (A) 273.15 (B) 225.65 (C) 100.03 (D) 373.15

Last Answer : (B) 225.65

Find the change in internal energy of 5 lb. of oxygen gas when the temperature changes from 100 ˚F to 120 ˚F. CV = 0.157 BTU/lbm-˚R  A.14.7 BTU  B.15.7 BTU  C. 16.8 BTU  D. 15.9 BTU Formula: U= mcv T

Description : Find the change in internal energy of 5 lb. of oxygen gas when the temperature changes from 100 ˚F to 120 ˚F. CV = 0.157 BTU/lbm-˚R  A.14.7 BTU  B.15.7 BTU  C. 16.8 BTU  D. 15.9 BTU Formula: U= mcv T

Last Answer : 15.7 BTU

The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Description : The heat absorbed by a unit mass of a material at its holding point in order to convert the material into a gas at the same temperature.  a. Latent Heat of Sublimation  b. Latent Heat of Vaporization  c. Latent Heat of Fusion  d. Latent Heat Of Condensation

Last Answer : Latent Heat of Vaporization

What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Description : What refers to the amount of energy absorbed or released during a phase-change process?  A. Molar heat  B. Latent heat  C. Vaporization heat  D. Condensation heat

Last Answer : Latent heat

How much water does a 180 lb person need to drink to lose weight?

Description : How much water does a 180 lb person need to drink to lose weight?

Last Answer : Water is not a magic potion that will make you lose weight. Youneed to drink 8 glasses of water per day to be healthy. Other thanthat, if you want to lose weight, cut down on the junk food andsugary drinks and exercise more. Eat healthy and eat less and youwill lose weight.

With rise of boiling point of a water, what will be the latent heat of steam? -Do You Know?

Description : With rise of boiling point of a water, what will be the latent heat of steam? -Do You Know?

Last Answer : answer:

Burns caused by steam are much severe than those caused by boiling water because – (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Description : Burns caused by steam are much severe than those caused by boiling water because – (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Last Answer : (2) Steam has latent heat Explanation: When water changes into steam, it absorbs latent heat, and when steam condenses to form water, it gives out an equal amount of latent heat. Bums caused ... boiling water, simply because steam contains more heat (in the form of latent heat) than boiling water.

Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 100°C causes more severe burns than water at 100° C because – (1) steam has no specific heat capacity (2) steam has latent heat of vaporization (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer : (2) steam has latent heat of vaporization Explanation: It is because steam releases its latent heat as it condenses, which is substantial. The heat of vaporization of steam is over 2000 J per gram. And when it releases that it's then 100 degree water, the same as boiling water.

With rise of boiling point of a water, what will be the latent heat of steam?

Description : With rise of boiling point of a water, what will be the latent heat of steam?

Last Answer : Decreases

With rise of boiling point of a water, what will be the latent heat of steam?

Description : With rise of boiling point of a water, what will be the latent heat of steam?

Last Answer : Decreases

Describe any two sources of air leak in surface condenser. Also describe effect of air leak on latent heat of steam and cooling water requirements.

Description : Describe any two sources of air leak in surface condenser. Also describe effect of air leak on latent heat of steam and cooling water requirements.

Last Answer : ✓ The main sources of air leakage found in condenser are given below: 1) There is leakage of air from atmosphere at the joint of the parts which are internally under a pressure less ... hence evaporation enthalpy of steam increases therefore more amount of cooling water required in the condenser. 

Burns caused by steam are much severe than those caused by boiling water because (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Description : Burns caused by steam are much severe than those caused by boiling water because (1) Steam pierces through the pores of body quickly (2) Steam has latent heat (3) Steam is gas and engulfs the body quickly (4) Temperature of steam is higher

Last Answer : Steam has latent heat

Steam at 1000C causes more severe burns than water at 100° C because (1) steam has no specific heat capacity (2) steam has latent heat of vaporisation (3) water has no specific heat capacity (4) water has latent heat of fusion

Description : Steam at 1000C causes more severe burns than water at 100° C because (1) steam has no specific heat capacity (2) steam has latent heat of vaporisation (3) water has no specific heat capacity (4) water has latent heat of fusion

Last Answer :  steam has latent heat of vaporisation

Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Description : Shatter index of metallurgical coke on 2 inches and 0.5 inch screen should be respectively around __________ percent. (A) 80 and 97 (B) 95 and 100 (C) 40 and 70 (D) 25 and 97

Last Answer : (A) 80 and 97

Which of the following temperatures represents the maximum allowable temperature for the electrolyte of a lead-acid battery? A. 100°F B. 125°F C. 145°F D. 212°F

Description : Which of the following temperatures represents the maximum allowable temperature for the electrolyte of a lead-acid battery? A. 100°F B. 125°F C. 145°F D. 212°F

Last Answer : Answer: B

Calculate the entropy of steam at 60psiawith a quality of 0.8  A. 0.4274 BTU/lbm-˚R  B. 0.7303 BTU/lbm-˚R  C. 1.1577 BTU/lbm-˚R  D. 1.2172 BTU/lbm-˚R Formula: fromthe steamtable at 60 psia: sƒ = 0.4274 BTU/lbm-˚R sƒg = 1.2172 BTU/lbm-˚R) s = sƒ + x sƒg where x = is the quality

Description : Calculate the entropy of steam at 60psiawith a quality of 0.8  A. 0.4274 BTU/lbm-˚R  B. 0.7303 BTU/lbm-˚R  C. 1.1577 BTU/lbm-˚R  D. 1.2172 BTU/lbm-˚R Formula: fromthe steamtable at 60 psia: sƒ = 0.4274 BTU/lbm-˚R sƒg = 1.2172 BTU/lbm-˚R) s = sƒ + x sƒg where x = is the quality

Last Answer : 1.1577 BTU/lbm-˚R

Net calorific value is the gross calorific value less the __________ heat of water in the product of combustion when cooled to 15°C(A) Sensible (B) Latent (C) Sensible and latent (D) None of these.

Description : Net calorific value is the gross calorific value less the __________ heat of water in the product of combustion when cooled to 15°C. (A) Sensible (B) Latent (C) Sensible and latent (D) None of these

Last Answer : (C) Sensible and latent

Removal of __________ heat is involved in the condensation of a vapor under saturated conditions. (A) Super (B) Sensible (C) Latent (D) Both (B) & (C)

Description : Removal of __________ heat is involved in the condensation of a vapor under saturated conditions. (A) Super (B) Sensible (C) Latent (D) Both (B) & (C)

Last Answer : (B) Sensible

High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Description : High __________ is an undesirable property for a good refrigerant. (A) Specific heat (B) Latent heat of vaporisation (C) Viscosity (D) Specific vapor volume

Last Answer : (C) Viscosity

Dew point temperature always gives an indication of the __________ of the moist air. (A) Dryness (B) Moisture content (C) Coolness (D) Latent heat

Description : Dew point temperature always gives an indication of the __________ of the moist air. (A) Dryness (B) Moisture content (C) Coolness (D) Latent heat

Last Answer : (B) Moisture content

Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Description : Heat sensitive materials with very high latent heat of vaporisation may be economically separated using (A) Liquid extraction (B) Distillation (C) Evaporation (D) Absorption

Last Answer : (A) Liquid extraction

The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot be recovered by distillation (C) Its recovery cost by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Description : The solvent used in liquid extraction should not have high latent heat of vaporisation, because (A) The pressure drop and hence the pumping cost will be very high (B) It cannot ... by distillation may be prohibitively high (D) It will decompose while recovering by distillation

Last Answer : (C) Its recovery cost by distillation may be prohibitively high

One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Description : One kilogram of water at 0°C is changed to superheated steam of one atm pressure and 300° C. The major heat consumption in the process will be to (A) Heat the water from 0°C to 100°C (B) Evaporate the water (C) To superheat the steam (D) Data insufficient, can't be predicted

Last Answer : (B) Evaporate the water

64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heating value around 13, 200 BTU/1b (B) Ash and heating value around 13, 200 BTU/1b (C) Fixed carbon and heating value around 132 BTU/1b (D) None of these

Description : 64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heating value around 13, 200 BTU/1b (B) Ash and heating value around 13, 200 BTU/1b (C) Fixed carbon and heating value around 132 BTU/1b (D) None of these

Last Answer : (A) Fixed carbon and having a heating value around 13, 200 BTU/1b

Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Description : Steam is throttled to 0.1 MPa with 20 degrees of superheat. (a) What is the quality of throttled steam if its pressure is 0.75 MPa (b) What is the enthalpy of the process?  a) 97.6%,2713 kJ/kg  b) -97.6%, 2713 kJ/kg  c) 87.6%,3713 kJ/kg  d) -87.6%, 3713 kJ/kg

Last Answer : 97.6%,2713 kJ/kg

Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Description : Overall heat transfer co-efficient for cooling of hydrocarbons by water is about (A) 50 -100 Kcal/hr.m2 .°C (B) 50 -100 W/m2 .°K (C) 50 -100 BTU/hr. ft. 2°F (D) 1000 - 1500 BTU/hr. ft. 2°F

Last Answer : (C) 50 -100 BTU/hr. ft. 2°F

The unit of heat transfer co-efficient is (A) BTU/hr. ft 2°F (B) BTU/hr. °F. ft (C) BTU/hr. °F (D) BTU/hr. ft

Description : The unit of heat transfer co-efficient is (A) BTU/hr. ft 2°F (B) BTU/hr. °F. ft (C) BTU/hr. °F (D) BTU/hr. ft

Last Answer : (A) BTU/hr. ft 2°F

Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity (C) In unsteady state heat conduction, heat flows in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Description : Pick out the correct statement. (A) 1 kcal/hr.m.°C is equal to 1 BTU/hr. ft.°F (B) In steady state heat conduction, the only property of the substance which determines the ... in the direction of temperature rise (D) In heat transfer by forced convection, Grashoff number is very important

Last Answer : (B) In steady state heat conduction, the only property of the substance which determines the temperature distribution, is the thermal conductivity

64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heat value of 13, 200 BTU/1b (B) Ash and a heating value of 13, 200 BTU/1b (C) Fixed carbon and a heating value of 132 BTU/1b (D) None of these

Description : 64-132) rank coal (ASTM) means a coal with 64% (A) Fixed carbon and having a heat value of 13, 200 BTU/1b (B) Ash and a heating value of 13, 200 BTU/1b (C) Fixed carbon and a heating value of 132 BTU/1b (D) None of these

Last Answer : (A) Fixed carbon and having a heat value of 13, 200 BTU/1b

One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Description : One ton of refrigeration capacity is equivalent to the heat removal rate of (A) 50 kcal/hr (B) 200 BTU/hr (C) 200 BTU/minute

Last Answer : (C) 200 BTU/minute

One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW

Description : One ton of refrigeration is not equivalent to the heat removal rate of (A) 200 BTU/minute (B) 50 kcal/minute (C) 50 kJ/sec (D) 3.5 KW

Last Answer : (C) 50 kJ/sec

Percentage of the heavy water in ordinary water is around (A) 0.015 (B) 7.54 (C) 0.71 (D) 32.97

Description : Percentage of the heavy water in ordinary water is around (A) 0.015 (B) 7.54 (C) 0.71 (D) 32.97

Last Answer : (A) 0.015

Percentage of heavy water in ordinary water is around (A) 0.015 (B) 7.54 (C) 0.71 (D) 32.97

Description : Percentage of heavy water in ordinary water is around (A) 0.015 (B) 7.54 (C) 0.71 (D) 32.97

Last Answer : (A) 0.015

A 3 phase 50 Hz induction motor has full load speed of 970 rpm. Calculate no of poles and slip frequency.

Description : A 3 phase 50 Hz induction motor has full load speed of 970 rpm. Calculate no of poles and slip frequency.

Last Answer : The number of poles in an induction motor can be calculated using the following formula: No. of poles = (120 * frequency) / speed In this case, the number of poles would be calculated as follows: No. of poles = ( ... ) - 50 Hz = 8.08 Hz So the motor has 6 poles and a slip frequency of 8.08 Hz.

What is 970 divided by 10?

Description : What is 970 divided by 10?

Last Answer : 97

My Kenmore model No: 970-570920 refrigerator both side working very good bud only stop defrost time, each 6 hours stop one time. this is problem ?

Description : My Kenmore model No: 970-570920 refrigerator both side working very good bud only stop defrost time, each 6 hours stop one time. this is problem ?

Last Answer : Contact the kenmore and post the question in their website and they will provide you the solution and in some cases they will repalce you with a new one.

How does the John Deer 970 compare to other lawn tractors?

Description : How does the John Deer 970 compare to other lawn tractors?

Last Answer : JOHN DEERe 970 was made from 1989 to 1998. The original price was 16,500. The engine was 4-cyl, 8.5gal and had 33hp. To compare to others or see or information click this site. http://www.tractordata.com/farm-tractors/000/1/5/153-john-deere-970.html

What is the recommended minimum range of illumination required by BS EN 970 for inspection of a welded surface? a) 90 to 125 lux b) 150 to 250 lux c) 350 to 500 lux d) 35 to 50 lux

Description : What is the recommended minimum range of illumination required by BS EN 970 for inspection of a welded surface? a) 90 to 125 lux b) 150 to 250 lux c) 350 to 500 lux d) 35 to 50 lux

Last Answer : c) 350 to 500 lux

What BSEN standard is used for welding symbols on drawings? a) BS EN 970 b) BS EN 287 c) BS EN 22553 d) BS EN 4515

Description : What BSEN standard is used for welding symbols on drawings? a) BS EN 970 b) BS EN 287 c) BS EN 22553 d) BS EN 4515

Last Answer : c) BS EN 22553

1 BTU/hr.ft.°F is equal to __________ kcal/hr. m.°C. (A) 1.49 (B) 1 (C) 4.88 (D) None of these

Description : 1 BTU/hr.ft.°F is equal to __________ kcal/hr. m.°C. (A) 1.49 (B) 1 (C) 4.88 (D) None of these

Last Answer : (A) 1.49

Acid dew point temperature (ADT) of a flue gas produced by the combustion of a fuel containing 1% sulphur may be about __________ °C. (A) 80 (B) 130 (C) 180 (D) 250

Description : Acid dew point temperature (ADT) of a flue gas produced by the combustion of a fuel containing 1% sulphur may be about __________ °C. (A) 80 (B) 130 (C) 180 (D) 250

Last Answer : (B) 130