KOH solution used in Orsat apparatus absorbs (A) CO2 (B) SO2 (C) Both (A) & (B) (D) Neither (A) nor (B)

KOH solution used in Orsat apparatus absorbs
(A) CO2
(B) SO2
(C) Both (A) & (B)
(D) Neither (A) nor (B)
by

1 Answer

Answer :

(C) Both (A) & (B)
by

Related questions

If CO2 is not fully absorbed by the KOH solution meant for its absorption in the orsat apparatus, it will appear as (A) O2 (B) CO (C) N2 (D) SO2

Description : If CO2 is not fully absorbed by the KOH solution meant for its absorption in the orsat apparatus, it will appear as (A) O2 (B) CO (C) N2 (D) SO2

Last Answer : (D) SO2

Nitrogen present in the flue gas is determined in the Orsat apparatus by absorbing it in (A) KOH (B) Ammoniacal cuprous chloride (C) Pyrogallol solution(D) None of these

Description : Nitrogen present in the flue gas is determined in the Orsat apparatus by absorbing it in (A) KOH (B) Ammoniacal cuprous chloride (C) Pyrogallol solution (D) None of these

Last Answer : (D) None of these

The pyrogallol solution used in Orsat apparatus can absorb (A) Only O2 (B) Both O2 and CO2 (C) Both O2 and CO (D) All CO, CO2 , and O2

Description : The pyrogallol solution used in Orsat apparatus can absorb (A) Only O2 (B) Both O2 and CO2 (C) Both O2 and CO (D) All CO, CO2 , and O2

Last Answer : (B) Both O2 and CO2

The cuprous chloride used in orsat apparatus can absorb (A) Only CO (B) Both CO and CO2(C) Both CO and O2(D) All CO, CO2, and O2

Description : The cuprous chloride used in orsat apparatus can absorb (A) Only CO (B) Both CO and CO2 (C) Both CO and O2 (D) All CO, CO2 , and O2

Last Answer : (D) All CO, CO2 , and O2

Volumetric composition of flue gas analysed with the Orsat apparatus is : CO2 = 12%, O2 = 8%, CO = nil, N2 = 80%. This flue gas composition indicates that (A) Pure oxygen has been used for combustion (B) Nitrogen percentage in the fuel is very high (C) Excess air has been used for combustion (D) Hydrogen is not present in the fuel

Description : Volumetric composition of flue gas analysed with the Orsat apparatus is : CO2 = 12%, O2 = 8%, CO = nil, N2 = 80%. This flue gas composition indicates that (A) Pure oxygen has been used for combustion ... very high (C) Excess air has been used for combustion (D) Hydrogen is not present in the fuel

Last Answer : (C) Excess air has been used for combustion

Orsat apparatus(A) Gives flue gas analysis on dry basis (B) Determines N2 in flue gas indirectly (C) Can’t determine CO in flue gas, if it is < 0.2% (D) All (A), (B) & (C)

Description : Orsat apparatus (A) Gives flue gas analysis on dry basis (B) Determines N2 in flue gas indirectly (C) Can’t determine CO in flue gas, if it is < 0.2% (D) All (A), (B) & (C)

Last Answer : (D) All (A), (B) & (C)

Orsat apparatus is meant for (A) Gravimetric analysis of flue gas (B) Finding out combustion efficiency (C) Direct determination of nitrogen in flue gas by absorbing it in ammoniacal cuprous chloride (D) None of these

Description : Orsat apparatus is meant for (A) Gravimetric analysis of flue gas (B) Finding out combustion efficiency (C) Direct determination of nitrogen in flue gas by absorbing it in ammoniacal cuprous chloride (D) None of these

Last Answer : (D) None of these

Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Multistage catalytic converter is not used in the (A) Conversion of SO2 to SO3 (B) NH3 synthesis reaction (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (B) NH3 synthesis reaction

Corrosiveness of steam condensate is due to the presence of (A) CO2 (B) Dissolved O2 (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Corrosiveness of steam condensate is due to the presence of (A) CO2 (B) Dissolved O2 (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6.26, CO : 1.56, O2 : 3.91, H2O :15.66, N2 : 72.60 (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02 (C) CO2 : 6.39, CO : 1.60, O2 : 3.99, H2O:25.96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74

Description : A sample of natural gas containing 80% methane (CH4 ) and rest nitrogen (N2 ) is burnt with 20% excess air. With 80% of the combustibles producing CO2 and the remainder going to CO, the Orsat analysis in volume percent is (A) CO2 : 6 ... 96, N2 :72.06 (D) CO2 : 7.60, CO : 1.90, O2 : 4.75, N2 : 85.74

Last Answer : (B) CO2 : 7.42, CO : 1.86, O2 : 4.64, N2 :86.02

What is the use of KOH solution in the experiment to show that CO2 is given out during respiration?

Description : What is the use of KOH solution in the experiment to show that CO2 is given out during respiration?

Last Answer : Answer. During the experiment, germinating seeds give out CO2 which is absorbed by KOH. Thus a partial vacuum is created in the flask due to which water level rises in the tube.

Diffusion in concentrated solutions differs from that in dilute solutions, because of the change in the __________ with the concentration of the solution. (A) Degree of ideality (B) Viscosity (C) Both 'a '& 'b' (D) Neither 'a' nor 'b'

Description : Diffusion in concentrated solutions differs from that in dilute solutions, because of the change in the __________ with the concentration of the solution. (A) Degree of ideality (B) Viscosity (C) Both 'a '& 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a '& 'b

In case of constant underflow extraction operation, the __________ atall solute concentration.(A) Solids are drained to the same extent(B) Ratio of the insoluble to solution is constant(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : In case of constant underflow extraction operation, the __________ atall solute concentration. (A) Solids are drained to the same extent (B) Ratio of the insoluble to solution is constant (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

If an ideal solution is formed by mixing two pure liquids in any proportion, then the __________ of mixing is zero (A) Enthalpy (B) Volume (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Description : If an ideal solution is formed by mixing two pure liquids in any proportion, then the __________ of mixing is zero (A) Enthalpy (B) Volume (C) Both 'a' & 'b' (D) Neither 'a' nor 'b'

Last Answer : (C) Both 'a' & 'b'

If two pure liquid constituents are mixed in any proportion to give an ideal solution, there is no change in (A) Volume (B) Enthalpy (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : If two pure liquid constituents are mixed in any proportion to give an ideal solution, there is no change in (A) Volume (B) Enthalpy (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Diffusion co-efficient of a metal in a solid solution depends upon its (A) Composition (B) Temperature (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Main pollutants released from iron & steel industry is (A) CO, CO2 & SO2 (B) H2S, NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Description : Main pollutants released from iron & steel industry is (A) CO, CO2 & SO2 (B) H2S, NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Last Answer : (A) CO, CO2 & SO2

Main pollutants released from petroleum refineries is (A) CO, SO2 & H2S (B) CO2 , NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Description : Main pollutants released from petroleum refineries is (A) CO, SO2 & H2S (B) CO2 , NO & SO3 (C) CO2 , H2S & NO2 (D) SO3 , NO2 & CO2

Last Answer : (A) CO, SO2 & H2S

Lung cancer & DNA breakage are the major ill effects of excessive ozone exposure to human beings. Ozone layer depletion in the atmosphere is mainly caused by the presence of (A) CO2 (B) SO2 (C) Hydrocarbons (D) CFC (chloro fluoro carbon)

Description : Lung cancer & DNA breakage are the major ill effects of excessive ozone exposure to human beings. Ozone layer depletion in the atmosphere is mainly caused by the presence of (A) CO2 (B) SO2 (C) Hydrocarbons (D) CFC (chloro fluoro carbon)

Last Answer : (D) CFC (chloro fluoro carbon)

57. The solution space(region) of an LP problem is unbounded due to a. An incorrect formulation of the LP model b. Objective function is unbounded c. Neither a nor b d. Both a & b

Description : 57. The solution space(region) of an LP problem is unbounded due to a. An incorrect formulation of the LP model b. Objective function is unbounded c. Neither a nor b d. Both a & b

Last Answer : b. Objective function is unbounded c. Neither a nor b

Diffusivity in concentrated solutions differs from that in dilute solutions, because of the changes in (A) Viscosity with concentration (B) Degree of ideality of the solution (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Diffusivity in concentrated solutions differs from that in dilute solutions, because of the changes in (A) Viscosity with concentration (B) Degree of ideality of the solution (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Higher concentration of CO2 in atmosphere (A) Allows visible solar radiation (ultraviolet) of short wave-length to pass through (B) Reflects and absorbs the longer wavelength (infra-red) radiations (C) Prevents solar heat being radiated out completely, resulting in 'heat trap' i.e., global warming (D) All (A), (B) and (C)

Description : Higher concentration of CO2 in atmosphere (A) Allows visible solar radiation (ultraviolet) of short wave-length to pass through (B) Reflects and absorbs the longer wavelength (infra-red) radiations (C) Prevents solar heat being ... in 'heat trap' i.e., global warming (D) All (A), (B) and (C)

Last Answer : (D) All (A), (B) and (C)

Which of the following pollutants, if present in atmosphere is detectable by its odour ? (A) CO (B) SO2 (C) NO2 (D) CO2

Description : Which of the following pollutants, if present in atmosphere is detectable by its odour ? (A) CO (B) SO2 (C) NO2 (D) CO2

Last Answer : (B) SO2

Smog is not formed due to the presence of __________ in the atmosphere. (A) SO2 (B) NOx (C) CO2 (D) Any of these

Description : Smog is not formed due to the presence of __________ in the atmosphere. (A) SO2 (B) NOx (C) CO2 (D) Any of these

Last Answer : (C) CO2

In Orsat's apparatus, ammoniacal cuprous chloride is used for selectivity absorbing (A) CO (B) CO2 (C) O2 (D) H2O

Description : In Orsat's apparatus, ammoniacal cuprous chloride is used for selectivity absorbing (A) CO (B) CO2 (C) O2 (D) H2O

Last Answer : (A) CO

The sequence of absorption in flue gas analysis by Orsat's apparatus is respectively (A) CO2 , O2 , CO (B) CO, O2 , CO2 (C) CO2 , CO, O2

Description : The sequence of absorption in flue gas analysis by Orsat's apparatus is respectively (A) CO2 , O2 , CO (B) CO, O2 , CO2 (C) CO2 , CO, O2

Last Answer : (A) CO2 , O2 , CO

The increasing amount of CO2 in the atmosphere is slowly raising its temperature because it absorbs (a) the infrared part of the solar radiation (b) the ultraviolet part of the solar radiation (c) all the solar radiations (d) the water vapour of the air

Description : The increasing amount of CO2 in the atmosphere is slowly raising its temperature because it absorbs (a) the infrared part of the solar radiation (b) the ultraviolet part of the solar radiation (c) all the solar radiations (d) the water vapour of the air

Last Answer : Ans:(a)

The Koh-i-Nor is a famous diamond - what does the name mean

Description : The Koh-i-Nor is a famous diamond - what does the name mean

Last Answer : Mountain of Light

A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : A bolometer is (A) Used for the measurement of thermal radiation (B) An element which senses optical input and delivers thermal output (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Terylene is (A) Same as Dacron (B) A polyester (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Starting material for the production of SBR is (A) Ethyl alcohol (B) Ethylene (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum(C) Both ‘a’ & ‘b’(D) Neither ‘a’ nor ‘b

Description : Natural rubber is obtained from latex, which is a colloidal dispersion of rubber in water. Which of the following is used as a coagulant in latex? (A) Ammonium alum (B) Potassium alum (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b

Last Answer : (C) Both ‘a’ & ‘b

Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Description : Pick out the correct statement about catalytic polymerisation. (A) H2SO4 polymerisation process gives gasoline rich in unsaturates (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive (C) Both (A) and (B) (D) Neither (A) nor (B

Last Answer : (B) In H2SO4 polymerisation, H3PO4 is always used with 2% steam to prevent meta & ortho H3PO4 formation, which are inactive

Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : Aniline point is the (A) Characteristic property of diesel & lubricating oils (B) Measure of aromatic content of oil (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B

Refractive index of a petrofuel which is the ratio of velocity of light in air to its velocity in the petrofuel gives an indication if its (A) Molecular weight (B) Aromatics content (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b’

Description : Refractive index of a petrofuel which is the ratio of velocity of light in air to its velocity in the petrofuel gives an indication if its (A) Molecular weight (B) Aromatics content (C) Both ‘a’ & ‘b’ (D) Neither ‘a’ nor ‘b’

Last Answer : (C) Both ‘a’ & ‘b

In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : In nuclear reactions, __________ number is conserved. (A) Mass (B) Atomic (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Horsepower required for a roll crusher is directly proportional to its (A) Reduction ratio (B) Capacity(C) Both (A) & (B)(D) Neither (A) nor (B)

Description : Horsepower required for a roll crusher is directly proportional to its (A) Reduction ratio (B) Capacity (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The constants (Kb, Kr and Kk) used in the laws of crushing (i.e., Bond's law, Rittinger's law and Kick's law) depend upon the (A) Feed material (B) Type of crushing machine (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Description : The grinding in a hammer crusher takes place due to the (A) Attrition (B) Impact (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Description : The mechanism of size reduction by a hammer mill is by impact and attrition between the (A) Grinding element & the housing (B) Feed particles (C) Both (A) and (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) and (B)

Additives used for promoting the flocculation of particles is a/an (A) Electrolyte (B) Surface active agent (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Additives used for promoting the flocculation of particles is a/an (A) Electrolyte (B) Surface active agent (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate(B) Pressure(C) Both (A) & (B)(D) Neither (A) nor (B

Description : The cake resistance increases steadily with the time of filtration in a plate and frame filter employing constant __________ filtration. (A) Rate (B) Pressure (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Description : Width and speed of a conveyor belt depends upon the __________ of the material. (A) Lump size (B) Bulk density (C) Both (A) & (B) (D) Neither (A) nor (B

Last Answer : (C) Both (A) & (B)

Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Size reduction of moulding powders, waxes, resins & gums are done in a __________ mill. (A) Cage (B) Hammer (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Close circuit grinding by a ball mill with air sweeping employs a (A) Classifier (B) Cyclone separator between mill & classifier (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Close circuit grinding by a ball mill with air sweeping employs a (A) Classifier (B) Cyclone separator between mill & classifier (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Use of baffles in agitators help in minimising the __________ tendency. (A) Swirling (B) Vortexing (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Use of baffles in agitators help in minimising the __________ tendency. (A) Swirling (B) Vortexing (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : The important dimensional group involved in the power requirement calculation in mixing operation is the __________ number. (A) Reynold's (B) Froude (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Use of grinding aids results in the (A) Enhanced production rate (B) Finer products (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Use of grinding aids results in the (A) Enhanced production rate (B) Finer products (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (D) Neither (A) nor (B)

Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Toothed roll crushers achieve size reduction by (A) Tearing (shear) and compression (B) Impact and attrition (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (C) Both (A) & (B)

Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Description : Separation of isotopes is generally done using a/an __________ centrifuge. (A) Ultra (B) Disk-bowl (C) Both (A) & (B) (D) Neither (A) nor (B)

Last Answer : (A) Ultra